Nonclassical Potentiometric Indicator Electrodes with Dual Sensitivity

Developments in the Field of Conducting and Non-conducting Polymer Based Potentiometric Membrane Sensors for Ions Over the Past Decade

Many research studies have been conducted on the use of conjugated polymers in the construction of chemical sensors including potentiometric, conductometric and amperometric sensors or biosensors over the last decade. The induction of conductivity on conjugated polymers by treating them with suitable oxidizing agents won Heeger, MacDiarmid and Shirakawa the 2000 Nobel Prize in Chemistry. Common conjugated polymers are poly(acetylene)s, poly(pyrrole)s, poly(thiophene)s, poly(terthiophene)s, poly(aniline)s, poly(fluorine)s, poly(3-alkylthiophene)s, polytetrathiafulvalenes, polynapthalenes, poly(p-phenylene sulfide), poly(p-phenylenevinylene)s, poly(3,4-ethylenedioxythiophene), polyparaphenylene, polyazulene, polyparaphenylene sulfide, polycarbazole and polydiaminonaphthalene. More than 60 sensors for inorganic cations and anions with different characteristics based on conducting polymers have been reported. There have also been reports on the application of non-conducting polymers (nCPs), i.e. PVC, in the construction of potentiometric membrane sensors for determination of more than 60 inorganic cations and anions. However, the leakage of ionophores from the membranes based on these polymers leads to relatively lower life times. In this article, we try to give an overview of Solid-Contact ISE (SCISE), Single-Piece ISE (SPISE), Conducting Polymer (CP)-Based, and also non-conducting polymer PVC-based ISEs for various ions which their difference is in the way of the polymer used with selective membrane. In SCISEs and SPISEs, the plasticized PVC containing the ionophore and ionic additives govern the selectivity behavior of the electrode and the conducting polymer is responsible of ion-to-electron transducer. However, in CPISEs, the conducting polymer layer is doped with a suitable ionophore which enhances the ion selectivity of the CP while its redox response has to be suppressed.

Galvanic cell without liquid junction for potentiometric determination of copper

This paper describes potentiometric measurements in an integrated galvanic cell with both indicator and reference electrodes. Both electrodes are conducting polymer-based. The copper-sensitive indicator electrode is made by using poly(3,4-ethylenedioxythiophene) (PEDOT) doped with 2-(o-arsenophenylazo)-1,8-dihydroxynaphthalene-3,6-disulphonic sodium salt (Arsenazo-I) as the electroactive substance in the film, while the reference electrode is based on PEDOT doped by 2-morpholineoethanesulfonic acid (MES). It is shown that the galvanic cell can be used for determination of copper both in non-aqueous media (where all PVC-based membranes failed) and in the presence of chloride ions, which disturb the signal of conventional copper ion-selective electrodes with solid-state membranes. It is further shown that the titration of copper ions can be successfully monitored using the described electrochemical cell.

Biosensing and drug delivery by polypyrrole

Conducting polypyrrole is a biological compatible polymer matrix wherein number of drugs and enzymes can be incorporated by way of doping. The polypyrrole, which is obtained as freestanding film by electrochemical polymerization, has gained tremendous recognition as sophisticated electronic measuring device in the field of sensors and drug delivery. In drug delivery the reversing of the potential 100% of the drug can be released and is highly efficient as a biosensor in presence of an enzyme. In this review we discuss the applications of conducting polypyrrole as biosensor for some biomolecules and drug delivery systems.

Junction-less reference electrode for potentiometric measurements obtained by buffering pH in a conducting polymer matrix

A reference electrode for potentiometric measurements based on conducting polymers (CP) doped with pH buffering ligands is described. Both the CPs and doping ligands are selected and adjusted in such a way that possible ionic and redox sensitivity is hampered, while the pH buffering property of the CP film is exposed. In this way, the electric potential drop at the conducting polymer|solution interface is stabilized and close to constant over a certain pH range. The electrode behaves as a pseudo-reference electrode in amphiprotic solvents or their mixtures, e.g. water-alcohol mixtures. For the first time titration of sulfates with lead(ii) in water-methanol solution using two "plastic" electrodes, CP-based Pb(2+)-sensitive indicator and CP-based reference electrode, is shown. Because the electrode is junction-less it may easily be miniaturized and maintained and thus may serve in frontier applications of sensors.

Redox Titration of Antioxidant Mixtures with N-Bromosuccinimide as Titrant: Analysis by Non-Linear Least-Squares with Novel Weighting Function

Equations are presented by which potential-volume data from redox titrations can be analyzed. Mixtures of analytes as well as of titrants may be analyzed, yielding for each component its concentration, number of electrons, and reduction potential. A novel weighting function ensures endpoint accuracy in fitting. Standard deviation of each parameter is obtained. The equations can be readily implemented in Microsoft Excel. Agreement with true values and good precision of fit parameters is demonstrated for a number of test cases. Use of these exact equations enables analysis of analyte mixtures without prior separation using single titrant or titrant mixtures. The equations were used to demonstrate that N-bromosuccinimide, a useful oxidant for organic analytes, undergoes hydrolysis.