Effects of BisGMA and TEGDMA on proliferation, migration, and tenascin expression of human fibroblasts and keratinocytes

Toxicity evaluation of Pinus radiata D.Don bark wax for potential cosmetic application

Radiata pine bark is a widely available organic waste, requiring alternative uses due to its environmental impact on soil, fauna, and forest fires. Pine bark waxes could be used as cosmetic substitutes, but their toxicity requires evaluation since pine bark may contain toxic substances or xenobiotics, depending on the extraction process. This study evaluates the toxicity of radiata pine bark waxes obtained through various extraction methods on human skin cells grown in vitro. The assessment includes using XTT to evaluate mitochondrial activity, violet crystal dye to assess cell membrane integrity, and ApoTox-Glo triple assay to measure cytotoxicity, viability, and apoptosis signals. Pine bark waxes extracted via T3 (acid hydrolysis and petroleum ether incubation) and T9 (saturated steam cycle, alkaline hydrolysis, and petroleum ether incubation) exhibit non-toxicity up to 2% concentration, making them a potential substitute for petroleum-based cosmetic materials. Integrating the forestry and cosmetic industries through pine bark wax production under circular economy principles could promote development while replacing petroleum-based materials. Extraction methodology affects pine bark wax toxicity in human skin cells due to the retention of xenobiotic compounds including methyl 4-ketohex-5-enoate; 1-naphthalenol; dioctyl adipate; eicosanebioic acid dimethyl ester; among others. Future research will investigate whether the extraction methodology alters the molecular structure of the bark, affecting the release of toxic compounds in the wax mixture.

Magnet Integrated Fabric Phase Sorptive Extraction for the Extraction of Resin Monomers from Human Urine Prior to HPLC Analysis

In this work, a method for the simultaneous determination of four resin monomers: Bisphenol A, bisphenol A methacrylate glycidate, triethyleneglycol-dimethacrylate, and urethane dimethacrylate, from human urine using magnet integrated fabric phase sorptive extraction (MI-FPSE), followed by high performance liquid chromatography (HPLC) diode array detection (HPLC-DAD), is presented. MI-FPSE is a novel configuration of FPSE that incorporates the stirring and extraction mechanism into one device, resulting in an improved extraction kinetic factor. FPSE is a green sample preparation technique that uses a flexible surface, such as cellulose, coated with a polymeric material using sol–gel technology. Poly(tetrahydrofuran) (PTHF) material was selected, due to its higher efficiency in terms of recovery rate among the studied MI-FPSE membranes. Optimization of the extraction process was performed based on several extraction and elution parameters. The method was validated for its linearity, selectivity, accuracy, precision, and stability of the samples. For the four compounds, the LOD and LOQ were 0.170 ng/μL and 0.050 ng/μL, respectively. The relative standard deviation of the method was less than 9.8% and 11.9%, for the within-day and between-day precision, respectively. The relative recoveries were between 85.6 and 105.2% in all cases, showing a good accuracy. The effectiveness of the proposed method was confirmed through successful application to the bioanalysis of real urine samples.

Release of leachable products from resinous compounds in the saliva of children with anterior open bite treated with spur

BACKGROUND

To evaluate the release of bisphenol-A glycidyl methacrylate (BisGMA), triethylene glycol dimethacrylate (TEGDMA), bisphenol A (BPA), and phthalates of the composite resin used in the bonding of spurs applied in the treatment of children with anterior open bite and its effects on human keratinocytes.

METHODOLOGY

Saliva samples of 22 children were collected before spur attachment (baseline) and 30 minutes (min) and 24 hours (h) after spur bonding. Analysis was performed using high-performance liquid chromatography (HPLC) coupled to tandem mass spectrometry (HPLC-MS/MS) and gas chromatography coupled to mass spectrometry (GC-MS). Standardized resin increments were added to three different dilutions of the cell culture medium. Keratinocytes (HaCaT) were cultivated in the conditioned media and evaluated for cell viability (MTT) and cell scratch assay.

RESULTS

The levels of BisGMA (1.74±0.27 μg/mL), TEGDMA (2.29±0.36 μg/mL), and BPA (3.264±0.88 μg/L) in the saliva after 30 min, in comparison to baseline (0±0 μg/mL, 0±0 μg/mL, and 1.15±0.21 μg/L, respectively), presented higher numbers. After 24 h, the levels of the monomers were similar to the baseline. Phthalates showed no significant difference among groups. HaCat cells showed increased viability and reduced cell migration over time after exposure to methacrylate-based resin composites.

CONCLUSION

Resin composites, used to attach spurs in children with anterior open bite during orthodontic treatment, release monomers after polymerization and can influence the behavior of human keratinocytes, even at very low concentrations. Orthodontists should be aware of the risks of the resinous compounds release and preventive procedures should be held to reduce patient exposure.

Morphological and kinetic study of oral keratinocytes assembly on reconstituted basement membrane: Effect of TEGDMA

OBJECTIVE

Open wounds of oral cavity require rapid healing. The cytotoxic monomer, triethylene glycol dimethacrylate (TEGDMA) can leach out from dental restoratives, reach the oral epithelial barrier and trigger an immune response. It is speculated that low and moderate concentrations of TEGDMA (0.5 and 1.5 mmol/L, respectively) influence the assembly kinetics and morphology of the keratinocyte layers overlying the extracellular matrix (ECM) in vivo. A three-dimensional cell system composed of immortalized oral keratinocytes (iMOK) cultured on reconstituted basement membrane (ECM) was used to investigate the development of epithelial layers upon exposure to TEGDMA.

METHODS

Adherence and opposing movement of adjacent keratinocytes using actin protrusions (lamellipodia and filopodia) to create spheroids, and their fusion capacity to establish subsequent layers were tested at different time points. Fluorescent, confocal, differential interference contrast microscopy and image processing were employed to quantify the morphological modifications over time.

RESULTS

Increasing concentrations of TEGDMA decreased the number of viable cells that utilized the actin protrusions and led to a delay in the communication/interaction among cells. Consequently, cells assembly was affected and the formation of more than a single layer prevented. Areas of basal-like proliferating cells were replaced with the increasing areas of non-replicating large cell population and extended gaps.

CONCLUSIONS

These findings suggest that TEGDMA may prevent rapid sealing of open wounds by keratinocytes and suppress the establishment of a resistant and impermeable barrier against pathogen internalization. The iMOK-ECM-based platform facilitated the validation and quantification of solubilized dental materials impact on the reconstitution of epithelial layer.

Assessing the effect of triethyleneglycol dimethacrylate on tissue repair in 3D organotypic cultures

Leachables from dental restoratives induce toxicity in gingival and pulp tissues and affect tissue regeneration/healing. Appropriate testing of these materials requires a platform that mimics the in vivo environment and allows the architectural self-assembly of cells into tissue constructs. In this study, we employ a new 3D model to assess the impact of triethyleneglycol dimethacrylate (TEGDMA) on early organization and advanced recruitment/accumulation of immortalized mouse gingival fibroblasts (GFs) and dental papilla mesenchymal cells (DPMCs) in extracellular matrix. We hypothesize that TEGDMA (1) interferes with the developmental architecture of GFs and DPMCs, and (2) inhibits the deposition of mineral. To test these hypotheses, GFs and DPMCs were incubated with the soluble TEGDMA at concentrations (0-2.5) mmol/L. Diameter and thickness of the constructs were determined by microscopic analysis. Cell differentiation was assessed by immunocytochemistry and the secreted mineral detected by alizarin-red staining. TEGDMA interfered with the development of GFs and/or DPMCs microtissues in a dose-dependent manner by inhibiting growth of inter-spherical cell layers and decreasing spheroid size (four to six times). At low/moderate TEGDMA levels, GFs organoids retained their structures while reducing thickness up to 21%. In contrast, at low TEGDMA doses, architecture of DPMC organoids was altered and thickness decreased almost twofold. Overall, developmental ability of TEGDMA-exposed GFs and DPMCs depended on TEGDMA level. GFs constructs were more resistant to structural modifications. The employed 3D platform was proven as an efficient tool for quantifying the effects of leachables on tissue repair capacities of gingiva and dental pulp.

Evaluation of Cytotoxicity of Silorane and Methacrylate based Dental Composites using Human Gingival Fibroblasts

AIM

The effects of leached substances from the restorative dental materials may induce local and systemic adverse effects. Thus the biological and toxic properties of the restorative dental materials must be compatible with the oral tissues or with general health. Therefore, the need for biocompatible restorative dental material implies the necessity of toxicity testing. It was the purpose of this investigation to determine and compare the possible toxic effect of silorane based composite (Filtek P90) on human gingival fibroblast (HGF) in vitro using cytotoxicity measuring parameters (MTT assay) in comparison with its methacrylate counterpart (Z100) for their viability, proliferation rate.

MATERIALS AND METHODS

Fresh healthy biopsy specimens of human gingival tissue of patients were obtained. For HGF, cells were cultured in Dulbecco's modified Eagle medium and grown to sub confluent monolayers. After attaining confluence, cells were treated with different doses of the Filtek P90 or Z 100 for different time point. HGF cells were observed for their proliferation, viability by MTT assay.

RESULTS

The results of the cytotoxicity assay showed that, the percentage of viable cells was very good in the first 24h and marginally decreased in the next 48h period in all groups. However, the proliferation rate was never below 84% in all the groups, at any given concentration. Filtek P90 and Z100 treated cells exhibited insignificant decrease in the cell proliferation both in 24h and 48h exposure when compared to significant decrease in the cell survival rate in the positive control (Mitomycin C 250 μg/ml).) Comparison of the toxicity between Filtek P90 and Z100 in 24h & 48h separately showed that there was no significant difference (p<0.05) between these two composites in 24h and 48h' time period at all concentrations of the composites.

CONCLUSION

To conclude, the new silorane based restorative composite showed comparable cytotoxic characteristics to clinically successful dimethacrylate composites suggesting the non-toxic nature in the oral environment and hence contributing to clinical success of these new restorative materials.

Cytotoxicity of low-shrink composites with new monomer technology on bovine dental pulp-derived cells

Objectives:

The aim of this study was to evaluate the cytotoxicity of four low-shrink composites with new monomer technology on the bovine dental pulp-derived cells (bDPCs).

Materials and methods:

Ten samples were prepared for each group composites, and the samples were immersed in 7 mL of culture medium for 72 h at 37°C to extract residual monomer or cytotoxic substances. The culture medium containing the material extracts was sterile filtered for use on the cell cultures. Materials were incubated in medium with serum for 72 h. bDPCs were maintained in a medium with serum. A real-time cell analyzer was used to evaluate cell survival. After seeding 200 mL of the cell suspensions into the wells (10,000 cells/well) of the E-plate 96, bDPCs were treated with bioactive components released by the composite materials (1:1 and 1:2 dilutions) and monitored every 15 min for 50 h.

Results:

According to analysis of variance, there were significant differences between the cell indexes of the control and GC kalore ( p < 0.05) and Bisco Reflexions ( p < 0.001) groups for the 1:1 dilutions at 25 h. When evaluated at 50 h, 1:1 dilutions of GC Kalore ( p < 0.01) and Bisco Reflexions ( p < 0.001) reduced cell survival significantly.

Conclusions:

Although composites resins are being advanced, their cytotoxic effects have been proceeding till this time. However, two of the four materials tested significantly reduced cell viability when compared with control.

Clinical relevance:

Research should focus on the cytotoxicity of composites in addition to their mechanical properties.

Novel injectable biomaterials for bone augmentation based on isosorbide dimethacrylic monomers

Drawbacks with the commonly used PMMA-based bone cements, such as an excessive elastic modulus and potentially toxic residual monomer content, motivate the development of alternative cements. In this work an attempt to prepare an injectable biomaterial based on isosorbide-alicyclic diol derived from renewable resources was presented. Two novel dimethacrylic monomers ISDGMA - 2,5-bis(2-hydroxy-3-methacryloyloxypropoxy)-1,4:3,6-dianhydro-sorbitol and ISETDMA - dimethacrylate of ethoxylated isosorbide were synthesized and used to prepare a series of low-viscosity compositions comprising bioactive nano-sized hydroxyapatite in the form of a two-paste system. Formulations exhibited a non-Newtonian shear-thinning behavior, setting times between 2.6 min and 5.3 min at 37°C and maximum curing temperatures of 65°C. Due to the hydrophilic nature of ISDGMA, cured compositions could absorb up to 13.6% water and as a result the Young's modulus decreased from 1,429 MPa down to 470 MPa. Both, poly(ISDGMA) and poly(ISETDMA) were subjected to a MTT study on mice fibroblasts (BALB/3T3) and gave relative cell viabilities above 70% of control. A selected model bone cement was additionally investigated using human osteosarcoma cells (SaOS-2) in an MTS test, which exhibited concentration-dependent cell viability. The preliminary results, presented in this work reveal the potential of two novel dimethacrylic monomers in the preparation of an injectable biomaterial for bone augmentation, which could overcome some of the drawbacks typical for conventional acrylic bone cement.

Infrared spectroscopic analysis of restorative composite materials' surfaces and their saline extracts

This study aims at finding out if multiple attenuated internal reflection-infrared (MAIR-IR) spectroscopic analysis can be used as a tool to differentiate commercial resin composite brands and to find out if different resin composites will have different abilities of leaching materials that are cytotoxic to human gingival fibroblasts (HGFs) Tooth-colored resin fillings have become increasingly popular as restorative materials, which make it important to differentiate the commercial brands for forensic and biological purposes. Fourteen resin composite brands were used in the study. MAIR-IR spectroscopic analysis was used for surface characterization of the organic and inorganic parts of the resin composite samples which were studied as is and after 2 weeks of saline incubation. IR spectroscopy was also done on the saline extracts to find out if different resin composite materials would have different leaching abilities. The saline extracts were also used for the viability testing of HGF cell cultures. One-way analysis of variance test statistics was used to analyze the results. It was found that the resin composite brands have different spectra after saline soaking. It was also found that these resin composite brands possess different leaching abilities with regard to the amount and type of materials and different cytotoxic effects, which were found to be threshold dependent, meaning there is a critical or threshold value of leaching material at or above which the toxic effect will be significant and below which there is no toxic effect. Therefore, IR spectroscopy might be considered as a useful tool for dental resin composite characterization. However, more oral simulating environmental testing methods, different surface characterization methods, and more cell viability testing methods and assays must be considered for more specific results which relate more to the behavior of these dental resin composites in the oral environment.

Investigation on synthesis and properties of isosorbide based bis-GMA analogue

The aim of this work was to synthesize and investigate properties of a novel dimethacrylic monomer based on bioderived alicyclic diol--isosorbide. Its potential as a possible substitute of 2,2-bis[4-(2-hydroxy-3-methacryloyloxypropoxy)phenyl]propane (BISGMA), widely used in dental restorative materials and suspected for toxicity was assessed. The novel monomer was obtained in a three-step synthesis. First, isosorbide was etherified by a Williamson nucleophilic substitution and subsequently oxidized to isosorbide diglycidyl ether (ISDGE). A triphenyl phosphine catalyzed addition of methacrylic acid to ISDGE resulted in 2,5-bis(2-hydroxy-3-methacryloyloxypropoxy)- 1,4:3,6-dianhydro-sorbitol (ISDGMA). The monomer obtained was photopolymerized using camphorquinone/2-(dimethylamino)ethyl methacrylate initiating system. Next, compositions with triethylene glycol dimethacrylate (TEGDMA) were prepared and polymerized. Double bond conversion, polymerization shrinkage and water sorption of resulting polymers were determined. Selected mechanical (flexular strength and modulus, Brinell hardness) and thermomechanical (DMA analysis) properties were also investigated. BISGMA based materials were prepared as reference for comparison of particular properties.

Kyphoplasty as an alternative treatment of traumatic thoracolumbar burst fractures Magerl type A3

INTRODUCTION

Traumatic thoracolumbar spine fractures are frequently classified as burst fractures Magerl type A3. There still are many controversies regarding the treatment of this fracture. The therapeutic spectrum ranges from conservative to invasive operative methods with attendant morbidities. The minimal-invasive technique of kyphoplasty has established itself as a common treatment of osteoporotic vertebral compression fractures and is associated with a low complication rate. The aim of this study is to evaluate the functional and radiological results after kyphoplasty of traumatic thoracolumbar burst fractures.

PATIENTS AND METHODS

Patients with traumatic thoracolumbar fractures type A3.1, A3.2 and A3.3, who were treated with kyphoplasty, were included in this study. The clinical outcome was measured at follow up with a neurological assessment, the visual analogue pain scale (VAS), the Oswestry Disability Score (ODI) and the SF-36 Health Survey. The radiological measurements, performed on preoperative, postoperative and follow up radiographs, included the sagittal index, the wedge angle and the modified Cobb angle of Daniaux.

RESULTS

26 patients with 23 A3.1, one A3.2 and five A3.3 fractures were treated between 2004 and 2007, including five patients with multiple vertebral fractures. At follow up the Oswestry Disability Score (26.2%) and the SF-36 score (60.1%) assessed a moderately limitation of functional outcome and quality of life without any neurological deficits. Radiological measurements showed a postoperative height restoration and reduction of kyphosis, but at follow up a secondary loss of correction except in five cases. Six minor ventrocranial cement leakages without further clinical consequence were observed.

CONCLUSIONS

The present study showed that kyphoplasty is a safe and feasible method for the treatment of burst fractures. It allowed the correction of the kyphosis, stabilisation of the facture, pain reduction and early mobilisation.

Effects of the iron-chelating agent deferoxamine on triethylene glycol dimethacrylate, 2-hydroxylethyl methacrylate, hydrogen peroxide-induced cytotoxicity

Triethylene glycol dimethacrylate (TEGDMA) and 2-hydroxylethyl methacrylate (HEMA) are known to deplete glutathione in mammalian cells, generate reactive oxygen species (ROS), and cause oxidative stress. In this study, we investigated whether hydroxyl radicals (·OH), the most lethal and genotoxic ROS, and the Fenton reaction are involved in the cytotoxicity of resin monomers to four different cell types, namely MC3T3-E1 preosteoblasts, human dental pulp cells (HDPCs), human gingival fibroblasts, and L929 mouse fibroblasts. Deferoxamine (DFO), an iron chelating agent, effectively protected MC3T3-E1 cells from resin monomer-induced cytotoxicity, indicating that cytotoxicity was caused primarily by hydroxyl radicals. However, DFO only had a protective effect against relatively high concentrations of TEGDMA and HEMA in HDPCs and human gingival fibroblasts, and resin monomer-induced cytotoxicity in L929 was not attenuated by DFO. A labile iron pool (LIP) was detectable only in MC3T3-E1 cells among the four cell types. This indicates that the generation of hydroxyl radicals induced by resin monomers is likely dependent on LIP levels. In contrast to resin monomers, hydrogen peroxide (H(2)O(2))-induced cytotoxicity was not prevented by DFO in any of the cell types examined, although hydroxyl radicals were detected in MC3T3-E1 cells and HDPCs on exposure to exogenous H(2)O(2). This result suggests that generation of hydroxyl radicals is not always the primary cause of cytotoxicity in H(2)O(2)-treated cells.

Matrix metalloproteinase-2 expression induced by two different adhesive systems on human pulp fibroblasts

INTRODUCTION

This study evaluated the expression of matrix metalloproteinase-2 (MMP-2) in primary cultures of human pulp fibroblasts (HPFs) when exposed to extracts from dentin-bonding systems.

METHODS

Polymerized resin disks of the bonding agent of a 2-step self-etch adhesive (TechBond, Isasan, Rovello Porro, Italy) or of the primer/bonding agent a 2-step etch-and-rinse adhesive (Optibond Solo; Sybron-Kerr, Orange, CA) were immersed in HPF culture medium for 24 or 96 hours. HPFs were incubated in the adhesive-conditioned or control (untreated) culture medium for 24 hours. Western blot and immunofluorescence analyses were performed to assay MMP-2 expression.

RESULTS

MMP-2 expression levels in HPFs cultured for 24 hours in culture medium were similar in both the control and experimental media groups showing a faint band at 67 kDa. Conversely, the HPFs incubated in the medium that contain polymerized resin disks for 96 hours showed increased MMP-2 expression compared with the untreated medium. The self-etch adhesive displayed the most pronounced induction of MMP-2 expression. These findings were confirmed by immunofluorescence analysis.

CONCLUSIONS

HPFs display increased MMP-2 expression after 96 hours of conditioning of the HPF culture medium with polymerized disks of dentin bonding systems. This MMP-2 expression/activation may represent a defence mechanism exhibited by HPFs towards monomers eluted from the dentin bonding systems.

Histological evaluation of rat tissue response to GMTA, Retroplast, and Geristore retrograde filling materials

The aim of the study was to compare the short-term biocompatibility of grey mineral trioxide aggregate (GMTA), Retroplast and Geristore. Silicon tubes filled with the materials and empty control tubes were implanted in the dorsal connective tissue of 30 Wistar albino rats. The tubes and surrounding tissues were excised and prepared for histological examination at 1 week, 1 month and 2 months after implantation. Inflammatory cell counts and the presence or absence of necrosis adjacent to the materials and control tubes were recorded. Data were statistically analysed using one-way anova and Tukey's multiple comparisons tests. The empty control tubes were well tolerated. All tested materials showed a more severe initial reaction than the control group. With time, the reaction became chronic, with variable increase in the numbers of inflammatory cells. Retroplast recorded the most statistically significant increase in the sum of inflammatory cells. Although the increase in the sum of inflammatory cells was statistically significant for Geristore but not for GMTA, the inflammatory cell counts for both were comparable. It was concluded that the three materials continued to irritate tissues throughout the evaluation period. Retroplast was the least biocompatible of the three tested materials at 2 months, followed by Geristore then GMTA.

Molecular toxicology of substances released from resin-based dental restorative materials

Resin-based dental restorative materials are extensively used today in dentistry. However, significant concerns still remain regarding their biocompatibility. For this reason, significant scientific effort has been focused on the determination of the molecular toxicology of substances released by these biomaterials, using several tools for risk assessment, including exposure assessment, hazard identification and dose-response analysis. These studies have shown that substances released by these materials can cause significant cytotoxic and genotoxic effects, leading to irreversible disturbance of basic cellular functions. The aim of this article is to review current knowledge related to dental composites' molecular toxicology and to give implications for possible improvements concerning their biocompatibility.

Biocompatibility of Resin-based Dental Materials

Oral and mucosal adverse reactions to resin-based dental materials have been reported. Numerous studies have examined the biocompatibility of restorative dental materials and their components, and a wide range of test systems for the evaluation of the biological effects of these materials have been developed. This article reviews the biological aspects of resin-based dental materials and discusses the conventional as well as the new techniques used for biocompatibility assessment of dental materials.

Comparison of an experimental bone cement with surgical Simplex P, Spineplex and Cortoss

Conventional polymethylmethacrylate (PMMA) cements and more recently Bisphenol-a-glycidyl dimethacrylate (BIS-GMA) composite cements are employed in procedures such as vertebroplasty. Unfortunately, such materials have inherent drawbacks including, a high curing exotherm, the incorporation of toxic components in their formulations, and critically, exhibit a modulus mismatch between cement and bone. The literature suggests that aluminium free, zinc based glass polyalkenoate cements (Zn-GPC) may be suitable alternative materials for consideration in such applications as vertebroplasty. This paper, examines one formulation of Zn-GPC and compares its strengths, modulus, and biocompatibility with three commercially available bone cements, Spineplex, Simplex P and Cortoss. The setting times indicate that the current formulation of Zn-GPC sets in a time unsuitable for clinical deployment. However during setting, the peak exotherm was recorded to be 33 degrees C, the lowest of all cements examined, and well below the threshold level for tissue necrosis to occur. The data obtained from mechanical testing shows the Zn-GPC has strengths of 63 MPa in compression and 30 MPa in biaxial flexure. Importantly these strengths remain stable with maturation; similar long term stability was exhibited by both Spineplex and Simplex P. Conversely, the strengths of Cortoss were observed to rapidly diminish with time, a cause for clinical concern. In addition to strengths, the modulus of each material was determined. Only the Zn-GPC exhibited a modulus similar to vertebral trabecular bone, with all commercial materials exhibiting excessively high moduli. Such data indicates that the use of Zn-GPC may reduce adjacent fractures. The final investigation used the well established simulated body fluid (SBF) method to examine the ability of each material to bond with bone. The results indicate that the Zn-GPC is capable of producing a bone like apatite layer at its surface within 24 h which increased in coverage and density up to 7 days. Conversely, Spineplex, and Simplex P exhibit no apatite layer formation, while Cortoss exhibits only minimal formation of an apatite layer after 7 days incubation in SBF. This paper shows that Zn-GPC, with optimised setting times, are suitable candidate materials for further development as bone cements.

Macrophage response to methacrylate conversion using a gradient approach

Incomplete conversion, an ongoing challenge facing photopolymerized methacrylate-based polymers, affects leachables as well as the resulting polymer network. As novel polymers and composites are developed, methods to efficiently screen cell response to these materials and their properties, including conversion, are needed. In this study, an in vitro screening methodology was developed to assess cells cultured directly on cross-linked polymer networks. A gradient in methacrylate double bond conversion was used to increase the experimental throughput. A substrate of 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy)phenyl] propane (BisGMA) and triethylene glycol dimethacrylate (TEGDMA) was prepared with a conversion ranging from 43.0% to 61.2%. Substrates aged for 7 days had no significant differences in surface roughness or hydrophilicity as a function of conversion. Leachables were detectable for at least 7 days using UV absorption, but their global cytotoxicity was insignificant after 5 days of aging. Thus, RAW 264.7 macrophage-like cells were cultured on aged substrates to evaluate the cell response to conversion, with possible contributions from the polymer network and local leachables. Conversions of 45% and 50% decreased viability (via calcein/ethidium staining) and increased apoptosis (via annexin-V staining). No significant changes (p>0.05) in tumor necrosis factor-alpha and interleukin-1beta gene expression, as measured by quantitative, real-time reverse transcription-polymerase chain reaction, were seen as conversion increased. Thus, conversions greater than 50% are recommended for equimolar BisGMA/TEGDMA. The ability to distinguish cell response as a function of conversion is useful as an initial biological screening platform to optimize dental polymers.

Cytotoxicity of resin monomers on human gingival fibroblasts and HaCaT keratinocytes

OBJECTIVES

The aim of this study was to evaluate and compare the biological effects of three resin monomers on three human gingival fibroblast (HGF) cell lines and immortalised human keratinocytes.

METHODS

Primary HGFs and HaCaT keratinocytes were cultured for 24h and grown to sub-confluent monolayers. Resin monomers were dissolved in dimethyl sulphoxide (DMSO) and diluted with culture medium. Cultures were exposed to different concentrations of monomers (10(-2) to 10mM) for 24h. Cell viability measured by Alamar Blue assay, and cell culture supernatant was examined for the presence of human interlukin-1beta (IL-1beta) using sandwich enzyme-linked immunosorbant assay (ELISA). TC50 values were calculated from fitted dose-response curves.

RESULTS

All monomers showed toxic effects on the HGFs and HaCaT cells and inhibited chemical reduction of Alamar Blue in high concentrations. Statistical analysis of TC50 values by one-way ANOVA followed by Tukey's analysis showed that there is a significant difference in TC50 values between the cell lines (p<0.05), although the rank order of monomer toxicity remained the same for different cell lines. None of these monomers-induced IL-1beta release from HGFs and HaCaT cells.

SIGNIFICANCE

Dental resin monomers are toxic to human gingival fibroblasts and HaCaT keratinocytes. However, they cannot induce IL-1beta release from these cells by themselves. Alamar Blue assay is a sensitive method for the evaluation of cytotoxicity and it can detect different sensitivities of different cell lines to the resin monomers.

In vivo effects of BISGMA-a component of dental composite-on male mouse reproduction and fertility

The aim of this study is to investigate the effects of the resin monomer bisphenol A glycerolate dimethacrylate (BISGMA) on adult male mouse fertility. Male Swiss mice were administered various concentrations of BISGMA (0, 25, and 100 microg/kg) for a period of 28 days, and the effects on fertility was assessed by breeding these males with untreated female mice after the exposure periods. The results showed that fertility was significantly reduced when male mice were exposed to BISGMA, in comparison with their control counterparts. In females mated with males exposed to BISGMA, there was a significant reduction in the pregnancy rates as well as the number of viable fetuses. The number of resorptions out of the total number of implantations was significantly increased in females mated with males that had been exposed to BISGMA. Furthermore, the number of females with resorptions was also significantly increased. Significant reductions in bodyweight and weights of the testis and preputial glands were also observed. The weights of the seminal vesicles were significantly increased in males exposed to BISGMA in comparison with their control counterparts. There were significant reductions in testicular sperm counts, epididymal sperm counts and in the efficiency of sperm production. In conclusion, exposure of male mice to BISGMA results in an impairment of the reproductive system and fertility.

Cytotoxicity Evaluation of Two Different Composites with/without Fibers and One Nanohybrid Composite

In this study, cytotoxicity of two different composites with/without fibers (Adoro/Vectris and SculpturePlus/FiberKor) and one nanohybrid composite (Artglass) were investigated and compared. Composites used in the study were prepared as cylindrical discs of 2 mm depth and 8 mm diameter according to ISO 10993 recommendation. Adoro/Vectris and SculpturePlus/ FiberKor groups were divided into composite, fiber, and composite+fiber groups. Agar diffusion method was employed, and cytotoxicity rankings were determined using lysis index scores. For statistical analysis, Kruskal-Wallis and Mann-Whitney U tests were used. Amongst the composites, Adoro was found to be less cytotoxic than Sculpture Plus and Artglass materials--which were of the same cytotoxicity ranking. Between the fiber and composite materials, the former were found to be more cytotoxic than the latter; in particular, Vectris was found to be more cytotoxic than FiberKor. It was observed that upon combining with the fibers, the cytotoxic effect of the composites increased. This cytotoxicity enhancement was manifested as an additional effect in Adoro/Vectris group but as a synergistic effect in SculpturePlus/FiberKor group.

The effects of BIS-GMA and TEG-DMA on female mouse fertility

OBJECTIVES

The current study evaluated the effect of bisphenol A glycerolate dimethacrylate (BIS-GMA) and triethyleneglycol dimethacrylate (TEG-DMA) on female mouse fertility.

METHODS

Adult female mice were exposed to BIS-GMA or TEG-DMA (0, 25 and 100 microg/kg) intragastrically daily for 28 d and then mated with sexually mature untreated male mice and after mating their fertility was assessed.

RESULTS

In females exposed to BIS-GMA at both doses significant increases in the total number of resorptions out of the total number of implantations were observed, with a significant increase in the number of animals with resorptions at the higher dose. Significant reductions in body weights and significant increases in ovary weights were also observed. Exposure to TEG-DMA at a dose of 100 microg/kg resulted in significant reductions in pregnancy rates and a significant increase in the total number of embryonal resorptions. Significant reductions in body and uterine weights were also observed in females exposed to TEG-DMA.

SIGNIFICANCE

The results suggest that both BIS-GMA and TEG-DMA have reproductive toxic effects in female mice.

Preferential Attachment of Human Gingival Fibroblasts to the Resin Ionomer Geristore

The resin ionomer Geristore has been used extensively for root perforation repairs. The purpose of this study was to evaluate oral in vitro biocompatibility of the resin ionomer Geristore compared to two other dental perforation repair materials, Ketac-Fil and Immediate Restorative Material (IRM). Growth and morphology of human gingival fibroblasts (HGFs) was determined using scanning electron microscopy (SEM) of HGFs cells grown on test materials as well as cytotoxicity assays using eluates from test materials. SEM analysis showed that HGFs attached and spread well over Geristore with relatively normal morphology. SEM showed that fibroblasts did not attach and spread well over Ketac-Fil or IRM as cells appeared much fewer with rounded and different morphology than fibroblasts grown on Geristore. Cytotoxicity assays indicated that HGFs proliferated in the presence of Geristore eluates and not in the presence of Ketac-Fil or IRM eluates. In vitro interpretation indicates that Geristore is less cytotoxic to gingival fibroblasts.

Cytotoxicity evaluation of dental resin composites and their flowable derivatives

The release of components from dental composite into surrounding tissue may cause an adverse tissue reaction. Thus, this study investigated the cytotoxicity of three types of dental composites with their flowable derivatives and determined the compounds released from these materials by high-performance liquid chromatography (HPLC) analysis. Fifteen specimens from each composite (Admira, Z250, Tetric Ceram) with fifteen of their flowables (Admira Flow, Tetric Flow, Feltik Flow) were prepared in the form of discs and divided into two groups of 10 and 5 for each material. The first group (10 discs) was used to evaluate the cytotoxicity of the material on balb/c 3T3 fibroblasts by measuring cellular metabolic activity (3{4,5-dimethylthiazol-2-yl}-2,5-diphenyltetrazolium bromide [MTT] assay) relative to Teflon controls, while the second group (5 discs) was used to determine the leached components from each material into culture medium by HPLC analysis. The results revealed that Z250 and Tetric Ceram were less cytotoxic than their flowable derivatives. However, the ormocer, Admira, was significantly more cytotoxic than Admira Flow. Among the standard composites, Tetric Ceram was the least cytotoxic and Admira the most. Furthermore, Tetric flow was the most cytotoxic and Admira flow was significantly the least cytotoxic among the flowable materials tested. HPLC analysis revealed bisphenol A glycerolate dimethacrylate (bis-GMA) and triethylene glycol dimethacrylate (TEGDMA) in the eluates of all the materials, while urethane dimethacrylate (UDMA) was present in all eluates except that of Feltik Flow. In conclusion, the flowable derivatives are more cytotoxic than the traditional composites whereas the ormocer Admira Flow is less cytotoxic than the Admira composite.

Effects of BisGMA on glutathione metabolism and apoptosis in human gingival fibroblasts in vitro

Aim of this study was to investigate the effects of the resin monomer BisGMA on the glutathione concentration (monobromobimane assay) and apoptosis (Annexin V/PI-assay) of cultured primary human gingival fibroblasts. Cells were treated for up to 24h with 0.001-0.25 mM BisGMA to determine growth curves using the DNA stain H33342. Subsequent Annexin V/PI-assays revealed that fibroblasts exposed to concentrations of 0.005-0.01 mM (non-cytotoxic) and 0.05 mM (ED(10)-concentration) showed no increase of the share of apoptotic cells compared to non-treated controls (5-8%), while 0.1 mM BisGMA (approximately ED(50)-concentration) caused a significant increase of the percentage of apoptotic cells (50%). Simultaneously to the induction of apoptosis, 0.1 and 0.25 mM of BisGMA caused a significant depletion of the intracellular GSH content after 18 h of incubation. Our results indicate that BisGMA at concentrations >0.1 mM causes an extreme depletion of the intracellular GSH pool as well as apoptosis.

Chemical-Biological Interactions of the resin monomer triethyleneglycol-dimethacrylate (TEGDMA)

Most dental resinous materials contain high quantities of the diluent monomer triethyleneglycol-dimethacrylate (TEGDMA). Due to its 'hydrophilic' nature, significant amounts of this substance leach into an aqueous environment, such as the oral cavity. Therefore, it is hypothesized that TEGDMA frequently interferes with oral and/or systemic tissues. In vitro studies revealed that TEGDMA is considerably cytotoxic in various cell cultures. It has also been observed that TEGDMA can easily penetrate membranes and subsequently may react with intracellular molecules. The formation of glutathione-TEGDMA adducts is of specific interest, since the nearly complete exhaustion of this molecule significantly reduces its cellular detoxifying potency. Large deletions of DNA sequences were caused by TEGDMA, resulting in high mutation frequency. In addition, TEGDMA has been identified as an important resinous sensitizer in patients and professionals. Taken together, available in vitro information, in vivo studies with animals, and clinical data as well indicate that TEGDMA may contribute considerably to local and systemic adverse effects caused by dental resins.

Effects of mechanical force on primary human fibroblasts derived from the gingiva and the periodontal ligament

Previous experiments have shown that mechanical stress may alter the interactions between cells and extracellular matrix (ECM). The purpose of our study was to investigate the effects of mechanical load on metabolism and ECM expression of primary human periodontal cells. The influence of gravitational force on proliferation, lactate dehydrogenase (LDH) release, and tenascin expression of gingival (HGF) and periodontal ligament fibroblasts (HPDL), as well as their adhesion to various extracellular matrix (ECM) components, was determined. Cells were centrifuged in microplates or flat tubes for 16 hrs at 217 g. Neither an enhanced release of LDH nor an alteration of cell proliferation could be detected after centrifugation. However, the attachment of loaded gingival and periodontal ligament fibroblasts to all tested ECM components significantly decreased in comparison with controls (Wilcoxon-Mann-Whitney test; HGF, p < 0.05; HPDL, p < 0.01). Tenascin expression of mechanically stressed fibroblasts significantly increased in comparison with controls (p < 0.01).

Metabolic effects of dental resin components in vitro detected by NMR spectroscopy

Earlier studies have shown that the comonomer triethyleneglycol-dimethacrylate (TEGDMA) and the photostabilizer 2-hydroxy-4-methoxybenzophenone (HMBP) are cytotoxic and inhibit cell growth. It was the aim of this study to elucidate the underlying metabolic effects of TEGDMA and HMBP on immortal contact-inhibited Swiss albino mouse embryo cells (3T3 fibroblasts) by nuclear magnetic resonance (NMR) spectroscopy. Cell extracts and culture media were analyzed by NMR spectroscopy for metabolic changes after incubation for 24 hours with ED20-concentrations of TEGDMA and HMBP. TEGDMA could be detected in all fractions (cytosol, lipid fractions, and culture media) of 3T3 cells, while HMBP was found only in the lipid fraction accumulated at a maximum rate (51 nmol/mg DNA) compared with TEGDMA (27 nmol/mg DNA). TEGDMA increased the concentration of phosphomonoesters to 180+/-36% and decreased the phosphodiesters to 65+/-5% of controls (control = 100%). Thus, the turnover of phospholipids was enhanced, whereas content and composition of phospholipids of membranes did not alter markedly. Additionally, TEGDMA changed the metabolic state of cells, indicated by slight decreases of nucleoside triphosphates and an increase in the ratio of nucleoside diphosphates to nucleoside triphosphates, while HMBP had no effect. The most remarkable effect of TEGDMA was a nearly complete decline of the intracellular glutathione levels. Analysis of our data shows that NMR spectroscopy of cell-material interactions may reveal metabolic effects of organic test substances which are not detectable by standard in vitro assays. The comonomer TEGDMA affected the metabolism of the cells on different levels, while HMBP accumulated in the lipid fraction and induced significantly fewer effects on cell metabolism.