Cell-cycle control in cell-biomaterial interactions: expression of p53 and Ki67 in human umbilical vein endothelial cells in direct contact and extract testing of biomaterials

Local reaction to the different meshes at the vesicovaginal space in rabbit model

INTRODUCTION AND HYPOTHESIS

This paper aims to study the vesicovaginal space local tissue reaction to type I and II polypropylene mesh in a rabbit model.

METHODS

Different types of meshes were implanted into the rabbit vesicovaginal space. The animals were killed at days 7 and 60, and the initial implant and the neighboring host tissue were removed, including the bladder and vaginal wall. Histopathology and immunohistochemistry (Ki-67 and proliferating cell nuclear antigen) were performed to evaluate the cell proliferation, and the indirect local inflammatory response was described.

RESULTS

One rabbit had erosion at the urinary bladder mucous membrane, which resulted in vesical stone formation in the type I mesh group at day 60. Obvious local tissue reaction was found after the different types of meshes were implanted, and the reaction tapered and disappeared over time. At day 7, the reaction in the type I mesh group was stronger than that in the type II group, while at day 60, the reaction shows no difference.

CONCLUSION

The two types of meshes could induce local tissue reaction, but this was stronger in type I mesh group at day 7 and shows no obvious difference between the two groups at day 60.

Highly active antiretroviral therapy in patients infected with human immunodeficiency virus increases CD40 ligand expression and IL-12 production in cells ex vivo

Highly active anti-retroviral therapy (HAART) restores CD4(+) T-cell numbers in the periphery; however, its efficacy in restoring functional immunity is not fully elucidated. Here we evaluated longitudinal changes in the expression of several key markers of T-cell activation, namely CD40 ligand (CD154), OX40 (CD134), or CD69, after anti-CD3/CD28 activation, as well as levels of IL-12 production after Staphylococcus aureus Cowan stimulation in 28 HIV-infected adult patients. Patients were followed up to 12 mo post-HAART initiation. Viral burdens and CD4 cell counts were measured at the same time points. A control group of 15 HIV-uninfected adult subjects was included for comparison. Significant increases in CD40L and OX40 expression, but not of CD69 expression, were observed over time in the overall patient population, and more particularly in patients with baseline CD4 counts lower than or equal to 200 cells/μL, or those with baseline viral loads lower than or equal to 10(5) RNA copies/mL. Similar increases were seen for IL-12 production. Viral loads were inversely associated with CD40L expression or IL-12 production in a mixed linear model analysis, while CD4 counts were directly associated. CD40L expression and IL-12 production were significantly correlated. In conclusion, HAART-mediated control of viral replication led to partial restoration of CD40L upregulation/expression, and to increased IL-12 production, but the magnitude of the response depended on the baseline characteristics of the treated patients.

The underlying biological mechanisms of biocompatibility differences between bare and TiN-coated NiTi alloys

TiN coating has been demonstrated to improve the biocompatibility of bare NiTi alloys; however, essential biocompatibility differences between NiTi alloys before and after TiN coating are not known so far. In this study, to explore the underlying biological mechanisms of biocompatibility differences between them, the changes of bare and TiN-coated NiTi alloys in surface chemical composition, morphology, hydrophilicity, Ni ions release, cytotoxicity, apoptosis, and gene expression profiles were compared using energy-dispersive spectroscopy, scanning electron microscopy, contact angle, surface energy, Ni ions release analysis, the methylthiazoltetrazolium (MTT) method, flow cytometry and microarray methods, respectively. Pathways binding to networks and real-time polymerase chain reaction (PCR) were employed to analyze and validate the microarray data, respectively. It was found that, compared with the bare NiTi alloys, TiN coating significantly decreased Ni ions content on the surfaces of the NiTi alloys and reduced the release of Ni ions from the alloys, attenuated the inhibition of Ni ions to the expression of genes associated with anti-inflammatory, and also suppressed the promotion of Ni ions to the expression of apoptosis-related genes. Moreover, TiN coating distinctly improved the hydrophilicity and uniformity of the surfaces of the NiTi alloys, and contributed to the expression of genes participating in cell adhesion and other physiological activities. These results indicate that the TiN-coated NiTi alloys will help overcome the shortcomings of NiTi alloys used in clinical application currently, and can be expected to be a replacement of biomaterials for a medical device field.

In vitro biocompatibility evaluation of surface-modified titanium alloys

The present work is aimed to evaluate the effects of a surface modification process on the biocompatibility of three vanadium-free titanium alloys with biomedical applications interest. Chemical composition of alloys investigated, in weight %, were Ti-7Nb-6Al, Ti-13Nb-13Zr, and Ti-15Zr-4Nb. An easy and economic method intended to improve the biocompatibiblity of these materials consists in a simple thermal treatment at high temperature, 750 degrees C, in air for different times. The significance of modification of the surface properties to the biological response was studied putting in contact both untreated and thermally treated alloys with human cells in culture, Human Umbilical Vein Endothelial Cells (HUVEC) and Human Peripheral Blood Mononuclear Cells (PBMC). The TNF-alpha release data indicate that thermal treatment improves the biological response of the alloys. The notable enhancement of the surface roughness upon oxidation could be related with the observed reduction of the TNF-alpha levels for treated alloys. A different behavior of the two cell lines may be observed, when adhesion molecules (ICAM-1 and VCAM-1 in HUVEC, ICAM-1, and LFA-1 in PBMC) were determined, PBMC being more sensitive than HUVEC to the contact with the samples. The data also distinguish surface composition and corrosion resistance as significant parameters for the biological response.

In vitro behaviour of endothelial cells on a titanium surface

Background

Endothelial cells play an important role in the delivery of cells to the inflammation site, chemotaxis, cell adhesion and extravasation. Implantation of a foreign material into the human body determines inflammatory and repair reactions, involving different cell types with a plethora of released chemical mediators. The evaluation of the interaction of endothelial cells and implanted materials must take into account other parameters in addition to the analysis of maintenance of cell viability.

Methods

In the present investigation, we examined the behavior of human umbilical vein endothelial cells (HUVECs) harvested on titanium (Ti), using histological and immunohistochemical methods. The cells, after two passages, were seeded in a standard density on commercially plate-shaped titanium pieces, and maintained for 1, 7 or 14 days.

Results

After 14 days, we could observe a confluent monolayer of endothelial cells (ECs) on the titanium surface. Upon one-day Ti/cell contact the expression of fibronectin was predominantly cytoplasmatic and stronger than on the control surface. It was observed strong and uniform cell expression along the time of α5β1 integrin on the cells in contact with titanium.

Conclusion

The attachment of ECs on titanium was found to be related to cellular-derived fibronectin and the binding to its specific receptor, the α5β1 integrin. It was observed that titanium effectively serves as a suitable substrate for endothelial cell attachment, growth and proliferation. However, upon a 7-day contact with Ti, the Weibel-Palade bodies appeared to be not fully processed and exhibited an anomalous morphology, with corresponding alterations of PECAM-1 localization.

Cell type-specific aspects in biocompatibility testing: the intercellular contact in vitro as an indicator for endothelial cell compatibility

Endothelial cells cover the inner surface of blood vessels and form the interface between the blood and the tissues. Endothelial cells are involved in regulating barrier function, which is maintained by the interendothelial cell contacts. These interendothelial cell contacts are established by the interaction of different molecules. The maintenance of the barrier requires an appropriate signalling between these molecules. Thus, a number of different signalling pathways are integrated within interendothelial contacts. Since endothelial cells are important in tissue-implant interactions (especially for stent materials) this study examines the expression pattern of different interendothelial contact molecules to determine the usefulness in the analysis of biocompatibility in vitro. The effects of different pro-inflammatory and toxic stimuli and contact of human microvascular endothelial cells to metallic surfaces were examined for their impact on the pattern of interendothelial contact molecules. Striking modifications in the arrangement of these molecules were induced and the mode of modification was dependent on the tested compound. Thus, examining the pattern of expression of specific interendothelial contact molecules in vitro may be useful for testing the endothelial cell compatibility of biomaterials and their corrosion products.

In vitro genotoxicity tests for polyhydroxybutyrate – A synthetic biomaterial

The aims of this study are to determine the mutagenicity of a locally produced polyhydroxybutyrate (PHB) using Salmonella mutagenicity test and to find out if PHB altered the expression of p53 and c-myc proto-oncogenes and bcl-xl and bcl-xs anti-apoptotic genes in the human fibroblast cell line, MRC-5. Different concentrations of PHB were incubated with special genotypic variants of Salmonella strains (TA1535, TA1537, TA1538, TA98 and TA100) carrying mutations in several genes both with and without metabolic activation (S9) and the test was assessed based on the number of revertant colonies. The average number of revertant colonies per plate treated with PHB was less than double as compared to that of negative control. For the gene expression analyses, fibroblast cell lines were treated with PHB at different concentrations and incubated for 1, 12, 24 and 48 h separately. The total RNA was isolated and analysed for the expression of p53, c-myc, bcl-xl and bcl-xs genes. The PHB did not show over or under expression of the genes studied. The above tests indicate that the locally produced PHB is non-genotoxic and does not alter the expression of the proto-oncogenes and anti-apoptotic genes considered in this study.

Relationship between radial diffusion of copper ions released from a metal disk and cytotoxic effects. Comparison with results obtained using extracts

The extended use of metallic biomaterials yields to increasing sources of metal ions within the human body and may result in inflammation of the surrounding tissues, cell damage, and cancer. The aim of this study was to investigate the relationship between the radial diffusion of metal ions released from a metal disk by the corrosion process and the toxic effect on a cell line that grew around it. Results obtained with the metal disks (direct contact) were compared with assays made with extracts obtained from the dissolution of a metallic sample ex situ and then added to the cell culture to elucidate the cause of apparent inconsistencies in previous reports. The change of copper concentration due to corrosion and transient diffusion of copper ions from the copper disks into the cell line was evaluated according to Fick's 2nd law. Surviving cells distribution was interpreted considering the radial and time-dependence of copper concentration. We concluded that the toxic effect on those cells close to metallic biomaterials may be underestimated when only the extract methodology is employed for cytotoxic tests or when during the experiments with disks the presence of concentration gradients and the non-homogeneous distribution of dead cells are disregarded.

Polymers with tunable toxicity: a reference scale for cytotoxicity testing of biomaterial surfaces

A series of copolymers, with varying ratio di-methylamino-ethylmethacrylate (DMAEMA) and methyl-methacrylate (MMA), was designed as a potential scale for cytotoxicity. These copolymers were characterized for toxicity of their surface. The surfaces of washed copolymers display increasing toxicity with increasing DMAEMA content. The toxicity was observed for three different cell-types, namely mouse fibroblasts, human endothelial cells and human osteoblast-like cells. With an increasing toxic surface, cell growth was inhibited as was indicated by the proliferation marker Ki-67. Staining for F-actin revealed that with increasing DMAEMA, cells adopted a more and more round morphology, resulting in decreased surface-contact area. Immuno-staining for phospho-tyrosine or vinculin demonstrated gradual loss of focal adhesions on increasingly toxic surfaces. Surprisingly loss of focal adhesions coincided with an increase in paxillin and vinculin protein, indicating cells try compensating for loss of adhesion. This series of copolymers may have potential as a cytotoxicity scale. They provoke cellular responses ranging from highly toxic to completely non-toxic, with some showing intermediate toxicity.

Modulation of the human bone cell cycle by calcium ion-implantation of titanium

Ca ion implantation of Ti surfaces has previously been reported to enhances osseointegration in vivo. Although the mechanisms underlying the response of bone cells to these novel surfaces still remain unclear, it is possible that Ca ion-implanted Ti (Ca-Ti) may influence the growth of new bone by modulating the progression of the cell cycle. In the present study we have, therefore, examined the precise effects of Ca ion-implantation of Ti on the bone-like MG-63 cell line in vitro. The results of flow cytometry analysis showed that this surface markedly enhanced the proportion of cells which expressed Ki-67, a cell proliferation-associated nuclear antigen, compared with cells grown on the non-implanted Ti (control) surface. In addition, cultures grown on Ca-Ti and synchronized at the G1/S boundary by hydroxyurea more rapidly re-entered and progressed through the S and G2/M phases of the cell cycle than their counterparts on Ti. Ca ion-implantation also significantly increased the numbers of mitotic cells. These results thus show that alteration of the surface chemistry of Ti by high-energy implantation with Ca ion was able to substantially modulate the progression of the bone cell cycle, and suggest a possible means of enhancing the response of bone cells to implant materials.

Plasma-treated polystyrene surfaces: model surfaces for studying cell-biomaterial interactions

Biocompatibility of biomaterials relates, amongst others, to the absence of adverse cellular reactions and modulation of cell adhesion and subsequent responses. With respect to tissue-engineering applications, most materials need to evoke cell adhesion and spreading, while potentially displaying differential cell function. Adhesion has frequently been studied in a controlled fashion, using adhesion-supporting and -inhibiting substrata. The aim of this study is to create a panel of related materials with gradually changing surface characteristics in order to sustain similar individual cell adhesion and spreading, yet different cell population behaviour. A series of polystyrene materials was created with increasing oxygen surface incorporation and, concurrently, decreasing water-contact angles. Individual cells adhered and spread on all surfaces whilst showing well-developed focal adhesions and stress fibres. Cell populations demonstrated a decreased growth on surfaces with lower wettability. The biochemical activity of cell populations was not influenced by the surface treatment, but cell proliferation on surfaces increased with increasing oxygen incorporation. Furthermore, surface coverage with assembled fibronectin matrix was higher on the substrata with higher wettability. Finally, the expression of the adhesion-related proteins cadherin-5, focal adhesion kinase and RhoA was increased on surfaces with higher wettability. Further explorations of the cell biological basis of the observed differential behaviour will give more detailed answers on the rules governing cell-material interactions.

Influence of physicochemical reactions of bioactive glass on the behavior and activity of human osteoblastsin vitro

Bioactive glasses are characterized by a bond to bone with a hydroxyl carbonate apatite layer. They enhance bone tissue formation and for this purpose are used in orthopedic surgery and in dental implantology. In the current work, we studied the biological response of human osteoblasts with a bioactive glass. This bioactive glass is based on 50% Si0(2), 20% Na(2)O, 16% CaO, 6% P(2)O(5), 5% K(2)0, 2% Al(2)O(3) and 1% MgO and designated A9. Cracks and irregularities were observed on the material surface when it was immersed in the culture medium. In addition, energy dispersive X-ray analyses highlighted a selective release of the elements at the surface of the bioactive glass, such as Na(+) and K(+) ions, released from the first day, contrary to the Si, Al, Ca, P, and Mg elements, which were released more slowly. Cell proliferation kinetics, total protein synthesis, and DNA content of the osteoblasts in contact with bioactive glass were similar to control cells. The morphological studies by light and scanning electron microscopy revealed an increasing cellular density in culture with bioactive glass without contact inhibition. The immunohistochemical studies highlighted the expression of types I, III, and V collagens by osteoblasts cultured in the presence of bioactive glass. The pH measurement of the culture medium in the presence of bioactive glass demonstrated a slight alkalinization. We thus conclude that human osteoblasts preserve their properties in the presence of bioactive glass (A9).

Tissue response and biomaterial integration: the efficacy of in vitro methods

Implantation involves tissue trauma, which evokes an inflammatory response, coupled to a wound healing reaction, involving angiogenesis, fibroblast activation and matrix remodelling. Until now the type and extent of such reactions to give optimal integration of various biomaterials are practically unknown. Three principal fields of research can yield useful data to understand these phenomena better: studies on explanted biomaterials, animal models and relevant in vitro techniques. This paper will present examples of the latter field and the application of endothelial cell (EC) culture systems to study the effects of important tissue (e.g. pro-inflammatory cytokines, chemokines) and material (e.g. metal ions, particulate debris) factors on the regulation of the inflammatory and angiogenic response. A central feature is the use of microvascular endothelial cells (MEC), which can be used in both 2-and 3-dimensional (3-D) assays. We have also used genetic manipulation to develop a permanent MEC line from the human lung (HPMEC-ST1), which is being tested for its suitability to study cell-biomaterial interactions. In addition, suitable in vitro techniques are being developed in order to investigate drug delivery systems (DDS). Of particular interest is the targeting of the central nervous system, our approach being to establish a human model of the blood-brain barrier (BBB). A mainstay of our scientific philosophy is that such in vitro methods can make an important contribution to understanding biological reactions at the tissue-biomaterial interface and thus further a causal approach to tissue engineering (TE) and drug delivery applications.