Guidelines for membrane protein engineering derived from de novo designed model peptides

Minimal Increments of Hydrophobic Collapse within the N-Terminus of the Neuropeptide Galanin

The neuropeptide galanin has a 35-year history as an intriguing target in drug design owing to its implication as a potential anticonvulsant and neuronal trophic factor among many other therapeutically interesting functions including analgesia and mood alteration. In this study, we report the structural characterization of three synthetic fragments of the galanin N-terminus in buffered aqueous solution: hGal(2-12)KK, hGal(1-12)KK, and hGal(1-17)KK. High-field two-dimensional ¹H-¹H nuclear magnetic resonance (NMR) data were acquired for these fragments and used to derive distance restraints. We further utilized modified hydrogen bonding and dihedral restraints to reflect chemical shift patterns in the data, which revealed the signature of a weakly folded helix. Together, these sets of restraints were used to generate NMR structures of all three fragments, which depict a core of hydrophobic residues that cluster together regardless of the presence of a helical structure, and correspond to residues in the N-terminus of galanin that have been previously shown to be critical for binding its receptors. The helical structure only appears following the inclusion of Gly(1) in the sequence, and at longer sequence lengths, unlike many other peptides, the helix does not propagate. Rather, a few turns of poorly ordered helix appear to be a secondary consequence of clusters of hydrophobic sidechains that are conserved across all of the peptides in this study; the helices themselves appear ordered as a consequence of this clustering, and these clusters compare directly to those observed recently to make contacts between galanin and two of its receptor subtypes. Collapsed hydrophobic residues therefore organize and compose the functional core of human galanin and raise interesting questions about the nature of the conformational order in ligands that bind cell surface receptors.

cDNA Characterization and Expression of Selenium-Dependent CqGPx3 Isoforms in the Crayfish Cherax quadricarinatus under High Temperature and Hypoxia

Glutathione peroxidase 3 (GPx3) is the only extracellular selenoprotein (Sel) that enzymatically reduces H2O2 to H2O and O2. Two GPx3 (CqGPx3) cDNAs were characterized from crayfish Cherax quadricarinatus. The nerve cord CqGPx3a isoform encodes for a preprotein containing an N-terminal signal peptide of 32 amino acid residues, with the mature Sel region of 192 residues and a dispensable phosphorylation domain of 36 residues. In contrast, the pereiopods CqGPx3b codes for a precursor protein with 19 residues in the N-terminal signal peptide, then the mature 184 amino acid residues protein and finally a Pro-rich peptide of 42 residues. CqGPx3 are expressed in cerebral ganglia, pereiopods and nerve cord. CqGPx3a is expressed mainly in cerebral ganglia, antennulae and nerve cord, while CqGPx3b was detected mainly in pereiopods. CqGPx3a expression increases with high temperature and hypoxia; meanwhile, CqGPx3b is not affected. We report the presence and differential expression of GPx3 isoforms in crustacean tissues in normal conditions and under stress for high temperature and hypoxia. The two isoforms are tissue specific and condition specific, which could indicate an important role of CqGPx3a in the central nervous system and CqGPx3b in exposed tissues, both involved in different responses to environmental stressors.

Miniaturization of Anthracene-Containing Nonapeptides for Selective Precipitation/Recovery of Metallic Gold from Aqueous Solutions Containing Gold and Platinum Ions

The separation and recovery of noble metals is increasingly of interest, in particular the recovery of gold nanocrystals, which have applications in medicine and industry. Typically, metal recovery is performed using liquid–liquid extraction or electrowinning. However, it is necessary to develop noble metal recovery systems providing high selectivity in conjunction with a one-pot setup, ready product recovery, and the use of dilute aqueous solutions. In prior work, our group developed a selective gold recovery process using peptides. This previous research showed that RU065, a nonapeptide containing an anthracene moiety (at a concentration of 2.0 × 10−4 M), is capable of selective reduction of HAuCl4 to recover gold from a solution of HAuCl4 and H2PtCl6, each at 5.0 × 10−5 M. However, peptide molecules are generally costly to synthesize, and therefore it is important to determine the minimum required structural features to design non-peptide anthracene derivatives that could reduce operational costs. In this study, we used RU065 together with 23 of its fragment peptides and investigated the selective precipitation/recovery of metallic gold. RU0654–8, a fragment peptide comprising five amino acid residues (having two lysine, one L-isoleusine, and one L-alanine residue (representing six amide groups) along with an L-2-anthrylalanine residue) provided an Au/Pt atomic ratio of approximately 8, which was comparable to that for the full-length original RU065. The structural features identified in this study are expected to contribute to the design of non-peptide anthracene derivatives for low-cost, one-pot selective gold recovery.

Mechanistic predictions of the influence of collagen-binding domain sequences on human LL37 interactions with model lipids using quartz crystal microbalance with dissipation

Modifications of human-derived antimicrobial peptide LL37 with collagen binding domains (CBD-LL37) hold promise as alternatives to antibiotics due to their wider therapeutic ratio than unmodified LL37 when interacting with collagen substrates such as commercial wound dressings. However, CBD-LL37 lipid membrane interaction mechanisms (against both mammalian and bacterial lipids) are not well understood. Our goal was to develop a mechanistic explanation of how CBDs modulate peptide-lipid interactions leading to their observed bioactivities, in order to better understand their potential for clinical applications. The authors studied time- and concentration-dependent interactions of CBD-LL37 modified with collagenase (cCBD) and fibronectin (fCBD) CBDs, with zwitterionic and anionic supported lipid bilayers, in order to model mammalian erythrocytes and bacterial cells, respectively. Quartz crystal microbalance with dissipation monitoring (QCM-D) was used to characterize peptide-lipid interactions at concentrations in the immunomodulatory (0.5-1.0 μM), antimicrobial (1.0-5.0 μM), and cytotoxic (5.0-10.0 μM) ranges. Their prior work with zwitterionic membranes demonstrated that cCBD-LL37 formed transmembrane pores while fCBD-LL37 underwent surface adsorption. Our goal in this study is to better interpret these results, by investigating the data at a wider concentration range and for two types of lipids, and by applying the Voigt-Kelvin viscoelastic model to calculate thickness and density changes of the peptide-lipid films as a function of time and concentration, thus providing information to help build detailed mechanisms of peptide/bilayer interactions. For pore-forming cCBD-LL37 and unmodified LL37, they found that there was a relationship between layer thicknesses and pore formation, which was attributed to different peptide orientation changes influenced by bilayer charge prior to pore formation. Specifically, cCBD-LL37 at 0.5 and 1.0 μM demonstrated higher thicknesses on zwitterionic than anionic membranes, indicating that prior to insertion into zwitterionic membranes, it orients perpendicular to the surface, which was also consistent with the higher dissipation changes observed on zwitterionic membranes. fCBD-LL37 demonstrated a bilayer adsorption mechanism with a preference toward anionic lipids. Adsorption of fCBD-LL37 onto anionic lipids demonstrated a rapid first adsorption step that transitioned depending on the number of fCBD-LL37 molecules on the bilayer. For this peptide at higher concentrations, greater dissipation changes were observed than for fCBD-LL37 physically adsorbed onto surfaces without bilayers. This suggests that peptide-peptide interactions promoted by the fCBD domain dominated after saturation. The development of a structure-function relationship for cCBD-LL37 and fCBD-LL37 demonstrates promise for using QCM-D predictions to inform the rational design of novel, antimicrobial, and noncytotoxic CBD-LL37 for clinical applications.

Hydrophobic Clusters Raise the Threshold Hydrophilicity for Insertion of Transmembrane Sequences in Vivo

Insertion of a nascent membrane protein segment by the translocon channel into the bilayer is naturally promoted by high segmental hydrophobicity, but its selection as a transmembrane (TM) segment is complicated by the diverse environments (aqueous vs lipidic) the protein encounters and by the fact that most TM segments contain a substantial amount (∼30%) of polar residues, as required for protein structural stabilization and/or function. To examine the contributions of these factors systematically, we designed and synthesized a peptide library consisting of pairs of compositionally identical, but sequentially different, peptides with 19-residue core sequences varying (i) in Leu positioning (with five or seven Leu residues clustered into a contiguous "block" in the middle of the segment or "scrambled" throughout the sequence) and (ii) in Ser content (0-6 residues). The library was analyzed by a combination of biophysical and biological techniques, including HPLC retention times, circular dichroism measurements of helicity in micelle and phospholipid bilayer media, and relative blue shifts in Trp fluorescence maxima, as well as by the extent of membrane insertion in a translocon-mediated assay using microsomal membranes from dog pancreas endoplasmic reticulum. We found that local blocks of high hydrophobicity heighten the translocon's propensity to insert moderately hydrophilic sequences, until a "threshold hydrophilicity" is surpassed whereby segments no longer insert even in the presence of Leu blocks. This study codifies the prerequisites of apolar/polar content and residue positioning that define nascent TM segments, illustrates the accuracy in their prediction, and highlights how a single disease-causing mutation can tip the balance toward anomalous translocation/insertion.

The alkyl linkers in tandem-homodimers of a β-sheet-forming nonapeptide affect the self-assembled nanostructures

There is increasing interest in designing smart biomaterials by employing the self-assembly characteristics of synthetic peptides. The use of amyloid-like fibrils is one approach to nanometer- and micrometer-sized supramolecular structures. However, it is generally difficult to predict and/or analyze peptide conformations in nanostructures generated by the self-assembly of β-sheet-forming peptides such as amyloid-β peptide because each peptide experiences a slightly different environment. Therefore, a methodology for rationally designing peptide-based smart materials is required. In this study, we demonstrate the design and synthesis of tandem-homodimers of a β-sheet-forming peptide where the amino acid sequence is duplicated in series and joined via alkyl linkers of different chain length. The conformations of these tandem-homodimers within the self-assembled nanoarchitectures in aqueous solution were characterized. Our findings demonstrate that the hydrophobicity and/or flexibility of the alkyl linkers significantly affect the peptide conformation (extended or bent) of the self-assembled peptide nanostructures. We believe that the present tandem-homodimerization method represents a new direction for the rational design of peptide-based smart biomaterials.

Comparable Antigenicity and Immunogenicity of Oligomeric Forms of a Novel, Acute HIV-1 Subtype C gp145 Envelope for Use in Preclinical and Clinical Vaccine Research

Eliciting broadly reactive functional antibodies remains a challenge in human immunodeficiency virus type 1 (HIV-1) vaccine development that is complicated by variations in envelope (Env) subtype and structure. The majority of new global HIV-1 infections are subtype C, and novel antigenic properties have been described for subtype C Env proteins. Thus, an HIV-1 subtype C Env protein (CO6980v0c22) from an infected person in the acute phase (Fiebig stage I/II) was developed as a research reagent and candidate immunogen. The gp145 envelope is a novel immunogen with a fully intact membrane-proximal external region (MPER), extended by a polylysine tail. Soluble gp145 was enriched for trimers that yielded the expected "fan blade" motifs when visualized by cryoelectron microscopy. CO6980v0c22 gp145 reacts with the 4E10, PG9, PG16, and VRC01 HIV-1 neutralizing monoclonal antibodies (MAbs), as well as the V1/V2-specific PGT121, 697, 2158, and 2297 MAbs. Different gp145 oligomers were tested for immunogenicity in rabbits, and purified dimers, trimers, and larger multimers elicited similar levels of cross-subtype binding and neutralizing antibodies to tier 1 and some tier 2 viruses. Immunized rabbit sera did not neutralize the highly resistant CO6980v0c22 pseudovirus but did inhibit the homologous infectious molecular clone in a peripheral blood mononuclear cell (PBMC) assay. This Env is currently in good manufacturing practice (GMP) production to be made available for use as a clinical research tool and further evaluation as a candidate vaccine.

IMPORTANCE

At present, the product pipeline for HIV vaccines is insufficient and is limited by inadequate capacity to produce large quantities of vaccine to standards required for human clinical trials. Such products are required to evaluate critical questions of vaccine formulation, route, dosing, and schedule, as well as to establish vaccine efficacy. The gp145 Env protein presented in this study forms physical trimers, binds to many of the well-characterized broad neutralizing MAbs that target conserved Env epitopes, and induce cross-subtype neutralizing antibodies as measured in both cell line and primary cell assays. This subtype C Env gp145 protein is currently undergoing good manufacturing practice production for use as a reagent for preclinical studies and for human clinical research. This product will serve as a reagent for comparative studies and may represent a next-generation candidate HIV immunogen.

Hydrophobic blocks facilitate lipid compatibility and translocon recognition of transmembrane protein sequences

Biophysical hydrophobicity scales suggest that partitioning of a protein segment from an aqueous phase into a membrane is governed by its perceived segmental hydrophobicity but do not establish specifically (i) how the segment is identified in vivo for translocon-mediated insertion or (ii) whether the destination lipid bilayer is biochemically receptive to the inserted sequence. To examine the congruence between these dual requirements, we designed and synthesized a library of Lys-tagged peptides of a core length sufficient to span a bilayer but with varying patterns of sequence, each composed of nine Leu residues, nine Ser residues, and one (central) Trp residue. We found that peptides containing contiguous Leu residues (Leu-block peptides, e.g., LLLLLLLLLWSSSSSSSSS), in comparison to those containing discontinuous stretches of Leu residues (non-Leu-block peptides, e.g., SLSLLSLSSWSLLSLSLLS), displayed greater helicity (circular dichroism spectroscopy), traveled slower during sodium dodecyl sulfate–polyacrylamide gel electrophoresis, had longer reverse phase high-performance liquid chromatography retention times on a C-18 column, and were helical when reconstituted into 1-palmitoyl-2-oleoylglycero-3-phosphocholine liposomes, each observation indicating superior lipid compatibility when a Leu-block is present. These parameters were largely paralleled in a biological membrane insertion assay using microsomal membranes from dog pancreas endoplasmic reticulum, where we found only the Leu-block sequences successfully inserted; intriguingly, an amphipathic peptide (SLLSSLLSSWLLSSLLSSL; Leu face, Ser face) with biophysical properties similar to those of Leu-block peptides failed to insert. Our overall results identify local sequence lipid compatibility rather than average hydrophobicity as a principal determinant of transmembrane segment potential, while demonstrating that further subtleties of hydrophobic and helical patterning, such as circumferential hydrophobicity in Leu-block segments, promote translocon-mediated insertion.

Paracentrin 1, a synthetic antimicrobial peptide from the sea-urchin Paracentrotus lividus, interferes with staphylococcal and Pseudomonas aeruginosa biofilm formation

The rise of antibiotic-resistance as well as the reduction of investments by pharmaceutical companies in the development of new antibiotics have stimulated the investigation for alternative strategies to conventional antibiotics. Many antimicrobial peptides show a high specificity for prokaryotes and a low toxicity for eukaryotic cells and, due to their mode of action the development of resistance is considered unlikely. We recently characterized an antimicrobial peptide that was called Paracentrin 1 from the 5-kDa peptide fraction from the coelomocyte cytosol of the Paracentrotus lividus. In this study, the chemically synthesized Paracentrin 1, was tested for its antimicrobial and antibiofilm properties against reference strains of Gram positive and Gram negative. The Paracentrin 1 was active against planktonic form of staphylococcal strains (reference and isolates) and Pseudomonas aeruginosa ATCC 15442 at concentrations ranging from 12.5 to 6.2 mg/ml. The Paracentrin 1 was able to inhibit biofilm formation of staphylococcal and Pseudomonas aeruginosa strains at concentrations ranging from 3.1 to 0.75 mg/ml. We consider the tested peptide as a good starting molecule for novel synthetic derivatives with improved pharmaceutical potential.

Covalent modification of a ten-residue cationic antimicrobial peptide with levofloxacin

The rampant spread of antibiotic resistant bacteria has spurred interest in alternative strategies for developing next-generation antibacterial therapies. As such, there has been growing interest in cationic antimicrobial peptides (CAMPs) and their therapeutic applications. Modification of CAMPs via conjugation to auxiliary compounds, including small molecule drugs, is a new approach to developing effective, broad-spectrum antibacterial agents with novel physicochemical properties and versatile antibacterial mechanisms. Here, we've explored design parameters for engineering CAMPs conjugated to small molecules with favorable physicochemical and antibacterial properties by covalently affixing a fluoroquinolone antibiotic, levofloxacin, to the ten-residue CAMP Pep-4. Relative to the unmodified Pep-4, the conjugate was found to demonstrate substantially increased antibacterial potency under high salt concentrations. Historically, it has been observed that most CAMPs lose antibacterial effectiveness in such high ionic strength environments, a fact that has presented a challenge to their development as therapeutics. Physicochemical studies revealed that P4LC was more hydrophobic than Pep-4, while mechanistic findings indicated that the conjugate was more effective at disrupting bacterial membrane integrity. Although the inherent antibacterial effect of the incorporated levofloxacin molecules did not appear to be substantially realized in this conjugate, these findings nevertheless suggest that covalent attachment of small molecule antibiotics with favorable physicochemical properties to CAMPs could be a promising strategy for enhancing peptide performance and overall therapeutic potential. These results have broader applicability to the development of future CAMP-antibiotic conjugates for potential therapeutic applications.

Membrane transport piece by piece: production of transmembrane peptides for structural and functional studies

Membrane proteins are involved in all cellular processes from signaling cascades to nutrient uptake and waste disposal. Because of these essential functions, many membrane proteins are recognized as important, yet elusive, clinical targets. Recent advances in structural biology have answered many questions about how membrane proteins function, yet one of the major bottlenecks remains the ability to obtain sufficient quantities of pure and homogeneous protein. This is particularly true for human membrane proteins, where novel expression strategies and structural techniques are needed to better characterize their function and therapeutic potential. One way to approach this challenge is to determine the structure of smaller pieces of membrane proteins that can be assembled into models of the complete protein. This unit describes the rationale for working with single or multiple transmembrane segments and provides a description of strategies and methods to express and purify them for structural and functional studies using a maltose binding protein (MBP) fusion. The bulk of the unit outlines a detailed methodology and justification for producing these peptides under native-like conditions.

The transmembrane domains of the bacterial cell division proteins FtsB and FtsL form a stable high-order oligomer

FtsB and FtsL are two essential integral membrane proteins of the bacterial division complex or "divisome", both characterized by a single transmembrane helix and a juxtamembrane coiled coil domain. The two domains are important for the association of FtsB and FtsL, a key event for their recruitment to the divisome, which in turn allows the recruitment of the late divisomal components to the Z-ring and subsequent completion of the division process. Here we present a biophysical analysis performed in vitro that shows that the transmembrane domains of FtsB and FtsL associate strongly in isolation. Using Förster resonance energy transfer, we have measured the oligomerization of fluorophore-labeled transmembrane domains of FtsB and FtsL in both detergent and lipid. The data indicate that the transmembrane helices are likely a major contributor to the stability of the FtsB-FtsL complex. Our analyses show that FtsB and FtsL form a 1:1 higher-order oligomeric complex, possibly a tetramer. This finding suggests that the FtsB-FtsL complex is capable of multivalent binding to FtsQ and other divisome components, a hypothesis that is consistent with the possibility that the FtsB-FtsL complex has a structural role in the stabilization of the Z-ring.

Biophysical investigation of the membrane-disrupting mechanism of the antimicrobial and amyloid-like peptide dermaseptin S9

Dermaseptin S9 (Drs S9) is an atypical cationic antimicrobial peptide with a long hydrophobic core and with a propensity to form amyloid-like fibrils. Here we investigated its membrane interaction using a variety of biophysical techniques. Rather surprisingly, we found that Drs S9 induces efficient permeabilisation in zwitterionic phosphatidylcholine (PC) vesicles, but not in anionic phosphatidylglycerol (PG) vesicles. We also found that the peptide inserts more efficiently in PC than in PG monolayers. Therefore, electrostatic interactions between the cationic Drs S9 and anionic membranes cannot explain the selectivity of the peptide towards bacterial membranes. CD spectroscopy, electron microscopy and ThT fluorescence experiments showed that the peptide adopts slightly more β-sheet and has a higher tendency to form amyloid-like fibrils in the presence of PC membranes as compared to PG membranes. Thus, induction of leakage may be related to peptide aggregation. The use of a pre-incorporation protocol to reduce peptide/peptide interactions characteristic of aggregates in solution resulted in more α-helix formation and a more pronounced effect on the cooperativity of the gel-fluid lipid phase transition in all lipid systems tested. Calorimetric data together with ²H- and ³¹P-NMR experiments indicated that the peptide has a significant impact on the dynamic organization of lipid bilayers, albeit slightly less for zwitterionic than for anionic membranes. Taken together, our data suggest that in particular in membranes of zwitterionic lipids the peptide binds in an aggregated state resulting in membrane leakage. We propose that also the antimicrobial activity of Drs S9 may be a result of binding of the peptide in an aggregated state, but that specific binding and aggregation to bacterial membranes is regulated not by anionic lipids but by as yet unknown factors.

Design of transmembrane peptides: coping with sticky situations

Membrane proteins have central roles in cellular processes ranging from nutrient uptake to cell-cell communication, and are key drug targets. However, research on α-helical integral membrane proteins is in its relative infancy vs. water-soluble proteins, largely because of their water insolubility when extracted from their native membrane environment. Peptides with sequences that correspond to the membrane-spanning segments of α-helical integral membrane proteins, termed transmembrane (TM) peptides, provide valuable tools for the characterization of these molecules. Here we describe in detail protocols for the design of TM peptides from the sequences of natural α-helical integral membrane proteins and outline strategies for their synthesis and for improving their solubility properties.

Protein Structure in Membrane Domains

Of great interest to the academic and pharmaceutical research communities, helical transmembrane proteins are characterized by their ability to dissolve and fold in lipid bilayers—properties conferred by polypeptide spans termed transmembrane domains (TMDs). The apolar nature of TMDs necessitates the use of membrane-mimetic solvents for many structure and folding studies. This review examines the relationship between TMD structure and solvent environment, focusing on principles elucidated largely in membrane-mimetic environments with single-TMD protein and peptide models. Following a brief description of TMD sequence and conformational characteristics gleaned from the structural database, we present an overview of the conceptual models used to study folding in vitro. The impact of sequence and solvent context on the incorporation of TMDs into membranes, and its role in measurements of TMD self-assembly strengths, is then described. We conclude with a discussion of the nonspecific effects of membrane components on TMD stability.

Hydrophobic imbalance in the cytoplasmic domain of phospholamban is a determinant for lethal dilated cardiomyopathy

The sarco(endo)plasmic reticulum calcium ATPase (SERCA) and its regulatory partner phospholamban (PLN) are essential for myocardial contractility. Arg(9) → Cys (R9C) and Arg(14) deletion (R14del) mutations in PLN are associated with lethal dilated cardiomyopathy in humans. To better understand these mutations, we made a series of amino acid substitutions in the cytoplasmic domain of PLN and tested their ability to inhibit SERCA. R9C is a complete loss-of-function mutant of PLN, whereas R14del is a mild loss-of-function mutant. When combined with wild-type PLN to simulate heterozygous conditions, the mutants had a dominant negative effect on SERCA function. A series of targeted mutations in this region of the PLN cytoplasmic domain ((8)TRSAIRR(14)) demonstrated the importance of hydrophobic balance in proper PLN regulation of SERCA. We found that Arg(9) → Leu and Thr(8) → Cys substitutions mimicked the behavior of the R9C mutant, and an Arg(14) → Ala substitution mimicked the behavior of the R14del mutant. The results reveal that the change in hydrophobicity resulting from the R9C and R14del mutations is sufficient to explain the loss of function and persistent interaction with SERCA. Hydrophobic imbalance in the cytoplasmic domain of PLN appears to be a predictor for the development and progression of dilated cardiomyopathy.

Roles of hydrophobicity and charge distribution of cationic antimicrobial peptides in peptide-membrane interactions

Cationic antimicrobial peptides (CAPs) occur as important innate immunity agents in many organisms, including humans, and offer a viable alternative to conventional antibiotics, as they physically disrupt the bacterial membranes, leading to membrane lysis and eventually cell death. In this work, we studied the biophysical and microbiological characteristics of designed CAPs varying in hydrophobicity levels and charge distributions by a variety of biophysical and biochemical approaches, including in-tandem atomic force microscopy, attenuated total reflection-FTIR, CD spectroscopy, and SDS-PAGE. Peptide structural properties were correlated with their membrane-disruptive abilities and antimicrobial activities. In bacterial lipid model membranes, a time-dependent increase in aggregated β-strand-type structure in CAPs with relatively high hydrophobicity (such as KKKKKKALFALWLAFLA-NH(2)) was essentially absent in CAPs with lower hydrophobicity (such as KKKKKKAAFAAWAAFAA-NH(2)). Redistribution of positive charges by placing three Lys residues at both termini while maintaining identical sequences minimized self-aggregation above the dimer level. Peptides containing four Leu residues were destructive to mammalian model membranes, whereas those with corresponding Ala residues were not. This finding was mirrored in hemolysis studies in human erythrocytes, where Ala-only peptides displayed virtually no hemolysis up to 320 μM, but the four-Leu peptides induced 40-80% hemolysis at the same concentration range. All peptides studied displayed strong antimicrobial activity against Pseudomonas aeruginosa (minimum inhibitory concentrations of 4-32 μM). The overall findings suggest optimum routes to balancing peptide hydrophobicity and charge distribution that allow efficient penetration and disruption of the bacterial membranes without damage to mammalian (host) membranes.

Identifying and measuring transmembrane helix-helix interactions by FRET

Specific interactions between helical transmembrane domains (TMs) play essential roles in the mechanisms governing the folding, stability and assembly of integral membrane proteins. Thus, it is appealing to identify helix-helix contacts and to seek the structural determinants of such interactions at the molecular level. Here, we provide a protocol for detecting and measuring specific helix-helix interactions in liposomes by Förster resonance energy transfer (FRET), using peptides corresponding to the TM domains of an integral membrane protein. We give a detailed procedure and practical guidelines on how to design, prepare, handle, and characterize fluorescently labeled TM peptides reconstituted in large unilamellar lipid vesicles. We also discuss some critical aspects of FRET measurements to ensure the correct analysis and interpretation of spectral data. Our method uses tryptophan/pyrene as the donor-acceptor FRET pair, but it can be easily adapted to other fluorescence pairs and to other membrane mimetic environments. The ability to identify crucial interhelical contacts is a valuable tool for the study of the stability, assembly, and function of the important and experimentally challenging helical membrane proteins.

Beta-branched residues adjacent to GG4 motifs promote the efficient association of glycophorin A transmembrane helices

Protein transmenembrane (TM) segments participating in helix-helix packing commonly contain small residue patterns (termed GG4 or "small-xxx-small" motifs) at i and i + 4 positions. Within many TM segments - such as the glycophorin A (GpA) sequence L75IxxGVxxGVxxT87- the G17y-xxx-Gly83 motif often occurs in combination with large, usually beta3-branched aliphatic residues at adjacent positions, typified here by Val30 and Val84 residues. To explore the importance of local P-branched character on GpA dimerization, we made systematic replacements to all 16 combinations of single or double Ile, Leu, and AIa residues at GpA TM Val/Val positions 80 and 84. Using the TOXCAT system to assay self-oligomerization in the Escherichia coli inner membrane--we observed that (i) combinations of Val and lie residues maintained, or improved dimerization levels; (ii) single Ala or Leu mutant combinations with Val or Ile maintained near-wild type dimerization affinities; and (iii) in the absence of beta-branching, i.e., Leu/Leu, Ala/Ala and Ala/Leu combinations, GpA dimerization was significantly diminished. An apparent capacity of lle-containing mutants to increase GpA dimerization versus WT likely arises from improved van der Waals packing (vs. Val) within the locus of helix contact, consistent with correlations we noted in lipid accessibility measurements. Examination of several synthetic peptides with sequences corresponding to selected GpA mutants (VV VI, IV II, and LL) confirmed their dimerization on sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE). The overall results reinforce the importance of a beta-branch-containing "ridge" residue to complement a "small-xxx-small groove" in promotion of TM-TM interactions.

Positions of polar amino acids alter interactions between transmembrane segments and detergents

α-Helical transmembrane (TM) segments in membrane proteins are comprised primarily of hydrophobic amino acids that accommodate insertion from water into the nonpolar membrane bilayer. In many such segments, however, polar residues are also present for structural or functional reasons. These latter residues impair the local favorable acyl interactions required for solvation by hydrophobic media such as phospholipids in native bilayers or detergents used for in vitro characterization. Using a series of Lys-tagged designed TM-like peptides (typified by KK-YAAAIAAIAWAIAAIAAAIAA-KKK) in which single-Asn residue substitutions (from Ile or Ala) were made successively from the center of the hydrophobic region toward the C-terminus, we demonstrate that polar residues strongly alter the nature of the interaction between TM segments and the solvating detergent. Through the application of sodium dodecyl sulfate-polyacrylamide gel electrophoresis, circular dichroism spectroscopy, and tryptophan fluorescence, we observed drastic differences in the structures of the detergent-peptide complexes that contain relatively minor sequence differences. For example, the blue shift of the Trp fluorescence (indicating local detergent solvation at this location) differs by as much as ~10 nm depending upon the position of a single Asn substitution in an otherwise identical segment. The overall results suggest that polar point mutations occurring in a biological membrane will elicit comparable effects, placing a significant refolding burden on the local protein structure and potentially leading to disease states through altered protein--lipid interactions in membrane proteins.

Converting a marginally hydrophobic soluble protein into a membrane protein

δ-Helices are marginally hydrophobic α-helical segments in soluble proteins that exhibit certain sequence characteristics of transmembrane (TM) helices [Cunningham, F., Rath, A., Johnson, R. M. & Deber, C. M. (2009). Distinctions between hydrophobic helices in globular proteins and TM segments as factors in protein sorting. J. Biol. Chem., 284, 5395-402]. In order to better understand the difference between δ-helices and TM helices, we have studied the insertion of five TM-like δ-helices into dog pancreas microsomal membranes. Using model constructs in which an isolated δ-helix is engineered into a bona fide membrane protein, we find that, for two δ-helices originating from secreted proteins, at least three single-nucleotide mutations are necessary to obtain efficient membrane insertion, whereas one mutation is sufficient in a δ-helix from the cytosolic protein P450BM-3. We further find that only when the entire upstream region of the mutated δ-helix in the intact cytochrome P450BM-3 is deleted does a small fraction of the truncated protein insert into microsomes. Our results suggest that upstream portions of the polypeptide, as well as embedded charged residues, protect δ-helices in globular proteins from being recognized by the signal recognition particle-Sec61 endoplasmic-reticulum-targeting machinery and that δ-helices in secreted proteins are mutationally more distant from TM helices than δ-helices in cytosolic proteins.

Deletion of a terminal residue disrupts oligomerization of a transmembrane alpha-helix

In studies of the structural biology of membrane proteins, the success of strategies based on the "divide and conquer" approach, where peptides are used to model the individual transmembrane (TM) alpha-helices of membrane proteins, depends on the correct identification of the membrane-embedded TM alpha-helix amino acid sequence within the full-length protein. In the present work, we examine the effects of excluding or including TM boundary residues on the intrinsic properties of a Lys-tagged TM2 alpha-helix of myelin proteolipid protein (PLP), of parent sequence KKKK-66AFQYVIYGTASFFFLYGALLLAEG89-KKKK along with analogs containing an additional wild type Phe-90, Phe-90 and Tyr-91, and of a hydrophobic mutant Leu-90. Using protein gel electrophoresis, circular dichroism, and fluorescence resonance energy transfer in the membrane-mimetic detergent sodium dodecylsulfate (SDS), we demonstrate that the removal of a single amino acid from the C-terminus of this TM segment is enough to change its intrinsic properties, with TM2 66-89 displaying only a monomeric form, but with dimers arising for the other 3 peptides. A novel use of trifluoroethanol (TFE) as a maximal helix-supporting solvent demonstrated that peptides containing residues at positions 90 and (or) 90-91 displayed significantly increased helical content vs. the TM2 parent peptide. The findings suggest that deletion of critical C-terminal residue(s) tends to reposition the helix terminus toward the membrane-aqueous interface. Our overall results emphasize the potential influence of boundary residues on TM properties when using peptides as models for TM alpha-helices, and may implicate a role for these residues in membrane protein folding and assembly.

Structural analysis of the human cannabinoid receptor one carboxyl-terminus identifies two amphipathic helices

Recent research has implicated the C-terminus of G-protein coupled receptors in key events such as receptor activation and subsequent intracellular sorting, yet obtaining structural information of the entire C-tail has proven a formidable task. Here, a peptide corresponding to the full-length C-tail of the human CB1 receptor (residues 400-472) was expressed in E.coli and purified in a soluble form. Circular dichroism (CD) spectroscopy revealed that the peptide adopts an alpha-helical conformation in negatively charged and zwitterionic detergents (48-51% and 36-38%, respectively), whereas it exhibited the CD signature of unordered structure at low concentration in aqueous solution. Interestingly, 27% helicity was displayed at high peptide concentration suggesting that self-association induces helix formation in the absence of a membrane mimetic. NMR spectroscopy of the doubly labeled ((15)N- and (13)C-) C-terminus in dodecylphosphocholine (DPC) identified two amphipathic alpha-helical domains. The first domain, S401-F412, corresponds to the helix 8 common to G protein-coupled receptors while the second domain, A440-M461, is a newly identified structural motif in the distal region of the carboxyl-terminus of the receptor. Molecular modeling of the C-tail in DPC indicates that both helices lie parallel to the plane of the membrane with their hydrophobic and hydrophilic faces poised for critical interactions.

Antimicrobial peptide RP-1 structure and interactions with anionic versus zwitterionic micelles

Topologically, platelet factor-4 kinocidins consist of distinct N-terminal extended, C-terminal helical, and interposing gamma-core structural domains. The C-terminal alpha-helices autonomously confer direct microbicidal activity, and the synthetic antimicrobial peptide RP-1 is modeled upon these domains. In this study, the structure of RP-1 was assessed using several complementary techniques. The high-resolution structure of RP-1 was determined by NMR in anionic sodium dodecyl sulfate (SDS) and zwitterionic dodecylphosphocholine (DPC) micelles, which approximate prokaryotic and eukaryotic membranes, respectively. NMR data indicate the peptide assumes an amphipathic alpha-helical backbone conformation in both micelle environments. However, small differences were observed in the side-chain orientations of lysine, tyrosine, and phenylalanine residues in SDS versus DPC environments. NMR experiments with a paramagnetic probe indicated differences in positioning of the peptide within the two micelle types. Molecular dynamics (MD) simulations of the peptide in both micelle types were also performed to add insight into the peptide/micelle interactions and to assess the validity of this technique to predict the structure of peptides in complex with micelles. MD independently predicted RP-1 to interact only peripherally with the DPC micelle, leaving its spherical shape intact. In contrast, RP-1 entered deeply into and significantly distorted the SDS micelle. Overall, the experimental and MD results support a preferential specificity of RP-1 for anionic membranes over zwitterionic membranes. This specificity likely derives from differences in RP-1 interaction with distinct lipid systems, including subtle differences in side chain orientations, rather than gross changes in RP-1 structure in the two lipid environments.

Detergent binding explains anomalous SDS-PAGE migration of membrane proteins

Migration on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) that does not correlate with formula molecular weights, termed "gel shifting," appears to be common for membrane proteins but has yet to be conclusively explained. In the present work, we investigate the anomalous gel mobility of helical membrane proteins using a library of wild-type and mutant helix-loop-helix ("hairpin") sequences derived from transmembrane segments 3 and 4 of the human cystic fibrosis transmembrane conductance regulator (CFTR), including disease-phenotypic residue substitutions. We find that these hairpins migrate at rates of -10% to +30% vs. their actual formula weights on SDS-PAGE and load detergent at ratios ranging from 3.4-10 g SDS/g protein. We additionally demonstrate that mutant gel shifts strongly correlate with changes in hairpin SDS loading capacity (R(2) = 0.8), and with hairpin helicity (R(2) = 0.9), indicating that gel shift behavior originates in altered detergent binding. In some cases, this differential solvation by SDS may result from replacing protein-detergent contacts with protein-protein contacts, implying that detergent binding and folding are intimately linked. The CF-phenotypic V232D mutant included in our library may thus disrupt CFTR function via altered protein-lipid interactions. The observed interdependence between hairpin migration, SDS aggregation number, and conformation additionally suggests that detergent binding may provide a rapid and economical screen for identifying membrane proteins with robust tertiary and/or quaternary structures.

Detergent binding explains anomalous SDS-PAGE migration of membrane proteins

Migration on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) that does not correlate with formula molecular weights, termed "gel shifting," appears to be common for membrane proteins but has yet to be conclusively explained. In the present work, we investigate the anomalous gel mobility of helical membrane proteins using a library of wild-type and mutant helix-loop-helix ("hairpin") sequences derived from transmembrane segments 3 and 4 of the human cystic fibrosis transmembrane conductance regulator (CFTR), including disease-phenotypic residue substitutions. We find that these hairpins migrate at rates of -10% to +30% vs. their actual formula weights on SDS-PAGE and load detergent at ratios ranging from 3.4-10 g SDS/g protein. We additionally demonstrate that mutant gel shifts strongly correlate with changes in hairpin SDS loading capacity (R(2) = 0.8), and with hairpin helicity (R(2) = 0.9), indicating that gel shift behavior originates in altered detergent binding. In some cases, this differential solvation by SDS may result from replacing protein-detergent contacts with protein-protein contacts, implying that detergent binding and folding are intimately linked. The CF-phenotypic V232D mutant included in our library may thus disrupt CFTR function via altered protein-lipid interactions. The observed interdependence between hairpin migration, SDS aggregation number, and conformation additionally suggests that detergent binding may provide a rapid and economical screen for identifying membrane proteins with robust tertiary and/or quaternary structures.

Intrinsic amino acid side-chain hydrophilicity/hydrophobicity coefficients determined by reversed-phase high-performance liquid chromatography of model peptides: comparison with other hydrophilicity/hydrophobicity scales

An accurate determination of the intrinsic hydrophilicity/hydrophobicity of amino acid side-chains in peptides and proteins is fundamental in understanding many area of research, including protein folding and stability, peptide and protein function, protein-protein interactions and peptide/protein oligomerization, as well as the design of protocols for purification and characterization of peptides and proteins. Our definition of intrinsic hydrophilicity/hydrophobicity of side-chains is the maximum possible hydrophilicity/hydrophobicity of side-chains in the absence of any nearest-neighbor effects and/or any conformational effects of the polypeptide chain that prevent full expression of side-chain hydrophilicity/hydrophobicity. In this review, we have compared an experimentally derived intrinsic side-chain hydrophilicity/hydrophobicity scale generated from RP-HPLC retention behavior of de novo designed synthetic model peptides at pH 2 and pH 7 with other RP-HPLC-derived scales, as well as scales generated from classic experimental and calculation-based methods of octanol/water partitioning of Nalpha-acetyl-amino-acid amides or free energy of transfer of free amino acids. Generally poor correlation was found with previous RP-HPLC-derived scales, likely due to the random nature of the peptide mixtures in terms of varying peptide size, conformation and frequency of particular amino acids. In addition, generally poor correlation with the classical approaches served to underline the importance of the presence of a polypeptide backbone when generating intrinsic values. We have shown that the intrinsic scale determined here is in full agreement with the structural characteristics of amino acid side-chains.

Distinctions between hydrophobic helices in globular proteins and transmembrane segments as factors in protein sorting

Transmembrane (TM) segments in proteins can be distinguished in amino acid sequences as continuous stretches of hydrophobic residues. However, examination of a data base of helical water-soluble (globular) proteins revealed that nearly one-third contained helices of sufficient length to span a bilayer (> or =19 residues) that had mean hydrophobicity > or =actual TM segments. We now report that synthetic peptides corresponding to these globular protein sequences, which we termed "delta-helices," behave like native TM sequences and readily insert into membrane mimetic environments in helical conformations. As well, certain delta-helix sequences can integrate into the membrane bilayer when placed into a membrane-targeted chimeric protein. We establish that delta-helices can be distinguished computationally from bona fide TM segments by the decreased frequency of occurrence of Ile/Val residues and by their relatively decreased solvent accessibilities (versus other globular helices) within tertiary structure. The further observations that (i) delta-helices generally contain three or more charged residues and (ii) delta-helices display relatively even distribution of these charged residues along their lengths, rather than concentration near their N and C termini as observed for TM segments, may constitute key recognition factors in diverting delta-helices from the membrane in vivo. Although a discrete biological role for delta-helices remains to be pinpointed, our overall results suggest that such segments may be required for globular protein folding and identify additional factors that may be important in the correct selection of TM segments by the cellular machinery.

A small subset of signal peptidase residues are perturbed by signal peptide binding

Perturbations of the chemical shifts of a small subset of residues in the catalytically active domain of Escherichia coli signal peptidase I (SPase I) upon binding signal peptide suggest the contact surface on the enzyme for the substrate. SPase I, an integral membrane protein, is vital to preprotein transport in prokaryotic and eukaryotic secretory systems; it binds and proteolyses the N-terminal signal peptide of the preprotein, permitting folding and localization of the mature protein. Employing isotopically labeled C-terminal E. coli SPase I Delta2-75 and an unlabeled soluble synthetic alkaline phosphatase signal peptide, SPase I Delta2-75 was titrated with the signal peptide and 2D (1)H-(15)N heteronuclear single-quantum correlation nuclear magnetic resonance spectra revealed chemical shifts of specific enzyme residues sensitive to substrate binding. These residues were identified by 3D HNCACB, 3D CBCA(CO)NH, and 3D HN(CO) experiments. Residues Ile80, Glu82, Gln85, Ile86, Ser88, Gly89, Ser90, Met91, Leu95, Ile101, Gly109, Val132, Lys134, Asp142, Ile144, Lys145, and Thr234, alter conformation and are likely all in, or adjacent to, the substrate binding site. The remainder of the enzyme structure is unperturbed. Ramifications for conformational changes for substrate docking and catalysis are discussed.

Investigation of transmembrane proteins using a computational approach

BACKGROUND

An important subfamily of membrane proteins are the transmembrane alpha-helical proteins, in which the membrane-spanning regions are made up of alpha-helices. Given the obvious biological and medical significance of these proteins, it is of tremendous practical importance to identify the location of transmembrane segments. The difficulty of inferring the secondary or tertiary structure of transmembrane proteins using experimental techniques has led to a surge of interest in applying techniques from machine learning and bioinformatics to infer secondary structure from primary structure in these proteins. We are therefore interested in determining which physicochemical properties are most useful for discriminating transmembrane segments from non-transmembrane segments in transmembrane proteins, and for discriminating intrinsically unstructured segments from intrinsically structured segments in transmembrane proteins, and in using the results of these investigations to develop classifiers to identify transmembrane segments in transmembrane proteins.

RESULTS

We determined that the most useful properties for discriminating transmembrane segments from non-transmembrane segments and for discriminating intrinsically unstructured segments from intrinsically structured segments in transmembrane proteins were hydropathy, polarity, and flexibility, and used the results of this analysis to construct classifiers to discriminate transmembrane segments from non-transmembrane segments using four classification techniques: two variants of the Self-Organizing Global Ranking algorithm, a decision tree algorithm, and a support vector machine algorithm. All four techniques exhibited good performance, with out-of-sample accuracies of approximately 75%.

CONCLUSIONS

Several interesting observations emerged from our study: intrinsically unstructured segments and transmembrane segments tend to have opposite properties; transmembrane proteins appear to be much richer in intrinsically unstructured segments than other proteins; and, in approximately 70% of transmembrane proteins that contain intrinsically unstructured segments, the intrinsically unstructured segments are close to transmembrane segments.

Straightening and sequential buckling of the pore-lining helices define the gating cycle of MscS

We describe a mechanism connecting the adaptive behavior of the bacterial mechanosensitive channel MscS to the flexibility of the pore-lining helix TM3. Simulated expansion of the channel structure revealed straightening of a characteristic kink near Gly113 in the open state; return to the closed state produced an alternative kink at Gly121. Patch-clamp experiments showed that higher helical propensity introduced by a G113A mutation prevented inactivation. A similar mutation, G121A, kinetically impeded both closure and inactivation. Duplicating the glycines at each of these sites to increase flexibility produced directly opposite effects. The severely toxic G113A G121A mutation resulted in channels that could not inactivate or close with the release of tension. These data suggest that the open MscS features straight TM3 helices, which act as collapsible 'struts'. Closure and desensitization rely on buckling at Gly121, whereas the crystal-like kink at Gly113 is a feature of the inactivated state.

Hydrophobic Interactions in Complexes of Antimicrobial Peptides with Bacterial Polysaccharides

Biofilms of Pseudomonas aeruginosa are responsible for chronic lung infections in cystic fibrosis patients, where they are characterized by overproduction of the exopolysaccharide alginate and are recalcitrant to treatment with conventional antibiotics. Cationic antimicrobial peptides (CAPs) are potential alternatives for the treatment of multi-drug-resistant P. aeruginosa. However, alginate in P. aeruginosa biofilms has been proposed to bind these peptides through hydrophobic interactions, consequently reducing their activity [Chan et al., J Biol Chem 2004; 279: 38749-38754]. Here we perform biophysical analyses of the interactions of alginate with a series of novel peptide antibiotics (alpha-CAPs) of prototypic sequence KK-AAAXAAAAAXAAWAAXAAA-KKKK (where X = Phe, Trp or Leu). The hydrophobic interaction interface in alginate was investigated by examining (i) the effects of polysaccharide composition with respect to D-mannuronate and L-guluronate content; (ii) glycan chain length; (iii) alpha-CAP Trp fluorescence; and (iv) 1-anilinonaphthalene-8-sulfonate fluorescence. The results show that, while M and G residues produce equivalent effects, hydrophobic interactions between alginate and alpha-CAPs require a minimal glycan chain length. Peptide interactions with alginate are deduced to be mediated by hydrophobic microdomains comprised of pyranosyl C-H groups that are inducible upon formation of alpha-CAP-alginate complexes due to charge neutralization between the two species.

Membrane protein assembly patterns reflect selection for non-proliferative structures

Membrane proteins that regulate solute movement are often built from multiple copies of an identical polypeptide chain. These complexes represent striking examples of self-assembling systems that recruit monomers only until a prescribed level for function is reached. Here we report that three modes of assembly - distinguished by sequence and stoichiometry - describe all helical membrane protein complexes currently solved to high resolution. Using the 13 presently available non-redundant homo-oligomeric structures, we show that two of these types segregate with protein function: one produces energy-dependent transporters, while the other builds channels for passive diffusion. Given such limited routes to functional complexes, membrane proteins that self-assemble exist on the edge of aggregation, susceptible to mutations that may underlie human diseases.