Microtubule and actin-dependent movement of the formin cdc12p in fission yeast

Profilin choreographs actin and microtubules in cells and cancer

Actin and microtubules play essential roles in aberrant cell processes that define and converge in cancer including: signaling, morphology, motility, and division. Actin and microtubules do not directly interact, however shared regulators coordinate these polymers. While many of the individual proteins important for regulating and choreographing actin and microtubule behaviors have been identified, the way these molecules collaborate or fail in normal or disease contexts is not fully understood. Decades of research focus on Profilin as a signaling molecule, lipid-binding protein, and canonical regulator of actin assembly. Recent reports demonstrate that Profilin also regulates microtubule dynamics and polymerization. Thus, Profilin can coordinate both actin and microtubule polymer systems. Here we reconsider the biochemical and cellular roles for Profilin with a focus on the essential cytoskeletal-based cell processes that go awry in cancer. We also explore how the use of model organisms has helped to elucidate mechanisms that underlie the regulatory essence of Profilin in vivo and in the context of disease.

Roles of formin nodes and myosin motor activity in Mid1p-dependent contractile-ring assembly during fission yeast cytokinesis

Two prevailing models have emerged to explain the mechanism of contractile-ring assembly during cytokinesis in the fission yeast Schizosaccharomyces pombe: the spot/leading cable model and the search, capture, pull, and release (SCPR) model. We tested some of the basic assumptions of the two models. Monte Carlo simulations of the SCPR model require that the formin Cdc12p is present in >30 nodes from which actin filaments are nucleated and captured by myosin-II in neighboring nodes. The force produced by myosin motors pulls the nodes together to form a compact contractile ring. Live microscopy of cells expressing Cdc12p fluorescent fusion proteins shows for the first time that Cdc12p localizes to a broad band of 30-50 dynamic nodes, where actin filaments are nucleated in random directions. The proposed progenitor spot, essential for the spot/leading cable model, usually disappears without nucleating actin filaments. alpha-Actinin ain1 deletion cells form a normal contractile ring through nodes in the absence of the spot. Myosin motor activity is required to condense the nodes into a contractile ring, based on slower or absent node condensation in myo2-E1 and UCS rng3-65 mutants. Taken together, these data provide strong support for the SCPR model of contractile-ring formation in cytokinesis.

Role of tropomyosin in formin-mediated contractile ring assembly in fission yeast

Like animal cells, fission yeast divides by assembling actin filaments into a contractile ring. In addition to formin Cdc12p and profilin, the single tropomyosin isoform SpTm is required for contractile ring assembly. Cdc12p nucleates actin filaments and remains processively associated with the elongating barbed end while driving the addition of profilin-actin. SpTm is thought to stabilize mature filaments, but it is not known how SpTm localizes to the contractile ring and whether SpTm plays a direct role in Cdc12p-mediated actin polymerization. Using "bulk" and single actin filament assays, we discovered that Cdc12p can recruit SpTm to actin filaments and that SpTm has diverse effects on Cdc12p-mediated actin assembly. On its own, SpTm inhibits actin filament elongation and depolymerization. However, Cdc12p completely overcomes the combined inhibition of actin nucleation and barbed end elongation by profilin and SpTm. Furthermore, SpTm increases the length of Cdc12p-nucleated actin filaments by enhancing the elongation rate twofold and by allowing them to anneal end to end. In contrast, SpTm ultimately turns off Cdc12p-mediated elongation by "trapping" Cdc12p within annealed filaments or by dissociating Cdc12p from the barbed end. Therefore, SpTm makes multiple contributions to contractile ring assembly during and after actin polymerization.

Gene expression studies of the dikaryotic mycelium and primordium of Lentinula edodes by serial analysis of gene expression

Lentinula edodes (Shiitake mushroom) is a common edible mushroom that has high nutritional and medical value. Although a number of genes involved in the fruit of the species have been identified, little is known about the process of differentiation from dikaryotic mycelium to primordium. In this study, serial analysis of gene expression (SAGE) was applied to determine the gene expression profiles of the dikaryotic mycelium and primordium of L. edodes in an effort to advance our understanding of the molecular basis of fruit body development. A total of 6363 tags were extracted (3278 from the dikaryotic mycelium and 3085 from the primordium), 164 unique tags matched the in-house expressed sequence tag (EST) database. The difference between the expression profiles of the dikaryotic mycelium and primordium suggests that a specific set of genes is required for fruit body development. In the transition from the mycelium to the primordium, different hydrophobins were expressed abundantly, fewer structural genes were expressed, transcription and translation became active, different genes became involved in intracellular trafficking, and stress responses were expressed. These findings advance our understanding of fruit body development. We used cDNA microarray hybridization and Northern blotting to verify the SAGE results, and found SAGE to be highly efficient in the performance of transcriptome analysis. To our knowledge, this is the first SAGE study of a mushroom.

Assembly of the cytokinetic contractile ring from a broad band of nodes in fission yeast

We observed live fission yeast expressing pairs of functional fluorescent fusion proteins to test the popular model that the cytokinetic contractile ring assembles from a single myosin II progenitor or a Cdc12p-Cdc15p spot. Under our conditions, the anillin-like protein Mid1p establishes a broad band of small dots or nodes in the cortex near the nucleus. These nodes mature by the addition of conventional myosin II (Myo2p, Cdc4p, and Rlc1p), IQGAP (Rng2p), pombe Cdc15 homology protein (Cdc15p), and formin (Cdc12p). The nodes coalesce laterally into a compact ring when Cdc12p and profilin Cdc3p stimulate actin polymerization. We did not observe assembly of contractile rings by extension of a leading cable from a single spot or progenitor. Arp2/3 complex and its activators accumulate in patches near the contractile ring early in anaphase B, but are not concentrated in the contractile ring and are not required for assembly of the contractile ring. Their absence delays late steps in cytokinesis, including septum formation and cell separation.

Formin-1 protein associates with microtubules through a peptide domain encoded by exon-2

Formin family proteins coordinate actin filaments and microtubules. The mechanisms by which formins bind and regulate the actin cytoskeleton have recently been well defined. However, the molecular mechanism by which formins coordinate actin filaments and microtubules remains poorly understood. We demonstrate here that Isoform-Ib of the Formin-1 protein (Fmn1-Ib) binds to microtubules via a protein domain that is physically separated from the known actin-binding domains. When expressed at low levels in NIH3T3 fibroblasts, Fmn1-Ib protein localizes to cytoplasmic filaments that nocodazole disruption confirmed as interphase microtubules. A series of progressive mutants of Fmn1-Ib demonstrated that deletion of exon-2 caused dissociation from microtubules and a stronger association with actin membrane ruffles. The exon-2-encoded peptide binds purified tubulin in vitro and is also sufficient to localize GFP to microtubules. Exon-2 does not contain any known formin homology domains. Deletion of exon 5, 7, 8, the FH1 domain or FH2 domain did not affect microtubule binding. Thus, our results indicate that exon-2 of Fmn1-Ib encodes a novel microtubule-binding peptide. Since formin proteins associate with actin filaments through the FH1 and FH2 domains, binding to interphase microtubules through this exon-2-encoded domain provides a novel mechanism by which Fmn1-Ib could coordinate actin filaments and microtubules.

FHOD1 coordinates actin filament and microtubule alignment to mediate cell elongation

Diaphanous-related formins (DRFs) are actin nucleators that mediate rearrangements of the actin cytoskeleton downstream of specific Rho GTPases. The DRF Formin Homology 2 Domain containing 1 (FHOD1) interacts with the Rac1 GTPase and induces the formation of and associates with bundled actin stress fibers. Here we report that active FHOD1 also coordinates microtubules with these actin stress fibers. Expression of a constitutive active FHOD1 variant in HeLa cells not only resulted in pronounced formation of FHOD1-actin fibers but also caused marked cell elongation and parallel alignment of microtubules without affecting cytokinesis of these cells. The analysis of deletions in the FH1 and FH2 functional regions revealed that the integrity of both domains was strictly required for FHOD1's effects on the cytoskeleton. Dominant-negative approaches demonstrated that filament coordination and cell elongation depended on the activity of the Rho-ROCK cascade, but did not involve Rac or Cdc42 activity. Experimental depolymerization of actin filaments or microtubules revealed that the formation of FHOD1-actin fibers was a prerequisite for the polarization of microtubules. However, only simultaneous disruption of both filament systems reversed the cell elongation induced by activated FHOD1. Thus, sustained cell elongation was a consequence of FHOD1-mediated actin-microtubule coordination. These results suggest filament coordination as a conserved function of mammalian DRFs.

Involvement of rhp23, a Schizosaccharomyces pombe homolog of the human HHR23A and Saccharomyces cerevisiae RAD23 nucleotide excision repair genes, in cell cycle control and protein ubiquitination

A functional homolog (rhp23) of human HHR23A and Saccharomyces cerevisiae RAD23 was cloned from the fission yeast Schizosaccharomyces pombe and characterized. Consistent with the role of Rad23 homologs in nucleotide excision repair, rhp23 mutant cells are moderately sensitive to UV light but demonstrate wild-type resistance to gamma-rays and hydroxyurea. Expression of the rhp23, RAD23 or HHR23A cDNA restores UV resistance to the mutant, indicating that rhp23 is a functional homolog of the human and S.cerevisiae genes. The rhp23::ura4 mutation also causes a delay in the G2 phase of the cell cycle which is corrected when rhp23, RAD23 or HHR23A cDNA is expressed. Rhp23 is present throughout the cell but is located predominantly in the nucleus, and the nuclear levels of Rhp23 decrease around the time of S phase in the cell cycle. Rhp23 is ubiquitinated at low levels, but overexpression of the rhp23 cDNA induces a large increase in ubiquitination of other proteins. Consistent with a role in protein ubiquitination, Rhp23 binds ubiquitin, as determined by two-hybrid analysis. Thus, the rhp23 gene plays a role not only in nucleotide excision repair but also in cell cycle regulation and the ubiquitination pathways.

Assembly and mechanosensory function of focal contacts

Focal contacts, focal complexes and related extracellular matrix adhesions are used by cells to explore their environment. These sites act as mechanosensory 'devices', where internal contractile forces or externally applied force can regulate the assembly of the adhesion site and trigger adhesion-dependent signaling involving Rho-family small G-proteins and other signaling pathways. The molecular mechanisms underlying these processes are discussed.

Fission yeast Aip3p (spAip3p) is required for an alternative actin-directed polarity program

Aip3p is an actin-interacting protein that regulates cell polarity in budding yeast. The Schizosaccharomyces pombe-sequencing project recently led to the identification of a homologue of Aip3p that we have named spAip3p. Our results confirm that spAip3p is a true functional homologue of Aip3p. When expressed in budding yeast, spAip3p localizes similarly to Aip3p during the cell cycle and complements the cell polarity defects of an aip3Delta strain. Two-hybrid analysis shows that spAip3p interacts with actin similarly to Aip3p. In fission yeast, spAip3p localizes to both cell ends during interphase and later organizes into two rings at the site of cytokinesis. spAip3p localization to cell ends is dependent on microtubule cytoskeleton, its localization to the cell middle is dependent on actin cytoskeleton, and both patterns of localization require an operative secretory pathway. Overexpression of spAip3p disrupts the actin cytoskeleton and cell polarity, leading to morphologically aberrant cells. Fission yeast, which normally rely on the microtubule cytoskeleton to establish their polarity axis, can use the actin cytoskeleton in the absence of microtubule function to establish a new polarity axis, leading to the formation of branched cells. spAip3p localizes to, and is required for, branch formation, confirming its role in actin-directed polarized cell growth in both Schizosaccharomyces pombe and Saccharomyces cerevisiae.

The beauty of the yeast: live cell microscopy at the limits of optical resolution

The yeast Saccharomyces cerevisiae is a very powerful system for cell biological research. Recent advances in electronic light microscopy together with the application of green fluorescent protein and other in vivo staining techniques have allowed novel and exciting insights into structural organization and dynamics of cells as small as yeast. Methods for staining yeast for microscopic inspection and for introducing tags for localization studies of proteins in living or fixed cells are summarized. Electronic light microscopy, video/deconvolution methods, and confocal laser scanning microscopy as novel tools for structural analyses, and their practical applications in yeast, are discussed.