Fluid flow-induced tyrosine phosphorylation and participation of growth factor signaling pathway in osteoblast-like cells

The effect of sinusoidal AC electric stimulation of 3D PCL/CNT and PCL/β-TCP based bio-composites on cellular activities for bone tissue regeneration

Various physical stimulations have been widely applied to tissue regenerative applications. In particular, for bone tissue regeneration, several experimental studies have reported that electric stimulation can enhance the mineral formation in cultured osteoblasts and even alter the pattern of gene expression, promoting bone tissue formation. However, to date, for rapid-prototyped polycaprolactone (PCL)-based composites of pure PCL and dispersed materials including carbon nanotubes and β-tricalcium phosphate (TCP), the effect of electric stimulation on various cellular activities has not been analyzed. Here, a sinusoidal AC electric field (55 ± 8 mV cm^-1 and 60 Hz) between parallel electrodes was applied to three-dimensional scaffolds (pure PCL, PCL/CNT-0.2 wt%, and PCL/β-TCP-20 wt%) cultured with osteoblast-like cells (MG63) 30 min per day for 14 days. When exposed to electric stimulation, alkaline phosphatase and calcium mineralization were enhanced in all scaffolds, and the PCL/β-TCP scaffold in particular showed the highest improvement in bone mineralization compared with other scaffolds. In this work, we surmised that the improvement may have been due to chemical precipitation of the calcium ions from the PCL/β-TCP scaffolds. To evaluate the effect of the released calcium ions from the composite scaffold, we observed the cellular behavior (cellular contraction) of proliferated cells under electric stimulation. The results indicate that in addition to the applied electric field conditions, the scaffold materials are also an important parameter for successful electric stimulation.

Egr-1 mRNA induction by medium flow involves mRNA stabilization and is enhanced by the p38 inhibitor SB203580 in osteoblast-like cells

AIM

Mechanical stimuli are important for maintaining organ structure and tissue function. To elucidate signalling pathways activated by mechanical stimuli, the contribution of mRNA stabilization to induction of egr-1 mRNA by medium flow was examined and the mechanisms responsible for stabilization were analysed. An early-response gene that encodes a transcription factor, egr-1, activates transcription of several genes in response to mechanical stimuli, and was therefore selected to resolve how early-induced signals are integrated and connected to subsequent response.

METHODS

Mouse osteoblast-like MC3T3E1 cells were stably transfected with the chloramphenicol acetyltransferase (CAT) gene linked to the egr-1 promoter, and inductions of endogenous egr-1 and transfected CAT mRNA following medium flow were compared using real-time reverse transcriptase PCR. The mechanism of induction was examined using a transcription inhibitor and mitogen-activated protein (MAP) kinase inhibitors. Activation of MAP kinases by medium flow was investigated using western blotting.

RESULTS

Induction of egr-1 mRNA by medium flow was twofold higher than CAT mRNA induction. Induction of egr-1 mRNA was also observed in cells pre-treated with transcription inhibitor. The p38 inhibitor SB203580 enhanced induction of egr-1 mRNA by medium flow. Extracellular signal regulated kinase (ERK), p38 and c-Jun N-terminal kinase (JNK) were activated by medium flow.

CONCLUSION

A considerable part of egr-1 mRNA induction by medium flow may be due to mRNA stabilization. The p38 inhibitor SB203580 enhances induction.

Use of bioreactors in maxillofacial tissue engineering

Engineering of various oral tissues is a challenging issue in contemporary maxillofacial reconstructive research. In contrast to the classic biomaterial approach, tissue engineering is based on the understanding of cell driven tissue formation, and aims to generate new functional tissues, rather than just to implant non-living space holders. Researchers hope to reach this goal by combining knowledge from biology, physics, materials science, engineering, and medicine in an integrated manner. Several major technical advances have been made in this field during the last decade, and clinical application is at the stage of first clinical trials. A recent limitation of extracorporally engineered cellular substitutes is the problem of growing enlarged tissues ex vivo. One of the main research topics is therefore to scale up artificial tissue constructs for use in extended defect situations. To overcome the monolayer inherent two-dimensional cell assembly, efforts have been made to grow cells in a three-dimensional space. Bioreactors have therefore been in focus for a considerable time to build up enlarged tissues. The shift from the ex vivo approach of cell multiplication to the generation of a real tissue growth is mirrored by the development of bioreactors, enabling scientists to grow more complex tissue constructs. This present review intends to provide an overview of the current state of art in maxillofacial tissue engineering by the use of bioreactors, its limitations and hopes, as well as the future research trends.

Membrane type-1 matrix metalloproteinase is induced following cyclic compression of in vitro grown bovine chondrocytes

OBJECTIVE

To determine if membrane type-1 matrix metalloproteinase (MT1-MMP) will respond to cyclic compression of chondrocytes grown in vitro and the regulatory mechanisms underlying this response.

METHODS

Cyclic compression (30min, 1kPa, 1Hz) was applied to bovine chondrocytes (6-9-month-old animals) grown on top of a biodegradable substrate within 3 days of initiating culture. Luciferase assays using bovine articular chondrocytes were undertaken to demonstrate the mechanosensitivity of MT1-MMP. Semi-quantitative reverse-transcription polymerase chain reaction (RT-PCR) and western blot analysis were used to establish the time course of gene and protein upregulation in response to cyclic compression. The regulation of MT1-MMP was assessed by electrophoretic mobility shift assays, RT-PCR and western blot analysis. As well, an MT1-MMP decoy oligonucleotide and an extracellular signal-regulated kinase 1/2 (ERK1/2) pharmacological inhibitor were utilized to further characterize MT1-MMP regulation.

RESULTS

After cyclic compression, MT1-MMP showed a rapid and transient increase in gene expression. Elevated protein levels were detected within 2h of stimulation which returned to baseline by 6h. During cyclic compression, phosphorylation of the mitogen activated protein kinase ERK1/2 increased significantly. This was followed by increased gene and protein expression of the transcription factor; early growth factor-1 (Egr-1) and Egr-1 binding to the MT1-MMP promoter. Blocking Egr-1 DNA binding with a decoy MT1-MMP oligonucleotide, downregulated MT1-MMP gene expression. The ERK1/2 inhibitor U0126 also reduced Egr-1 DNA binding activity to MT1-MMP promoter sequences and subsequent transcription of MT1-MMP.

CONCLUSIONS

These data suggest that cyclic compression of chondrocytes in vitro upregulates MT1-MMP via ERK1/2 dependent activation of Egr-1 binding. Delineation of the regulatory pathways activated by mechanical stimulation will further our understating of the mechanisms influencing tissue remodeling.

Osteopontin is associated with nuclear factor κB gene expression during tail-suspension-induced bone loss

Osteoporosis due to unloading-induced bone loss is a critical issue in the modern aging society. Although the mechanisms underlying this phenomenon are largely unknown, osteopontin (OPN) is one of the critical mediators required for unloading-induced bone loss [M. Ishijima, S.R. Rittling, T. Yamashita, K. Tsuji, H. Kurosawa, A. Nifuji, D.T. Denhardt, and M. Noda, Enhancement of osteoclastic bone resorption and suppression of osteoblastic bone formation in response to reduced mechanical stress do not occur in the absence of osteopontin, J Exp Med, 193 (2001) 399-404]. To clarify the molecular bases for OPN actions, we carried out microarray analyses on the genes expressed in the femoral bone marrow cells in wild type and OPN-/- mice. The removal of the mechanical load induced bone loss in wild type, but not in OPN-/- mice, as previously reported. Expression analysis of 9586 cDNAs on a microarray system revealed that OPN deficiency blocked tail-suspension-induced expression of ten genes (group A). This observation was confirmed based on semi-quantitative RT-PCR analyses. On the other hand, expression of four genes (group B) was not altered by tail suspension in wild type but was enhanced in OPN-deficient mice. NF-kappaB p105 subunit gene (Nfkb1) was found in group A and Bax in group B. p53 gene expression was upregulated by tail suspension in wild type mice, but it was no longer observed in OPN-/- mice. These data indicate that OPN acts to mediate mechanical stress signaling upstream to the genes encoding apoptosis-related molecules, and its action is associated with alteration of the genes.

MAP kinase and calcium signaling mediate fluid flow-induced human mesenchymal stem cell proliferation

Mechanical signals are important regulators of skeletal homeostasis, and strain-induced oscillatory fluid flow is a potent mechanical stimulus. Although the mechanisms by which osteoblasts and osteocytes respond to fluid flow are being elucidated, little is known about the mechanisms by which bone marrow-derived mesenchymal stem cells respond to such stimuli. Here we show that the intracellular signaling cascades activated in human mesenchymal stem cells by fluid flow are similar to those activated in osteoblastic cells. Oscillatory fluid flow inducing shear stresses of 5, 10, and 20 dyn/cm(2) triggered rapid, flow rate-dependent increases in intracellular calcium that pharmacological studies suggest are inositol trisphosphate mediated. The application of fluid flow also induced the phosphorylation of extracellular signal-regulated kinase-1 and -2 as well as the activation of the calcium-sensitive protein phosphatase calcineurin in mesenchymal stem cells. Activation of these signaling pathways combined to induce a robust increase in cellular proliferation. These data suggest that mechanically induced fluid flow regulates not only osteoblastic behavior but also that of mesenchymal precursors, implying that the observed osteogenic response to mechanical loading may be mediated by alterations in the cellular behavior of multiple members of the osteoblast lineage, perhaps by a common signaling pathway.

Osteoblast Elastic Modulus Measured by Atomic Force Microscopy Is Substrate Dependent

The actin and microtubule cytoskeleton have been found to contribute to the elastic modulus of cells, which may be modulated by adhesion to extracellular matrix (ECM) proteins and subsequent alterations in the cytoskeleton. In this study, the apparent elastic modulus (Eapp) of osteoblast-like MC3T3-E1 cells adhered to fibronectin (FN), vitronectin (VN), type I collagen (COLI), fetal bovine serum (FBS), or poly-l-lysine (PLL), and bare glass were determined using an atomic force microscope (AFM). The E(app) of osteoblasts adhered to ECM proteins (FN, VN, COLI, and FBS) that bind cells via integrins were higher compared to cells on glass and PLL, which adhere cells through nonspecific binding. Also, osteoblasts adhered to FN, VN, COLI, and FBS had F-actin stress fiber formation, while osteoblasts on glass and PLL showed few F-actin fibers. Disruption of the actin cytoskeleton decreased E(app) of osteoblasts plated on FN to the level of osteoblasts plated on glass, while microtubule disruption had no significant effect. This suggests that the elevated modulus of osteoblasts adhered to FN was due to remodeling of the actin cytoskeleton upon adhesion to ECM proteins. Modulation of cell stiffness upon adhesion to various substrates may influence mechanosignal transduction in osteoblasts.

Biological and biophysical principles in extracorporal bone tissue engineering

The aim of this review is to characterise the biological and biophysical background of in vitro bone tissue engineering. The paper focuses on basic principles in extracorporal engineering of bone-like tissues, considering parameters such as scaffold design, tissue construction, bioreactors, and cell stimulation in vivo and in vitro. Scaffolds have a key function concerning cellular invasion and bone formation. The intra-architectural scaffold geometry, as well as the scaffold material, play an important role in the process of bone regeneration. Various types of bioreactors have been tested for their utility in bone substitute fabrication that is clinically effective and reproducible. Sophisticated bioreactor systems are those that mimic the three-dimensional morphology and the mechanical situation of bones. Mechanical stimulation as well as other biophysical stimuli appear to be critical factors for proliferation and differentiation of bone cells and for bone mineral and structure formation. Furthermore an enhancement of bone regeneration by application of chemical stimulation factors is discussed.

Signal transduction and mechanical stress

Bone undergoes a constant process of remodeling in which mass is retained or lost in response to the relative activity of osteoblasts and osteoclasts. Weight-bearing exercise-which is critical for retaining skeletal integrity-promotes osteoblast function, whereas a lack of mechanical stimulation, as seen during spaceflight or prolonged bed rest, can lead to osteoporosis. Thus, understanding mechanotransduction at the cellular level is key to understanding basic bone biology and devising new treatments for osteoporosis. Various mechanical stimuli have been studied as in vitro model systems and have been shown to act through numerous signaling pathways to promote osteoblast activity. Here, we examine the various types of stress and the sequential response of transduction pathways that result in changes in gene expression and the ensuing proliferation of osteoblasts.

Mechanical strain on osteoblasts activates autophosphorylation of focal adhesion kinase and proline-rich tyrosine kinase 2 tyrosine sites involved in ERK activation

The mechanisms involved in the mechanical loading-induced increase in bone formation remain unclear. In this study, we showed that cyclic strain (CS) (10 min, 1% stretch at 0.25 Hz) stimulated the proliferation of overnight serum-starved ROS 17/2.8 osteoblast-like cells plated on type I collagen-coated silicone membranes. This increase was blocked by MEK inhibitor PD-98059. Signaling events were then assessed 0 min, 30 min, and 4 h after one CS period with Western blotting and coimmunoprecipitation. CS rapidly and time-dependently promoted phosphorylation of both ERK2 at Tyr-187 and focal adhesion kinase (FAK) at Tyr-397 and Tyr-925, leading to the activation of the Ras/Raf/MEK pathway. Cell transfection with FAK mutated at Tyr-397 completely blocked ERK2 Tyr-187 phosphorylation. Quantitative immunofluorescence analysis of phosphotyrosine residues showed an increase in focal adhesion plaque number and size in strained cells. CS also induced both Src-Tyr-418 phosphorylation and Src to FAK association. Treatment with the selective Src family kinase inhibitor pyrazolopyrimidine 2 did not prevent CS-induced FAK-Tyr-397 phosphorylation suggesting a Src-independent activation of FAK. CS also activated proline-rich tyrosine kinase 2 (PYK2), a tyrosine kinase highly homologous to FAK, at the 402 phosphorylation site and promoted its association to FAK in a time-dependent manner. Mutation of PYK2 at the Tyr-402 site prevented the ERK2 phosphorylation only at 4 h. Intra and extracellular calcium chelators prevented PYK2 activation only at 4 h. In summary, our data showed that osteoblast response to mitogenic CS was mediated by MEK pathway activation. The latter was induced by ERK2 phosphorylation under the control of FAK and PYK2 phosphorylation orchestrated in a time-dependent manner.

Increase in epidermal growth factor receptor protein induced in osteoblastic cells after exposure to flow of culture media

To investigate how bone cells respond to mechanical stimuli, we subjected osteoblastic cells to fluid flow. We and others already reported that in a culture system of osteoblast-like cells, ERK1/2, Shc, and other proteins were tyrosine-phosphorylated by medium flow and the early response gene, egr-1 or c-fos mRNA, increased. These are the same as events found after stimulation by various growth factors. Moreover, because there were also reports suggesting that growth factor signaling is involved in the responses to mechanical stimuli, we examined the change in epidermal growth factor (EGF) receptor in the cells exposed to medium flow. The results demonstrated that EGF receptor protein increased after exposure to medium flow. This increase did not occur without serum in media, and the addition of EGF restored it. Furthermore, leupeptin blocked this increase. These results suggest that degradation of EGF-occupied EGF receptor by leupeptin-sensitive protease(s) in endosomes decreased with exposure to medium flow. This was presumed to participate, at least in part, in signaling of fluid flow.

ERK activation and alpha v beta 3 integrin signaling through Shc recruitment in response to mechanical stimulation in human osteoblasts

Osteoblast growth and differentiation are critical processes for bone development and maintenance, and are regulated by both humoral and mechanical factors. Humoral (hormonal) factors can affect gene transcription via MAPkinases, e.g., extracellular signal-regulated kinase (ERK). We studied whether the ERK pathway is also involved in processing mechanical inputs in human bone cells. Exposing MG63 cells to physiologically relevant levels of fluid flow resulted in ERK phosphorylation. Genistein blocked this response, indicating that it is dependent on tyrosine phosphorylation. Furthermore, alpha v beta 3 integrins were activated in response to fluid flow, as shown by recruitment of adaptor molecule Shc and clustering of alpha v beta 3 in focal adhesion-like structures. Antibodies blocking formation of beta 1 or beta 3 integrin-matrix interactions or RGD peptides could not inhibit fluid flow-induced ERK phosphorylation, suggesting that formation of new integrin-matrix interactions is not essential for this response and that other upstream mechanosensors regulate induction of ERK phosphorylation in response to fluid flow in human bone cells.

Formation of three-dimensional cell/polymer constructs for bone tissue engineering in a spinner flask and a rotating wall vessel bioreactor

The aim of this study is to investigate the effect of the cell culture conditions of three-dimensional polymer scaffolds seeded with rat marrow stromal cells (MSCs) cultured in different bioreactors concerning the ability of these cells to proliferate, differentiate towards the osteoblastic lineage, and generate mineralized extracellular matrix. MSCs harvested from male Sprague-Dawley rats were culture expanded, seeded on three-dimensional porous 75:25 poly(D,L-lactic-co-glycolic acid) biodegradable scaffolds, and cultured for 21 days under static conditions or in two model bioreactors (a spinner flask and a rotating wall vessel) that enhance mixing of the media and provide better nutrient transport to the seeded cells. The spinner flask culture demonstrated a 60% enhanced proliferation at the end of the first week when compared to static culture. On day 14, all cell/polymer constructs exhibited their maximum alkaline phosphatase activity (AP). Cell/polymer constructs cultured in the spinner flask had 2.4 times higher AP activity than constructs cultured under static conditions on day 14. The total osteocalcin (OC) secretion in the spinner flask culture was 3.5 times higher than the static culture, with a peak OC secretion occurring on day 18. No considerable AP activity and OC secretion were detected in the rotating wall vessel culture throughout the 21-day culture period. The spinner flask culture had the highest calcium content at day 14. On day 21, the calcium deposition in the spinner flask culture was 6.6 times higher than the static cultured constructs and over 30 times higher than the rotating wall vessel culture. Histological sections showed concentration of cells and mineralization at the exterior of the foams at day 21. This phenomenon may arise from the potential existence of nutrient concentration gradients at the interior of the scaffolds. The better mixing provided in the spinner flask, external to the outer surface of the scaffolds, may explain the accelerated proliferation and differentiation of marrow stromal osteoblasts, and the localization of the enhanced mineralization on the external surface of the scaffolds.

Biomaterials and bone mechanotransduction

Bone is an extremely complex tissue that provides many essential functions in the body. Bone tissue engineering holds great promise in providing strategies that will result in complete regeneration of bone and restoration of its function. Currently, such strategies include the transplantation of highly porous scaffolds seeded with cells. Prior to transplantation the seeded cells are cultured in vitro in order for the cells to proliferate, differentiate and generate extracellular matrix. Factors that can affect cellular function include the cell-biomaterial interaction, as well as the biochemical and the mechanical environment. To optimize culture conditions, good understanding of these parameters is necessary. The new developments in bone biology, bone cell mechanotransduction, and cell-surface interactions are reviewed here to demonstrate that bone mechanotransduction is strongly influenced by the biomaterial properties.