Effects of polyelectrolyte complex (PEC) on human periodontal ligament fibroblast (HPLF) function. II. Enhancement of HPLF differentiation and aggregation on PEC by L-ascorbic acid and dexamethasone

Cellular Nanofiber Structure with Secretory Activity-Promoting Characteristics for Multicellular Spheroid Formation and Hair Follicle Regeneration

Multicellular spheroids can mimic the in vivo microenvironment and maintain the unique functions of tissues, which has attracted great attention in tissue engineering. However, the traditional culture microenvironment with structural deficiencies complicates the culture and collection process and tends to lose the function of multicellular spheroids with the increase of cell passage. In order to construct efficient and functional multicellular spheroids, in this study, a chitosan/polyvinyl alcohol nanofiber sponge which has an open-cell cellular structure is obtained. The hair follicle (HF) regeneration model was employed to evaluate HF-inducing ability of dermal papilla (DP) multicellular spheroids which formed on the cellular structure nanofiber sponge. Through structural fine-tuning, the nanofiber sponge has appropriate elasticity for the creation of a three-dimensional dynamic microenvironment to regulate cellular behavior. The cellular structure nanofiber sponge tilts the balance of cell-substratum and cell-cell interactions to a state which is more conducive to the formation of controllable multicellular spheroids in a short time. More importantly, it improves the secretory activity of high-passaged dermal papilla cells and restores their intrinsic properties. Experiments using BALB/c nude mice show that cultured DP multicellular spheroids could effectively enhance HF-inducing ability. This novel system provides a simple and efficient strategy for multicellular spheroid formation and HF regeneration.

Oral Administration of Chitosan Attenuates Bleomycin-induced Pulmonary Fibrosis in Rats

BACKGROUND/AIM

Idiopathic pulmonary fibrosis (PF) is a fatal disorder of unknown aetiology with limited treatment options. Chitosan has antibacterial, antifungal, antioxidant, antitumour, and anti-inflammatory effects. This study aimed to investigate the effects of chitosan administration on bleomycin (BLM)-induced PF in rats.

MATERIALS AND METHODS

A PF rat model was established by endotracheal instillation of 5 mg/kg BLM; then, chitosan was administered in drinking water for 3 weeks. Histology, cell counts, and cytokine responses in the bronchoalveolar lavage fluid (BALF) and weight measurements (body and lung) were analyzed to assess its therapeutic effects.

RESULTS

Chitosan administration tended to reduce transforming growth factor (TGF)-β1 and interferon (IFN)-γ levels in BALF, and histopathological examination confirmed that chitosan attenuated the degree of inflammation and fibrosis in the lung.

CONCLUSION

This study revealed that oral chitosan exhibits potential antifibrotic effects, as measured by decreased proinflammatory cytokine levels and histological evaluation, in a BLM-induced PF rat model.

Biocompatibility of Poly(ε-caprolactone) Scaffold Modified by Chitosan—The Fibroblasts Proliferation in vitro

In this study, the surface of poly("-caprolactone) (PCL) scaffold was modified by chitosan (CS) in order to enhance its cell affinity and biocompatibility. It is demonstrated by scanning electronic microscopy (SEM) that when 0.5-2.0 wt% chitosan solutions are used to modify the PCL scaffold, the amount of adhesion of the fibroblasts on the chitosan-modified PCL scaffolds dramatically increase when compared to the control after 7 days cell culture. The results indicate that the chitosan-modified PCL scaffolds are more favorable for cell proliferation by improving the scaffold biocompatibility. The improvement may be helpful for the extensive applications of PCL scaffold in heart valve and blood vessel tissue engineering.

Chitosan aerosol inhalation alleviates lipopolysaccharide- induced pulmonary fibrosis in rats

PURPOSE

Pulmonary fibrosis (PF) is an insidiously progressive scarring disorder of the alveoli and is associated with high mortality. Currently, therapies available are associated with restricted efficacy and side effects. This study aimed to investigate the effect of chitosan aerosol inhalation on lipopolysaccharide (LPS)-induced pulmonary remodeling and fibrosis in rats.

METHODS

A rat model of PF was established by intratracheal injection of LPS (5 mg/kg). Chitosan was nebulized to rats from day 4 to 28 after LPS injection. We analyzed the effect of chitosan on LPS-induced pulmonary remodeling and fibrosis by hematoxylin-eosin staining (HE), Masson staining, and the determination of the hydroxyproline content. The expression intensities of matrix metalloproteinase-3 (MMP-3) and tissue inhibitor of metalloproteinase-1 (TIMP-1) were analyzed by western blots.

RESULTS

Histological assessments showed that chitosan aerosol inhalation attenuated the fibrotic changes in LPS-induced PF in rats. Compared with the LPS group, the fibrosis parameters were significantly improved in the LPS + chitosan group (LCh group), although not as good as those of the control group. The expressions of MMP-3 and TIMP-1 in the LCh group were markedly less than that of the LPS group on the 28th day.

CONCLUSIONS

Our findings show that chitosan aerosol inhalation inhibits the expression of MMP-3 and TIMP-1, and ameliorates LPS-induced pulmonary remodeling and fibrosis in rats.

Scalable production of controllable dermal papilla spheroids on PVA surfaces and the effects of spheroid size on hair follicle regeneration

Organ size and numbers are vital issues in bioengineering for hair follicle (HF) regeneration. Murine HF dermal papilla (DP) cells are able to induce HF neogenesis when transplanted as aggregates. However, how the preparation of murine and human DP aggregates affects HF inductivity and the size of regenerated HF is yet to be determined. Here we report a scalable method for production of controllable human and rat DP spheroids in general labs for reproducible experiments. Compared with more hydrophobic polyethylene and poly(ethylene-co-vinyl alcohol), DP cells are poorly adhesive to hydrophilic polyvinyl alcohol (PVA). Seeded in PVA-coated 96-welled commercial PCR tube arrays, DP cells quickly aggregate into single spheroids with progressive compaction. Varying seeded cell numbers and culture periods enables us to control the size and cell number of the spheroids. The spheroids obtained have high viability and preserve DP characters. A proof of principle experiment was conducted to examine the size effect on the efficiency and efficacy of HF regeneration. We found that both human and rat DP spheroids are able to induce HF neogenesis and larger DP spheroids exhibit higher HF inductivity. However, the average diameter of regenerated hair fiber did not significantly change with the increasing size of transplanted DP spheroids. The result suggests that an appropriate size of DP spheroid is essential for HF inductivity, but its size cannot be directly translated to a thicker regenerated hair. Our results also have implications on the efficiency and efficacy in the regeneration of other epithelial organs.

Endothelial Cell and Platelet Behavior on Titanium Modified with a Mutilayer of Polyelectrolytes

Endothelial cell seeding, a promising method for improving the performance of vascular grafts, often requires immobilizing biological molecules on the surface of the substrate material. In this study, chitosan (CS) and sulfated chitosan (SCS) multilayers were coated on pure titanium using a layer-by-layer self-assembly technique. The CS—SCS multilayer growth was carried out by first depositing a single layer of positively charged poly(L-lysine) (PLL) on the NaOHtreated titanium substrate, followed by alternate deposition of negatively charged SCS and positively charged CS, and terminated by an outermost layer of SCS. Platelet-rich plasma (PRP) and endothelial cells were seeded on NaOH treated titanium and CS—SCS coated titanium samples, respectively, to evaluate the adhesion and activation of platelets and the behavior of endothelial cells in vitro. The multilayer processed surfaces displayed reduced platelet adhesion and activation, and promoted endothelial cell attachment and growth in vitro. This approach may be used for the fabrication of titanium-based vascular implant surfaces for endothelial promotion.

Bioactivity of a Novel Nano— composite of Hydroxyapatite and Chitosan—Phosphorylated Chitosan Polyelectrolyte Complex

The bioactivity of a novel composite of carbonate-containing low-crystallinity nanoparticle hydroxyapatite (HA) and a chitosan—phosphorylated chitosan polyelectrolyte complex (PEC) was evaluated in vitro and in vivo. The HA—PEC nanocomposite with complicated porous structure was prepared by a biomimetic method. An acidic chitosan (polycation) solution containing calcium and phosphate ions (6 mM Ca2+, Ca/P: 1.67) was added into phosphorylated chitosan (polyanion) solution; the formation of PEC and the controlled HA crystal growth were co-organized in alkaline solution. The material was co-cultured with rat osteoblasts in vitro, and implanted into rabbit femur marrow cavities. The results indicate that the PEC—HA composite promoted osteoblast adhesion, morphology, proliferation, and differentiation in vitro; the bone tissue response to the material histologically showed that it was bioactive, as well as biodegradable. The HA—PEC composite shows promise as a bone-repair material.

Chitosan-phosphorylated chitosan polyelectrolyte complex hydrogel as an osteoblast carrier

To simulate extra-cellular matrix, a novel three-dimensional scaffold of polyelectrolyte complex (PEC) hydrogel as an osteoblast carrier was synthesized. First, chitosan, a natural glycosaminoglycan, was modified by phosphorylation to obtain a water-soluble phosphorylated chitosan (P-content: 10.7 mass%). The PEC hydrogel was then formed from equal volumes of 0.173 mass% phosphorylated chitosan in water and 1 mass% chitosan in 1% (V/V) acetic acid solution. Rat osteoblasts were seeded in the hydrogel. The PEC hydrogel had a three-dimensional hierarchically-porous structure and good cytobiocompatibility for osteoblasts in vitro. It is concluded that the PEC hydrogel is a promising material as an osteoblast carrier.

The response of normal human osteoblasts to anionic polysaccharide polyelectrolyte complexes

Polyelectrolyte complexes (PEC) were prepared from chitosan as the polycation and several synthesized functional anion polysaccharides, and their effects on cell attachment, morphology, proliferation and differentiation were estimated using normal human osteoblasts (NHOst). After a 1-week incubation, PEC made from polysaccharides having carboxyl groups as polyanions showed low viability of NHOst on it although the NHOst on it showed an enhancement in their differentiation level. On the other hand, NHOst on PEC made from sulfated or phosphated polysaccharides showed similar attachment and morphology to those on the collagen-coated dish. When the number of NHOst was estimated after 1 week, the number on the PEC was ranged from 70% to 130% of those on the collagen-coated dish, indicating few effects of these PEC on cell proliferation. In addition, NHOst on PEC films made from sulfated polysaccharides differentiated to a level very similar to that observed on the collagen-coated dish, indicating that these PEC films maintain the normal potential of NHOst to both proliferate and differentiate. Measurement of gap junctional intercellular communication of NHOst on PEC revealed that PEC did not inhibit communication, suggesting that PEC films have few effects on cell homeostasis. Thus, PEC made from the sulfated polysaccharide may be a useful material as a new scaffold for bone regeneration.

Structure and interactions in chitosan hydrogels formed by complexation or aggregation for biomedical applications

The aim of this review was to provide a detailed overview of physical chitosan hydrogels and related networks formed by aggregation or complexation, which are intended for biomedical applications. The structural basis of these systems is discussed with particular emphasis on the network-forming interactions, the principles governing their formation and their physicochemical properties. An earlier review discussing crosslinked chitosan hydrogels highlighted the potential negative influence on biocompatibility of covalent crosslinkers and emphasised the need for alternative hydrogel systems. A possible means to avoid the use of covalent crosslinkers is to prepare physical chitosan hydrogels by direct interactions between polymeric chains, i.e. by complexation, e.g. polyelectrolyte complexes (PEC) and chitosan/poly (vinyl alcohol) (PVA) complexes, or by aggregation, e.g. grafted chitosan hydrogels. PEC exhibit a higher swelling sensitivity towards pH changes compared to covalently crosslinked chitosan hydrogels, which extends their potential application. Certain complexed polymers, such as glycosaminoglycans, can exhibit interesting intrinsic properties. Since PEC are formed by non-permanent networks, dissolution can occur. Chitosan/PVA complexes represent an interesting alternative for preparing biocompatible drug delivery systems if pH-controlled release is n/ot required. Grafted chitosan hydrogels are more complex to prepare and do not always improve biocompatibility compared to covalently crosslinked hydrogels, but can enhance certain intrinsic properties of chitosan such as bacteriostatic and wound-healing activity.

Viability, adhesion, and bone phenotype of osteoblast-like cells on polyelectrolyte multilayer films

The aim of this study was to develop new biocompatible coatings for bone implants by the alternating deposition of oppositely charged polyelectrolytes. Polyelectrolyte films were built up with different terminating layers on which SaOS-2 osteoblast-like cells and human periodontal ligament (PDL) cells were grown. The terminating layer was made of one of the following polyelectrolytes: poly(ethylene imine) (PEI), poly(sodium 4-styrenesulfonate) (PSS), poly(allylamine hydrochloride) (PAH), poly(L-glutamic acid) (PGA), or poly(L-lysine) (PLL). Cell adherence, viability, stability of osteoblast phenotype, and inflammatory response were studied. Adherence and viability were good on all terminating layers except the PEI-terminating layer, which was cytotoxic. Maintenance of osteoblast phenotype marker expression was observed on PSS- and PGA-terminating films for both cell types, whereas downregulation, associated with the induction of Interleukin-8 (IL-8) secretion, was detected on PEI and PAH for both cell types and on PLL for PDL cells. These results suggested a good biocompatibility of PSS- and PGA-ending films for PDL cells and of PSS-, PGA-, and PLL-terminating films for SaOS-2 cells. As a result, polyelectrolyte multilayer films could emerge as new alternatives for implant coatings.

Surface modification of poly (D,L-lactic acid) with chitosan and its effects on the culture of osteoblasts in vitro

Chitosan is a good biodegradable natural polymer, widely used in biomedical fields. In this study, chitosan was used to modify the surface of poly (D,L-lactic acid) (PDLLA) in order to enhance its cell affinity. The properties of a modified PDLLA surface and control were investigated by contact angle and electron spectroscopy for chemical analysis (ESCA), which indicated the changes in surface energy and chemical structure. Scanning electron microscopy (SEM) observation displayed differences in surface morphology between the chitosan-modified film and the control. These data reflected that PDLLA films could be modified with chitosan and in turn may affect the biocompatibility of the modified films. Therefore, adhesion and growth of osteoblasts on modified PDLLA films as well as control were studied. Cell morphologies on the films were examined by SEM and cell viability was evaluated using an MTT assay; the differentiated cell function was assessed by measuring alkaline phosphatase (ALP) activity. The ALP activity of modified PDLLA films was significantly higher than that found on the control (p < 0.01). The proliferation of osteoblasts on modified films was also found to be higher than that on the control (p < 0.05), suggesting that chitosan could be used to modify PDLLA and then enhance its cell biocompatibility.

Application of chitosan-based polysaccharide biomaterials in cartilage tissue engineering: a review

Once damaged, articular cartilage has very little capacity for spontaneous healing because of the avascular nature of the tissue. Although many repair techniques have been proposed over the past four decades, none has sucessfully regenerated long-lasting hyaline cartilage tissue to replace damaged cartilage. Tissue engineering approaches, such as transplantation of isolated chondrocytes, have recently demonstrated tremendous clinical potential for regeneration of hyaline-like cartilage tissue and treatment of chondral lesions. As such a new approach emerges, new important questions arise. One of such questions is: what kinds of biomaterials can be used with chondrocytes to tissue-engineer articular cartilage? The success of chondrocyte transplantation and/or the quality of neocartilage formation strongly depend on the specific cell-carrier material. The present article reviews some of those biomaterials, which have been suggested to promote chondrogenesis and to have potentials for tissue engineering of articular cartilage. A new biomaterial, a chitosan-based polysaccharide hydrogel, is also introduced and discussed in terms of the biocompatibility with chondrocytes.