Accelerated in vitro degradation of optically clear low-β sheet silk films by enzyme-mediated pretreatment

Silk fibroin/vitreous humor hydrogel scaffold modified by a carbodiimide crosslinker for wound healing

Natural-derived biomaterials can be used as substrates for the growth, proliferation, and differentiation of cells. In this study, bovine vitreous humor as a biological material was cross-linked to silk fibroin with different concentration ratios to design a suitable substrate for corneal tissue regeneration. The cross-linked samples were evaluated with different analyses such as structural, physical (optical, swelling, and degradation), mechanical, and biological (viability, cell adhesion) assays. The results showed that all samples had excellent transparency, especially those with higher silk fibroin content. Increasing the ratio of vitreous humor to silk fibroin decreased mechanical strength and increased swelling and degradation, respectively. There was no significant difference in the toxicity of the samples, and with the increase in vitreous humor ratio, adhesion and cell proliferation increased. Generally, silk fibroin with vitreous humor can provide desirable characteristics as a transparent film for corneal wound healing.

The post-processing temperature or humidity can importantly control the secondary structure and characteristics of silk fibroin films

Temperature and humidity (TH) are highly important factors that can control the secondary structure and characterization of silk fibroin (SF) biomaterials. In this study, the water stability, secondary structure, mechanical properties, surface morphology, and degradation of silk fibroin films (SFFs) with post-processing in different TH were investigated. Fourier transform infrared indicated that the SFF secondary structure did not change under low-relative humidity (RH) despite temperatures up to 180°C, while it transformed at 40°C with 100% RH in 10 min. A film with a higher tensile strength (42.1 ± 8.2 MPa) could be obtained after post-processing at 90°C/100% RH for 10 min. While a film with higher ductility (elongation at break: 198.8 ± 31.8%) was generated after post-processing at 40°C/100% RH for 10 min. Scanning electron microscope showed that the film presented a network structure of nanoparticles in series under certain TH post-treatment. Enzymatic hydrolysis proved that the SFFs containing a higher content of silk II structure degraded more slowly. Therefore, TH post-treatment is a relatively mild way to change the secondary structure and properties of SFFs, which can be widely used in loading drugs and maintaining the activity of drugs in SF biomaterials.

Effects of polyethylene glycol content on the properties of a silk fibroin/nano-hydroxyapatite/polyethylene glycol electrospun scaffold

To study the effects of polyethylene glycol (PEG) content on the mechanical properties and degradation of silk fibroin, nano-hydroxyapatite, and PEG (SF/nHAP/PEG) electrospun scaffolds, and according to the PEG ratio in the scaffold (SF : nHAP : PEG), test groups were divided as follows: PEG-0 (10 : 2), PEG-0.5 (10 : 2 : 0.5), PEG-1 (10 : 2 : 1), and PEG-2 (10 : 2 : 2). A series of tests to determine the mechanical properties, degradation rates, and osteogenic characteristics was undertaken. PEG facilitated SF degradation (PEG-1 > PEG-0.5 > PEG-0 > PEG-2), and the mass loss of the scaffolds in PEG-1 was more than 30%, while in PEG-2 it was less than 20% after 8 days (P < 0.05). The addition of PEG strengthened the mechanical properties of the scaffold (PEG-1 > PEG-2 > PEG-0.5 > PEG-0), as the Young's modulus increased from 41.72 ± 3.40 MPa for PEG-0 to 76.12 ± 3.73 MPa for PEG-1 (P < 0.05). PEG was favorable for the osteogenic differentiation of BMSCs (PEG-0.5 > PEG-1 > PEG-2 > PEG-0). The enhancements were attributable to the increased hydrophilicity and nHAP dispersion, as well as to the secondary structure transformation of SF. The PEG content was deemed to be optimal when the SF/nHAP/PEG ratio was equal to 10 : 2 : 1.