Characterization of soluble, salt-loaded, degradable PLGA films and their release of tetracycline

Chitosan-based smart stimuli-responsive nanoparticles for gene delivery and gene therapy: Recent progresses on cancer therapy

Recent cancer therapy research has found that chitosan (Ch)-based nanoparticles show great potential for targeted gene delivery. Chitosan, a biocompatible and biodegradable polymer, has exceptional properties, making it an ideal carrier for therapeutic genes. These nanoparticles can respond to specific stimuli like pH, temperature, and enzymes, enabling precise delivery and regulated release of genes. In cancer therapy, these nanoparticles have proven effective in delivering genes to tumor cells, slowing tumor growth. Adjusting the nanoparticle's surface, encapsulating protective agents, and using targeting ligands have also improved gene delivery efficiency. Smart nanoparticles based on chitosan have shown promise in improving outcomes by selectively releasing genes in response to tumor conditions, enhancing targeted delivery, and reducing off-target effects. Additionally, targeting ligands on the nanoparticles' surface increases uptake and effectiveness. Although further investigation is needed to optimize the structure and composition of these nanoparticles and assess their long-term safety, these advancements pave the way for innovative gene-focused cancer therapies.

Polymer Delivery Systems for Long-Acting Antiretroviral Drugs

The success of long-acting (LA) drug delivery systems (DDSs) is linked to their biocompatible polymers. These are used for extended therapeutic release. For treatment or prevention of human immune deficiency virus type one (HIV-1) infection, LA DDSs hold promise for improved regimen adherence and reduced toxicities. Current examples include Cabenuva, Apretude, and Sunlenca. Each is safe and effective. Alternative promising DDSs include implants, prodrugs, vaginal rings, and microarray patches. Each can further meet patients' needs. We posit that the physicochemical properties of the formulation chemical design can optimize drug release profiles. We posit that the strategic design of LA DDS polymers will further improve controlled drug release to simplify dosing schedules and improve regimen adherence.

The Dual Modification of PNIPAM and β-Cyclodextrin Grafted on Hyaluronic Acid as Self-Assembled Nanogel for Curcumin Delivery

Curcumin is an extract of turmeric (Curcuma longa) which possesses anti-inflammatory, anti-cancer and wound-healing effects and has been used as an active compound in biomedical research for many years. However, its poor solubility presents challenges for its use in drug delivery systems. A modified nanogel delivery system, with PNIPAM and β-cyclodextrin grafted onto hyaluronic acid (PNCDHA), was utilized to enhance the solubility. The polymer was characterized by NMR, and the inclusion complex between curcumin and β-cyclodextrin was confirmed by FTIR. The potential of this PNCDHA polymer complex as a drug delivery vehicle was supported by a curcumin encapsulation efficiency of 93.14 ± 5.6% and the release of encapsulated curcumin at 37 °C. At a concentration of 0.5% w/v in water, PNCDHA nanogels were biocompatible with fibroblast cell line (L929) up to a curcumin concentration of 50 µM. There was a direct concentration between curcumin loading and cellular internalization. A more detailed study of the cellular internalization of PNCDHA nanogel should be considered in order to clarify cellular delivery mechanisms and to assess how its viability as a carrier may be optimized.

Recent development in nanoencapsulation and delivery of natural bioactives through chitosan scaffolds for various biological applications

Nowadays, nano/micro-encapsulation as a pioneering technique may significantly improve the bioavailability and durability of Natural bioactives. For this purpose, chitosan as a bioactive cationic natural polysaccharide has been frequently used as a carrier because of its distinct chemical and biological properties, including polycationic nature, biocompatibility, and biodegradability. Moreover, polysaccharide-based nano/micro-formulations are a new and extensive trend in scientific research and development in the disciplines of biomedicine, bioorganic/ medicinal chemistry, pharmaceutics, agrochemistry, and the food industry. It promises a new paradigm in drug delivery systems and nanocarrier formulations. This review aims to summarize current developments in approaches for designing innovative chitosan micro/nano-matrix, with an emphasis on the encapsulation of natural bioactives. The special emphasis led to a detailed integrative scientific achievement of the functionalities and abilities for encapsulating natural bioactives and mechanisms regulated in vitro/in vivo release in various biological/physiological environments.

Preparation of aerogel beads and microspheres based on chitosan and cellulose for drug delivery: A review

Spherical aerogels are not easily broken during use and are easier to transport and store which can be used as templates for drug delivery. This review summarizes the possible approaches for the preparation of aerogel beads and microspheres based on chitosan and cellulose, an overview to the methods of manufacturing droplets is presented, afterwards, the transition mechanisms from sol to a spherical gel are reviewed in detail followed by different drying processes to obtain spherical aerogels with porous structures. Additionally, a specific focus is given to aerogel beads and microspheres to be regarded as drug delivery carriers. Furthermore, a core/shell architecture of aerogel beads and microspheres for controlled drug release is described and subjected to inspire readers to create novel drug release system. Finally, the conclusions and outlooks of aerogel beads and microspheres for drug delivery are summarized.

Functional Nanofibrous Biomaterials of Tailored Structures for Drug Delivery-A Critical Review

Nanofibrous biomaterials have huge potential for drug delivery, due to their structural features and functions that are similar to the native extracellular matrix (ECM). A wide range of natural and polymeric materials can be employed to produce nanofibrous biomaterials. This review introduces the major natural and synthetic biomaterials for production of nanofibers that are biocompatible and biodegradable. Different technologies and their corresponding advantages and disadvantages for manufacturing nanofibrous biomaterials for drug delivery were also reported. The morphologies and structures of nanofibers can be tailor-designed and processed by carefully selecting suitable biomaterials and fabrication methods, while the functionality of nanofibrous biomaterials can be improved by modifying the surface. The loading and releasing of drug molecules, which play a significant role in the effectiveness of drug delivery, are also surveyed. This review provides insight into the fabrication of functional polymeric nanofibers for drug delivery.

Hierarchical assembly in PLA-PEO-PLA hydrogels with crystalline domains and effect of block stereochemistry

Understanding the development of microstructure (e.g., structures with length scales roughly 0.5-500 μm) in hydrogels is crucial for their use in several biomedical applications. We utilize ultra-small-angle neutron scattering (USANS) and confocal microscopy to explore microstructure of poly(lactide)-poly(ethylene oxide)-poly(lactide) (PLA-PEO-PLA) triblock copolymer hydrogels with varying l/d-lactide ratio. We have previously found that these polymers self-assemble on the nanoscale into micelles. Here, we observe large-scale structures with diverse morphologies, including highly porous self-similar networks with characteristic sizes spanning approximately 120 nm-200 μm. These structural features give rise to power-law scattering indicative of fractal structures in USANS. Mass fractal and surface fractal structures are found for gels with l/d ratios of 80/20 and 50/50, respectively. Confocal microscopy shows microscale water-filled channels and pores that are more clearly evident in gels with a higher fraction of l-lactide in the PLA block as compared to the 50/50 hydrogels. Tuning block stereochemistry may provide a means of controlling the self-assembly and structural evolution at both the nanoscale and microscale, impacting application of these materials in tissue engineering and drug delivery.

Novel biodegradable nanocarriers for enhanced drug delivery

With the refinement of functional properties, the interest around biodegradable materials, in biorelated applications and, in particular, in their use as controlled drug-delivery systems, increased in the last decades. Biodegradable materials are an ideal platform to obtain nanoparticles for spatiotemporal controlled drug delivery for the in vivo administration, thanks to their biocompatibility, functionalizability, the control exerted on delivery rates and the complete degradation. Their application in systems for cancer treatment, brain and cardiovascular diseases is already a consolidated practice in research, while the bench-to-bedside translation is still late. This review aims at summarizing reported applications of biodegradable materials to obtain drug-delivery nanoparticles in the last few years, giving a complete overview of pros and cons related to degradable nanomedicaments.

In Situ Strategy to Encapsulate Antibiotics in a Bioinspired CaCO3 Structure Enabling pH-Sensitive Drug Release Apt for Therapeutic and Imaging Applications

Herein we demonstrate a bioinspired method involving macromolecular assembly of anionic polypeptide with cationic peptide-oligomer that allows for in situ encapsulation of antibiotics like tetracycline in CaCO3 microstructure. In a single step one-pot process, the encapsulation of the drug occurs under desirable environmentally benign conditions resulting in drug loaded CaCO3 microspheres. While this tetracycline-loaded sample exhibits pH dependent in vitro drug-release profile and excellent antibacterial activity, the encapsulated drug or the dye-conjugated peptide emits fluorescence suitable for optical imaging and detection, thereby making it a multitasking material. The efficacy of tetracycline loaded calcium carbonate microspheres as pH dependent drug delivery vehicles is further substantiated by performing cell viability experiments using normal and cancer cell lines (in vitro). Interestingly, the pH-dependent drug release enables selective cytotoxicity toward cancer cell lines as compared to the normal cells, thus having the potential for further development of therapeutic applications.

Controlled initial surge despite high drug fraction and high solubility

Potential connections between release profiles and solvent evaporation rates alongside polymer chemistry were elucidated for the release of tetracycline hydrochloride from two different poly (d, l-lactide-co-glycolide) (PLGA) film matrices containing high drug fractions (50%, 30%, and 15%), and prepared at two distinct solvent evaporation rates. At highest tetracycline concentrations (50%), (i) the early release rates were ≤0.5 μg/min in all cases; (ii) release was linear from systems fabricated with lower lactic content and slower solvent evaporation rate and bimodal from systems fabricated with higher lactic content and faster evaporation rate; (iii) surface fractions covered by the drug were similar at both evaporation rates for 85:15 PLGA but very different for 50:50 PLGA, leading to unexpectedly reduced early release from 50:50 PLGA than from 85:15 PLGA when both the matrices were fabricated using a slower evaporation rate. These features remained unaffected in case of low drug concentration. Results suggested that during the formation of the drug-polymer microstructure, the combined effect of polymer chemistry and solvent evaporation rate sets apart the surface characteristics and the initial release profiles of systems containing high drug fraction, and an appropriate combination of these parameters may be utilized to control the early stage of drug release.

Doxycycline delivery from PLGA microspheres prepared by a modified solvent removal method

We report on the development of a modified solvent removal method for the encapsulation of hydrophilic drugs within poly(lactic-co-glycolic acid) (PLGA). Using a water/oil/oil double emulsion, hydrophilic doxycycline was encapsulated within PLGA spheres with particle diameters ranging from approximately 600 nm to 19 µm. Encapsulation efficiencies of up to 74% were achieved for theoretical loadings from 1% to 10% (w/w), with biphasic release over 85 days with nearly complete release at the end of this time course. About 1% salt was added to the formulations to examine its effects on doxycycline release; salt modulated release only by increasing the magnitude of initial release without altering kinetics. Fourier transform infrared spectroscopy indicated no characteristic differences between doxycycline-loaded and control spheres. Differential scanning calorimetry and X-ray diffraction suggest that there may be a molecular dispersion of the doxycycline within the spheres and the doxycycline may be in an amorphous state, which could explain the slow, prolonged release of the drug.

Drug intercalation in layered double hydroxide clay: application in the development of a nanocomposite film for guided tissue regeneration

It has been proposed that localized and controlled delivery of alendronate and tetracycline to periodontal pocket fluids via guided tissue regeneration (GTR) membranes may be a valuable adjunctive treatment for advanced periodontitis. The objectives of this work were to develop a co-loaded, controlled release tetracycline and alendronate nanocomposite plasticized poly(lactic-co-glycolic acid) (PLGA) film that would form a suitable matrix supporting osteoblast proliferation and differentiation. Alendronate release was successfully controlled, with complete suppression of the burst phase of release by intercalation of alendronate anions in magnesium/aluminum layered double hydroxide (LDH) clay nanoparticles and dispersed in the PLGA film matrix. Tetracycline, loaded as free drug into the film together with alendronate-LDH clay complex released more rapidly than alendronate, but showed evidence of intercalation in the LDH clay particles. The dual drug loaded nanocomposite films were biocompatible with osteoblasts and after 5 week incubations, significant increase in alkaline phosphatase activity and bone nodule formation were observed.

Biodegradable films developed by electrospray deposition for sustained drug delivery

The objective of present study is to develop biodegradable films with controllable thickness for sustained release applications using a combination of electrospray deposition techniques. The model anticancer drug-paclitaxel is encapsulated inside PLGA films. The morphology observed by atomic force microscopy and scanning electron microscopy reveals that the film has a flat surface together with a dense structure. X-ray photo-electron spectroscopy results show that some amount of paclitaxel is found on the surface layer of films. X-ray diffractometry (XRD) analysis suggests that paclitaxel is in an amorphous form in the polymer matrix even for up to 30% drug loading. Differential scanning calorimetry (DSC) study further proved that paclitaxel is in a solid solution state in polymer films. In vitro release profile indicates that sustained release of paclitaxel from the films is for more than 85 days, without the tri-phasic release profile typically for PLGA films. The phase contrast images clearly suggests a slight decrease in the number of C6 glioma cells as the paclitaxel loading within the polymeric films is increased. The results of MTT assay employed to quantify the cell viability correlates well with the observation from phase contrast microscopy.

Chemical degradation of peptides and proteins in PLGA: a review of reactions and mechanisms

Biodegradable poly(lactide-co-glycolide) (PLGA) polymers have been studied extensively for the controlled release of peptide and protein drugs. In addition to polymer biodegradation, chemical degradation of the incorporated peptide/protein has also been reported in PLGA devices, and the role of the polymer in promoting these reactions has been debated. This review summarizes the peptide/protein chemical degradation reactions that have been reported in PLGA systems and their mechanisms. Reported methods for stabilizing peptides and proteins in PLGA devices are also discussed.

Effects of alginate coated on PLGA microspheres for delivery tetracycline hydrochloride to periodontal pockets

The effects of alginate coated on tetracycline (Tc) loaded poly (D, L-lactic-co-glycolic acid) (PLGA) microspheres fabricated by double emulsion solvent evaporation technique for local delivery to periodontal pocket were investigated. Alginate coated PLGA microspheres showed smoother surface but enlarged their particle sizes compared with those of uncoated ones. In addition, alginate coated microspheres enhanced Tc encapsulation efficiency (E.E.) from 11.5 +/- 0.5% of uncoated ones to 17.9 +/- 0.5%. Moreover, all of the coated PLGA microspheres even fabricated at different conditions could prolong Tc release from 9-12 days with 50% or higher in cumulative release of Tc compared with those of uncoated ones. The swelling ratios of PLGA microspheres for alginate coated or uncoated ones, one of the possible mechanisms for enhancing Tc release for the coated ones, were measured. The results showed that 20% or higher in swelling ratio for the coated microspheres at the earlier stage of hydration (e.g. < or = 24 h) could be an important factor to result in high Tc release compared to the uncoated ones. In conclusion, alginate coated Tc loaded PLGA microspheres could enhance Tc delivery to periodontal pocket by enhancing drug encapsulated efficiency, released quantities and sustained release period compared with uncoated ones.

Characterization of perivascular poly(lactic-co-glycolic acid) films containing paclitaxel

The objectives of this study were to investigate the use of poly(lactic-co-glycolic acid) (PLGA) for the formulation of paclitaxel loaded films and to characterize these films for potential application as perivascular "wraps" to prevent restenosis. Films were manufactured from PLGA blended with either methoxypolyethylene glycol (MePEG) or a diblock copolymer composed of poly(D,L-lactic acid)-block-methoxypolyethylene glycol, PDLLA-MePEG (diblock) by solvent evaporation on teflon discs. Elasticity was determined by gravimetric stress/strain analysis. Thermal analysis was determined using differential scanning calorimetry (DSC). Changes in film composition and degradation in aqueous media were determined using gel permeation chromatography (GPC). Paclitaxel release from films was measured by incubation of the films in phosphate buffered saline (PBS) with drug analysis by HPLC methods. The addition of MePEG or diblock to PLGA caused a concentration dependent increase in the elasticity of films, due to plasticizing effects. DSC analysis showed that MePEG and diblock caused a concentration dependent decrease in the glass transition temperature (Tg) of PLGA indicating miscibility of the polymers. When placed in aqueous media, more than 75% of MePEG dissolved out of the PLGA films within 2 days, whereas diblock partitioned slowly and in a controlled manner out of the films. Paclitaxel release from PLGA/MePEG films was very slow with less than 5% of the encapsulated drug being released over 2 weeks. The addition of 30% diblock to paclitaxel loaded PLGA films caused a substantial increase (five- to eight-fold) in the release rate of paclitaxel. PLGA films containing 30% diblock and either 1% or 5% paclitaxel were partially or completely degraded following perivascular implantation in rats.

An Easy Sonochemical Route for the Encapsulation of Tetracycline In Bovine Serum Albumin Microspheres

A one-step sonochemical process starting with the native BSA and tetracycline was employed to encapsulate the antibiotic drug in microspheres of BSA. The tetracycline loading studies showed that the maximum tetracycline loading capacity was found to be 65%. The antimicrobial activity of the tetracycline loaded in BSA microspheres was demonstrated on two bacterial strains that are sensitive to tetracycline.

Potential applications of PLGA film-implants in modulating in vitro drugs release

In this work we evaluate poly(lactic/glycolic) acid (PLGA) film-implants as potential biodegradable devices for controlled release of two different drugs: 5-Fluorouridine (5-FUR), a conventional low molecular weight water-soluble compound and SPf66 malaria vaccine, a therapeutic synthetic polypeptide. Three types of devices were prepared by solvent-casting techniques alone or combined with compression method: simple monolithic discs (SMD), multilayer discs with a central monolithic layer (MLDM), and multilayer discs with a central drug-reservoir (MLDR). For the highly water-soluble drug, 5-FUR, in vitro release from SMD showed an initial burst (24% in 2 h) followed by prolonged release over 20 days. In contrast, from a MLDM (two drug-free PLGA discs were added to the SMD) showed an initial lag-time of 12 days followed by a very fast second release phase. Finally, when the load of this system was increased from 3 to 9%, an extended release over 20 days with a low burst effect was obtained. For SPf66, the central reservoir containing the synthetic polypeptide MLDR reduces the possibility of degradation due to peptide contact with polymer solution. When four layers were added, 10 days sustained-release was obtained without any burst effect. With six layers a moderate pulse was obtained, 18-22 days from the beginning of the release. The results show the suitability of the proposed devices to control release and avoid the burst effect with highly water-soluble drugs; as well as modulate in vitro peptide release.

Chitin/PLGA blend microspheres as a biodegradable drug-delivery system: phase-separation, degradation and release behavior

A novel chitin-based microsphere was developed for anti-cancer drug-delivery purpose in the present study. These biodegradable microspheres were prepared by directly blending chitin with different contents of poly(D,L-lactide-co-glycolide 50:50) (PLGA 50/50) in dimethylacetamide-lithium chloride solution, and following it by coagulating in water via wet phase inversion. Scanning electron microscopy (SEM) micrography of the blend microsphere showed that there are numerous PLGA particulates homogeneously dispersed in chitin matrix, suggesting the occurrence of obvious phase separation from the blended chitin and PLGA 50/50 phase due to their thermodynamic incompatibility. Degradation of the chitin/PLGA 50/50 blend microsphere depends on the surface erosion of chitin phase and bulk hydrolysis of PLGA phase, according to the examinations of SEM and differential scanning calorimetry studies. Weight loss of the chitin/PLGA 50/50 blend microsphere increases with the increase of chitin content in the microsphere. A two-phase drug-release model is observed from the release of chlorambucil from chitin/PLGA 50/50 blend microspheres. The initial stage of drug-release rate increases with the increased chitin content due to the hydration and surface erosion of hydrophilic chitin phase; however, the following stage of slow release is sustained for several days, mainly contributed by the bulk hydrolysis of hydrophobic PLGA phase. In conclusion, such a chitin/PLGA 50/50 blend microsphere is novel and interesting, and may be used as a special drug-delivery system.

Modifying the release of gentamicin from microparticles using a PLGA blend

Carrier systems for local gentamicin (GS) treatment based on collagen sponges and polymethylmethacrylate beads show pharmacokinetic disadvantages in their GS-release profiles. Therefore, poly(lactic-co-glycolic acid) (PLGA) microparticles were devised. None of the five poly(alpha-hydroxy acid)s tested resulted in the desired antibiotic release over approximately one week. However, preparing microparticles from a 50/50 blend of Resomer RG 502H, an uncapped variety, and Resomer RG 503, an endcapped polymer, yielded the targeted liberation profile. The mechanism of GS release was investigated by analyzing water uptake and polymer molecular weight. Release of GS from RG 502H particles occurred instantaneously and coincided with substantial water penetration. Particles prepared from RG 503 started out at a higher molecular weight and since the endcapped polymer takes up less water, the decrease in molecular weight was delayed. The threshold of collapse was reached after two weeks, which coincided with water penetration and GS release. For the 50/50 RG 502H/RG 503 blend, this process was delayed for two to three days. Hydrolysis occurred at the same rate as for RG 502H due to the high water content as a consequence of the uncapped polymer fraction and renders GS release over one week with release limited to 30% in the first two days due to the endcapped polymer fraction of higher molecular weight. Thus, the mixture of endcapped and uncapped Resome exhibits a new quality for adjusting drug release from poly(alpha-hydroxy acid)s.

Effect of lecithin and MgCO3 as additives on the enzymatic activity of carbonic anhydrase encapsulated in poly(lactide-co-glycolide) (PLGA) microspheres

A model enzyme, carbonic anhydrase, was encapsulated and released from poly(lactide-co-glycolide) (PLGA) microspheres (1-3 microm) made by a novel phase inversion technique. Lecithin was used as a surfactant in the encapsulation process and was incorporated in either the organic phase, aqueous phase, both phases, or not at all. Additional microspheres were also made with lecithin incorporated in the aqueous phase and a basic salt, MgCO3, in the polymeric phase. Released carbonic anhydrase, protein extracted from microspheres, or enzyme incubated with lecithin and PLGA were analyzed via HPLC and activity assay to determine the effect of these additives on protein integrity and activity. Lecithin in the aqueous phase appeared to increase the fraction of enzyme in monomeric form as well as its activity for both extracted protein and released protein as compared to the other formulations without MgCO3. Incubation of enzyme with PLGA degradation products indicated that the acidic environment within the microspheres aids in the irreversible inactivation of the encapsulated protein. Addition of MgCO3 further increased the amount of monomer in both the extracted and released protein by decreasing the amount of acid-induced cleavage and noncovalent aggregation, but still greatly decreased the activity of the enzyme.

Application of membrane-based dendrimer/DNA complexes for solid phase transfection in vitro and in vivo

In this study a general description of the use of solid support membranes as the device for DNA delivery mediated by PAMAM dendrimers is presented. In contrast to the other DNA carriers, dendrimer/DNA complexes retain the ability to transfect after drying, which enabled coating or incorporation of complexes into poly(DL-lactide-co-glycolide) or collagen-based bioerodable membranes. These studies provide support for the use of this technology for in vitro and in vivo transfection of skin cells. Expression of luciferase or green fluorescent protein from pCF1-Luc and pEGFP1 plasmids indicated that dendrimer/DNA complexes can mediate transfection after dissociation from the solid support and/or when retained on the surface of the membranes. Modification of the membranes by incorporation of an anionic lipid, phosphatidyl glycerol (PG) at 1-5% concentrations, resulted in more efficient in situ transfection, particularly with dendrimer/DNA complexes formed at the low charge ratios (1-5). We also report data supporting the feasibility of membrane-based dendrimer/DNA complexes, particularly formed at lower than neutralizing conditions, for topical in vivo delivery of DNA to hairless mouse skin.

Bacterial inactivation by using near- and supercritical carbon dioxide

The three most common methods of sterilization in use today are ethylene oxide exposure, gamma-irradiation, and steam sterilization. Each of these methods has serious limitations for the sterilization of some materials used in medicine, especially thermally and hydrolytically sensitive polymers by themselves and in combination with proteins. In this work, we demonstrate a potential new method of sterilization by using supercritical fluid carbon dioxide. Using this method we achieve complete inactivation of a wide variety of bacterial organisms at moderate temperatures and in the absence of organic solvents or irradiation. Sterilization is a function of both the proximity to the fluid's critical point and the chemical nature of the fluid itself. When biodegradable polymers poly(lactic-co-glycolic) acid and polylactic acid were included in the sterilization process, there was no effect on the inactivation efficiency, yet no physical or chemical damage to these thermally and hydrolytically labile materials was observed.