Effects of N-methacryloyl-omega-amino acid primer pretreatment on the bond strength of the resin to acid-etched dentin

pH-dependent, thermosensitive polymeric nanocarriers for drug delivery to solid tumors

Polymeric micelles are promising carriers for anti-cancer agents due to their small size, ease of assembly, and versatility for functionalization. A current challenge in the use of polymeric micelles is the sensitive balance that must be achieved between stability during prolonged blood circulation and release of active drug at the tumor site. Stimuli-responsive materials provide a mechanism for triggered drug release in the acidic tumor and intracellular microenvironments. In this work, we synthesized a series of dual pH- and temperature-responsive block copolymers containing a poly(ε-caprolactone) (PCL) hydrophobic block with a poly(triethylene glycol) block that were copolymerized with an amino acid-functionalized monomer. The block copolymers formed micellar structures in aqueous solutions. An optimized polymer that was functionalized with 6-aminocaproic acid (ACA) possessed pH-sensitive phase transitions at mildly acidic pH and body temperature. Doxorubicin-loaded micelles formed from these polymers were stable at blood pH (~7.4) and showed increased drug release at acidic pH. In addition, these micelles displayed more potent anti-cancer activity than free doxorubicin when tested in a tumor xenograft model in mice.

New Index for the Stability of a Type I Collagen Affected by Hydrophobic Environment

Effects of hydrophobic environment adjusted by various alcohols on the structural stability of calfskin collagen (CSC) were studied to elucidate the nature of collagen-monomer interaction in adhesion. The stability of CSC in aqueous alcohol solutions was represented by its denaturation temperature, Td, measured by DSC. The hydrophobicity of the alcohol solutions was quantified with their specific dielectric constants, epsilon(r), calculated from their concentrations. The effect of each alcohol to stabilize or destabilize CSC was evaluated by the initial slope of each Td vs. epsilon(r) plot, denoted as -(dTd/d epsilon(r))ini and termed as stabilization power. Results showed that a hydrophobic environment with a smaller epsilon(r) lowered the stabilization power. Stabilization power ranged from -3 (strong destabilization) for phenol (epsilon(r) =12) to +0.3 (weak stabilization) for glycerol (epsilon(r)=47). In view of the encouraging results obtained in this study, the new index was therefore helpful in predicting the effects of new dental materials of known epsilon(r) values on the stability of dentinal collagen.

The effect of hydrophilic adhesive monomers on the stability of type I collagen

The adsorption effects of adhesive monomers on the structural stability of type I collagen were studied at an acid pH condition for two monomers: 2-hydroxyethyl methacrylate (HEMA), a neutral monomer and N-methacryloyl glycine (NMGly), an acidic monomer. Differential scanning calorimetry (DSC) measurements were done to assess the denaturation temperature (Td), which is a measure of the structural stability of the proteins, including the bovine tendon collagen (BTC). While HEMA lowered the Td of the BTC linearly with HEMA concentrations, NMGly exhibited a two-step decrease of the Td. The rate of decrease in the Td by the NMGly was by far greater than the rate of decrease with the HEMA. The first step had a larger slope than the second step in the Td vs. CNMGly plot. The degree of adsorption of these two monomers to the BTC was estimated from infrared absorption measurements on the monomer solutions of various concentrations, before and after the immersion of the BTC. Both the adsorption of HEMA to the BTC and the Td of the BTC were linearly dependent on HEMA concentrations. Conversely, NMGly was adsorbed to the BTC, again, in a two-step decrease similar to the Td vs. CNMGLy profile. An enhanced adsorption of NMGly, which might be attributed to a strong electrostatic interaction, was observed below 0.013 mol%. Circular dichroism measurements of the collagen of the same type as the BTC, in the absence and in the presence of the monomers, revealed that the native collagen helix structure was scarcely affected by the monomers. From these observations, it was concluded that (1) both of the monomers were adsorbed onto the BTC, which thus destabilized the triple helical collagen structure, and that (2) the effect was higher for NMGly in which the electrostatic attraction with the oppositely charged collagen might be effective at a pH of 3. If compared to HEMA, an acidic NMGly is a potential monomer that binds strongly to collagen and one that is hardly hydrolyzed.

Effect of primers containing N-methylolacrylamide or N-methylolmethacrylamide on dentin bond durability of a resin composite after 5 years

OBJECTIVES

The effect of experimental dentin primers containing N-methylolacrylamide (MEAA) or N-methylolmethacrylamide (MEMA) on bond durability of a resin composite (Photo Clearfil A) with a bonding agent (Clearfil Photo Bond) to bovine dentin was investigated.

METHODS

The etching agents were 10% maleic acid (10% MA), 10% phosphoric acid (10% PA) and 10% citric acid-3% ferric chloride (10-3 solution). Water solutions of 35% hydroxyethyl methacrylate (HEMA), 50% MEAA or 30% MEMA were used as dentin primers. The etched dentin was pre-treated with the dentin primers for 30s. The resin composite systems were applied in a Teflon tube positioned onto pre-treated dentin surfaces. After water immersion for 1 day and 5 years, the shear bond strengths were measured. The amounts of calcium dissolved with etching agents were measured using atomic absorption spectrometry. The thicknesses of hybrid layers at the dentin-resin interfaces treated with 6 mol/l HCl and 1% NaOCl were measured using scanning electron microscopy.

RESULTS

The bond strengths of the specimens (Controls) without primers to dentin etched with 10% MA and 10-3 solution significantly decreased after immersion in water for 5 years (p<0.05) while other bond strengths did not decrease. The bond strengths of the composites to MEMA- and MEAA-primed dentin were significantly higher than that of the control after 1 day, regardless of the types of etching agents (p<0.05). The 5 year bond strengths of the composites to HEMA-, MEMA- and MEAA-primed dentin were significantly higher than that of the control, regardless of the types of etching agents (p<0.05). The 1 day and 5 year bond strengths of the composite to MEAA-primed dentin were significantly higher than those of the composites to HEMA-primed dentin, regardless of the types of etching agents (p<0.05). The highest amount (182.3+/-8.0 microg/cm(2)) of dissolved calcium was determined for the pre-treatment with 10% PA, followed by that (152.0+/-6.9 microg/cm(2)) with 10% MA and that (140.1+/-2.8 microg/cm(2)) with 10-3 solution (p<0.05). The hybrid layer thicknesses (approximately 1 microm) for 10-3 solution were thinner than those (approximately 2 microm) for others after HCl immersion. For the controls, the hybrid layers after NaOCl immersion become narrower or disappeared. The main fracture pattern of specimens was a mixture of resin-dentin interface failure and dentin cohesive fracture after the bond test.

CONCLUSIONS

MEAA solution was more effective in improving the bond strength of the controls to etched dentin than was HEMA after 1 day and 5 years. Clearfil Photo Bond created good hybrid dentin layers which could resist NaOCl-attack and showed good dentin bond durability when dentin primers were used, regardless of the type of etching agent.

Adhesion of N-methacryloyl-omega-amino acid primers to collagen analyzed by 13C NMR

Previously, we reported that the strength of the interaction between N-methacryloyl-omega-amino acid (NMomegaA) primers and dentinal collagen exhibited a strong correlation with the bond strength of the resin to etched dentin. To determine the pertinent functional groups of the amino acid residues in the dentinal collagen, to which the amide and/or the carboxylic acid groups of the NMomegaAs are adsorbed, we used 13C NMR techniques--primarily through the observation of spin-lattice relaxation times, Ti--to investigate the adsorption characteristics resulting from the interaction of NMomegaAs with a model oligopeptide for collagen, (PPG)5. The addition of NMomegaAs to a collagenous solution resulted in a decrease in the T1 values of the carbonyl carbons attributed to the carboxylic acid of the C-terminal Gly and to the third amide of the N-terminal Pro residues in the (PPG)5 molecule, thus reflecting the formation of hydrogen-bonded interactions.

Bond strength of resin to acid-etched dentin studied by 13C NMR: interaction between N-methacryloyl-omega-amino acid primer and dentinal collagen

The application of the hydrophilic methacrylate primer to acid-etched dentin increases the bond strength of the resin to the acid-etched dentin. However, the mechanism for the bonding of the resin to dentinal collagen through the primer remains to be determined. Before a more effective adhesive primer can be developed, we must understand the adsorption behavior of the primer to the dentinal collagen. The purpose of this study was to determine how 5 derivatives of N-methacryloyl-omega-amino acid (NMomegaA) primers enhance the bonding of the resin to acid-etched dentin. The interaction between the NMomegaA primers and dentinal collagen was studied by the 13C NMR technique, including the observation of spin-lattice relaxation times, T1. When the dentinal collagen was dispersed into the NMomegaA solution, the T1 values of the two carbonyl carbons attributed to the amide and the carboxylic acid in the NMomegaA molecule decreased dramatically. This result was due to the interaction between the amide group and the carboxylic acid group in the NMomegaA molecule and the dentinal collagen molecule. The T1 values of these carbonyl carbons decreased when the number of methylene groups in the NMomegaA molecule increased. The interaction became stronger as the number of methylene groups in the NMomegaA molecule was increased. Further, the bond strength of the resin to the acid-etched dentin primed with NMomegaA increased with a decrease in the T1 value of the amide carbonyl carbon. The strength of the interaction of the NMomegaA primer to the dentinal collagen molecule, determined by the 13C NMR technique, showed a direct correlation with the bond strength of the resin to acid-etched dentin that was treated with the NMomegaA primer.

Dental materials: 1997 literature review

This review of the published literature on dental materials for the year 1997 has been compiled by the Dental Materials Panel of UK. It continues a series of annual reviews started in 1973. Emphasis has been placed upon publications, which report upon the materials science or clinical performance of the materials. The review has been divided by accepted materials classifications (fissure sealants, glass polyalkenoate cements, dentine bonding, dental amalgam, endodontic materials, casting alloys, ceramometallic restorations and resin-bonded bridges, ceramics, denture base resins and soft lining materials, impression materials, dental implant materials, orthodontic materials, biomechanics and image processing, resin composites, and casting investment materials and waxes). Three hundred and thirty three articles have been reviewed.

Effect of dentin primers containing N-methylolacrylamide or N-methylolmethacrylamide on dentin pretreatment

The effect of experimental dentin primers containing N-methylolacrylamide (MEAA) or N-methylolmethacrylamide (MEMA) on the bonding of three commercial light-cured resin composite systems [Restorative Z 100 (Scotchbond), Palfique Estelite (Macbond) and Photo Clearfil A (Clearfil Photobond)] to etched dentin was investigated. Water solutions of 35% hydroxyethyl methacrylate (HEMA). 50% MEAA or 30% MEMA were used as dentin primers. The dentin etched with 10% phosphoric acid solution was pretreated with dentin primers for 30 s. The resin composite systems were applied in a Teflon tube positioned onto pretreated dentin surfaces. After water immersion for 1 day, the shear bond strengths were measured. The thicknesses of hybrid layers at dentin-resin interfaces treated with 6 mol/l HCl and 1% NaOCl were measured by scanning electron microscopy. The dentin primer pretreatment increased the bond strengths of all resin composite systems. For Macbond and Clearfil Photobond, the bond strengths (14.2-26.5 MPa) with MEAA and MEMA were higher than those (10.5 and 17.8 MPa) with HEMA. All hybrid layer thicknesses were 1-1.5 microns after HCl immersion. The hybrid layers after NaOCl immersion become narrower. The main fracture pattern of specimens exhibiting high bond strengths (more than 14.2 MPa) was dentin cohesive fracture after bond test. For Macbond and Clearfil Photobond, the layers of specimens pretreated with MEAA and MEMA were clearly thicker than those pretreated with HEMA after NaOCl immersion. MEAA and MEMA solutions were more effective in improving the bond strength of Macbond and Clearfil Photobond to etched dentin than was HEMA. Macbond and Clearfil Photobond created good hybrid dentin layers which could resist NaOCl-attack when MEAA and MEMA solutions were used as dentin primers.

Adhesion mechanisms of resin to etched dentin primed with N-methacryloyl glycine studied by 13C-NMR

The origin of the pH-dependent bond strength of the resin to etched dentin treated with N-methacryloyl glycine (NMGly) primer was studied by 13C-nuclear magnetic resonance (NMR) including spin-lattice relaxation time, T1, observation. When the dentinal collagen was suspended in the NMGly solution at pH = 1.6, the T1 values of all the carbons attributed to the NMGly species were significantly decreased. This indicated the presence of an interaction between the NMGly and the dentinal collagen. To obtain detailed information of this interaction, the 13C-NMR spectra of the NMGly were measured in the presence of the model compound for the collagen, (Pro-Pro-Gly)5 at pH = 1.7. The 13C-NMR peaks of the carbonyl carbons of the amide and carboxylic acid in the NMGly species shifted to a higher field and the T1 values decreased. Furthermore, when the molar ratio of (Pro-Pro-Gly)5 to NMGly was decreased from 1:1 to 1:3, the T1 values of the carbonyl carbon attributed to the carboxylic acid in the C-terminal Gly residue of the oligopeptide decreased dramatically. It can be construed that this indicated the formation of a hydrogen bond between the amide, -NH and the carboxylic acid of the NMGly species and the carboxylic acid of the C-terminal Gly residue of the oligopeptide.