A new twofold interpenetrated two-dimensional cadmium(II) coordination polymer constructed from 2,2'-(benzene-1,4-dicarboxamido)dipropionate

In recent years, much initial interest and enthusiasm has focused on the self-assembly of coordination polymers due to the aesthetics of their crystalline architectures and their potential applications as new functional materials. As part of an exploration of chiral coordination polymers, a new twofold interpenetrated two-dimensional (2D) coordination polymer, namely, poly[[tetraaquabis[μ₃-(2R,2'R)-2,2'-(benzene-1,4-dicarboxamido)dipropionato-κ⁵O,O':O'',O''':O'']dicadmium(II)] trihydrate], {[Cd₂(C₁₄H₁₄N₂O₆)₂(H₂O)₄]·3H₂O}_n, has been synthesized by the reaction of Cd(CH₃COO)₂·2H₂O with the designed ligand (2R,2'R)-2,2'-(benzene-1,4-dicarboxamido)dipropionic acid (H₂L). The compound has been structurally characterized by elemental analysis, IR spectroscopy, powder X-ray diffraction and single-crystal X-ray diffraction analysis. In the crystal structure, each Cd^II cation binds to three carboxylate groups from two crystallographically independent L^2- dianions. Four carboxylate groups link two crystallographically independent cadmium cations into a 4,4-connected secondary building unit (SBU). The resulting SBUs are extended into a two-dimensional folding sheet via the terephthalamide moiety of the ligand as a spacer, which can be simplified as a (4,4)-connected 4,4L15 net with the point symbol (3.5³.6²)(3².5².6²). In the lattice, two independent folding sheets interpenetrate each other to yield a double-sheet layer. The resulting 2D layers pack in parallel arrays through intermolecular hydrogen bonds and interlayer π-π interactions. The thermal stability and photoluminescence properties of the title compound have been investigated and it exhibits an enhanced fluorescence emission and a longer lifetime compared with free H₂L.

Zirconium Metal-Organic Framework UiO-66: Stability in an Aqueous Environment and Its Relevance for Organophosphate Degradation

Zirconium-based metal-organic frameworks were recently investigated as catalysts for degradation of organophosphate toxic compounds, such as pesticides or chemical warfare agents. The most utilized UiO-66 is considered as a stable material for these applications in an aqueous environment. However, the presented results indicate that the properties of UiO-66 are changing considerably in aqueous media under common conditions used for organophosphate degradations, and therefore its catalytic activity is not related to the number of structural defects created during the material synthesis. We delineate the stability of UiO-66 in water of various pHs, the in situ formation of new catalytic sites, and the correlation of these two parameters with the degradation rate of a model organophosphate pollutant, dimethyl-4-nitrophenyl phosphate (methyl-paraoxon). The stability was quantified using high-performance liquid chromatography (HPLC) by measuring the amounts of leached terephthalic acid, the linker of UiO-66, and monocarboxylic acids, the modulators bound at UiO-66 defects. We demonstrate that the HPLC analysis is a more suitable method for metal-organic frameworks stability assessment than commonly used methods, e.g., powder X-ray diffraction, adsorption isotherms, or electron microscopy.

Molecular simulations of COFs, IRMOFs and ZIFs for adsorption-based separation of carbon tetrachloride from air

Covalent organic frameworks (COFs), metal organic frameworks (MOFs) and zeolitic imidazolate frameworks (ZIFs) have been widely studied in gas separation applications due to their large surface areas, high pore volumes, tunable pore sizes and chemical stabilities. In this study, separation performances of 153 COFs, 14 IRMOFs and 8 ZIFs were assessed for efficient removal of carbon tetrachloride (CCl₄) from CCl₄/Ar, CCl₄/N₂, CCl₄/O₂ mixtures at 298 K and infinite dilution. The top performing three materials in each group, namely, borazine-linked polymer (BLP-2H-AA), IRMOF-11 and ZIF-6 were identified. Single-component, binary mixture and quaternary mixture adsorption isotherms of argon (Ar), CCl₄, nitrogen (N₂) and oxygen (O₂) in these materials were computed at 298 K and various total pressures from 10^-3 to 1.5 × 10⁴ kPa. Mixture adsorption selectivities and separation potentials were then calculated and the effect of relative humidity on the performance of adsorption-based CCl₄ separation was examined. Single-component and quaternary mixture diffusion coefficients of Ar, CCl₄, N₂ and O₂ were finally computed. Our results showed that ZIF-6 exhibits the highest adsorption selectivity and the highest separation potential for CCl₄/Ar, CCl₄/N₂ and CCl₄/O₂ mixtures, followed by IRMOF-11 and BLP-2H-AA. Results of this computational study will be highly useful to identify the promising materials for removal of CCl₄ from air.

Polyaniline-Encapsulated Metal-Organic Framework MIL-101: Adsorbent with Record-High Adsorption Capacity for the Removal of Both Basic Quinoline and Neutral Indole from Liquid Fuel

Polyaniline-encapsulated metal-organic frameworks (MOFs; MIL-101, Cr-benzenedicarboxylate) were prepared via a ship-in-bottle strategy and applied in liquid phase adsorptions. The modified MIL-101s showed record-high adsorptions for both basic and neutral nitrogen-containing compounds (NCCs) from liquid model fuel. For example, the maximum adsorption capacities ( Q_o) of the protonated polyaniline (pANI)@MIL-101 for the basic quinoline and neutral indole from n-octane were 556 and 602 mg/g, respectively. The plausible adsorption mechanisms such as hydrogen bonding, acid-base interaction, and cation-π interaction were proposed to explain the extraordinary adsorptions of the studied adsorbates. Moreover, the adsorbents could be recycled via a simple approach and reused in adsorptions without noticeable decrease in performances. Therefore, the pANI-encapsulated MOFs could be recommended as a new type of adsorbents for very efficient removal of both basic and neutral NCCs from liquid fuel.

Chemical Protective Textiles of UiO-66-Integrated PVDF Composite Fibers with Rapid Heterogeneous Decontamination of Toxic Organophosphates

Metal-organic frameworks (MOFs) are a new and growing area of materials with high porosity and customizability. UiO-66, a zirconium-based MOF, has shown much interest to the military because of the ability of the MOF to catalytically decontaminate chemical warfare agents (CWAs). Unfortunately, the applications for MOFs are limited because of their powder form, which is difficult to incorporate into protective clothing. As a result, a new area of research has developed to functionalize fabrics with MOFs to make a wearable multifunctional fabric that retains the desired properties of the MOF. In this work, UiO-66 was incorporated into poly(vinylidene) fluoride/Ti(OH)₄ composite fabric using electrospinning and evaluated for its use in chemical protective clothing. The base triethanolamine (TEA) was added to the composite fabric to create a self-buffering system that would allow for catalytic decontamination of CWAs without the need for a buffer solution. The fabrics were tested against the simulants methyl-paraoxon (dimethyl (4-nitrophenyl) phosphate, DMNP), diisopropyl fluorophosphate (DFP), and the nerve agent soman (GD). The results show that all of the samples have high moisture vapor transport and filtration efficiency, which are desirable for protective clothing. The incorporation of TEA decreased air permeation of the fabric, but increased the catalytic activity of the composite fabric against DMNP and DFP. Samples with and without TEA have rapid half-lives ( t_1/2) as short as 35 min against GD agent. These new catalytically active self-buffering multifunctional fabrics have great potential for application in chemical protective clothings.

Highly Specific Enrichment of Multi-phosphopeptides by the Diphosphorylated Fructose-Modified Dual-Metal-Centered Zirconium-Organic Framework

Multisite phosphorylation of a protein, generally occurring in biological processes, plays important roles in the regulation of cellular functions. However, the identification of multi-phosphopeptides especially at low abundance is a big challenge as the extreme hydrophilicity and poor ionization efficiency of the multiphosphorylated peptides restrict the deep inspection of multisite phosphorylation processes. In this study, the highly specific enrichment of multiphosphorylated peptides was achieved via the modification of the dual-metal-centered zirconium-organic framework with the diphosphorylated fructose. The diphosphorylated fructose-modified dual-metal-centered zirconium-organic framework (DZMOF-FDP) demonstrated the highly specific affinity to the multiple phosphorylated peptides, with the density functional theory calculations explaining the plausible mechanism for multi-phosphopeptides on the DZMOF-FDP. The selective capture of multi-phosphopeptides from mimic samples confirmed the superior performance of the DZMOF-FDP, with comprehensive comparisons to other modification agents, such as orthophosphate and pyrophosphate. A number of 1871 multiphosphorylated peptides captured by DZMOF-FDP from tryptic digests of HeLa cell lysate could be identified, significantly higher than that by the pristine DZMOF. The deliberately designed modification with diphosphorylated fructose for the dual-zirconium-centered metal-organic framework materials suggests an efficient strategy to develop new enrichment methods in the selective capture of target analytes by judiciously optimizing specific modifiers for adsorbents.

Polyoxometalate-Based Metal-Organic Frameworks with Conductive Polypyrrole for Supercapacitors

Metal-organic frameworks (MOFs) with high porosity could act as an ideal substitute for supercapacitors, but their poor electrical conductivities limit their electrochemical performances. In order to overcome this problem, conductive polypyrrole (PPy) has been introduced and a novel nanocomposite resulting from polyoxometalate (POM)-based MOFs (NENU-5) and PPy has been reported. It comprises the merits of POMs, MOFs, and PPy. Finally, the highly conductive PPy covering the surfaces of NENU-5 nanocrystallines can effectively improve the electron/ion transfer among NENU-5 nanocrystallines. The optimized NENU-5/PPy nanocomposite (the volume of Py is 0.15 mL) exhibits high specific capacitance (5147 mF·cm^-2), larger than that of pristine NENU-5 (432 mF·cm^-2). Furthermore, a symmetric supercapacitor device based on a NENU-5/PPy-0.15 nanocomposite possesses an excellent areal capacitance of 1879 mF·cm^-2, which is far above other MOF-based supercapacitors.

Metal-Organic Frameworks for Separation

Separation is an important industrial step with critical roles in the chemical, petrochemical, pharmaceutical, and nuclear industries, as well as in many other fields. Although much progress has been made, the development of better separation technologies, especially through the discovery of high-performance separation materials, continues to attract increasing interest due to concerns over factors such as efficiency, health and environmental impacts, and the cost of existing methods. Metal-organic frameworks (MOFs), a rapidly expanding family of crystalline porous materials, have shown great promise to address various separation challenges due to their well-defined pore size and unprecedented tunability in both composition and pore geometry. In the past decade, extensive research is performed on applications of MOF materials, including separation and capture of many gases and vapors, and liquid-phase separation involving both liquid mixtures and solutions. MOFs also bring new opportunities in enantioselective separation and are amenable to morphological control such as fabrication of membranes for enhanced separation outcomes. Here, some of the latest progress in the applications of MOFs for several key separation issues, with emphasis on newly synthesized MOF materials and the impact of their compositional and structural features on separation properties, are reviewed and highlighted.

Adsorption and Detection of Hazardous Trace Gases by Metal-Organic Frameworks

The quest for advanced designer adsorbents for air filtration and monitoring hazardous trace gases has recently been more and more driven by the need to ensure clean air in indoor, outdoor, and industrial environments. How to increase safety with regard to personal protection in the event of hazardous gas exposure is a critical question for an ever-growing population spending most of their lifetime indoors, but is also crucial for the chemical industry in order to protect future generations of employees from potential hazards. Metal-organic frameworks (MOFs) are already quite advanced and promising in terms of capacity and specific affinity to overcome limitations of current adsorbent materials for trace and toxic gas adsorption. Due to their advantageous features (e.g., high specific surface area, catalytic activity, tailorable pore sizes, structural diversity, and range of chemical and physical properties), MOFs offer a high potential as adsorbents for air filtration and monitoring of hazardous trace gases. Three advanced topics are considered here, in applying MOFs for selective adsorption: (i) toxic gas adsorption toward filtration for respiratory protection as well as indoor and cabin air, (ii) enrichment of hazardous gases using MOFs, and (iii) MOFs as sensors for toxic trace gases and explosives.

Cu(II)-Schiff base covalently anchored to MIL-125(Ti)-NH2 as heterogeneous catalyst for oxidation reactions

MIL-125(Ti)-NH₂ has been modified by reaction of salicylaldehyde with the terephthalate amino groups to form a salicylideneimine that act as ligand of Cu²⁺. The success of the postsynthetic modification was assessed by FTIR spectroscopy of the MIL-125(Ti)-NH₂-Sal-Cu and by analysis by ¹H NMR spectroscopy of the organic linkers upon dissolution of MIL-125(Ti)-NH₂-Sal-Cu. In comparison with parent MIL-125(Ti)-NH₂ and MIL-125(Ti)-NH₂-Sal, that exhibit a poor activity, the presence of the Cu-Schiff base complex in MIL-125(Ti)-NH₂-Sal-Cu catalyst for the oxidation of 1-phenylethanol by tert-butylhydroperoxyde (TBHP, 3 eq.) increases notably the catalytic activity. Hot filtration test and reusability experiments confirm that the process is heterogeneous and that MIL-125(Ti)-NH₂-Sal-Cu is stable under the reaction conditions. Quenching studies and EPR spectra using N-^tbutylphenylnitrone indicate the generation of ^tBuOO and ^tBuO under the reaction conditions. The scope of MIL-125(Ti)-NH₂-Sal-Cu as oxidation catalyst by ^tBuOOH was studied for benzyl alcohol as well as alicyclic and aliphatic alcohols and ethylbenzene.

Post-Synthetic Mannich Chemistry on Metal-Organic Frameworks: System-Specific Reactivity and Functionality-Triggered Dissolution

The Mannich reaction of the zirconium MOF [Zr6 O4 (OH)4 (bdc-NH2 )6 ] (UiO-66-NH2 , bdc-NH2 =2-amino-1,4-benzenedicarboxylate) with paraformaldehyde and pyrazole, imidazole or 2-mercaptoimidazole led to post-synthetic modification (PSM) through C-N bond formation. The reaction with imidazole (Him) goes to completion whereas those with pyrazole (Hpyz) and 2-mercaptoimidazole (HimSH) give up to 41 and 36 % conversion, respectively. The BET surface areas for the Mannich products are reduced from that of UiO-66-NH2 , but the compounds show enhanced selectivity for adsorption of CO2 over N2 at 273 K. The thiol-containing MOFs adsorb mercury(II) ions from aqueous solution, removing up to 99 %. The Mannich reaction with pyrazole succeeds on [Zn4 O(bdc-NH2 )3 ] (IRMOF-3), but a similar reaction on [Zn2 (bdc-NH2 )2 (dabco)] (dabco=1,4-diazabicyclo[2.2.2]octane) gave [Zn3 (bdc-NH2 )1.32 (bdc-NHCH2 pyz)1.68 (dabco)]⋅2 C7 H8 5, whereas the reaction with imidazole gave the expected PSM product. Compound 5 forms via a dissolution-recrystallisation process that is triggered by the "free" pyrazolate nitrogen atom competing with dabco for coordination to the zinc(II) centre. In contrast, the "free" nitrogen atom on the imidazolate is too far away to compete in this way. Mannich reactions on [In(OH)(bdc-NH2 )] (MIL-68(In)-NH2 ) stop after the first step, and the product was identified as [In(OH)(bdc-NH2 )0.41 (bdc-NHCH2 OCH3 )0.30 (bdc-N=CH2 )0.29 ], with addition of the heterocycle prevented by steric interactions.

Tetraarylpyrrolo[3,2-b]pyrroles as versatile and responsive fluorescent linkers in metal-organic frameworks

The first examples of crystalline coordination polymers containing the tetraarylpyrrolo[3,2-b]pyrrole (TPP) fluorophore are presented. We have prepared three new TPP ligands L1, H2L2 and H2L3, containing nitrile, carboxylate and mixed imidazole-carboxylate donor functionality, respectively. The ligands themselves each show significant fluorescence in the solution phase, with the nitrile species exhibiting solvatofluorochromism and the two carboxylate-containing compounds exhibiting concentration-dependent emission colour suggesting aggregation processes in solution. Three 3-dimensional polymeric structures are then presented. The compound poly-[AgL12]SbF6·3THF·2H2O 1 is an eightfold-interpenetrated diamondoid material, while poly-[Zn4O(L2)3]·20DMA·10H2O 2 is a porous Metal-Organic Framework with pcu topology, and both 1 and 2 show notable luminescence in the solid state. Complex 2 readily undergoes guest exchange accompanied by a reversible switching in emission colour with no change in chemical structure. While complex poly-[CdL3]·2.5DMA·3.5H2O 3 is non-emissive, it displays a twofold interpenetrated pts topology with hexagonal symmetry and an extremely long hexagonal pitch of 100.3 Å, and shows an impressive 22 wt% CO2 uptake capacity at 278 K and 1 bar.

A post-synthetic approach triggers selective and reversible sulphur dioxide adsorption on a metal-organic framework

We report the application of a post-synthetic solid-state cation-exchange process to afford a novel 3D MOF with hydrated barium cations hosted at pores able to trigger selective and reversible SO₂ adsorption. Computational modelling supports the full reversibility of the adsorption process on the basis of weak supramolecular interactions between SO₂ and coordinated water molecules.

Probing Metal-Organic Framework Design for Adsorptive Natural Gas Purification

Parent and amine-functionalized analogues of metal-organic frameworks (MOFs), UiO-66(Zr), MIL-125(Ti), and MIL-101(Cr), were evaluated for their hydrogen sulfide (H₂S) adsorption efficacy and post-exposure acid gas stability. Adsorption experiments were conducted through fixed-bed breakthrough studies utilizing multicomponent 1% H₂S/99% CH₄ and 1% H₂S/10% CO₂/89% CH₄ natural gas simulant mixtures. Instability of MIL-101(Cr) materials after H₂S exposure was discovered through powder X-ray diffraction and porosity measurements following adsorbent pelletization, whereas other materials retained their characteristic properties. Linker-based amine functionalities increased H₂S breakthrough times and saturation capacities from their parent MOF analogues. Competitive CO₂ adsorption effects were mitigated in mesoporous MIL-101(Cr) and MIL-101-NH₂(Cr), in comparison to microporous UiO-66(Zr) and MIL-125(Ti) frameworks. This result suggests that the installation of H₂S binding sites in large-pore MOFs could potentially enhance H₂S selectivity. In situ Fourier transform infrared measurements in 10% CO₂ and 5000 ppm H₂S environments suggest that framework hydroxyl and amine moieties serve as H₂S physisorption sites. Results from this study elucidate design strategies and stability considerations for engineering MOFs in sour gas purification applications.

PDMS-coated hypercrosslinked porous organic polymers modified via double postsynthetic acidifications for ammonia capture

Double postsynthetic acidifications of a hypercrosslinked polymer afforded record high NH₃ adsorption capacity per surface area. Its PDMS coating provided an 40-fold enhancement of low-pressure NH₃ adsorption capacity and hydrophobicity.

A hypercrosslinked porous organic polymer was modified by post-oxidation and post-sulfonation to obtain a porous platform with a high density of acidic groups. Such an acidified material exhibits record high NH₃ adsorption capacity per surface area, fast adsorption rate, and recyclability at low desorption temperature. Noticeably, the coating of the polymer with PDMS represents a facile and efficient route to enable both a significant improvement of low-pressure NH₃ adsorption capacity (∼40-fold enhancement; from 0.04 to 1.41 mmol g^–1) with respect to the non-modified polymer at 500 ppm and hydrophobicity associated with the selective sorption of NH₃ over water vapor (hydrophilic for the non-coated material). This material is easy to prepare, cost-effective, and scalable to mass production.

Determination of carbamazepine in urine and water samples using amino-functionalized metal-organic framework as sorbent

A stable and porous amino-functionalized zirconium-based metal organic framework (Zr-MOF-NH₂) containing missing linker defects was prepared and fully characterized by FTIR, scanning electron microscopy, powder X-ray diffraction, and BET surface area measurement. The Zr-MOF-NH₂ was then applied as an adsorbent in pipette-tip solid phase extraction (PT-SPE) of carbamazepine. Important parameters affecting extraction efficiency such as pH, sample volume, type and volume of eluent, amount of adsorbent, and number of aspirating/dispensing cycles for sample solution and eluent solvent were investigated and optimized. The best extraction efficiency was obtained when pH of 100 µL of sample solution was adjusted to 7.5 and 5 mg of the sorbent was used. Eluent solvent was 10 µL methanol. Linear dynamic range was found to be between 0.1 and 50 µg L⁻¹ and limit of detection for 10 measurement of blank solution was 0.05 µg L⁻¹. This extraction method was coupled to HPLC and was successfully employed for the determination of carbamazepine in urine and water samples. The strategy combined the advantages of fast and easy operation of PT-SPE with robustness and large adsorption capacity of Zr-MOF-NH₂.

Surface Pore Engineering of Covalent Organic Frameworks for Ammonia Capture through Synergistic Multivariate and Open Metal Site Approaches

Ammonia (NH₃) is a commonly used industrial gas, but its corrosiveness and toxicity are hazardous to human health. Although many adsorbents have been investigated for NH₃ sorption, limited ammonia uptake remains an urgent issue yet to be solved. In this article, a series of multivariate covalent organic frameworks (COFs) are explored which are densely functionalized with various active groups, such as -N-H, -C=O, and carboxyl group. Then, a metal ion (Ca²⁺, Mn²⁺, and Sr²⁺) is integrated into the carboxylated structure achieving the first case of an open metal site in COF architecture. X-ray photoelectron spectroscopy reveals conclusive evidence for the multiple binding interactions with ammonia in the modified COF materials. Infrared spectroscopy indicates a general trend of binding capability from weak to strong along with -N-H, -C=O, carboxyl group, and metal ion. Through the synergistic multivariate and open metal site, the COF materials show excellent adsorption capacities (14.3 and 19.8 mmol g^-1 at 298 and 283 K, respectively) and isosteric heat (Q_st) of 91.2 kJ mol^-1 for ammonia molecules. This novel approach enables the development of tailor-made porous materials with tunable pore-engineered surface for ammonia uptake.

Fast and Sustained Degradation of Chemical Warfare Agent Simulants Using Flexible Self-Supported Metal-Organic Framework Filters

Self-detoxification filters against lethal chemical warfare agents (CWAs) are highly desirable for the protection of human beings and the environment. In this report, flexible self-supported filters of a series of Zr(IV)-based metal-organic frameworks (MOFs) including UiO-66, UiO-67, and UiO-66-NH₂ were successfully prepared and exhibited fast and sustained degradation of CWA simulants. A half-life as short as 2.4 min was obtained for the catalytic hydrolysis of dimethyl 4-nitrophenyl phosphate, and the percent conversion remained above 90% over a long-term exposure of 120 min, well exceeding those of the previously reported composite MOF filters and the corresponding MOF powders. The outstanding detoxification performance of the self-supported fibrous filter comes from the exceptionally high surface area, excellent pore accessibility, and hierarchical structure from the nano- to macroscale. This work demonstrates, for the first time, MOF-only filters as efficient self-detoxification media, which will offer new opportunities for the design and fabrication of functional materials for toxic chemical protection.

Solvothermal Synthesis of MIL-96 and UiO-66-NH2 on Atomic Layer Deposited Metal Oxide Coatings on Fiber Mats

Metal-organic frameworks (MOFs), which contain reactive metal clusters and organic ligands allowing for large porosities and surface areas, have proven effective in gas adsorption, separations, and catalysis. MOFs are most commonly synthesized as bulk powder, requiring additional processes to adhere them to functional devices and fabrics that risk decreasing the powder porosity and adsorption capacity. Here, we demonstrate a method of first coating fabrics with metal oxide films using atomic layer deposition (ALD). This process creates conformal films of controllable thickness on each fiber, while providing a more reactive surface for MOF nucleation. By submerging the ALD coated fabric in solution during solvothermal MOF synthesis, the MOFs create a conformal, well-adhered coating on the fibers, resulting in a MOF-functionalized fabric, without additional adhesion materials that may block MOF pores and functional sites. Here we demonstrate two solvothermal synthesis methods. First, we form a MIL-96(Al) layer on polypropylene fibers using synthetic conditions that convert the metal oxide to MOF. Using initial inorganic films of varying thicknesses, diffusion of the organic linker into the inorganic allows us to control the extent of MOF loading on the fabric. Second, we perform a solvothermal synthesis of UiO-66-NH2 in which the MOF nucleates on the conformal metal oxide coating on polyamide-6 (PA-6) fibers, thereby producing a uniform and conformal thin film of MOF on the fabric. The resulting materials can be directly incorporated into filter devices or protective clothing and eliminate the maladroit qualities of loose powder.

Zr(IV)-Based Metal-Organic Framework with T-Shaped Ligand: Unique Structure, High Stability, Selective Detection, and Rapid Adsorption of Cr2O72- in Water

Dichromate is known for severe health impairments to organisms. New and valid strategies have been developed to rapidly detect and efficiently remove this pollutant. Constructing stable luminescent metal-organic frameworks (MOFs) for dichromate recognition and removal from aqueous solution could provide a feasible resolution to this problem. Herein, a new luminescent Zr(IV)-MOF, Zr₆O₄(OH)₇(H₂O)₃(BTBA)₃ (BUT-39, BUT = Beijing University of Technology) was constructed through the reaction of a newly designed functionalized T-shaped ligand 4,4',4″-(1 H-benzo[ d]imidazole-2,4,7-triyl)tribenzoic acid (H₃BTBA) with zirconium salt. BUT-39 has a unique porous framework structure, in which Zr₆ cluster acts as a rare low-symmetric 9-connected node and BTBA^3- as a T-shaped 3-connected linker. As far as we know, this represents the first case of a (3,9)-connected Zr(IV)-MOF. BUT-39 could retain its framework integrity in boiling water, 2 M HCl aqueous solution, and pH 12 NaOH aqueous solution. Due to its good water stability and strong fluorescent emission, BUT-39 is then employed in fluorescence sensing for various ions in aqueous solution and shows good performance toward Cr₂O₇^2- selectively, at a low concentration and a short response time (<1 min). Simultaneously, it also exhibits excellent capacity to rapidly capture Cr₂O₇^2- (within 1 min) with a high uptake up to 1 mmol g^-1. Taking advantage of its excellent stability, sensitive and selective sensing, as well as rapid and high adsorption, BUT-39 is expected to be useful in Cr₂O₇^2- detection in and removal from water.

Stable Metal-Organic Frameworks with Group 4 Metals: Current Status and Trends

Group 4 metal-based metal-organic frameworks (M^IV-MOFs), including Ti-, Zr-, and Hf-based MOFs, are one of the most attractive classes of MOF materials owing to their superior chemical stability and structural tunability. Despite being a relatively new field, M^IV-MOFs have attracted significant research attention in the past few years, leading to exciting advances in syntheses and applications. In this outlook, we start with a brief overview of the history and current status of M^IV-MOFs, emphasizing the challenges encountered in their syntheses. The unique properties of M^IV-MOFs are discussed, including their high chemical stability and strong tolerance toward defects. Particular emphasis is placed on defect engineering in Zr-MOFs which offers additional routes to tailor their functions. Photocatalysis of M^IV-MOF is introduced as a representative example of their emerging applications. Finally, we conclude with the perspective of new opportunities in synthesis and defect engineering.

Metal-organic framework-based materials: superior adsorbents for the capture of toxic and radioactive metal ions

Highly efficient removal of metal ion pollutants, such as toxic and nuclear waste-related metal ions, remains a serious task from the biological and environmental standpoint because of their harmful effects on human health and the environment. Recently, highly porous metal-organic frameworks (MOFs), with excellent chemical stability and abundant functional groups, have represented a new addition to the area of capturing various types of hazardous metal ion pollutants. This review focuses on recent progress in reported MOFs and MOF-based composites as superior adsorbents for the efficient removal of toxic and nuclear waste-related metal ions. Aspects related to the interaction mechanisms between metal ions and MOF-based materials are systematically summarized, including macroscopic batch experiments, microscopic spectroscopy analysis, and theoretical calculations. The adsorption properties of various MOF-based materials are assessed and compared with those of other widely used adsorbents. Finally, we propose our personal insights into future research opportunities and challenges in the hope of stimulating more researchers to engage in this new field of MOF-based materials for environmental pollution management.

Computer-aided discovery of a metal-organic framework with superior oxygen uptake

Current advances in materials science have resulted in the rapid emergence of thousands of functional adsorbent materials in recent years. This clearly creates multiple opportunities for their potential application, but it also creates the following challenge: how does one identify the most promising structures, among the thousands of possibilities, for a particular application? Here, we present a case of computer-aided material discovery, in which we complete the full cycle from computational screening of metal–organic framework materials for oxygen storage, to identification, synthesis and measurement of oxygen adsorption in the top-ranked structure. We introduce an interactive visualization concept to analyze over 1000 unique structure–property plots in five dimensions and delimit the relationships between structural properties and oxygen adsorption performance at different pressures for 2932 already-synthesized structures. We also report a world-record holding material for oxygen storage, UMCM-152, which delivers 22.5% more oxygen than the best known material to date, to the best of our knowledge.

The emergence of thousands of metal–organic frameworks (MOFs) has created the challenge of finding promising structures for particular applications. Here, the authors present a tool for computer-aided material discovery where a large number of MOFs are screened, with the top-ranked structure synthesized for oxygen storage applications.

The Hydrolytic Stability and Degradation Mechanism of a Hierarchically Porous Metal Alkylphosphonate Framework

To aid the design of a hierarchically porous unconventional metal-phosphonate framework (HP-UMPF) for practical radioanalytical separation, a systematic investigation of the hydrolytic stability of bulk phase against acidic corrosion has been carried out for an archetypical HP-UMPF. Bulk dissolution results suggest that aqueous acidity has a more paramount effect on incongruent leaching than the temperature, and the kinetic stability reaches equilibrium by way of an accumulation of a partial leached species on the corrosion conduits. A variation of particle morphology, hierarchical porosity and backbone composition upon corrosion reveals that they are hydrolytically resilient without suffering any great degradation of porous texture, although large aggregates crack into sporadic fractures while the nucleophilic attack of inorganic layers cause the leaching of tin and phosphorus. The remaining selectivity of these HP-UMPFs is dictated by a balance between the elimination of free phosphonate and the exposure of confined phosphonates, thus allowing a real-time tailor of radionuclide sequestration. Moreover, a plausible degradation mechanism has been proposed for the triple progressive dissolution of three-level hierarchical porous structures to elucidate resultant reactivity. These HP-UMPFs are compared with benchmark metal-organic frameworks (MOFs) to obtain a rough grading of hydrolytic stability and two feasible approaches are suggested for enhancing their hydrolytic stability that are intended for real-life separation protocols.

Metal-Organic Framework Modified Glass Substrate for Analysis of Highly Volatile Chemical Warfare Agents by Paper Spray Mass Spectrometry

Paper spray mass spectrometry has been shown to successfully analyze chemical warfare agent (CWA) simulants. However, due to the volatility differences between the simulants and real G-series (i.e., sarin, soman) CWAs, analysis from an untreated paper substrate proved difficult. To extend the analytical lifetime of these G-agents, metal-organic frameworks (MOFs) were successfully integrated onto the paper spray substrates to increase adsorption and desorption. In this study, several MOFs and nanoparticles were tested to extend the analytical lifetimes of sarin, soman, and cyclosarin on paper spray substrates. It was found that the addition of either UiO-66 or HKUST-1 to the paper substrate increased the analytical lifetime of the G-agents from less than 5 min detectability to at least 50 min.

Synthesis of a novel Au nanoparticles decorated Ni-MOF/Ni/NiO nanocomposite and electrocatalytic performance for the detection of glucose in human serum

A nonenzymatic glucose electrochemical sensor was constructed based on Au nanoparticles (AuNPs) decorated Ni metal-organic-framework (MOF)/Ni/NiO nanocomposite. Ni-MOF/Ni/NiO nanocomposite was synthesized by one-step calcination of Ni-MOF. Then AuNPs were loaded onto the Ni-based nanocomposites' surface through electrostatic adsorption. Through characterization by transmission electron microscopy (TEM), high resolution TEM (HRTEM) and energy disperse spectroscopy (EDS) mapping, it is found that the AuNPs were well distributed on the surface of Ni-based nanocomposite. Cyclic voltammetric (CV) study showed the electrocatalytic activity of Au-Ni nanocomposite was highly improved after loading AuNPs onto it. Amperometric study demonstrated that the Au-Ni nanocomposites modified glassy carbon electrode (GCE) exhibited a high sensitivity of 2133.5 mA M^-1 cm^-2 and a wide linear range (0.4-900 μM) toward the oxidation of glucose with a detection limit as low as 0.1 μM. Moreover, the reproducibility, selectivity and stability of the sensor all exhibited outstanding performance. We applied the as-fabricated high performance sensor to measure the glucose levels in human serum and obtained satisfactory results. It is believed that AuNPs decorated Ni MOF/Ni/NiO nanocomposite provides a new platform for developing highly performance electrochemical sensors in practical applications.

Anion-Controlled Architecture and Photochromism of Naphthalene Diimide-Based Coordination Polymers

Three new cadmium coordination polymers, namely [Cd(NO₃)₂(DPNDI)(CH₃OH)]·CH₃OH (1), [Cd(SCN)₂(DPNDI)] (2), and [Cd(DPNDI)₂(DMF)₂]·2ClO₄ (3) (DPNDI = N,N-di(4-pyridyl)-1,4,5,8-naphthalene diimide, DMF = N,N-dimethylformamide) have been synthesized by reactions of DPNDI with Cd(NO₃)₂, Cd(SCN)₂, and Cd(ClO₄)₂, respectively. Compound 1 is a one-dimensional coordination polymer with strong lone pair-π interactions between the coordinated NO₃⁻ anions and the imide ring of DPNDI; while 2 is a two-dimensional network with a (4, 4) net topology. In the case of 3, due to the presence of uncoordinated perchlorate counter ions, it exhibits a non-interpenetrated square-grid coordination polymer containing one-dimensional rhomboid channels. The structural diversity in these compounds is attributed to different coordination abilities and geometries of counter anions. Due to the presence of electron-deficient NDI moiety, the photochromic behavior of these compounds was studied. Interestingly, only compounds 1 and 3 exhibit color changes under light irradiation. The influence of the anions on the photochromism process of the NDI-based materials has been discussed.

Investigating the cheletropic reaction between sulfur dioxide and butadiene-containing linkers in UiO-66

UiO-66 and a muconic acid functionalized derivative of UiO-66 (UiO-66-MA) were synthesized via the solvothermal method to determine if the muconic acid could undergo a cheletropic reaction in the presence of sulfur dioxide inside the metal-organic framework (MOF). Both MOFs were exposed to a constant flow of sulfur dioxide, and UiO-66-MA was observed to take up three times more sulfur dioxide than unfunctionalized UiO-66. Despite the improved uptake of sulfur dioxide in UiO-66-MA, NMR and IR data indicate that no chemical change occurred to the muconic acid indicating that a cheletropic reaction did not occur. We thus propose that the increased adsorption is due to either an interaction between the sulfur dioxide and unbound carboxylic acid from the muconic acid or a favourable interaction between the butadiene of muconic acid and sulfur dioxide.

Diffusion Control in the in Situ Synthesis of Iconic Metal-Organic Frameworks within an Ionic Polymer Matrix

Ionic polymers that possess ion-exchangeable sites have been shown to be a greatly useful platform to fabricate mixed matrices (MMs) where metal-organic frameworks (MOFs) can be in situ synthesized, although the in situ synthesis of MOF has been rarely studied. In this study, alginate (ALG), an anionic green polymer that possesses metal-ion-exchangeable sites, is employed as a platform of MMs for the in situ synthesis of iconic MOFs, HKUST-1, and MOF-74(Zn). We demonstrate for the first time that the sequential order of supplying MOF ingredients (metal ion and deprotonated ligand) into the alginate matrix leads to substantially different results because of a difference in the diffusion of the MOF components. For the examples examined, whereas the infusion of BTC^3- ligand into Cu²⁺-exchanged ALG engendered the eggshell-shaped HKUST-1 layers on the surface of MM spheres, the infusion of Cu²⁺ ions into BTC^3--included alginate engendered the high dispersivity and junction contact of HKUST-1 crystals in the alginate matrix. This fundamental property has been exploited to fabricate a flexible MOF-containing mixed matrix membrane by coincorporating poly(vinyl alcohol). Using two molecular dyes, namely, methylene blue and rhodamine 6G, further, we show that this in situ strategy is suitable for fabricating an MOF-MM that exhibits size-selective molecular uptake.