Modified Thick-Film Graphite Electrodes: Morphology and Stripping Voltammetry

Factors influencing redox magnetohydrodynamic-induced convection for enhancement of stripping analysis

Factors affecting the use of redox magnetohydrodynamics (MHD) to enhance the stripping analysis response to heavy metals have been investigated. The analytes were Pb2+, Cd2+, Cu2+, and Tl+ at concentrations ranging from 5 nM to 2 microM. Co-deposition of analytes with Hg2+ (to form a thin Hg film electrode) occurs along with reduction of a high concentration of Fe3+. The Fe3+ provides the high cathodic current necessary to produce a significant Lorentz force, and therefore enhanced convection and larger stripping signals and sensitivities, when the analysis is performed in the presence of an external magnetic field. The effects of varying Fe3+ concentration (1-100 mM), working electrode size (10 microm-3 mm), and magnetic field strengths (0-1.77 T) generated with electromagnets and NdFeB permanent magnets were investigated. Using 100 mM Fe3+ as the MHD-generating redox species at a 3-mm working electrode and in a magnetic field of 1.77 T, peak areas from linear sweep voltammetry were increased by as much as 159 +/- 5%, compared to the signal obtained in the absence of a magnetic field. Experimental detection limits as low as 5 nM were achieved with only a 1-min preconcentration time. A field strength as low as 0.12 T offers some signal enhancement with 100 mM Fe3+. While linear scan anodic stripping voltammetry was used primarily to obtain the signals after the deposition step, potentiometric stripping analysis was also investigated. Redox MHD is an attractive alternative convection method for applications involving sample volumes too small for mechanical stirring or for in-field applications using portable devices that cannot be complicated by the instrumentation required for mechanical stirring.

Redox magnetohydrodynamic enhancement of stripping voltammetry: toward portable analysis using disposable electrodes, permanent magnets, and small volumes

The use of redox magnetohydrodynamics (MHD) to enhance the anodic stripping voltammetry (ASV) response of heavy metals has been investigated, with respect to achieving portability: disposable electrodes consisting of screen-printed carbon (SPC) on a low temperature co-fired ceramic (LTCC) substrate, small volumes, and permanent magnets. The analytes tested (Cd(2+), Cu(2+), and Pb(2+)) were codeposited on SPC with Hg(2+) to form a Hg thin film electrode. High concentrations of Fe(3+) were used to produce a high cathodic current which generates a significant Lorentz force in the presence of a magnetic field. This Lorentz force induces solution convection during the deposition step, enhancing the mass transport of analytes to the electrode and increasing their preconcentrated quantity in the mercury thin film. Therefore, larger ASV peaks and improved sensitivities are obtained, compared to analyses performed without a magnet. The effects on ASV signal of varying Hg(2+) concentration (0.10 and 1.0 mM), deposition time (10-600 s), and electrode surface roughness were investigated. In addition, analyses were performed using a real lake water matrix. By using the disposable LTCC-SPC working electrodes in small volumes (150 microL) and with small permanent magnets (0.78 T), peak areas were increased by 75% when compared to the signal obtained in the absence of a magnetic field. A limit of detection of 25 nM for Cd(2+) was observed with only a 1 min preconcentration time.

Dental Amalgam, an Alternative Electrode Material for Voltammetric Analyses of Pollutants

Liquid mercury and liquid mercury amalgams are superior electrode materials in voltammetry for analytical purposes. This is mainly due to the high overvoltage to hydrogen, which enables the detection of heavy metals with high negative half-wave potentials. Because of the toxicity of mercury and liquid mercury compounds, their use is increasingly restricted, and cannot be included in voltammetric devices for field and on-line applications. Authors have studied properties of dental amalgam as an electrode material in voltammetry. The results show that dental amalgam acts similarly to a silver electrode. Also, it has a high hydrogen overvoltage, allowing it to be used, e.g., for detection of zinc. In addition, due to special properties of dental amalgam compared with mercury itself, it is not toxic. New in this paper is the determination of nickel and cobalt on the dental amalgam electrode using adsorptive cathodic stripping voltammetry (AdCSV). Also, some new data on detection of zinc, cadmium, lead and thallium are presented. The results show that this electrode can be used over a long period of time without any maintenance, which is important for on-line analyses of pollutants in soil and groundwater.