Materials engineering for immunomodulation

PPS nanoparticles as versatile delivery system to induce systemic and broad mucosal immunity after intranasal administration

Degradable polymer nanoparticles (NPs, 50 nm) based on polypropylene sulfide (PPS) were conjugated to thiolated antigen and adjuvant proteins by reversible disulfide bonds and evaluated in mucosal vaccination. Ovalbumin was used as a model antigen, and antigen-conjugated NPs were administered intranasally in the mouse. We show penetration of nasal mucosae, transit via M cells, and uptake by antigen-presenting cells in the nasal-associated lymphoid tissue. Ovalbumin-conjugated NPs induced cytotoxic T lymphocytic responses in lung and spleen tissues, as well as humoral response in mucosal airways. Co-conjugation of the TLR5 ligand flagellin further enhanced humoral responses in the airways as well as in the distant vaginal and rectal mucosal compartments and induced cellular immune responses with a Th1 bias, in contrast with free flagellin. The PPS NP platform thus appears interesting as a platform for intranasally-administered mucosal vaccination for inducing broad mucosal immunity.

Targeted drug delivery to lymphocytes: a route to site-specific immunomodulation?

Lymphocytes are central to the progression of autoimmune disease, transplant rejection, leukemia, lymphoma and lymphocyte-resident viral diseases such as HIV/AIDs. Strategies to target drug treatments to lymphocytes, therefore, represent an opportunity to enhance therapeutic outcomes in disease states where many current treatment regimes are incompletely effective and promote significant toxicities. Here we demonstrate that highly lipophilic drug candidates that preferentially access the intestinal lymphatics after oral administration show significantly enhanced access to lymphocytes leading to improved immunomodulatory activity. When coadministered with such drugs, lipids enhance lymphocyte targeting via a three tiered action: promotion of drug absorption from the gastrointestinal tract, enhancement of lymphatic drug transport and stimulation of lymphocyte recruitment into the lymphatics. This strategy has been exemplified using a highly lipophilic immunosuppressant (JWH015) where coadministration with selected lipids led to significant increases in lymphatic transport, lymphocyte targeting and IL-4 and IL-10 expression in CD4+ and CD8+ lymphocytes after ex vivo mitogen stimulation. In contrast, administration of a 2.5-fold higher dose of JWH015 in a formulation that did not stimulate lymph transport had no effect on antiinflammatory cytokine levels, in spite of equivalent drug exposure in the blood. The current data suggest that complementary drug design and delivery strategies that combine highly lipophilic, lymphotropic drug candidates with lymph-directing formulations provide enhanced selectivity, potency and therapeutic potential for drug candidates with lymphocyte associated targets.

Macrophage and dendritic cell phenotypic diversity in the context of biomaterials

Macrophages (Mϕ) and dendritic cells (DCs) are critical antigen presenting cells that play pivotal roles in host responses to biomaterial implants. Although Mϕs have been widely studied for their roles in the inflammatory responses against biomaterials, the roles that DCs play in the host responses toward implanted materials have only recently been explored. DCs are of significant research interest because of the emergence of a large number of combination products that cross-traditional medical device boundaries. These products combine biomaterials with biologics, including cells, nucleic acids, and/or proteins. The biomaterial component may evoke an inflammatory response, primarily mediated by neutrophils and Mϕs, whereas the biologic component may elicit an immunogenic immune response, initiated by DCs involving lymphocyte activation. Control of Mϕ phenotypic balance from proinflammatory M1 to reparative M2 is a goal of investigators to optimize the host response to biomaterials. Similarly, control of DC phenotype from proinflammatory to toleragenic is of interest in vaccine delivery and tissue engineering/transplantation situations, respectively. This review discusses the interconnection between innate and adaptive immunity, the comparative and contrasting phenotypes and roles of Mϕs and DCs in immunity, their responses to biomaterials and the strategies to modulate their phenotype for applications in tissue engineering and vaccine delivery. Furthermore, the collaboration between and unique roles of DCs and Mϕs needs to be addressed in future studies to gain a more complete picture of host responses toward combination products.

Induction of specific macrophage subtypes by defined micro-patterned structures

In this study, we investigated the influence of different perfluoropolyether (PFPE) microstructures on the inflammatory response of human macrophages. We generated four different microstructured PFPE surfaces by replica molding from silicon masters. The function-associated surface markers 27E10 and CD163 were monitored using flow cytometry to measure the pro- and anti-inflammatory reactions. Inflammatory mediator expression was measured at the protein and mRNA level. Lipopolysaccharide treatment served as positive control for pro-inflammatory activation. We observed that each micropattern induced a specific morphology, phenotype and mediator profile. A microstructure of regular grooves induced a pro-inflammatory phenotype (M1) which was not accompanied by release of pro-inflammatory mediators. However, the larger cylindrical posts induced an anti-inflammatory phenotype (M2) with a remarkable down-regulation of CXCL10. Smaller posts with a shorter distance exhibited a stronger pro-inflammatory response than those with a longer distance, on the levels of both phenotype and mediator release. Regression analysis suggests that the geometrical parameters of the microstructures, specifically the period of structures, may play an important role in macrophage response. Optimization of such microstructures may provide a method to invoke a predictable response of macrophages to implants and control the mediator release.

Interleukin-1 family cytokines as mucosal vaccine adjuvants for induction of protective immunity against influenza virus

A safe and potent adjuvant is needed for development of mucosal vaccines against etiological agents, such as influenza virus, that enter the host at mucosal surfaces. Cytokines are potential adjuvants for mucosal vaccines because they can enhance primary and memory immune responses enough to protect against some infectious agents. For this study, we tested 26 interleukin (IL) cytokines as mucosal vaccine adjuvants and compared their abilities to induce antigen (Ag)-specific immune responses against influenza virus. In mice intranasally immunized with recombinant influenza virus hemagglutinin (rHA) plus one of the IL cytokines, IL-1 family cytokines (i.e., IL-1α, IL-1β, IL-18, and IL-33) were found to increase Ag-specific immunoglobulin G (IgG) in plasma and IgA in mucosal secretions compared to those after immunization with rHA alone. In addition, high levels of both Th1- and Th2-type cytokines were observed in mice immunized with rHA plus an IL-1 family cytokine. Furthermore, mice intranasally immunized with rHA plus an IL-1 family cytokine had significant protection against a lethal influenza virus infection. Interestingly, the adjuvant effects of IL-18 and IL-33 were significantly decreased in mast cell-deficient W/W(v) mice, indicating that mast cells have an important role in induction of Ag-specific mucosal immune responses induced by IL-1 family cytokines. In summary, our results demonstrate that IL-1 family cytokines are potential mucosal vaccine adjuvants and can induce Ag-specific immune responses for protection against pathogens like influenza virus.

Synthesis of pyridyl disulfide-functionalized nanoparticles for conjugating thiol-containing small molecules, peptides, and proteins

Previously we reported emulsion polymerization of propylene sulfide with Pluronic F127 as an emulsifier, yielding nanoparticles (NPs) in the 25 nm size range. Immunologically functional NPs were prepared by adding an antigen-Pluronic conjugate to the polymerization mixture ( Reddy , S. T. , et al. ( 2007 ) Nat. Biotechnol. 25, 1159 ). We sought a more flexible scheme for conjugation of antigens and other biomolecules to the NP surfaces that would allow for milder reaction conditions than achievable during the polymerization step. Here, we present the synthesis of such functionalizable NPs in the form of NPs that carry thiol-reactive groups, to which thiol-containing antigens (peptide or protein) or other biomolecules can be conjugated under mild conditions to yield immunofunctional NPs. The Pluronic-stabilized poly(propylene sulfide) (PPS) NPs with thiol-reactive pyridyl disulfide groups are prepared in two steps by (1) emulsion polymerization of propylene sulfide in the presence of a carboxylate-Pluronic and (2) reaction of the carboxylic acid groups on the NP surface with cysteamine pyridyl disulfide and a water-soluble carbodiimide reagent. We choose pyridyl disulfide groups to have a reduction-sensitive disulfide bond linking the antigen to the NP surface, allowing efficient release of antigen inside the cell in response to the reductive conditions within the endosome. The functionalizable NPs are characterized by proton NMR, dynamic light scattering (DLS), UV/vis spectroscopy, and transmission electron microscopy (TEM). Conjugation of small molecules and protein to the NP surface is presented.

Effects of emulsifier concentration, composition, and order of addition in squalene-phosphatidylcholine oil-in-water emulsions

Development and characterization of stable and biocompatible oil-in-water emulsions is important for improved drug and vaccine delivery. In this work, two-component emulsions consisting of squalene and phosphatidylcholine have been developed. The reproducibility of the manufacturing process is established and production efficiency is improved by altering the order of component addition. The effects of emulsifier concentration and composition on emulsion stability and biocompatibility are assessed through dynamic light scattering, zeta potential measurement, viscosity, and hemolytic activity. High concentrations of egg phosphatidylcholine emulsifier decreased initial particle size and increased initial size polydispersity. However, high emulsifier concentrations also appeared to decrease long-term emulsion stability as well as absolute zeta potential values. Substitution of naturally derived egg phosphatidylcholine with synthetic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) produced an emulsion with similar physicochemical properties and stability.

Lympho-geographical concepts in vaccine delivery

The key triggers and regulators of immune responses are antigens and their appearance in immune-privileged secondary lymphatic organs. Currently, the majority of vaccines are administered intramuscularly or subcutaneously, although neither the muscular tissue nor the subcutis is particularly rich in immuno-competent cells. Thus, introducing antigens at sites with a higher density of immune-competent cells, such as the dermis, lymph nodes, or afferent lymphatic conducts, with appropriate formulations and injection devices may induce more efficacious immune responses and protection. In this work, we first reviewed the geographical and functional map of the most important lymphatic elements that play a key role in the induction of a specific immune response, such as site of injection, choice of adjuvants and etc. In a first set of experiments, we demonstrated that short intervals of boosting (daily versus weekly) increase the production of IgG2a antibody against the injected model antigen, while increasing rather than constant booster doses increase the number of antigen-specific CD8(+) IFN-γ producing cells. Such antigen presentation patterns reflect the initially increasing amounts of antigen associated with natural infections by highly virulent and replicating pathogens. In a second set of experiments, we studied the importance of administration route (subcutaneous, intradermal, intramuscular, intralymphatic) for the induction of antigen-specific IgG2a, and of IFN-γ produced by antigen-specific lymphocytes when using PLGA microparticles for delivery of antigen. Interestingly, both IgG2a and IFN-γ production were significantly enhanced after intramuscular and intra-lymph node administration when compared to the other two routes. In conclusion, the results suggest that traditional vaccination schedules and administration routes should be reconsidered in vaccine development, particularly when using more advanced formulations and delivery systems such as micro- and nanoparticles or combinations of antigen and immune-response modifiers.

Twenty-first century challenges for biomaterials

During the 1960s and 1970s, a first generation of materials was specially developed for use inside the human body. These developments became the basis for the field of biomaterials. The devices made from biomaterials are called prostheses. Professor Bill Bonfield was one of the first to recognize the importance of understanding the mechanical properties of tissues, especially bone, in order to achieve reliable skeletal prostheses. His research was one of the pioneering efforts to understand the interaction of biomaterials with living tissues. The goal of all early biomaterials was to 'achieve a suitable combination of physical properties to match those of the replaced tissue with a minimal toxic response in the host'. By 1980, there were more than 50 implanted prostheses in clinical use made from 40 different materials. At that time, more than three million prosthetic parts were being implanted in patients worldwide each year. A common feature of most of the 40 materials was biological 'inertness'. Almost all materials used in the body were single-phase materials. Most implant materials were adaptations of already existing commercial materials with higher levels of purity to eliminate release of toxic by-products and minimize corrosion. This article is a tribute to Bill Bonfield's pioneering efforts in the field of bone biomechanics, biomaterials and interdisciplinary research. It is also a brief summary of the evolution of bioactive materials and the opportunities for tailoring the composition, texture and surface chemistry of them to meet five important challenges for the twenty-first century.

The role of multiple toll-like receptor signalling cascades on interactions between biomedical polymers and dendritic cells

Biomaterials are used in several health-related applications ranging from tissue regeneration to antigen-delivery systems. Yet, biomaterials often cause inflammatory reactions suggesting that they profoundly alter the homeostasis of host immune cells such as dendritic cells (DCs). Thus, there is a major need to understand how biomaterials affect the function of these cells. In this study, we have analysed the influence of chemically and physically diverse biomaterials on DCs using several murine knockouts. DCs can sense biomedical polymers through a mechanism, which involves multiple TLR/MyD88-dependent signalling pathways, in particular TLR2, TLR4 and TLR6. TLR-biomaterial interactions induce the expression of activation markers and pro-inflammatory cytokines and are sufficient to confer on DCs the ability to activate antigen-specific T cells. This happens through a direct biomaterial-DC interaction although, for degradable biomaterials, soluble polymer molecules can also alter DC function. Finally, the engagement of TLRs by biomaterials profoundly alters DC adhesive properties. Our findings could be useful for designing structure-function studies aimed at developing more bioinert materials. Moreover, they could also be exploited to generate biomaterials for studying the molecular mechanisms of TLR signalling and DC activation aiming at fine-tuning desired and pre-determined immune responses.

Biomaterial-based technologies for brain anti-cancer therapeutics and imaging

Treating malignant brain tumors represents one of the most formidable challenges in oncology. Contemporary treatment of brain tumors has been hampered by limited drug delivery across the blood-brain barrier (BBB) to the tumor bed. Biomaterials are playing an increasingly important role in developing more effective brain tumor treatments. In particular, polymer (nano)particles can provide prolonged drug delivery directly to the tumor following direct intracerebral injection, by making them physiochemically able to cross the BBB to the tumor, or by functionalizing the material surface with peptides and ligands allowing the drug-loaded material to be systemically administered but still specifically target the tumor endothelium or tumor cells themselves. Biomaterials can also serve as targeted delivery devices for novel therapies including gene therapy, photodynamic therapy, anti-angiogenic and thermotherapy. Nanoparticles also have the potential to play key roles in the diagnosis and imaging of brain tumors by revolutionizing both preoperative and intraoperative brain tumor detection, allowing early detection of pre-cancerous cells, and providing real-time, longitudinal, non-invasive monitoring/imaging of the effects of treatment. Additional efforts are focused on developing biomaterial systems that are uniquely capable of delivering tumor-associated antigens, immunotherapeutic agents or programming immune cells in situ to identify and facilitate immune-mediated tumor cell killing. The continued translation of current research into clinical practice will rely on solving challenges relating to the pharmacology of nanoparticles but it is envisioned that novel biomaterials will ultimately allow clinicians to target tumors and introduce multiple, pharmaceutically relevant entities for simultaneous targeting, imaging, and therapy in a unique and unprecedented manner.