Effects of new machinable ceramic on behavior of rat bone cells cultured in vitro

The in vitro degradation process and biocompatibility of a ZK60 magnesium alloy with a forsterite-containing micro-arc oxidation coating

Magnesium has attracted much attention as a class of biodegradable metallic biomaterials. In this study, a silicate electrolyte-based micro-arc oxidation (MAO) treatment was adopted to prepare forsterite-containing MAO coatings on a ZK60 magnesium alloy in order to decrease the degradation rate and increase the biological property of the alloy. Four anodization voltages were chosen to prepare the MAO coatings. The cell experiment showed a cytotoxicity of grade 0 for the MAO-coated alloy to L929 cells and the hemolytic ratio was dramatically decreased for the MAO-coated alloy compared with the bare one. The corrosion resistance and the degradation behavior of the MAO-coated ZK60 alloy were studied using drop tests, electrochemical measurements and immersion tests. The results indicate that the MAO coating could effectively decrease the initial degradation rate of the alloy. The corrosion resistance of MAO coating was increased with the elevation of the preparation voltage. A degradation model for ZK60 alloy with a forsterite-containing MAO coating was proposed. Based on the model, the MAO-coated alloy experiences destruction and restoration simultaneously, and the coating fails in a peeling-off mode.

Interaction between topography and coating in the formation of bone nodules in culture for hydroxyapatite- and titanium-coated micromachined surfaces

Rat osteoblast cultures were maintained from 24 h to 6 weeks on hydroxyapatite (HA)- or titanium (Ti)-coated smooth and micromachined grooved substrata in medium supplemented with L-ascorbic acid-2-phosphate and beta-glycerophosphate to promote mineralization. The HA coatings, approximately 1 microm thick, were characterized using X-ray diffraction, surface roughness, and scanning electron microscopy (SEM). Osteoblasts elongated, aligned, and moved in the direction of the grooves on both Ti and HA grooved surfaces. HA surfaces produced significantly more bone-like nodules than Ti surfaces. All grooved substrata produced significantly more nodules than smooth surfaces. These results are consistent with the hypothesis that substrata can increase osteogenesis by formation of an appropriate microenvironment. There was also a statistically significant interaction between topography and chemistry in the formation of mineralized nodules. A strong correlation (r = 0.958) between alkaline phosphatase (Alk-P) at 2 weeks and nodule counts at 6 weeks was observed, suggesting that Alk-P may possibly be used as a leading indicator of osteogenesis on microfabricated surfaces. The results of this study indicate that surface topography and chemistry can affect osteogenesis, and that interactions between chemistry and topography can occur.

An image analysis method for the study of cell adhesion to biomaterials

This fluorescence image analysis method for the quantitative determination of cell adhesion on biomaterials allows bone cells labelled with propidium iodide to be counted automatically, directly on their support. The reliability of the estimation by fluorescence image analysis was validated by comparison with visual counting and with results obtained by an electronic particle counter. In this way it was possible to demonstrate that the adhesive properties of bone cells are dependent on the type of substrate--enstatite (MgO, SiO2, CaO-P2O5-Al2O3), Thermanox (modified polyethyleneterephthalate), or glass. In contrast, the spread of the cell cytoplasm, labelled with fluorescein isothiocyanate and measured by image analysis, does not vary significantly according to the substrate. The characterisation by SKIZ tessellation of the spatial cell arrangement shows that the bone cells have a random organisation on Thermanox and glass, whereas they form aggregates on enstatite.