Separation of linoleic acid oxidation products by micellar electrokinetic capillary chromatography and nonaqueous capillary electrophoresis

Defect-Induced Near-Infrared Photoluminescence of Single-Walled Carbon Nanotubes Treated with Polyunsaturated Fatty Acids

Single-walled carbon nanotubes (SWCNTs) have been incorporated in many emerging applications in the biomedical field including chemical sensing, biological imaging, drug delivery, and photothermal therapy. To overcome inherent hydrophobicity and improve their biocompatibility, pristine SWCNTs are often coated with surfactants, polymers, DNA, proteins, or lipids. In this paper, we report the effect of polyunsaturated fatty acids (PUFAs) on SWCNT photoluminescence. A decrease in the SWCNT bandgap emission (E₁₁) and a new red-shifted emission (E₁₁^-) were observed in the presence of PUFAs. We attribute the change in SWCNT photoluminescence to the formation of oxygen-containing defects by lipid hydroperoxides through photo-oxidation. The observed changes in near-infrared emission of SWCNTs are important for understanding the interaction between SWCNTs and lipid biocorona. Our results also indicate that photoexcited SWCNTs can catalyze lipid peroxidation similarly to lipoxygenases.

Non-aqueous microchip electrophoresis for characterization of lipid biomarkers

In vivo measurements of lipid biomarkers are hampered by their low solubility in aqueous solution, which limits the choices for molecular separations. Here, we introduce non-aqueous microchip electrophoretic separations of lipid mixtures performed in three-dimensional hybrid nanofluidic/microfluidic polymeric devices. Electrokinetic injection is used to reproducibly introduce discrete femtolitre to picolitre volumes of charged lipids into a separation microchannel containing low (100 μM-10 mM) concentration tetraalkylammonium tetraphenylborate background electrolyte (BGE) in N-methylformamide, supporting rapid electro-osmotic fluid flow in polydimethylsiloxane microchannels. The quality of the resulting electrophoretic separations depends on the voltage and timing of the injection pulse, the BGE concentration and the electric field strength. Injected volumes increase with longer injection pulse widths and higher injection pulse amplitudes. Separation efficiency, as measured by total plate number, N, increases with increasing electric field and with decreasing BGE concentration. Electrophoretic separations of binary and ternary lipid mixtures were achieved with high resolution (R s ∼ 5) and quality (N > 7.7 × 10(6) plates m(-1)). Rapid in vivo monitoring of lipid biomarkers requires high-quality separation and detection of lipids downstream of microdialysis sample collection, and the multilayered non-aqueous microfluidic devices studied here offer one possible avenue to swiftly process complex lipid samples. The resulting capability may make it possible to correlate oxidative stress with in vivo lipid biomarker levels.

Separation and Determination of Active Components in Evodiae fructus and its Pharmaceutical Preparations by Non-Aqueous Micellar Electrokinetic Chromatography

In this paper, an easy, economical and effective nonaqueous micellar electrokinetic capillary chromatography (NAMECC) method for the simultaneous determination of two bioactive components (evodiamine and rutaecarpine) in Evodiae Fructus and its pharmaceutical preparations was developed for the first time. After optimization of the separation conditions and concentration conditions, the two alkaloids can be separated by using a fused-silica capillary column (57 × 75 μm I.D.) with a running buffer of 140 mM sodium cholate (SC) in methanol and detected with a diode-array detector (228nm). The second-order derivative electropherograms were applied for resolving overlapping peaks in complicated preparations. Regression equations revealed good linear relationships (correlation coefficients 0.9969-0.9999) between peak heights in second-order derivative electropherograms and concentrations of the two analytes. The relative standard deviations (RSD) of the migration times and the peak height of the two constituents were less than 0.49% and 1.6%. The recoveries of two constituents ranged from 93.5 to 105.6%. The results indicated that baseline separation of the analytes was hard to be achieved in real samples sometimes and second-order derivative electropherograms was applicable for the resolving and analysis of overlapping peaks.

Olive oil by capillary electrophoresis: characterization and genuineness

Olive oil, obtained from Olea europaea L. (Oleaceae) fruits, is an important ingredient in the Mediterranean diet. The purpose of this paper is to review and evaluate olive oil analysis using capillary electrophoresis (CE). This review covers a selection of the literature published on this topic over the past decade. The current state of the art of the topic is evaluated, with special emphasis on separation conditions, analysis purpose, and analytes investigated. CE has been used to characterize or to carry out authenticity studies. Particular attention has been focused on the botanical origin because high-quality monovarietal olive oils have been recently introduced on the markets and their quality control requires the development of new and powerful analytical tools as well as new regulations to avoid fraud. CE represents a good compromise between sample throughput, sample volume, satisfactory characterization, and sustainability for the analysis of target compounds present in olive oils.

Application of non-aqueous micellar electrokinetic chromatography to the analysis of active components in radix Salviae miltiorrhizae and its medicinal preparations

A simple, economical and effective non-aqueous micellar electrokinetic chromatography (NAMEKC) method was developed for simultaneous assay of three bioactive components (cryptotanshinone, tanshinone IIA and tanshinone I) in radix Salviae miltiorrhizae and its medicinal preparations for the first time. After optimization of separation conditions, a buffer of 140 mmol l(-1) sodium cholate (SC) in methanol was selected for the separation of the three tanshinones, but baseline separation of tanshinone I and tanshinone IIA in practical samples was not achieved. Therefore, second-order derivative electropherograms were applied for resolving overlapping peaks. Regression equations revealed good linear relationships (correlation coefficients 0.995-0.999) between peak heights in second-order derivative electropherograms and concentrations of the three analytes. The recoveries of three constituents ranged from 91.3 to 105.7%. The results indicated that baseline separation of the analytes was hard to be achieved in practical samples sometimes and second-order derivative electropherograms was applicable for the resolving and analysis of overlapping peaks.

Separation and determination of active components inSchisandra chinensis Baill. and its medicinal preparations by non-aqueous capillary electrophoresis

A simple, economical and effective non-aqueous capillary electrophoresis separation and detection method was developed for the quantification of deoxyschizandrin and gamma-schizandrin in Schisandra chinensis Baill. and its medicinal preparations for the first time. After optimization of separation conditions, a buffer of 140 mmol/L sodium cholate in methanol was selected for separating the two analytes, but baseline separation of SA and SB in real samples was not obtained. Therefore second-order derivative electropherograms were applied for resolving overlapping peaks. Regression equations revealed good linear relationships (correlation coefficients 0.9975--0.9988) between peak heights in second-order derivative electropherograms and concentrations of the two analytes. The relative standard deviations (RSD) of the migration times and the peak height of the two constituents were in the ranges 0.62--0.79% and 0.25--2.17% (intra-day) and 1.43--2.06 and 4.08--5.72% (inter-day), respectively. The recoveries of the two constituents ranged from 93.2 to 103.0%. The results indicated that baseline separation of the analytes was sometimes hard to obtain in real samples and second-order derivative electropherograms were applicable for the resolution and analysis of overlapping peaks.

Analysis of aminofluorescein-fatty acid derivatives by capillary electrophoresis with laser-induced fluorescence detection at the attomole level: application to mycobacterial fatty acids

A method based on capillary electrophoresis coupled to laser-induced fluorescence detection was developed for the characterization of fatty acids including palmitic, stearic, oleic and tuberculostearic acids. The fatty acids were tagged by 4-aminofluorescein (AF) via a carboxylic acid-amine condensation promoted by N'-(3-dimethylaminopropyl)-N-ethylcarbodiimide (EDC) in non-aqueous solution. Using the optimized derivatization conditions, the fluorophore labeling of the fatty acids was achieved at the nanomolar level. The separation of palmitic, stearic, oleic and tuberculostearic-AF derivatives was achieved in less than 10 min, using 25 mM sodium borate buffer containing 30% of acetonitrile as running electrolyte. The concentration detection limit was found to be 5 nM while the minimum mass limit detection is around 30 attomol. This method was successfully applied to identification of mycobacteria via the characterization of tuberculostearic acid and found to be suitable for the detection of a minimum of 10(6) mycobacteria.

Non-aqueous capillary electrophoresis

The benefits of non-aqueous capillary electrophoresis have been described in a number of recent publications. The wide selection of organic solvents, with their very different physicochemical properties, broadens our scope to manipulate separation selectivity. The lower currents present in non-aqueous solvents allow the use of high electric field strengths and wide bore capillaries, the latter in turn allowing larger sample load. In many cases detection sensitivity can also be enhanced. The potential of non-aqueous capillary electrophoresis is discussed throughout the paper, and the feasibility of capillary electrophoresis under non-aqueous media is demonstrated with reference to several applications.

Capillary electrophoresis of drugs: current status in the analysis of pharmaceuticals

The current status of capillary electrophoresis (CE) in pharmaceutical analyses is reviewed with about 300 references, mainly from 1996 until 1999. This article covers the use of CE for assay and purity determination of the main component, analysis of natural medicines, antisense DNA, peptides, and proteins. Analysis of hydrophobic and/or electrically neutral drugs by electrokinetic chromatography, capillary electrochromatography and nonaqueous CE is critically evaluated. Detailed techniques for the separation of enantiomers are given in the text with some actual applications. Furthermore, this review includes sensitivity and regulatory aspects for the actual use of CE in new drug applications (NDA). The analytical validation required for CE in NDA is also treated.