A nomenclature for restriction enzymes, DNA methyltransferases, homing endonucleases and their genes

Recombinant expression, purification, and characterization of XorKII: a restriction endonuclease from Xanthomonas oryzae pv. oryzae

An endonuclease from Xanthomonas oryzae pathovar oryzae (Xoo) KACC10331, XorKII, was recombinantly produced in Escherichia coli by applying the stationary state induction method, which was necessary to prevent the unwanted lysis of E. coli cells. XorKII was purified by immobilized metal affinity chromatography on an FPLC system. The yield was 3.5mg of XorKII per liter of LB medium. The purified recombinant XorKII showed that it recognized and cleaved to the same site as PstI. It behaved as a dimer as evidenced by the size exclusion chromatography. The specific activity of the purified XorKII was determined to be 31,300 U/mg. The enzyme activity was monitored by cleaving lambda DNA or YEp24 plasmid as substrates. The enzyme was the most active at 10mM Tris-HCl pH 7.0, 10 mM MgCl(2), 1mM dithiothreitol at 37 degrees C. XorKII was easily inactivated by heating at 65 degrees C for 5 min, but retained most of the original activity after incubation at 37 degrees C for 24h.

DNA base flipping by both members of the PspGI restriction-modification system

The PspGI restriction–modification system recognizes the sequence CCWGG. R.PspGI cuts DNA before the first C in the cognate sequence and M.PspGI is thought to methylate N4 of one of the cytosines in the sequence. M.PspGI enhances fluorescence of 2-aminopurine in DNA if it replaces the second C in the sequence, while R.PspGI enhances fluorescence when the fluorophore replaces adenine in the central base pair. This strongly suggests that the methyltransferase flips the second C in the recognition sequence, while the endonuclease flips both bases in the central base pair out of the duplex. M.PspGI is the first N4-cytosine MTase for which biochemical evidence for base flipping has been presented. It is also the first type IIP methyltransferase whose catalytic activity is strongly stimulated by divalent metal ions. However, divalent metal ions are not required for its base-flipping activity. In contrast, these ions are required for both base flipping and catalysis by the endonuclease. The two enzymes have similar temperature profiles for base flipping and optimal flipping occurs at temperatures substantially below the growth temperature of the source organism for PspGI and for the catalytic activity of endonuclease. We discuss the implications of these results for DNA binding by these enzymes and their evolutionary origin.

EcoR124I: from plasmid-encoded restriction-modification system to nanodevice

SUMMARY

Plasmid R124 was first described in 1972 as being a new member of incompatibility group IncFIV, yet early physical investigations of plasmid DNA showed that this type of classification was more complex than first imagined. Throughout the history of the study of this plasmid, there have been many unexpected observations. Therefore, in this review, we describe the history of our understanding of this plasmid and the type I restriction-modification (R-M) system that it encodes, which will allow an opportunity to correct errors, or misunderstandings, that have arisen in the literature. We also describe the characterization of the R-M enzyme EcoR124I and describe the unusual properties of both type I R-M enzymes and EcoR124I in particular. As we approached the 21st century, we began to see the potential of the EcoR124I R-M enzyme as a useful molecular motor, and this leads to a description of recent work that has shown that the R-M enzyme can be used as a nanoactuator. Therefore, this is a history that takes us from a plasmid isolated from (presumably) an infected source to the potential use of the plasmid-encoded R-M enzyme in bionanotechnology.

Evolution of sequence specificity in a restriction endonuclease by a point mutation

Restriction endonucleases (REases) protect bacteria from invading foreign DNAs and are endowed with exquisite sequence specificity. REases have originated from the ancestral proteins and evolved new sequence specificities by genetic recombination, gene duplication, replication slippage, and transpositional events. They are also speculated to have evolved from nonspecific endonucleases, attaining a high degree of sequence specificity through point mutations. We describe here an example of generation of exquisitely site-specific REase from a highly-promiscuous one by a single point mutation.

Domain organization and functional analysis of type IIS restriction endonuclease Eco31I

Type IIS restriction endonuclease Eco31I harbors a single HNH active site and cleaves both DNA strands close to its recognition sequence, 5'-GGTCTC(1/5). A two-domain organization of Eco31I was determined by limited proteolysis. Analysis of proteolytic fragments revealed that the N-terminal domain of Eco31I is responsible for the specific DNA binding, while the C-terminal domain contains the HNH nuclease-like active site. Gel-shift and gel-filtration experiments revealed that a monomer of the N-terminal domain of Eco31I is able to bind a single copy of cognate DNA. However, in contrast to other studied type IIS enzymes, the isolated catalytic domain of Eco31I was inactive. Steady-state and transient kinetic analysis of Eco31I reactions was inconsistent with dimerization of Eco31I on DNA. Thus, we propose that Eco31I interacts with individual copies of its recognition sequence in its monomeric form and presumably remains a monomer as it cleaves both strands of double-stranded DNA. The domain organization and reaction mechanism established for Eco31I should be common for a group of evolutionary related type IIS restriction endonucleases Alw26I, BsaI, BsmAI, BsmBI and Esp3I that recognize DNA sequences bearing the common pentanucleotide 5'-GTCTC.

Quantitative fluorescence correlation spectroscopy reveals a 1000-fold increase in lifetime of protein functionality

We have investigated dilute protein solutions with fluorescence correlation spectroscopy (FCS) and have observed that a rapid loss of proteins occurs from solution. It is commonly assumed that such a loss is the result of protein adsorption to interfaces. A protocol was developed in which this mode of protein loss can be prevented. However, FCS on fluorescent protein (enhanced green fluorescent protein, mCherry, and mStrawberry) solutions enclosed by adsorption-protected interfaces still reveals a decrease of the fluorescent protein concentration, while the diffusion time is stable over long periods of time. We interpret this decay as a loss of protein functionality, probably caused by denaturation of the fluorescent proteins. We show that the typical lifetime of protein functionality in highly dilute, approximately single molecule per femtoliter solutions can be extended more than 1000-fold (typically from a few hours to >40 days) by adding compounds with surfactant behavior. No direct interactions between the surfactant and the fluorescent proteins were observed from the diffusion time measured by FCS. A critical surfactant concentration of more than 23 muM was required to achieve the desired protein stabilization for Triton X-100. The surfactant does not interfere with DNA-protein binding, because similar observations were made using DNA-cutting restriction enzymes. We associate the occurrence of denaturation of proteins with the activity of water at the water-protein interface, which was recently proposed in terms of the "water attack model". Our observations suggest that soluble biomolecules can extend an influence over much larger distances than suggested by their actual volume.

Quick identification of Type I restriction enzyme isoschizomers using newly developed pTypeI and reference plasmids

Although DNA-recognition sequences are among the most important characteristics of restriction enzymes and their corresponding methylases, determination of the recognition sequence of a Type-I restriction enzyme is a complicated procedure. To facilitate this process we have previously developed plasmid R-M tests and the computer program RM search. To specifically identify Type-I isoschizomers, we engineered a pUC19 derivative plasmid, pTypeI, which contains all of the 27 Type-I recognition sequences in a 248-bp DNA fragment. Furthermore, a series of 27 plasmids (designated ‘reference plasmids’), each containing a unique Type-I recognition sequence, were also constructed using pMECA, a derivative of pUC vectors. In this study, we tried those vectors on 108 clinical E. coli strains and found that 48 strains produced isoschizomers of Type I enzymes. A detailed study of 26 strains using these ‘reference plasmids’ revealed that they produce seven different isoschizomers of the prototypes: EcoAI, EcoBI, EcoKI, Eco377I, Eco646I, Eco777I and Eco826I. One strain EC1344 produces two Type I enzymes (EcoKI and Eco377I).

Structures of the rare-cutting restriction endonuclease NotI reveal a unique metal binding fold involved in DNA binding

The structure of the rare-cutting restriction endonuclease NotI, which recognizes the 8 bp target 5'-GCGGCCGC-3', has been solved with and without bound DNA. Because of its specificity (recognizing a site that occurs once per 65 kb), NotI is used to generate large genomic fragments and to map DNA methylation status. NotI contains a unique metal binding fold, found in a variety of putative endonucleases, occupied by an iron atom coordinated within a tetrahedral Cys4 motif. This domain positions nearby protein elements for DNA recognition, and serves a structural role. While recognition of the central six base pairs of the target is accomplished via a saturated hydrogen bond network typical of restriction enzymes, the most peripheral base pairs are engaged in a single direct contact in the major groove, reflecting reduced pressure to recognize those positions. NotI may represent an evolutionary intermediate between mobile endonucleases (which recognize longer target sites) and canonical restriction endonucleases.

The Orf18 gene product from conjugative transposon Tn916 is an ArdA antirestriction protein that inhibits type I DNA restriction-modification systems

Gene orf18, which is situated within the intercellular transposition region of the conjugative transposon Tn916 from the bacterial pathogen Enterococcus faecalis, encodes a putative ArdA (alleviation of restriction of DNA A) protein. Conjugative transposons are generally resistant to DNA restriction upon transfer to a new host. ArdA from Tn916 may be responsible for the apparent immunity of the transposon to DNA restriction and modification (R/M) systems and for ensuring that the transposon has a broad host range. The orf18 gene was engineered for overexpression in Escherichia coli, and the recombinant ArdA protein was purified to homogeneity. The protein appears to exist as a dimer at nanomolar concentrations but can form larger assemblies at micromolar concentrations. R/M assays revealed that ArdA can efficiently inhibit R/M by all four major classes of Type I R/M enzymes both in vivo and in vitro. These R/M systems are present in over 50% of sequenced prokaryotic genomes. Our results suggest that ArdA can overcome the restriction barrier following conjugation and so helps increase the spread of antibiotic resistance genes by horizontal gene transfer.

Template-directed addition of nucleosides to DNA by the BfiI restriction enzyme

Restriction endonucleases catalyse DNA cleavage at specific sites. The BfiI endonuclease cuts DNA to give staggered ends with 1-nt 3'-extensions. We show here that BfiI can also fill in the staggered ends: while cleaving DNA, it can add a 2'-deoxynucleoside to the reaction product to yield directly a blunt-ended DNA. We propose that nucleoside incorporation proceeds through a two-step reaction, in which BfiI first cleaves the DNA to make a covalent enzyme-DNA intermediate and then resolves it by a nucleophilic attack of the 3'-hydroxyl group of the incoming nucleoside, to yield a transesterification product. We demonstrate that base pairing of the incoming nucleoside with the protruding DNA end serves as a template for the incorporation and governs the yield of the elongated product. The efficiency of the template-directed process has been exploited by using BfiI for the site-specific modification of DNA 5'-termini with an amino group using a 5'-amino-5'-deoxythymidine.

The BsaHI restriction-modification system: cloning, sequencing and analysis of conserved motifs

Background

Restriction and modification enzymes typically recognise short DNA sequences of between two and eight bases in length. Understanding the mechanism of this recognition represents a significant challenge that we begin to address for the BsaHI restriction-modification system, which recognises the six base sequence GRCGYC.

Results

The DNA sequences of the genes for the BsaHI methyltransferase, bsaHIM, and restriction endonuclease, bsaHIR, have been determined (GenBank accession #EU386360), cloned and expressed in E. coli. Both the restriction endonuclease and methyltransferase enzymes share significant similarity with a group of 6 other enzymes comprising the restriction-modification systems HgiDI and HgiGI and the putative HindVP, NlaCORFDP, NpuORFC228P and SplZORFNP restriction-modification systems. A sequence alignment of these homologues shows that their amino acid sequences are largely conserved and highlights several motifs of interest. We target one such conserved motif, reading SPERRFD, at the C-terminal end of the bsaHIR gene. A mutational analysis of these amino acids indicates that the motif is crucial for enzymatic activity. Sequence alignment of the methyltransferase gene reveals a short motif within the target recognition domain that is conserved among enzymes recognising the same sequences. Thus, this motif may be used as a diagnostic tool to define the recognition sequences of the cytosine C5 methyltransferases.

Conclusion

We have cloned and sequenced the BsaHI restriction and modification enzymes. We have identified a region of the R. BsaHI enzyme that is crucial for its activity. Analysis of the amino acid sequence of the BsaHI methyltransferase enzyme led us to propose two new motifs that can be used in the diagnosis of the recognition sequence of the cytosine C5-methyltransferases.

Identification of GATC- and CCGG-recognizing Type II REases and their putative specificity-determining positions using Scan2S--a novel motif scan algorithm with optional secondary structure constraints

Restriction endonucleases (REases) are DNA-cleaving enzymes that have become indispensable tools in molecular biology. Type II REases are highly divergent in sequence despite their common structural core, function and, in some cases, common specificities towards DNA sequences. This makes it difficult to identify and classify them functionally based on sequence, and has hampered the efforts of specificity-engineering. Here, we define novel REase sequence motifs, which extend beyond the PD-(D/E)XK hallmark, and incorporate secondary structure information. The automated search using these motifs is carried out with a newly developed fast regular expression matching algorithm that accommodates long patterns with optional secondary structure constraints. Using this new tool, named Scan2S, motifs derived from REases with specificity towards GATC- and CGGG-containing DNA sequences successfully identify REases of the same specificity. Notably, some of these sequences are not identified by standard sequence detection tools. The new motifs highlight potential specificity-determining positions that do not fully overlap for the GATC- and the CCGG-recognizing REases and are candidates for specificity re-engineering.

Structural and evolutionary classification of Type II restriction enzymes based on theoretical and experimental analyses

For a very long time, Type II restriction enzymes (REases) have been a paradigm of ORFans: proteins with no detectable similarity to each other and to any other protein in the database, despite common cellular and biochemical function. Crystallographic analyses published until January 2008 provided high-resolution structures for only 28 of 1637 Type II REase sequences available in the Restriction Enzyme database (REBASE). Among these structures, all but two possess catalytic domains with the common PD-(D/E)XK nuclease fold. Two structures are unrelated to the others: R.BfiI exhibits the phospholipase D (PLD) fold, while R.PabI has a new fold termed 'half-pipe'. Thus far, bioinformatic studies supported by site-directed mutagenesis have extended the number of tentatively assigned REase folds to five (now including also GIY-YIG and HNH folds identified earlier in homing endonucleases) and provided structural predictions for dozens of REase sequences without experimentally solved structures. Here, we present a comprehensive study of all Type II REase sequences available in REBASE together with their homologs detectable in the nonredundant and environmental samples databases at the NCBI. We present the summary and critical evaluation of structural assignments and predictions reported earlier, new classification of all REase sequences into families, domain architecture analysis and new predictions of three-dimensional folds. Among 289 experimentally characterized (not putative) Type II REases, whose apparently full-length sequences are available in REBASE, we assign 199 (69%) to contain the PD-(D/E)XK domain. The HNH domain is the second most common, with 24 (8%) members. When putative REases are taken into account, the fraction of PD-(D/E)XK and HNH folds changes to 48% and 30%, respectively. Fifty-six characterized (and 521 predicted) REases remain unassigned to any of the five REase folds identified so far, and may exhibit new architectures. These enzymes are proposed as the most interesting targets for structure determination by high-resolution experimental methods. Our analysis provides the first comprehensive map of sequence-structure relationships among Type II REases and will help to focus the efforts of structural and functional genomics of this large and biotechnologically important class of enzymes.

The Fidelity Index provides a systematic quantitation of star activity of DNA restriction endonucleases

Restriction endonucleases are the basic tools of molecular biology. Many restriction endonucleases show relaxed sequence recognition, called star activity, as an inherent property under various digestion conditions including the optimal ones. To quantify this property we propose the concept of the Fidelity Index (FI), which is defined as the ratio of the maximum enzyme amount showing no star activity to the minimum amount needed for complete digestion at the cognate recognition site for any particular restriction endonuclease. Fidelity indices for a large number of restriction endonucleases are reported here. The effects of reaction vessel, reaction volume, incubation mode, substrate differences, reaction time, reaction temperature and additional glycerol, DMSO, ethanol and Mn(2+) on the FI are also investigated. The FI provides a practical guideline for the use of restriction endonucleases and defines a fundamental property by which restriction endonucleases can be characterized.

Complete genome sequence of the soil actinomycete Kocuria rhizophila

The soil actinomycete Kocuria rhizophila belongs to the suborder Micrococcineae, a divergent bacterial group for which only a limited amount of genomic information is currently available. K. rhizophila is also important in industrial applications; e.g., it is commonly used as a standard quality control strain for antimicrobial susceptibility testing. Sequencing and annotation of the genome of K. rhizophila DC2201 (NBRC 103217) revealed a single circular chromosome (2,697,540 bp; G+C content of 71.16%) containing 2,357 predicted protein-coding genes. Most of the predicted proteins (87.7%) were orthologous to actinobacterial proteins, and the genome showed fairly good conservation of synteny with taxonomically related actinobacterial genomes. On the other hand, the genome seems to encode much smaller numbers of proteins necessary for secondary metabolism (one each of nonribosomal peptide synthetase and type III polyketide synthase), transcriptional regulation, and lateral gene transfer, reflecting the small genome size. The presence of probable metabolic pathways for the transformation of phenolic compounds generated from the decomposition of plant materials, and the presence of a large number of genes associated with membrane transport, particularly amino acid transporters and drug efflux pumps, may contribute to the organism's utilization of root exudates, as well as the tolerance to various organic compounds.

The recognition domain of the BpuJI restriction endonuclease in complex with cognate DNA at 1.3-A resolution

Type IIS restriction endonucleases recognize asymmetric DNA sequences and cleave both DNA strands at fixed positions downstream of the recognition site. The restriction endonuclease BpuJI recognizes the asymmetric sequence 5'-CCCGT; however, it cuts at multiple sites in the vicinity of the target sequence. BpuJI consists of two physically separate domains, with catalytic and dimerization functions in the C-terminal domain and DNA recognition functions in the N-terminal domain. Here we report the crystal structure of the BpuJI recognition domain bound to cognate DNA at 1.3-A resolution. This region folds into two winged-helix subdomains, D1 and D2, interspaced by the DL subdomain. The D1 and D2 subdomains of BpuJI share structural similarity with the similar subdomains of the FokI DNA-binding domain; however, their orientations in protein-DNA complexes are different. Recognition of the 5'-CCCGT target sequence is achieved by BpuJI through the major groove contacts of amino acid residues located on both the helix-turn-helix motifs and the N-terminal arm. The role of these interactions in DNA recognition is also corroborated by mutational analysis.

Real-time kinetics of restriction-modification gene expression after entry into a new host cell

Most type II restriction-modification (R-M) systems produce separate restriction endonuclease (REase) and methyltransferase (MTase) proteins. After R-M system genes enter a new cell, protective MTase must appear before REase to avoid host chromosome cleavage. The basis for this apparent temporal regulation is not well understood. PvuII and some other R-M systems appear to achieve this delay by cotranscribing the REase gene with the gene for an autogenous transcription activator/repressor (the 'C' protein C.PvuII). To test this model, bacteriophage M13 was used to introduce the PvuII genes into a bacterial population in a relatively synchronous manner. REase mRNA and activity appeared approximately 10 min after those of the MTase, but never rose if there was an inactivating pvuIIC mutation. Infection with recombinant M13pvuII phage had little effect on cell growth, relative to infection with parental M13. However, infection of cells pre-expressing C.PvuII led to cessation of growth. This study presents the first direct demonstration of delayed REase expression, relative to MTase, when type II R-M genes enter a new host cell. Surprisingly, though the C and REase genes are cotranscribed, the pvuIIC portion of the mRNA was more abundant than the pvuIIR portion after stable establishment of the R-M system.

Binding of MmeI restriction-modification enzyme to its specific recognition sequence is stimulated by S-adenosyl-L-methionine

Restriction endonucleases serve as a very good model for studying specific protein-DNA interaction. MmeI is a very interesting restriction endonuclease, but although it is useful in Serial Analysis of Gene Expression, still very little is known about the mechanism of its interaction with DNA. MmeI is a unique enzyme as besides cleaving DNA it also methylates specific sequence. For endonucleolytic activity MmeI requires Mg(II) and S-adenosyl-l-methionine (AdoMet). AdoMet is a methyl donor in the methylation reaction, but its requirement for DNA cleavage remains unclear. In the present article we investigated MmeI interaction with DNA with the use of numerous methods. Our electrophoretic mobility shift assay revealed formation of two types of specific protein-DNA complexes. We speculate that faster migrating complex consists of one protein molecule and one DNA fragment whereas, slower migrating complex, which appears in the presence of AdoMet, may be a dimer or multimer form of MmeI interacting with specific DNA. Additionally, using spectrophotometric measurements we showed that in the presence of AdoMet, MmeI protein undergoes conformational changes. We think that such change in the enzyme structure, upon addition of AdoMet, may enhance its specific binding to DNA. In the absence of AdoMet MmeI binds DNA to the much lower extent.

HsdR subunit of the type I restriction-modification enzyme EcoR124I: biophysical characterisation and structural modelling

Type I restriction-modification (RM) systems are large, multifunctional enzymes composed of three different subunits. HsdS and HsdM form a complex in which HsdS recognizes the target DNA sequence, and HsdM carries out methylation of adenosine residues. The HsdR subunit, when associated with the HsdS-HsdM complex, translocates DNA in an ATP-dependent process and cleaves unmethylated DNA at a distance of several thousand base-pairs from the recognition site. The molecular mechanism by which these enzymes translocate the DNA is not fully understood, in part because of the absence of crystal structures. To date, crystal structures have been determined for the individual HsdS and HsdM subunits and models have been built for the HsdM-HsdS complex with the DNA. However, no structure is available for the HsdR subunit. In this work, the gene coding for the HsdR subunit of EcoR124I was re-sequenced, which showed that there was an error in the published sequence. This changed the position of the stop codon and altered the last 17 amino acid residues of the protein sequence. An improved purification procedure was developed to enable HsdR to be purified efficiently for biophysical and structural analysis. Analytical ultracentrifugation shows that HsdR is monomeric in solution, and the frictional ratio of 1.21 indicates that the subunit is globular and fairly compact. Small angle neutron-scattering of the HsdR subunit indicates a radius of gyration of 3.4 nm and a maximum dimension of 10 nm. We constructed a model of the HsdR using protein fold-recognition and homology modelling to model individual domains, and small-angle neutron scattering data as restraints to combine them into a single molecule. The model reveals an ellipsoidal shape of the enzymatic core comprising the N-terminal and central domains, and suggests conformational heterogeneity of the C-terminal region implicated in binding of HsdR to the HsdS-HsdM complex.

Substrate specificity of new methyl-directed DNA endonuclease GlaI

Background

Recently, we have discovered site-specific endonucleases, which recognize and cleave only DNA sequences with 5-methylcytosine. Two specificities of such endonucleases have been described. Enzymes BisI, BlsI, and GluI are isoschizomers and hydrolyze the DNA sequence 5'-GCNGC-3'/3'-CGNCG-5', which is methylated in different ways. The enzyme GlaI cleaves the DNA sequence 5'-GCGC-3'/3'-CGCG-5' if there are two, three or four 5-methylcytosines. The goal of the present work is to study in detail the composition of recognition sequence and effect of the methylated cytosines on the efficiency of DNA cleavage by the methyl-directed DNA endonuclease GlaI

Results

In a recent work we have studied the dependence of GlaI activity on the quantity and location of 5-methylcytosines in the enzyme recognition sequence 5'-GCGC-3'/3'-CGCG-5'. A significant DNA cleavage has been observed for oligonucleotide duplexes, which include either three or four 5-methylcytosines. In this work we have studied dependence of the GlaI activity on quantity and location of methylated cytosines, as well as on composition of the recognition sequence.

Conclusion

The list of good substrates for GlaI includes a fully methylated site 5'-CGCG-3'/3'-GCGC-5', sites with three cytosines of a general structure 5'-PuMGM-3'/3'-PyGMG-5', and one recognition sequence with two methylated cytosines 5'-AMGT-3'/3'-TGMA-5', where M is 5-methylcytosine.

GlaI intermediate substrates include sites with three methylated cytosines of a general structure 5'-GMPuM-3'/3'-MGPyG-5', as well as a site with two methylcytosines 5'-GMGT-3'/3'-CGMA-5'.

The site 5'-GMGC-3'/3'-CGMG-5' may be considered a low activity substrate.

A model of restriction endonuclease MvaI in complex with DNA: a template for interpretation of experimental data and a guide for specificity engineering

R.MvaI is a Type II restriction enzyme (REase), which specifically recognizes the pentanucleotide DNA sequence 5'-CCWGG-3' (W indicates A or T). It belongs to a family of enzymes, which recognize related sequences, including 5'-CCSGG-3' (S indicates G or C) in the case of R.BcnI, or 5'-CCNGG-3' (where N indicates any nucleoside) in the case of R.ScrFI. REases from this family hydrolyze the phosphodiester bond in the DNA between the 2nd and 3rd base in both strands, thereby generating a double strand break with 5'-protruding single nucleotides. So far, no crystal structures of REases with similar cleavage patterns have been solved. Characterization of sequence-structure-function relationships in this family would facilitate understanding of evolution of sequence specificity among REases and could aid in engineering of enzymes with new specificities. However, sequences of R.MvaI or its homologs show no significant similarity to any proteins with known structures, thus precluding straightforward comparative modeling. We used a fold recognition approach to identify a remote relationship between R.MvaI and the structure of DNA repair enzyme MutH, which belongs to the PD-(D/E)XK superfamily together with many other REases. We constructed a homology model of R.MvaI and used it to predict functionally important amino acid residues and the mode of interaction with the DNA. In particular, we predict that only one active site of R.MvaI interacts with the DNA target at a time, and the cleavage of both strands (5'-CCAGG-3' and 5'-CCTGG-3') is achieved by two independent catalytic events. The model is in good agreement with the available experimental data and will serve as a template for further analyses of R.MvaI, R.BcnI, R.ScrFI and other related enzymes.

A new algorithm for cluster analysis of genomic methylation: the Helicobacter pylori case

MOTIVATION

The genomic methylation analysis is useful to type bacteria that have a high number of expressed type II methyltransferases. Methyltransferases are usually committed to Restriction and Modification (R-M) systems, in which the restriction endonuclease imposes high pressure on the expression of the cognate methyltransferase that hinder R-M system loss. Conventional cluster methods do not reflect this tendency. An algorithm was developed for dendrogram construction reflecting the propensity for conservation of R-M Type II systems.

RESULTS

The new algorithm was applied to 52 Helicobacter pylori strains from different geographical regions and compared with conventional clustering methods. The algorithm works by first grouping strains that share a common minimum set of R-M systems and gradually adds strains according to the number of the R-M systems acquired. Dendrograms revealed a cluster of African strains, which suggest that R-M systems are present in H.pylori genome since its human host migrates from Africa.

AVAILABILITY

The software files are available at http://www.ff.ul.pt/paginas/jvitor/Bioinformatics/MCRM_algorithm.zip.

Unconventional GIY-YIG homing endonuclease encoded in group I introns in closely related strains of the Bacillus cereus group

Several group I introns have been previously found in strains of the Bacillus cereus group at three different insertion sites in the nrdE gene of the essential nrdIEF operon coding for ribonucleotide reductase. Here, we identify an uncharacterized group IA intron in the nrdF gene in 12 strains of the B. cereus group and show that the pre-mRNA is efficiently spliced. The Bacillus thuringiensis ssp. pakistani nrdF intron encodes a homing endonuclease, denoted I-BthII, with an unconventional GIY-(X)₈-YIG motif that cleaves an intronless nrdF gene 7 nt upstream of the intron insertion site, producing 2-nt 3′ extensions. We also found four additional occurrences of two of the previously reported group I introns in the nrdE gene of 25 sequenced B. thuringiensis and one B. cereus strains, and one non-annotated group I intron at a fourth nrdE insertion site in the B. thuringiensis ssp. Al Hakam sequenced genome. Two strains contain introns in both the nrdE and the nrdF genes. Phylogenetic studies of the nrdIEF operon from 39 strains of the B. cereus group suggest several events of horizontal gene transfer for two of the introns found in this operon.

Regulatory circuit based on autogenous activation-repression: roles of C-boxes and spacer sequences in control of the PvuII restriction-modification system

Type II restriction-modification (R-M) systems comprise a restriction endonuclease (REase) and a protective methyltransferase (MTase). After R-M genes enter a new cell, MTase must appear before REase or the chromosome will be cleaved. PvuII and some other R-M systems achieve this delay by cotranscribing the REase gene with the gene for an autogenous transcription activator (the controlling or 'C' protein C.PvuII). This study reveals, through in vivo titration, that C.PvuII is not only an activator but also a repressor for its own gene. In other systems, this type of circuit can result in oscillatory behavior. Despite the use of identical, symmetrical C protein-binding sequences (C-boxes) in the left and right operators, C.PvuII showed higher in vitro affinity for O(L) than for O(R), implicating the spacer sequences in this difference. Mutational analysis associated the repression with O(R), which overlaps the promoter -35 hexamer but is otherwise dispensable for activation. A nonrepressing mutant exhibited poor establishment in new cells. Comparing promoter-operator regions from PvuII and 29 R-M systems controlled by C proteins revealed that the most-highly conserved sequence is the tetranucleotide spacer separating O(L) from O(R). Any changes in that spacer reduced the stability of C.PvuII-operator complexes and abolished activation.

Binding of MmeI restriction-modification enzyme to its specific recognition sequence is stimulated by S-adenosyl-L-methionine

Restriction endonucleases serve as a very good model for studying specific protein-DNA interaction. MmeI is a very interesting restriction endonuclease, but although it is useful in Serial Analysis of Gene Expression, still very little is known about the mechanism of its interaction with DNA. MmeI is a unique enzyme as besides cleaving DNA it also methylates specific sequence. For endonucleolytic activity MmeI requires Mg(II) and S-adenosyl-l-methionine (AdoMet). AdoMet is a methyl donor in the methylation reaction, but its requirement for DNA cleavage remains unclear. In the present article we investigated MmeI interaction with DNA with the use of numerous methods. Our electrophoretic mobility shift assay revealed formation of two types of specific protein-DNA complexes. We speculate that faster migrating complex consists of one protein molecule and one DNA fragment whereas, slower migrating complex, which appears in the presence of AdoMet, may be a dimer or multimer form of MmeI interacting with specific DNA. Additionally, using spectrophotometric measurements we showed that in the presence of AdoMet, MmeI protein undergoes conformational changes. We think that such change in the enzyme structure, upon addition of AdoMet, may enhance its specific binding to DNA. In the absence of AdoMet MmeI binds DNA to the much lower extent.

The restriction endonuclease R.NmeDI from Neisseria meningitidis that recognizes a palindromic sequence and cuts the DNA on both sides of the recognition sequence

The restriction endonuclease Type II R.NmeDI from Neisseria meningitidis 2120 (serogroup C, ST-11 complex) was characterized. The cloned nmeDIR gene was expressed in Escherichia coli cells, and the endonucleolytic and restriction activities of R.NmeDI were then observed in vitro and in vivo. The nmeDIR gene consists of 1056 bp coding 351 aa protein with a calculated molecular weight of M_(r) = 39 000 ± 1000 Da. The R.NmeDI enzyme was purified to apparent homogeneity following overexpression, using metal affinity chromatography. This enzyme recognizes a palindrome sequence and cleaves double-stranded DNA upstream and downstream of its recognition sequence (12/7) RCCGGY (7/12) (R = A/G, Y = C/T) cutting out a 25-bp fragment. R.NmeDI cleaves in two steps. The enzyme cleaves the first strand randomly on either side of the recognition sequence generating an intermediate, and the second cleavage occurs more slowly and results in the production of a final reaction product. The R.NmeDI endonuclease requires two recognition sequences for effective cleavage. The tetramer is an active form of the R.NmeDI enzyme.

Demonstration of REBASE-assisted restriction mapping to determine the recognition site of unknown restriction endonucleases

An important step in the characterization of a new restriction enzyme involves determination of its recognition site. Comparison of its DNA substrate digestion fragment patterns with those obtained using enzymes of known specificity indicates whether the enzyme recognizes a novel sequence or is an isoschizomer of already existing prototype. REBASE (Restriction Enzyme dataBASE: http://www.neb.com/rebase)-assisted restriction mapping is described in this paper for a rare cutter [TspMI (REBASE No. 7191)] and a frequent cutter [BflI (REBASE No. 4910)] as a practical exercise for undergraduate students to understand how to determine recognition sequence of a REase.

Isolation, purification and properties of new restriction endonucleases from Bacillus badius and Bacillus lentus

We tentatively named two enzymes as BbaI and BleI, which were isolated and purified from Gram-positive mesophilic bacteria Bacillus badius 1458 and Bacillus lentus 1689 respectively, by ammonium sulphate precipitation, phosphocellulose and heparin-sepharose column chromatography. SDS-PAGE protein profiles for BbaI and BleI showed denatured molecular weights of 52 and 48 kDa, respectively. BbaI hydrolyzed pUC18 DNA into 1900 and 700 bp, pBR322 DNA into two fragments of 2800 and 1500 bp and Phix174 DNA into 3800 and 1600 bp. BleI hydrolyzed pUC18 DNA into 1800 and 800 bp, pBR322 DNA into two fragments of 2700 and 1600 bp and Phix174 DNA into 3700 and 1700 bp. The effects of temperature, ionic strength, pH and Mg2+ ion concentrations were studied to demonstrate some biochemical properties of BbaI and BleI. Maximum activities of these enzymes were observed at 37 degrees C (pH 8.0) with 100 mM NaCl and 10 mM Mg2+ concentrations.

Hypervariation and phase variation in the bacteriophage 'resistome'

Most bacteria encode proteins for defence against infection by bacteriophages. The mechanisms that bring about phage defence are extremely diverse, suggesting frequent independent evolution of novel processes. Phage defence determinants are often plasmid or phage-encoded and many that are chromosomal show evidence of lateral transfer. Recent studies on restriction-modification (R-M) systems show that these genes are amongst the most rapidly evolving. Some bacteria have contingency genes that encode alternative target specificity determinants for Type I or Type III R-M systems, thus expanding the range of phages against which the host population is immune. The most counter-intuitive observation, however, is the prevalence of phase variation in many restriction systems, but recent arguments suggest that switching off expression of R-M systems can aid phage defence.

A switch in the mechanism of communication between the two DNA-binding sites in the SfiI restriction endonuclease

While many Type II restriction enzymes are dimers with a single DNA-binding cleft between the subunits, SfiI is a tetramer of identical subunits. Two of its subunits (a dimeric unit) create one DNA-binding cleft, and the other two create a second cleft on the opposite side of the protein. The two clefts bind specific DNA cooperatively to give a complex of SfiI with two recognition sites. This complex is responsible for essentially all of the DNA-cleavage reactions by SfiI: virtually none is due to the complex with one site. The communication between the DNA-binding clefts was examined by disrupting one of the very few polar interactions in the otherwise hydrophobic interface between the dimeric units: a tyrosine hydroxyl was removed by mutation to phenylalanine. The mutant protein remained tetrameric in solution and could bind two DNA sites. But instead of being activated by binding two sites, like wild-type SfiI, it showed maximal activity when bound to a single site and had a lower activity when bound to two sites. This interaction across the dimer interface thus enforces in wild-type SfiI a cooperative transition between inactive and active states in both dimers, but without this interaction as in the mutant protein, a single dimer can undergo the transition to give a stable intermediate with one inactive dimer and one active dimer.

Haemophilus influenzae phasevarions have evolved from type III DNA restriction systems into epigenetic regulators of gene expression

Phase variably expressed (randomly switching) methyltransferases associated with type III restriction-modification (R-M) systems have been identified in a variety of pathogenic bacteria. We have previously shown that a phase variable methyltransferase (Mod) associated with a type III R-M system in Haemophilus influenzae strain Rd coordinates the random switching of expression of multiple genes, and constitutes a phase variable regulon—‘phasevarion’. We have now identified the recognition site for the Mod methyltransferase in H. influenzae strain Rd as 5′-CGAAT-3′. This is the same recognition site as the previously described HinfIII system. A survey of 59 H. influenzae strains indicated significant sequence heterogeneity in the central, variable region of the mod gene associated with target site recognition. Intra- and inter-strain transformation experiments using Mod methylated or non-methylated plasmids, and a methylation site assay demonstrated that the sequence heterogeneity seen in the region encoding target site specificity does correlate to distinct target sites. Mutations were identified within the res gene in several strains surveyed indicating that Res is not functional. These data suggest that evolution of this type III R-M system into an epigenetic mechanism for controlling gene expression has, in some strains, resulted in loss of the DNA restriction function.

Genomic methylation: a tool for typing Helicobacter pylori isolates

The genome sequences of three Helicobacter pylori strains revealed an abundant number of putative restriction and modification (R-M) systems within a small genome (1.60 to 1.67 Mb). Each R-M system includes an endonuclease that cleaves a specific DNA sequence and a DNA methyltransferase that methylates either adenosine or cytosine within the same DNA sequence. These are believed to be a defense mechanism, protecting bacteria from foreign DNA. They have been classified as selfish genetic elements; in some instances it has been shown that they are not easily lost from their host cell. Possibly because of this phenomenon, the H. pylori genome is very rich in R-M systems, with considerable variation in potential recognition sequences. For this reason the protective aspect of the methyltransferase gene has been proposed as a tool for typing H. pylori isolates. We studied the expression of H. pylori methyltransferases by digesting the genomic DNAs of 50 strains with 31 restriction endonucleases. We conclude that methyltransferase diversity is sufficiently high to enable the use of the genomic methylation status as a typing tool. The stability of methyltransferase expression was assessed by comparing the methylation status of genomic DNAs from strains that were isolated either from the same patient at different times or from different stomach locations (antrum and corpus). We found a group of five methyltransferases common to all tested strains. These five may be characteristic of the genetic pool analyzed, and their biological role may be important in the host/bacterium interaction.

Generation of DNA cleavage specificities of type II restriction endonucleases by reassortment of target recognition domains

Type II restriction endonucleases (REases) cleave double-stranded DNA at specific sites within or close to their recognition sequences. Shortly after their discovery in 1970, REases have become one of the primary tools in molecular biology. However, the list of available specificities of type II REases is relatively short despite the extensive search for them in natural sources and multiple attempts to artificially change their specificity. In this study, we examined the possibility of generating cleavage specificities of REases by swapping putative target recognition domains (TRDs) between the type IIB enzymes AloI, PpiI, and TstI. Our results demonstrate that individual TRDs recognize distinct parts of the bipartite DNA targets of these enzymes and are interchangeable. Based on these properties, we engineered a functional type IIB REase having previously undescribed DNA specificity. Our study suggests that the TRD-swapping approach may be used as a general technique for the generation of type II enzymes with predetermined specificities.

A functional homing endonuclease in the Bacillus anthracis nrdE group I intron

The essential Bacillus anthracis nrdE gene carries a self-splicing group I intron with a putative homing endonuclease belonging to the GIY-YIG family. Here, we show that the nrdE pre-mRNA is spliced and that the homing endonuclease cleaves an intronless nrdE gene 5 nucleotides (nt) upstream of the intron insertion site, producing 2-nt 3' extensions. We also show that the sequence required for efficient cleavage spans at least 4 bp upstream and 31 bp downstream of the cleaved coding strand. The position of the recognition sequence in relation to the cleavage position is as expected for a GIY-YIG homing endonuclease. Interestingly, nrdE genes from several other Bacillaceae were also susceptible to cleavage, with those of Bacillus cereus, Staphylococcus epidermidis (nrdE1), B. anthracis, and Bacillus thuringiensis serovar konkukian being better substrates than those of Bacillus subtilis, Bacillus lichenformis, and S. epidermidis (nrdE2). On the other hand, nrdE genes from Lactococcus lactis, Escherichia coli, Salmonella enterica serovar Typhimurium, and Corynebacterium ammoniagenes were not cleaved. Intervening sequences (IVSs) residing in protein-coding genes are often found in enzymes involved in DNA metabolism, and the ribonucleotide reductase nrdE gene is a frequent target for self-splicing IVSs. A comparison of nrdE genes from seven gram-positive low-G+C bacteria, two bacteriophages, and Nocardia farcinica showed five different insertion sites for self-splicing IVSs within the coding region of the nrdE gene.

Identification of a single HNH active site in type IIS restriction endonuclease Eco31I

Type IIS restriction endonuclease Eco31I is a "short-distance cutter", which cleaves DNA strands close to its recognition sequence, 5'-GGTCTC(1/5). Previously, it has been proposed that related endonucleases recognizing a common sequence core GTCTC possess two active sites for cleavage of both strands in the DNA substrate. Here, we present bioinformatic identification and experimental evidence for a single nuclease active site. We identified a short region of homology between Eco31I and HNH nucleases, constructed a three-dimensional model of the putative catalytic domain and validated our predictions by random and site-specific mutagenesis. The restriction mechanism of Eco31I is suggested by analogy to the mechanisms of phage T4 endonuclease VII and homing endonuclease I-PpoI. We propose that residues D311 and N334 coordinate the cofactor. H312 acts as a general base-activating water molecule for the nucleophilic attack. K337 together with R340 and D345 are located in close proximity to the active center and are essential for correct folding of catalytic motif, while D345 together with R264 and D273 could be directly involved in DNA binding. We also predict that the Eco31I catalytic domain contains a putative Zn-binding site, which is essential for its structural integrity. Our results suggest that the HNH-like active site is involved in the cleavage of both strands in the DNA substrate. On the other hand, analysis of site-specific mutants in the region, previously suggested to harbor the second active site, revealed its irrelevance to the nuclease activity. Thus, our data argue against the earlier prediction and indicate the presence of a single conserved active site in type IIS restriction endonucleases that recognize common sequence core GTCTC.

A novel restriction-modification system from Xanthomonas campestris pv. vesicatoria encodes a m4C-methyltransferase and a nonfunctional restriction endonuclease

A novel restriction-modification (R-M) system, designated as xveIIRM, from chromosomal DNA of the Xanthomonas campestris pv. vesicatoria strain 7-1 (Xcv7-1) was cloned and characterized. The xveIIRM genes involved in this R-M system are aligned in a tail-to-tail orientation and overlapped by 12 base pairs. XveII methyltransferase gene could encode a 299-amino acid protein (M.XveII) with an estimated mass of 33.7 kDa and was classified to be a member of beta-class of m4C-MTase. M.XveII methylates the second cytosine of the 5'-CCCGGG-3' recognition sequence. The predicted amino acid sequence of the intact XveII endonuclease shared 41.9% identity with SmaI. However, a premature TAA translation termination codon was found in the open reading frame of xveIIR and expected to encode an 18.3 kDa truncated protein. The sequence data are consistent with observation of this study that no SmaI-like restriction activity could be detected in the cell extract of Xcv7-1.

Restriction endonuclease BpuJI specific for the 5'-CCCGT sequence is related to the archaeal Holliday junction resolvase family

Type IIS restriction endonucleases (REases) recognize asymmetric DNA sequences and cleave both DNA strands at fixed positions downstream of the recognition site. REase BpuJI recognizes the asymmetric sequence 5′-CCCGT, however it cuts at multiple sites in the vicinity of the target sequence. We show that BpuJI is a dimer, which has two DNA binding surfaces and displays optimal catalytic activity when bound to two recognition sites. BpuJI is cleaved by chymotrypsin into an N-terminal domain (NTD), which lacks catalytic activity but binds specifically to the recognition sequence as a monomer, and a C-terminal domain (CTD), which forms a dimer with non-specific nuclease activity. Fold recognition approach reveals that the CTD of BpuJI is structurally related to archaeal Holliday junction resolvases (AHJR). We demonstrate that the isolated catalytic CTD of BpuJI possesses end-directed nuclease activity and preferentially cuts 3 nt from the 3′-terminus of blunt-ended DNA. The nuclease activity of the CTD is repressed in the apo-enzyme and becomes activated upon specific DNA binding by the NTDs. This leads to a complicated pattern of specific DNA cleavage in the vicinity of the target site. Bioinformatics analysis identifies the AHJR-like domain in the putative Type III enzymes and functionally uncharacterized proteins.

Topology of Type II REases revisited; structural classes and the common conserved core

Type II restriction endonucleases (REases) are deoxyribonucleases that cleave DNA sequences with remarkable specificity. Type II REases are highly divergent in sequence as well as in topology, i.e. the connectivity of secondary structure elements. A widely held assumption is that a structural core of five β-strands flanked by two α-helices is common to these enzymes. We introduce a systematic procedure to enumerate secondary structure elements in an unambiguous and reproducible way, and use it to analyze the currently available X-ray structures of Type II REases. Based on this analysis, we propose an alternative definition of the core, which we term the αβα-core. The αβα-core includes the most frequently observed secondary structure elements and is not a sandwich, as it consists of a five-strand β-sheet and two α-helices on the same face of the β-sheet. We use the αβα-core connectivity as a basis for grouping the Type II REases into distinct structural classes. In these new structural classes, the connectivity correlates with the angles between the secondary structure elements and with the cleavage patterns of the REases. We show that there exists a substructure of the αβα-core, namely a common conserved core, ccc, defined here as one α-helix and four β-strands common to all Type II REase of known structure.

REBASE--enzymes and genes for DNA restriction and modification

REBASE is a comprehensive database of information about restriction enzymes, DNA methyltransferases and related proteins involved in the biological process of restriction-modification. It contains fully referenced information about recognition and cleavage sites, isoschizomers, neoschizomers, commercial availability, methylation sensitivity, crystal and sequence data. Experimentally characterized homing endonucleases are also included. All newly sequenced genomes are analyzed for the presence of putative restriction systems and these data are included within the REBASE. The contents or REBASE may be browsed from the web (http://rebase.neb.com/rebase/rebase.ftp.html) and selected compilations can be downloaded by ftp (ftp.neb.com). Additionally, monthly updates can be requested via email.

An EcoRI-RsrI chimeric restriction endonuclease retains parental sequence specificity

To test their structural and functional similarity, hybrids were constructed between EcoRI and RsrI, two restriction endonucleases recognizing the same DNA sequence and sharing 50% amino acid sequence identity. One of the chimeric proteins (EERE), in which the EcoRI segment His147-Ala206 was replaced with the corresponding RsrI segment, showed EcoRI/RsrI-specific endonuclease activity. EERE purified from inclusion bodies was found to have approximately 100-fold weaker activity but higher specific DNA binding affinity, than EcoRI. Increased binding is consistent with results of molecular dynamics simulations, which indicate that the number of hydrogen bonds formed with the recognition sequence increased in the chimera as compared to EcoRI. The success of obtaining an EcoRI-RsrI hybrid endonuclease, which differs from EcoRI by 22 RsrI-specific amino acid substitutions and still preserves canonical cleavage specificity, is a sign of structural and functional similarity shared by the parental enzymes. This conclusion is also supported by computational studies, which indicate that construction of the EERE chimera did not induce substantial changes in the structure of EcoRI. Surprisingly, the chimeric endonuclease was more toxic to cells not protected by EcoRI methyltransferase, than the parental EcoRI mutant. Molecular modelling revealed structural alterations, which are likely to impede coupling between substrate recognition and cleavage and suggest a possible explanation for the toxic phenotype.

Restriction endonuclease MvaI is a monomer that recognizes its target sequence asymmetrically

Restriction endonuclease MvaI recognizes the sequence CC/WGG (W stands for A or T, '/' designates the cleavage site) and generates products with single nucleotide 5'-overhangs. The enzyme has been noted for its tolerance towards DNA modifications. Here, we report a biochemical characterization and crystal structures of MvaI in an apo-form and in a complex with target DNA at 1.5 A resolution. Our results show that MvaI is a monomer and recognizes its pseudosymmetric target sequence asymmetrically. The enzyme consists of two lobes. The catalytic lobe anchors the active site residues Glu36, Asp50, Glu55 and Lys57 and contacts the bases from the minor grove side. The recognition lobe mediates all major grove interactions with the bases. The enzyme in the crystal is bound to the strand with T at the center of the recognition sequence. The crystal structure with calcium ions and DNA mimics the prereactive state. MvaI shows structural similarities to BcnI, which cleaves the related sequence CC/SGG and to MutH enzyme, which is a component of the DNA repair machinery, and nicks one DNA strand instead of making a double-strand break.

Novel protein fold discovered in the PabI family of restriction enzymes

Although structures of many DNA-binding proteins have been solved, they fall into a limited number of folds. Here, we describe an approach that led to the finding of a novel DNA-binding fold. Based on the behavior of Type II restriction-modification gene complexes as mobile elements, our earlier work identified a restriction enzyme, R.PabI, and its cognate modification enzyme in Pyrococcus abyssi through comparison of closely related genomes. While the modification methyltransferase was easily recognized, R.PabI was predicted to have a novel 3D structure. We expressed cytotoxic R.PabI in a wheat-germ-based cell-free translation system and determined its crystal structure. R.PabI turned out to adopt a novel protein fold. Homodimeric R.PabI has a curved anti-parallel beta-sheet that forms a 'half pipe'. Mutational and in silico DNA-binding analyses have assigned it as the double-strand DNA-binding site. Unlike most restriction enzymes analyzed, R.PabI is able to cleave DNA in the absence of Mg(2+). These results demonstrate the value of genome comparison and the wheat-germ-based system in finding a novel DNA-binding motif in mobile DNases and, in general, a novel protein fold in horizontally transferred genes.

Evolution of Pleopsidium (Lichenized Ascomycota) S943 Group I Introns and the Phylogeography of an Intron-Encoded Putative Homing Endonuclease

The sporadic distribution of nuclear group I introns among different fungal lineages can be explained by vertical inheritance of the introns followed by successive losses, or horizontal transfers from one lineage to another through intron homing or reverse splicing. Homing is mediated by an intron-encoded homing endonuclease (HE) and recent studies suggest that the introns and their associated HE gene (HEG) follow a recurrent cyclical model of invasion, degeneration, loss, and reinvasion. The purpose of this study was to compare this model to the evolution of HEGs found in the group I intron at position S943 of the nuclear ribosomal DNA of the lichen-forming fungus Pleopsidium. Forty-eight S943 introns were found in the 64 Pleopsidium samples from a worldwide screen, 22 of which contained a full-length HEG that encodes a putative 256-amino acid HE, and 2 contained HE pseudogenes. The HEGs are divided into two closely related types (as are the introns that encode them) that differ by 22.6% in their nucleotide sequences. The evolution of the Pleopsidium intron-HEG element shows strong evidence for a cyclical model of evolution. The intron was likely acquired twice in the genus and then transmitted via two or three interspecific horizontal transfers. Close geographical proximity plays an important role in intron-HEG horizontal transfer because most of these mobile elements were found in Europe. Once acquired in a lineage, the intron-HEG element was also vertically transmitted, and occasionally degenerated or was lost.

A Mutation in the Mod Subunit of EcoP15I Restriction Enzyme Converts the DNA Methyltransferase to a Site-specific Endonuclease

A closer inspection of the amino acid sequence of EcoP15I DNA methyltransferase revealed a region of similarity to the PDXn(D/E)XK catalytic site of type II restriction endonucleases, except for methionine in EcoP15I DNA methyltransferase instead of proline. Substitution of methionine at position 357 by proline converts EcoP15I DNA methyltransferase to a site-specific endonuclease. EcoP15I-M357P DNA methyltransferase specifically binds to the recognition sequence 5'-CAGCAG-3' and cleaves DNA asymmetrically EcoP151-M357P.DNA methyltransferase specifically binds to the recognition sequence 5'-CAGCAG-3' and cleaves DNA asymmetrically, 5'-CAGCAG(N)(10)-3', as indicated by the arrows, in presence of magnesium ions.

Restriction endonucleases that bridge and excise two recognition sites from DNA

Most restriction endonucleases bridge two target sites before cleaving DNA: examples include all of the translocating Type I and Type III systems, and many Type II nucleases acting at their sites. A subset of Type II enzymes, the IIB systems, recognise bipartite sequences, like Type I sites, but cut specified phosphodiester bonds near their sites, like Type IIS enzymes. However, they make two double-strand breaks, one either side of the site, to release the recognition sequence on a short DNA fragment; 34 bp long in the case of the archetype, BcgI. It has been suggested that BcgI needs to interact with two recognition sites to cleave DNA but whether this is a general requirement for Type IIB enzymes had yet to be established. Ten Type IIB nucleases were tested against DNA substrates with one or two copies of the requisite sequences. With one exception, they all bridged two sites before cutting the DNA, usually in concerted reactions at both sites. The sites were ideally positioned in cis rather than in trans and were bridged through 3-D space, like Type II enzymes, rather than along the 1-D contour of the DNA, as seen with Type I enzymes. The standard mode of action for the restriction enzymes that excise their recognition sites from DNA thus involves concurrent action at two DNA sites.

Structure of a Hyperthermophilic Archaeal Homing Endonuclease, I-Tsp061I: Contribution of Cross-domain Polar Networks to Thermostability

A novel LAGLIDADG-type homing endonuclease (HEase), I-Tsp061I, from the hyperthermophilic archaeon Thermoproteus sp. IC-061 16 S rRNA gene (rDNA) intron was characterized with respect to its structure, catalytic properties and thermostability. It was found that I-Tsp061I is a HEase isoschizomer of the previously described I-PogI and exhibits the highest thermostability among the known LAGLIDADG-type HEases. Determination of the crystal structure of I-Tsp061I at 2.1 A resolution using the multiple isomorphous replacement and anomalous scattering method revealed that the overall fold is similar to that of other known LAGLIDADG-type HEases, despite little sequence similarity between I-Tsp061I and those HEases. However, I-Tsp061I contains important cross-domain polar networks, unlike its mesophilic counterparts. Notably, the polar network Tyr6-Asp104-His180-107O-HOH12-104O-Asn177 exists across the two packed alpha-helices containing both the LAGLIDADG catalytic motif and the GxxxG hydrophobic helix bundle motif. Another important structural feature is the salt-bridge network Asp29-Arg31-Glu182 across N and C-terminal domain interface, which appears to contribute to the stability of the domain/domain packing. On the basis of these structural analyses and extensive mutational studies, we conclude that such cross-domain polar networks play key roles in stabilizing the catalytic center and domain packing, and underlie the hyperthermostability of I-Tsp061I.

Molecular characterization of the DNA methyltransferase M1.NcuI from Neisseria cuniculi ATCC 14688

The methyltransferase M1.NcuI is a member of the restriction-modification system in Neisseria cuniculi ATCC14688 and recognizes the asymmetric pentanucleotide sequence 5'-GAAGA-3'/3'-CTTCT-5'. We purified M1.NcuI to electrophoretic homogeneity using a four-step chromatographic procedure. M1.NcuI is a protein with M(r)=32,000+/-1000 under denaturing conditions. It modifies the recognition sequence by transferring the methyl group from S-adenosyl-l-methionine to the 3' adenine of the pentanucleotide sequence 5'-GAAGA-3'. M1.NcuI, like many other methyltransferases, occurs as a monomer in solution, as determined by gel filtration. Divalent cations inhibit the methylation activity of M1.NcuI. Optimal enzyme activity was observed at a pH of 8.0. M1.NcuI cross-reacted with anti-M1.MboII serum which reflects the similarity of M1.NcuI with M1.MboII at the amino acid level. The gene coding for the enzyme, designated ncuIM1, was cloned, sequenced and overexpressed in Escherichia coli. The structural gene is 780 nucleotides in length coding for a protein of 259 amino acids (M(r) 30,098). The presence and distribution of nine highly conserved amino acid sequence motifs and a putative target recognition domain in the enzyme structure suggest that M1.NcuI, similar to M1.MboII and M1.HpyAII, belongs to N(6)-adenine beta-class DNA methyltransferases.