Beds, overlays and mattresses for preventing and treating pressure ulcers: an overview of Cochrane Reviews and network meta-analysis

Pressure ulcer point prevalence, classification, locations, and preventive measures: Insights from a Norwegian nursing home survey

OBJECTIVE

To report data from a point pressure ulcer (PU) prevalence survey on prevalence, PU categories, locations and preventive interventions at one Norwegian nursing home.

METHODS

A cross-sectional research design was used. One nursing home in Norway participated in the prevalence survey in 2020. The data were collected on one selected day. A total of 74 out of 88 residents (84.1%) participated. Descriptive statistical analyses were run.

RESULTS

The overall prevalence of PUs was 27% amongst all participants in the nursing home, who together had a total of 57 PUs categorised as category I-III. One major finding was that the most common site of the PUs was on the residents' toes. Interestingly, the prevalence of PUs in the residents' sacrum was considerably low. The most frequently used PU preventive interventions were foam chair cushions, nutritional supplements and pressure-reducing heel protection.

CONCLUSION

This study identified a high prevalence of PUs, predominantly on residents' toes. Although preventive strategies were implemented, their application appeared limited. Implementing obligatory care packages and annual nationwide PU surveys might be worth considering in municipalities.

Treatment of severe pressure ulcers with protein-enriched filtered platelet-rich plasma (PEFPRP): a possible management

Background: Biological dressings with non-transfusion blood components are among the treatments available for pressure ulcers (PUs). Biological dressings contain active concentrated pro-regenerative molecules that can modify and switch off local inflammatory pathways. This re-establishes the physiological homing, which results in healing. In our study, we used a biological component obtained by ultrafiltration of plasma-platelet concentrate: protein-enriched filtered platelet-rich plasma (PEFPRP) with a higher platelet and higher plasma protein concentration. We tested whether treatment with PEFPRP could improve healing in advanced-stage pressure ulcers with a large surface area. All the patients in this study had a surgical indication but were not able to undergo surgery for various reasons. Materials and methods: Ten patients with severe neurological disability and advanced-stage sacral pressure ulcers were treated with allogenic PEFPRP. The mean lesion surface area at T0 was 13.4 cm2 ( ± 9.8 SD). PEFPRP was derived from allogenic plasma-platelet apheresis that had been pre-ultrafiltered with a ProSmart™ filter (Medica, Italy) to obtain a concentration after filtration of the plasma protein (12-16 g/dL) and platelet (1-1.2 x 106 microL). Results and Conclusion: All cases showed a reduction in the surface area of the pressure ulcer and in the Pressure Ulcer Scale for Healing (PUSH) score. The mean reduction values at week 6 were as follows: -52% for surface area and -21% for PUSH. Rapid wound healing is fundamental to avoid infections and improve patients' quality of life. This blood component builds new tissue by creating a new extracellular matrix. This, in turn, promotes rapid restoration of the three-dimensional structure of the tissue necessary for healing deeper wounds. PEFPRP shrinks the PU and improves its morphological features (reducing undermining and boosting granulation tissue). PEFPRP also promotes tissue restoration, obtaining an optimal scar. It is a safe and feasible treatment, and these preliminary results support the use of PEFPRP in the treatment of pressure ulcers. PEFPRP dressings could be integrated in the standard treatment of advanced-stage PU.

Nurses' barriers to the pressure ulcer risk assessment scales implementation: A phenomenological study

AIM

The aim of the study was to explore nurses' barriers to the pressure ulcer risk assessment scales implementation.

DESIGN

A qualitative descriptive phenomenological study.

METHODS

The research participants comprised of 10 nurses at various medical and surgical departments in a teaching hospital northeast of Namibia. Data were collected between August and September 2022 through in-depth, semi-structured face-to-face individual interviews and analysed using Colaizzi's 7-step method.

RESULTS

The interviews with nurses, led to two major themes being discovered: (1) factors hindering the effective prevention of pressure ulcers; (2) suggestions for improvements in the utilization of risk assessment scales. The participants noted that they had inadequate knowledge of the formal risk assessment scales; there were inadequate resources and insufficient staff; there were no policies or guidelines regarding the management of pressure ulcers, all of which influenced their utilization of pressure risk assessment scales. Education and training, the provision of equipment, the hiring of new staff and the formulation of policies/guidelines would thus improve the nurses' utilization of the scales.

CONCLUSION

The findings of this study have uncovered three primary factors that have a detrimental impact on the utilization of risk assessment scales by nurses, that is their lack knowledge on pressure ulcer risk assessment scales; a shortage of staff and equipment; and an absence of policies/guidelines. The findings from this study provide valuable implications for guiding quality improvement initiatives aimed at enhancing the standard of care in Namibia and other resource-limited settings.

Beds, overlays and mattresses for preventing and treating pressure ulcers: an overview of Cochrane Reviews and network meta-analysis

BACKGROUND

Pressure ulcers (also known as pressure injuries, pressure sores and bed sores) are localised injuries to the skin or underlying soft tissue, or both, caused by unrelieved pressure, shear or friction. Specific kinds of beds, overlays and mattresses are widely used with the aim of preventing and treating pressure ulcers.

OBJECTIVES

To summarise evidence from Cochrane Reviews that assess the effects of beds, overlays and mattresses on reducing the incidence of pressure ulcers and on increasing pressure ulcer healing in any setting and population. To assess the relative effects of different types of beds, overlays and mattresses for reducing the incidence of pressure ulcers and increasing pressure ulcer healing in any setting and population. To cumulatively rank the different treatment options of beds, overlays and mattresses in order of their effectiveness in pressure ulcer prevention and treatment.

METHODS

In July 2020, we searched the Cochrane Library. Cochrane Reviews reporting the effectiveness of beds, mattresses or overlays for preventing or treating pressure ulcers were eligible for inclusion in this overview. Two review authors independently screened search results and undertook data extraction and risk of bias assessment using the ROBIS tool. We summarised the reported evidence in an overview of reviews. Where possible, we included the randomised controlled trials from each included review in network meta-analyses. We assessed the relative effectiveness of beds, overlays and mattresses for preventing or treating pressure ulcers and their probabilities of being, comparably, the most effective treatment. We assessed the certainty of the evidence using the GRADE approach.

MAIN RESULTS

We include six Cochrane Reviews in this overview of reviews, all at low or unclear risk of bias. Pressure ulcer prevention: four reviews (of 68 studies with 18,174 participants) report direct evidence for 27 pairwise comparisons between 12 types of support surface on the following outcomes: pressure ulcer incidence, time to pressure ulcer incidence, patient comfort response, adverse event rates, health-related quality of life, and cost-effectiveness. Here we focus on outcomes with some evidence at a minimum of low certainty. (1) Pressure ulcer incidence: our overview includes direct evidence for 27 comparisons that mostly (19/27) have very low-certainty evidence concerning reduction of pressure ulcer risk. We included 40 studies (12,517 participants; 1298 participants with new ulcers) in a network meta-analysis involving 13 types of intervention. Data informing the network are sparse and this, together with the high risk of bias in most studies informing the network, means most network contrasts (64/78) yield evidence of very low certainty. There is low-certainty evidence that, compared with foam surfaces (reference treatment), reactive air surfaces (e.g. static air overlays) (risk ratio (RR) 0.46, 95% confidence interval (CI) 0.29 to 0.75), alternating pressure (active) air surfaces (e.g. alternating pressure air mattresses, large-celled ripple mattresses) (RR 0.63, 95% CI 0.42 to 0.93), and reactive gel surfaces (e.g. gel pads used on operating tables) (RR 0.47, 95% CI 0.22 to 1.01) may reduce pressure ulcer incidence. The ranking of treatments in terms of effectiveness is also of very low certainty for all interventions. It is unclear which treatment is best for preventing ulceration. (2) Time to pressure ulcer incidence: four reviews had direct evidence on this outcome for seven comparisons. We included 10 studies (7211 participants; 699 participants with new ulcers) evaluating six interventions in a network meta-analysis. Again, data from most network contrasts (13/15) are of very low certainty. There is low-certainty evidence that, compared with foam surfaces (reference treatment), reactive air surfaces may reduce the hazard of developing new pressure ulcers (hazard ratio (HR) 0.20, 95% CI 0.04 to 1.05). The ranking of all support surfaces for preventing pressure ulcers in terms of time to healing is uncertain. (3) Cost-effectiveness: this overview includes direct evidence for three comparisons. For preventing pressure ulcers, alternating pressure air surfaces are probably more cost-effective than foam surfaces (moderate-certainty evidence). Pressure ulcer treatment: two reviews (of 12 studies with 972 participants) report direct evidence for five comparisons on: complete pressure ulcer healing, time to complete pressure ulcer healing, patient comfort response, adverse event rates, and cost-effectiveness. Here we focus on outcomes with some evidence at a minimum of low certainty. (1) Complete pressure ulcer healing: our overview includes direct evidence for five comparisons. There is uncertainty about the relative effects of beds, overlays and mattresses on ulcer healing. The corresponding network meta-analysis (with four studies, 397 participants) had only three direct contrasts and a total of six network contrasts. Again, most network contrasts (5/6) have very low-certainty evidence. There was low-certainty evidence that more people with pressure ulcers may heal completely using reactive air surfaces than using foam surfaces (RR 1.32, 95% CI 0.96 to 1.80). We are uncertain which surfaces have the highest probability of being the most effective (all very low-certainty evidence). (2) Time to complete pressure ulcer healing: this overview includes direct evidence for one comparison: people using reactive air surfaces may be more likely to have healed pressure ulcers compared with those using foam surfaces in long-term care settings (HR 2.66, 95% CI 1.34 to 5.17; low-certainty evidence). (3) Cost-effectiveness: this overview includes direct evidence for one comparison: compared with foam surfaces, reactive air surfaces may cost an extra 26 US dollars for every ulcer-free day in the first year of use in long-term care settings (low-certainty evidence).

AUTHORS' CONCLUSIONS

Compared with foam surfaces, reactive air surfaces may reduce pressure ulcer risk and may increase complete ulcer healing. Compared with foam surfaces, alternating pressure air surfaces may reduce pressure ulcer risk and are probably more cost-effective in preventing pressure ulcers. Compared with foam surfaces, reactive gel surfaces may reduce pressure ulcer risk, particularly for people in operating rooms and long-term care settings. There are uncertainties for the relative effectiveness of other support surfaces for preventing and treating pressure ulcers, and their efficacy ranking. More high-quality research is required; for example, for the comparison of reactive air surfaces with alternating pressure air surfaces. Future studies should consider time-to-event outcomes and be designed to minimise any risk of bias.

Alternating pressure (active) air surfaces for preventing pressure ulcers

BACKGROUND

Pressure ulcers (also known as pressure injuries, pressure sores, decubitus ulcers and bed sores) are localised injuries to the skin or underlying soft tissue, or both, caused by unrelieved pressure, shear or friction. Alternating pressure (active) air surfaces are widely used with the aim of preventing pressure ulcers.

OBJECTIVES

To assess the effects of alternating pressure (active) air surfaces (beds, mattresses or overlays) compared with any support surface on the incidence of pressure ulcers in any population in any setting.

SEARCH METHODS

In November 2019, we searched the Cochrane Wounds Specialised Register; the Cochrane Central Register of Controlled Trials (CENTRAL); Ovid MEDLINE (including In-Process & Other Non-Indexed Citations); Ovid Embase and EBSCO CINAHL Plus. We also searched clinical trials registries for ongoing and unpublished studies, and scanned reference lists of relevant included studies as well as reviews, meta-analyses and health technology reports to identify additional studies. There were no restrictions with respect to language, date of publication or study setting.

SELECTION CRITERIA

We included randomised controlled trials that allocated participants of any age to alternating pressure (active) air beds, overlays or mattresses. Comparators were any beds, overlays or mattresses.

DATA COLLECTION AND ANALYSIS

At least two review authors independently assessed studies using predetermined inclusion criteria. We carried out data extraction, 'Risk of bias' assessment using the Cochrane 'Risk of bias' tool, and the certainty of the evidence assessment according to Grading of Recommendations, Assessment, Development and Evaluations methodology.

MAIN RESULTS

We included 32 studies (9058 participants) in the review. Most studies were small (median study sample size: 83 participants). The average age of participants ranged from 37.2 to 87.0 years (median: 69.1 years). Participants were largely from acute care settings (including accident and emergency departments). We synthesised data for six comparisons in the review: alternating pressure (active) air surfaces versus: foam surfaces, reactive air surfaces, reactive water surfaces, reactive fibre surfaces, reactive gel surfaces used in the operating room followed by foam surfaces used on the ward bed, and another type of alternating pressure air surface. Of the 32 included studies, 25 (78.1%) presented findings which were considered at high overall risk of bias.

PRIMARY OUTCOME

pressure ulcer incidence Alternating pressure (active) air surfaces may reduce the proportion of participants developing a new pressure ulcer compared with foam surfaces (risk ratio (RR) 0.63, 95% confidence interval (CI) 0.34 to 1.17; I² = 63%; 4 studies, 2247 participants; low-certainty evidence). Alternating pressure (active) air surfaces applied on both operating tables and hospital beds may reduce the proportion of people developing a new pressure ulcer compared with reactive gel surfaces used on operating tables followed by foam surfaces applied on hospital beds (RR 0.22, 95% CI 0.06 to 0.76; I² = 0%; 2 studies, 415 participants; low-certainty evidence). It is uncertain whether there is a difference in the proportion of people developing new pressure ulcers between alternating pressure (active) air surfaces and the following surfaces, as all these comparisons have very low-certainty evidence: (1) reactive water surfaces; (2) reactive fibre surfaces; and (3) reactive air surfaces. The comparisons between different types of alternating pressure air surfaces are presented narratively. Overall, all comparisons suggest little to no difference between these surfaces in pressure ulcer incidence (7 studies, 2833 participants; low-certainty evidence). Included studies have data on time to pressure ulcer incidence for three comparisons. When time to pressure ulcer development is considered using a hazard ratio (HR), it is uncertain whether there is a difference in the risk of developing new pressure ulcers, over 90 days' follow-up, between alternating pressure (active) air surfaces and foam surfaces (HR 0.41, 95% CI 0.10 to 1.64; I² = 86%; 2 studies, 2105 participants; very low-certainty evidence). For the comparison with reactive air surfaces, there is low-certainty evidence that people treated with alternating pressure (active) air surfaces may have a higher risk of developing an incident pressure ulcer than those treated with reactive air surfaces over 14 days' follow-up (HR 2.25, 95% CI 1.05 to 4.83; 1 study, 308 participants). Neither of the two studies with time to ulcer incidence data suggested a difference in the risk of developing an incident pressure ulcer over 60 days' follow-up between different types of alternating pressure air surfaces. Secondary outcomes The included studies have data on (1) support-surface-associated patient comfort for comparisons involving foam surfaces, reactive air surfaces, reactive fibre surfaces and alternating pressure (active) air surfaces; (2) adverse events for comparisons involving foam surfaces, reactive gel surfaces and alternating pressure (active) air surfaces; and (3) health-related quality of life outcomes for the comparison involving foam surfaces. However, all these outcomes and comparisons have low or very low-certainty evidence and it is uncertain whether there are any differences in these outcomes. Included studies have data on cost effectiveness for two comparisons. Moderate-certainty evidence suggests that alternating pressure (active) air surfaces are probably more cost-effective than foam surfaces (1 study, 2029 participants) and that alternating pressure (active) air mattresses are probably more cost-effective than overlay versions of this technology for people in acute care settings (1 study, 1971 participants).

AUTHORS' CONCLUSIONS

Current evidence is uncertain about the difference in pressure ulcer incidence between using alternating pressure (active) air surfaces and other surfaces (reactive water surfaces, reactive fibre surfaces and reactive air surfaces). Alternating pressure (active) air surfaces may reduce pressure ulcer risk compared with foam surfaces and reactive gel surfaces used on operating tables followed by foam surfaces applied on hospital beds. People using alternating pressure (active) air surfaces may be more likely to develop new pressure ulcers over 14 days' follow-up than those treated with reactive air surfaces in the nursing home setting; but as the result is sensitive to the choice of outcome measure it should be interpreted cautiously. Alternating pressure (active) air surfaces are probably more cost-effective than reactive foam surfaces in preventing new pressure ulcers. Future studies should include time-to-event outcomes and assessment of adverse events and trial-level cost-effectiveness. Further review using network meta-analysis will add to the findings reported here.

Beds, overlays and mattresses for treating pressure ulcers

BACKGROUND

Pressure ulcers (also known as pressure injuries, pressure sores, decubitus ulcers and bed sores) are localised injuries to the skin or underlying soft tissue, or both, caused by unrelieved pressure, shear or friction. Beds, overlays or mattresses are widely used with the aim of treating pressure ulcers.

OBJECTIVES

To assess the effects of beds, overlays and mattresses on pressure ulcer healing in people with pressure ulcers of any stage, in any setting.

SEARCH METHODS

In November 2019, we searched the Cochrane Wounds Specialised Register; the Cochrane Central Register of Controlled Trials (CENTRAL); Ovid MEDLINE (including In-Process & Other Non-Indexed Citations); Ovid Embase and EBSCO CINAHL Plus. We also searched clinical trials registries for ongoing and unpublished studies, and scanned reference lists of relevant included studies as well as reviews, meta-analyses and health technology reports to identify additional studies. There were no restrictions with respect to language, date of publication or study setting.

SELECTION CRITERIA

We included randomised controlled trials that allocated participants of any age to pressure-redistributing beds, overlays or mattresses. Comparators were any beds, overlays or mattresses that were applied for treating pressure ulcers.

DATA COLLECTION AND ANALYSIS

At least two review authors independently assessed studies using predetermined inclusion criteria. We carried out data extraction, 'Risk of bias' assessment using the Cochrane 'Risk of bias' tool, and the certainty of the evidence assessment according to Grading of Recommendations, Assessment, Development and Evaluations methodology.

MAIN RESULTS

We included 13 studies (972 participants) in the review. Most studies were small (median study sample size: 72 participants). The average age of participants ranged from 64.0 to 86.5 years (median: 82.7 years) and all studies recruited people with existing pressure ulcers (the baseline ulcer area size ranging from 4.2 to 18.6 cm²,median 6.6 cm²). Participants were recruited from acute care settings (six studies) and community and long-term care settings (seven studies). Of the 13 studies, three (224 participants) involved surfaces that were not well described and therefore could not be classified. Additionally, six (46.2%) of the 13 studies presented findings which were considered at high overall risk of bias. We synthesised data for four comparisons in the review: alternating pressure (active) air surfaces versus foam surfaces; reactive air surfaces versus foam surfaces; reactive water surfaces versus foam surfaces, and a comparison between two types of alternating pressure (active) air surfaces. We summarise key findings for these four comparisons below. (1) Alternating pressure (active) air surfaces versus foam surfaces: we are uncertain if there is a difference between alternating pressure (active) air surfaces and foam surfaces in the proportion of participants whose pressure ulcers completely healed (two studies with 132 participants; the reported risk ratio (RR) in one study was 0.97, 95% confidence interval (CI) 0.26 to 3.58). There is also uncertainty for the outcomes of patient comfort (one study with 83 participants) and adverse events (one study with 49 participants). These outcomes have very low-certainty evidence. Included studies did not report time to complete ulcer healing, health-related quality of life, or cost effectiveness. (2) Reactive air surfaces versus foam surfaces: it is uncertain if there is a difference in the proportion of participants with completely healed pressure ulcers between reactive air surfaces and foam surfaces (RR 1.32, 95% CI 0.96 to 1.80; I² = 0%; 2 studies, 156 participants; low-certainty evidence). When time to complete pressure ulcer healing is considered using a hazard ratio, data from one small study (84 participants) suggests a greater hazard for complete ulcer healing on reactive air surfaces (hazard ratio 2.66, 95% CI 1.34 to 5.17; low-certainty evidence). These results are sensitive to the choice of outcome measure so should be interpreted as uncertain. We are also uncertain whether there is any difference between these surfaces in patient comfort responses (1 study, 72 participants; very low-certainty evidence) and in adverse events (2 studies, 156 participants; low-certainty evidence). There is low-certainty evidence that reactive air surfaces may cost an extra 26 US dollars for every ulcer-free day in the first year of use (1 study, 87 participants). Included studies did not report health-related quality of life. (3) Reactive water surfaces versus foam surfaces: it is uncertain if there is a difference between reactive water surfaces and foam surfaces in the proportion of participants with healed pressure ulcers (RR 1.07, 95% CI 0.70 to 1.63; 1 study, 101 participants) and in adverse events (1 study, 120 participants). All these have very low-certainty evidence. Included studies did not report time to complete ulcer healing, patient comfort, health-related quality of life, or cost effectiveness. (4) Comparison between two types of alternating pressure (active) air surfaces: it is uncertain if there is a difference between Nimbus and Pegasus alternating pressure (active) air surfaces in the proportion of participants with healed pressure ulcers, in patient comfort responses and in adverse events: each of these outcomes had four studies (256 participants) but very low-certainty evidence. Included studies did not report time to complete ulcer healing, health-related quality of life, or cost effectiveness.

AUTHORS' CONCLUSIONS

We are uncertain about the relative effects of most different pressure-redistributing surfaces for pressure ulcer healing (types directly compared are alternating pressure air surfaces versus foam surfaces, reactive air surfaces versus foam surfaces, reactive water surfaces versus foam surfaces, and Nimbus versus Pegasus alternating pressure (active) air surfaces). There is also uncertainty regarding the effects of these different surfaces on the outcomes of comfort and adverse events. However, people using reactive air surfaces may be more likely to have pressure ulcers completely healed than those using foam surfaces over 37.5 days' follow-up, and reactive air surfaces may cost more for each ulcer-free day than foam surfaces. Future research in this area could consider the evaluation of alternating pressure air surfaces versus foam surfaces as a high priority. Time-to-event outcomes, careful assessment of adverse events and trial-level cost-effectiveness evaluation should be considered in future studies. Further review using network meta-analysis will add to the findings reported here.

Reactive air surfaces for preventing pressure ulcers

BACKGROUND

Pressure ulcers (also known as pressure injuries, pressure sores, decubitus ulcers and bed sores) are localised injuries to the skin or underlying soft tissue, or both, caused by unrelieved pressure, shear or friction. Reactive air surfaces (beds, mattresses or overlays) can be used for preventing pressure ulcers.

OBJECTIVES

To assess the effects of reactive air beds, mattresses or overlays compared with any support surface on the incidence of pressure ulcers in any population in any setting.

SEARCH METHODS

In November 2019, we searched the Cochrane Wounds Specialised Register; the Cochrane Central Register of Controlled Trials (CENTRAL); Ovid MEDLINE (including In-Process & Other Non-Indexed Citations); Ovid Embase and EBSCO CINAHL Plus. We also searched clinical trials registries for ongoing and unpublished studies, and scanned reference lists of relevant included studies as well as reviews, meta-analyses and health technology reports to identify additional studies. There were no restrictions with respect to language, date of publication or study setting.

SELECTION CRITERIA

We included randomised controlled trials that allocated participants of any age to reactive air beds, overlays or mattresses. Comparators were any beds, overlays or mattresses that were applied for preventing pressure ulcers.

DATA COLLECTION AND ANALYSIS

At least two review authors independently assessed studies using predetermined inclusion criteria. We carried out data extraction, 'Risk of bias' assessment using the Cochrane 'Risk of bias' tool, and the certainty of the evidence assessment according to Grading of Recommendations, Assessment, Development and Evaluations methodology. If a reactive air surface was compared with surfaces that were not clearly specified, then we recorded and described the concerned study but did not included it in further data analyses.

MAIN RESULTS

We included 17 studies (2604 participants) in this review. Most studies were small (median study sample size: 83 participants). The average participant age ranged from 56 to 87 years (median: 72 years). Participants were recruited from a wide range of care settings with the majority being acute care settings. Almost all studies were conducted in the regions of Europe and America. Of the 17 included studies, two (223 participants) compared reactive air surfaces with surfaces that were not well described and therefore could not be classified. We analysed data for five comparisons: reactive air surfaces compared with (1) alternating pressure (active) air surfaces (seven studies with 1728 participants), (2) foam surfaces (four studies with 229 participants), (3) reactive water surfaces (one study with 37 participants), (4) reactive gel surfaces (one study with 66 participants), and (5) another type of reactive air surface (two studies with 223 participants). Of the 17 studies, seven (41.2%) presented findings which were considered at high overall risk of bias.

PRIMARY OUTCOME

Pressure ulcer incidence Reactive air surfaces may reduce the proportion of participants developing a new pressure ulcer compared with foam surfaces (risk ratio (RR) 0.42; 95% confidence interval (CI) 0.18 to 0.96; I² = 25%; 4 studies, 229 participants; low-certainty evidence). It is uncertain if there is a difference in the proportions of participants developing a new pressure ulcer on reactive air surfaces compared with: alternating pressure (active) air surfaces (6 studies, 1648 participants); reactive water surfaces (1 study, 37 participants); reactive gel surfaces (1 study, 66 participants), or another type of reactive air surface (2 studies, 223 participants). Evidence for all these comparisons is of very low certainty. Included studies have data on time to pressure ulcer incidence for two comparisons. When time to pressure ulcer incidence is considered using a hazard ratio (HR), low-certainty evidence suggests that in the nursing home setting, people on reactive air surfaces may be less likely to develop a new pressure ulcer over 14 days' of follow-up than people on alternating pressure (active) air surfaces (HR 0.44; 95% CI 0.21 to 0.96; 1 study, 308 participants). It is uncertain if there is a difference in the hazard of developing new pressure ulcers between two types of reactive air surfaces (1 study, 123 participants; very low-certainty evidence). Secondary outcomes Support-surface-associated patient comfort: the included studies have data on this outcome for three comparisons. We could not pool any data as comfort outcome measures differed between included studies; therefore a narrative summary is provided. It is uncertain if there is a difference in patient comfort responses between reactive air surfaces and foam surfaces over the top of an alternating pressure (active) air surfaces (1 study, 72 participants), and between those using reactive air surfaces and those using alternating pressure (active) air surfaces (4 studies, 1364 participants). Evidence for these two comparisons is of very low certainty. It is also uncertain if there is a difference in patient comfort responses between two types of reactive air surfaces (1 study, 84 participants; low-certainty evidence). All reported adverse events: there were data on this outcome for one comparison: it is uncertain if there is a difference in adverse events between reactive air surfaces and foam surfaces (1 study, 72 participants; very low-certainty evidence). The included studies have no data for health-related quality of life and cost-effectiveness for all five comparisons.

AUTHORS' CONCLUSIONS

Current evidence is uncertain regarding any differences in the relative effects of reactive air surfaces on ulcer incidence and patient comfort, when compared with reactive water surfaces, reactive gel surfaces, or another type of reactive air surface. Using reactive air surfaces may reduce the risk of developing new pressure ulcers compared with using foam surfaces. Also, using reactive air surfaces may reduce the risk of developing new pressure ulcers within 14 days compared with alternating pressure (active) air surfaces in people in a nursing home setting. Future research in this area should consider evaluation of the most important support surfaces from the perspective of decision-makers. Time-to-event outcomes, careful assessment of adverse events and trial-level cost-effectiveness evaluation should be considered in future studies. Trials should be designed to minimise the risk of detection bias; for example, by using digital photography and adjudicators of the photographs being blinded to group allocation. Further review using network meta-analysis will add to the findings reported here.

Alternative reactive support surfaces (non-foam and non-air-filled) for preventing pressure ulcers

BACKGROUND

Pressure ulcers (also known as injuries, pressure sores, decubitus ulcers and bed sores) are localised injuries to the skin or underlying soft tissue, or both, caused by unrelieved pressure, shear or friction. Reactive surfaces that are not made of foam or air cells can be used for preventing pressure ulcers.

OBJECTIVES

To assess the effects of non-foam and non-air-filled reactive beds, mattresses or overlays compared with any other support surface on the incidence of pressure ulcers in any population in any setting.

SEARCH METHODS

In November 2019, we searched the Cochrane Wounds Specialised Register; the Cochrane Central Register of Controlled Trials (CENTRAL); Ovid MEDLINE (including In-Process & Other Non-Indexed Citations); Ovid Embase and EBSCO CINAHL Plus. We also searched clinical trials registries for ongoing and unpublished studies, and scanned reference lists of relevant included studies as well as reviews, meta-analyses and health technology reports to identify additional studies. There were no restrictions with respect to language, date of publication or study setting.

SELECTION CRITERIA

We included randomised controlled trials that allocated participants of any age to non-foam or non-air-filled reactive beds, overlays or mattresses. Comparators were any beds, overlays or mattresses used.

DATA COLLECTION AND ANALYSIS

At least two review authors independently assessed studies using predetermined inclusion criteria. We carried out data extraction, 'Risk of bias' assessment using the Cochrane 'Risk of bias' tool, and the certainty of the evidence assessment according to Grading of Recommendations, Assessment, Development and Evaluations methodology. If a non-foam or non-air-filled surface was compared with surfaces that were not clearly specified, then the included study was recorded and described but not considered further in any data analyses.

MAIN RESULTS

We included 20 studies (4653 participants) in this review. Most studies were small (median study sample size: 198 participants). The average participant age ranged from 37.2 to 85.4 years (median: 72.5 years). Participants were recruited from a wide range of care settings but were mainly from acute care settings. Almost all studies were conducted in Europe and America. Of the 20 studies, 11 (2826 participants) included surfaces that were not well described and therefore could not be fully classified. We synthesised data for the following 12 comparisons: (1) reactive water surfaces versus alternating pressure (active) air surfaces (three studies with 414 participants), (2) reactive water surfaces versus foam surfaces (one study with 117 participants), (3) reactive water surfaces versus reactive air surfaces (one study with 37 participants), (4) reactive water surfaces versus reactive fibre surfaces (one study with 87 participants), (5) reactive fibre surfaces versus alternating pressure (active) air surfaces (four studies with 384 participants), (6) reactive fibre surfaces versus foam surfaces (two studies with 228 participants), (7) reactive gel surfaces on operating tables followed by foam surfaces on ward beds versus alternating pressure (active) air surfaces on operating tables and subsequently on ward beds (two studies with 415 participants), (8) reactive gel surfaces versus reactive air surfaces (one study with 74 participants), (9) reactive gel surfaces versus foam surfaces (one study with 135 participants), (10) reactive gel surfaces versus reactive gel surfaces (one study with 113 participants), (11) reactive foam and gel surfaces versus reactive gel surfaces (one study with 166 participants) and (12) reactive foam and gel surfaces versus foam surfaces (one study with 91 participants). Of the 20 studies, 16 (80%) presented findings which were considered to be at high overall risk of bias.

PRIMARY OUTCOME

Pressure ulcer incidence We did not find analysable data for two comparisons: reactive water surfaces versus foam surfaces, and reactive water surfaces versus reactive fibre surfaces. Reactive gel surfaces used on operating tables followed by foam surfaces applied on hospital beds (14/205 (6.8%)) may increase the proportion of people developing a new pressure ulcer compared with alternating pressure (active) air surfaces applied on both operating tables and hospital beds (3/210 (1.4%) (risk ratio 4.53, 95% confidence interval 1.31 to 15.65; 2 studies, 415 participants; I² = 0%; low-certainty evidence). For all other comparisons, it is uncertain whether there is a difference in the proportion of participants developing new pressure ulcers as all data were of very low certainty. Included studies did not report time to pressure ulcer incidence for any comparison in this review. Secondary outcomes Support-surface-associated patient comfort: the included studies provide data on this outcome for one comparison. It is uncertain if there is a difference in patient comfort between alternating pressure (active) air surfaces and reactive fibre surfaces (one study with 187 participants; very low-certainty evidence). All reported adverse events: there is evidence on this outcome for one comparison. It is uncertain if there is a difference in adverse events between reactive gel surfaces followed by foam surfaces and alternating pressure (active) air surfaces applied on both operating tables and hospital beds (one study with 198 participants; very low-certainty evidence). We did not find any health-related quality of life or cost-effectiveness evidence for any comparison in this review.

AUTHORS' CONCLUSIONS

Current evidence is generally uncertain about the differences between non-foam and non-air-filled reactive surfaces and other surfaces in terms of pressure ulcer incidence, patient comfort, adverse effects, health-related quality of life and cost-effectiveness. Reactive gel surfaces used on operating tables followed by foam surfaces applied on hospital beds may increase the risk of having new pressure ulcers compared with alternating pressure (active) air surfaces applied on both operating tables and hospital beds. Future research in this area should consider evaluation of the most important support surfaces from the perspective of decision-makers. Time-to-event outcomes, careful assessment of adverse events and trial-level cost-effectiveness evaluation should be considered in future studies. Trials should be designed to minimise the risk of detection bias; for example, by using digital photography and adjudicators of the photographs being blinded to group allocation. Further review using network meta-analysis will add to the findings reported here.

Foam surfaces for preventing pressure ulcers

BACKGROUND

Pressure ulcers (also known as pressure injuries) are localised injuries to the skin or underlying soft tissue, or both, caused by unrelieved pressure, shear or friction. Foam surfaces (beds, mattresses or overlays) are widely used with the aim of preventing pressure ulcers.

OBJECTIVES

To assess the effects of foam beds, mattresses or overlays compared with any support surface on the incidence of pressure ulcers in any population in any setting.

SEARCH METHODS

In November 2019, we searched the Cochrane Wounds Specialised Register; the Cochrane Central Register of Controlled Trials (CENTRAL); Ovid MEDLINE (including In-Process & Other Non-Indexed Citations); Ovid Embase and EBSCO CINAHL Plus. We also searched clinical trials registries for ongoing and unpublished studies, and scanned reference lists of relevant included studies as well as reviews, meta-analyses and health technology reports to identify additional studies. There were no restrictions with respect to language, date of publication or study setting.

SELECTION CRITERIA

We included randomised controlled trials that allocated participants of any age to foam beds, mattresses or overlays. Comparators were any beds, mattresses or overlays.

DATA COLLECTION AND ANALYSIS

At least two review authors independently assessed studies using predetermined inclusion criteria. We carried out data extraction, 'Risk of bias' assessment using the Cochrane 'Risk of bias' tool, and the certainty of the evidence assessment according to Grading of Recommendations, Assessment, Development and Evaluations methodology. If a foam surface was compared with surfaces that were not clearly specified, then the included study was recorded and described but not considered further in any data analyses.

MAIN RESULTS

We included 29 studies (9566 participants) in the review. Most studies were small (median study sample size: 101 participants). The average age of participants ranged from 47.0 to 85.3 years (median: 76.0 years). Participants were mainly from acute care settings. We analysed data for seven comparisons in the review: foam surfaces compared with: (1) alternating pressure air surfaces, (2) reactive air surfaces, (3) reactive fibre surfaces, (4) reactive gel surfaces, (5) reactive foam and gel surfaces, (6) reactive water surfaces, and (7) another type of foam surface. Of the 29 included studies, 17 (58.6%) presented findings which were considered at high overall risk of bias.

PRIMARY OUTCOME

pressure ulcer incidence Low-certainty evidence suggests that foam surfaces may increase the risk of developing new pressure ulcers compared with (1) alternating pressure (active) air surfaces (risk ratio (RR) 1.59, 95% confidence interval (CI) 0.86 to 2.95; I2 = 63%; 4 studies, 2247 participants), and (2) reactive air surfaces (RR 2.40, 95% CI 1.04 to 5.54; I2 = 25%; 4 studies, 229 participants). We are uncertain regarding the difference in pressure ulcer incidence in people treated with foam surfaces and the following surfaces: (1) reactive fibre surfaces (1 study, 68 participants); (2) reactive gel surfaces (1 study, 135 participants); (3) reactive gel and foam surfaces (1 study, 91 participants); and (4) another type of foam surface (6 studies, 733 participants). These had very low-certainty evidence. Included studies have data on time to pressure ulcer development for two comparisons. When time to ulcer development is considered using hazard ratios, the difference in the risk of having new pressure ulcers, over 90 days' follow-up, between foam surfaces and alternating pressure air surfaces is uncertain (2 studies, 2105 participants; very low-certainty evidence). Two further studies comparing different types of foam surfaces also reported time-to-event data, suggesting that viscoelastic foam surfaces with a density of 40 to 60 kg/m3 may decrease the risk of having new pressure ulcers over 11.5 days' follow-up compared with foam surfaces with a density of 33 kg/m3 (1 study, 62 participants); and solid foam surfaces may decrease the risk of having new pressure ulcers over one month's follow-up compared with convoluted foam surfaces (1 study, 84 participants). Both had low-certainty evidence. There was no analysable data for the comparison of foam surfaces with reactive water surfaces (one study with 117 participants). Secondary outcomes Support-surface-associated patient comfort: the review contains data for three comparisons for this outcome. It is uncertain if there is a difference in patient comfort measure between foam surfaces and alternating pressure air surfaces (1 study, 76 participants; very low-certainty evidence); foam surfaces and reactive air surfaces (1 study, 72 participants; very low-certainty evidence); and different types of foam surfaces (4 studies, 669 participants; very low-certainty evidence). All reported adverse events: the review contains data for two comparisons for this outcome. We are uncertain about differences in adverse effects between foam surfaces and alternating pressure (active) air surfaces (3 studies, 2181 participants; very low-certainty evidence), and between foam surfaces and reactive air surfaces (1 study, 72 participants; very low-certainty evidence). Health-related quality of life: only one study reported data on this outcome. It is uncertain if there is a difference (low-certainty evidence) between foam surfaces and alternating pressure (active) air surfaces in health-related quality of life measured with two different questionnaires, the EQ-5D-5L (267 participants) and the PU-QoL-UI (233 participants). Cost-effectiveness: one study reported trial-based cost-effectiveness evaluations. Alternating pressure (active) air surfaces are probably more cost-effective than foam surfaces in preventing pressure ulcer incidence (2029 participants; moderate-certainty evidence).

AUTHORS' CONCLUSIONS

Current evidence suggests uncertainty about the differences in pressure ulcer incidence, patient comfort, adverse events and health-related quality of life between using foam surfaces and other surfaces (reactive fibre surfaces, reactive gel surfaces, reactive foam and gel surfaces, or reactive water surfaces). Foam surfaces may increase pressure ulcer incidence compared with alternating pressure (active) air surfaces and reactive air surfaces. Alternating pressure (active) air surfaces are probably more cost-effective than foam surfaces in preventing new pressure ulcers. Future research in this area should consider evaluation of the most important support surfaces from the perspective of decision-makers. Time-to-event outcomes, careful assessment of adverse events and trial-level cost-effectiveness evaluation should be considered in future studies. Trials should be designed to minimise the risk of detection bias; for example, by using digital photography and by blinding adjudicators of the photographs to group allocation. Further review using network meta-analysis will add to the findings reported here.