Recent advances in capillary electrophoresis and capillary electrochromatography of pollutants

A specific, robust, and automated method for routine at-line monitoring of the concentration of cellulases in genetically modified sugarcane plants

Bagasse is one of the waste crop materials highlighted as commercially viable for cellulosic bio-ethanol production via enzymatic conversion to release fermentable sugars. Genetically modified sugarcane expressing cellobiohydrolases (CBH), endoglucanase (EG), and β-glucosidases (BG) provide a more cost-effective route to cellulose breakdown compared to culturing these enzymes in microbial tanks. Hence, process monitoring of the concentration profile of these key cellulases in incoming batches of sugarcane is required for fiscal measures and bio-ethanol process control. The existing methods due to their non-specificity, requirement of trained analysts, low sample throughput, and low amenability to automation are unsuitable for this purpose. Therefore, this paper explores a membrane-based sample preparation method coupled to capillary zone electrophoresis (CZE) to quantify these enzymes. The maximum enzyme extraction efficiency was obtained by using a polyethersulfone membrane with molecular cut-off of 10 kDa. The use of 15 mM, pH 7.75, phosphate buffer resulted in CZE separation and quantification of CBH, EG, and BG within 10 min. Migration time reproducibility was between 0.56% and 0.7% and hence, suitable for use with automatic peak detection software. Therefore, the developed CZE method is suitable for at-line analysis of BG, CBH, and EG in every batch of harvested sugarcane.

Analysis of triazolopyrimidine herbicides in soils using field-enhanced sample injection-coelectroosmotic capillary electrophoresis combined with solid-phase extraction

In this work, a combined methodology using off-line solid-phase extraction (SPE), on-line field-enhanced sample injection (FESI) and coelectroosmotic capillary electrophoresis with UV detection (CE-UV) is developed for the trace analysis of five triazolopyrimidine sulfonanilide pesticides (i.e., flumetsulam, florasulam, cloransulam-methyl, diclosulam and metosulam). An adequate background electrolyte (BGE) was obtained for the separation of these pesticides using hexadimethrine bromide (HDB) as electroosmotic flow (EOF) modifier. This BGE consisted of 0.00042% HDB, 11 mM formic acid, 16 mM ammonium carbonate and 2.5 mM alpha-CD solution at pH 7.6. The use of this running buffer together with the FESI preconcentration method provided limits of detection (LODs) in the low microg/L range (i.e., between 13.0 and 31.5 microg/L). The optimized FESI-CE-UV method was combined with off-line SPE using C(18) cartridges and applied to the determination of the selected group of pesticides in soil samples. Recovery percentages ranged between 50 and 84% in these samples with LODs between 18 and 34 microg/kg. This work shows the great possibilities of the combined use of SPE-FESI-CE-UV to improve CE sensitivity allowing the achievement of LODs similar to other analytical techniques as GC or HPLC.

Capillary electrochromatography of caffeine and its metabolites in rat brain microdialysate

A capillary electrochromatography (CEC) method has been developed for the separation of caffeine and its two metabolites 1-methylxanthine (1-MX) and 1,7-dimethylxanthine (1,7-DX). The stationary phase was 3-(1,8-naphthalimido) propyl-modified silyl silica gel (NAIP) and the best separations were achieved with 4.0 mM citrate buffer (pH 5.0) containing 80% methanol at an applied voltage of 25 kV. The compounds were completely separated in less than 3.5 min with good repeatability, which was approximately 3-times less than that in high-performance liquid chromatography (HPLC) with NAIP. The proposed method coupled with microdialysis was successfully applied to the monitoring of caffeine concentration in rat brain with detection limits of 1.11 microg/mL.

Pesticide analysis by capillary electrophoresis

In this work, a critical and updated revision of the current situation of the analysis of pesticides by Capillary Electrophoresis (CE) is presented. The review has been written in two main sections. The first one presents a thorough revision of the various offline and on-line sample preconcentration procedures that have been used in conjunction with CE to analyze these compounds. The second part reviews the various detection strategies (i.e., UV, LIF, MS, and electrochemical) and CE modes that have been applied to the analysis of pesticides. Future trends that can be expected from this hot research area are also discussed.

Analysis of liquid extracts from tree and grass pollens by capillary electromigration methods

Capillary electromigration methods, zone electrophoresis (CZE), micellar electrokinetic chromatography (CMEKC) and isotachophoresis (CITP), have been used for analysis of water and water-buffer extracts from tree-common birch (Betula verrucosa) and grass-orchardgrass (Dactylis glomerata) pollen samples. Water extracts were analyzed by CZE using acetic acid as background electrolyte (BGE), by CMEKC in tris-phosphate BGE with anionic detergent sodium dodecyl sulfate (SDS) micellar pseudophase (TP-SDS) and by CITP in cationic mode with leading/terminating cations K+/BALA+ (beta-alanine (BALA)) and in anionic mode with leading/terminating anions Cl-/MES- (2-(N-morpholino)ethanesulphonic acid (MES)). Moreover, acetic acid extracts were analyzed by CZE using acetic acid as BGE, and alkaline water-SDS-buffer extracts were analyzed by CMEKC using TP-SDS as BGE. Extracted amounts of pollen allergens and other UV-absorbing compounds and the number of resolved components were evaluated from CZE, CMEKC and CITP analyses of the liquid extracts. Larger amounts of UV-absorbing material were found in the water-buffer pollen extracts than in the water extracts. More UV-absorbing material was found in all extracts from D. glomerata pollen than in relevant extracts from B. verrucosa pollen. It was found by CITP that the extracted amounts of anionic components and their number were much higher than those of cationic components. Concentrations of some inorganic ions (e.g. Cl-, K+, Na+, Ca2+) in pollen samples were also determined by CITP.

Investigation of the novel mixed-mode stationary phase for capillary electrochromatography

A novel packing material, 3-(4-sulfo-1,8-naphthalimido)propyl-modified silyl silica gel (SNAIP), was prepared for the use as a stationary phase of capillary electrochromatography (CEC). The sulfonic acid groups on SNAIP stationary phase contributed to the generation of electroosmotic flow (EOF) at low pH and served as a strong cation-exchanger. In CEC with SNAIP, a mixed-mode separation was predicted, comprising hydrophobic and electrostatic interactions as well as electrophoretic migration process. In order to understand the retention mechanism on SNAIP, effects of buffer pH, concentration, and mobile phase composition on EOF mobility and the retention factors of barbiturates and benzodiazepines were systematically investigated. Moreover, the retention behavior of barbiturates on SNAIP was investigated and compared with those on octadecyl silica (ODS), phenyl-bonded silica, and 3-(1,8-naphthalimido)propyl-modified silyl silica gel to confirm the presence of pi-pi interaction on its retention mechanism. It was observed that a column efficiency was more than 85,000 N/m for retained compounds and the relative standard deviations for the retention times of EOF marker, thiourea, and five barbiturates were below 2.5% (n = 4). Under an applied voltage of 20 kV and a mobile phase consisted of 5 mM phosphate (pH 3.8) and 40% methanol, the baseline separation of five barbiturates was achieved within 3 min.

Polymer-brush stationary phases for open-tubular capillary electrochromatography

Synthesis of poly(2-hydroxyethyl methacrylate) (PHEMA) brushes from the inside of silica capillaries by surface-initiated atom transfer radical polymerization (ATRP) yields unique stationary phases for open-tubular capillary electrochromatography (OT-CEC). Although PHEMA brushes have only a small effect on the separation of a set of phenols and anilines, derivatization of PHEMA with ethylenediamine (en) allows baseline resolution of several anilines that co-elute from bare silica capillaries. Derivatization of PHEMA with octanoyl chloride (C8-PHEMA films) affords even better resolution in the separation of a series of phenols and anilines. Increasing the thickness of C8-PHEMA coatings by a factor of 2 enhances resolution for several solute pairs, presumably because of an increase in the effective stationary phase to mobile phase volume ratio. Thus, this work demonstrates that thick polymer brushes provide a tunable stationary phase with a much larger phase ratio than is available from monolayer wall coatings. Through appropriate choice of derivatizing reagents, these polymer brushes should allow separation of a wide range of neutral molecules as well as compounds with similar electrophoretic mobilities.

Analysis of low-molecular-mass organic acids using capillary zone electrophoresis-electrospray ionization mass spectrometry

A capillary zone electrophoresis-electrospray ionization-mass spectrometry (CZE-ESI-MS) method was developed to facilitate identification and determination of eleven low-molecular-mass (LMW) organic acids (i.e. oxalic, lactic, malonic, maleic, citric, tartaric, adipic, glutaric, gluconic, isosaccharinic and succinic acid) in different sample matrices. This CZE method was adapted to suit MS conditions. Sheath liquid, sheath flow and MS parameters were optimized to achieve high mass spectrometric sensitivity. The CZE-ESI-MS procedure showed good sensitivity (limit of detection of < 0.05-0.7 mg/l for all acids), linearity (r2 = 0.9925-0.9998) and reproducibility (2.09-5.34% RSD). The applicability of the CZE-ESI-MS was demonstrated on LMW organic acids in an ale sample. In addition the (here presented) method also provided quantification of fumaric, galacturonic and 2-ketoglutaric acid with high sensitivity.

Mycotoxins in house dust problems and analytical Approaches

People in developed countries spend up to 90% of their time indoors. This led to an increased awareness for problems regarding indoor environment in the recent years. It is known that mycotoxins formed by moulds can be harmful to human health.The body burden of mycotoxins is caused primarily by the uptake of cereals and related products but sometimes also by animal products. However the health effects caused by indoor moulds are currently under investigation. Therefore the aim of an investigation program is to study mould-dependent health effects in a burdened population of the city of Leipzig, Germany. To estimate exposure situation house dust samples are collected from loaded apartments. To realise the measurements of selected mycotoxins in house dust the development of a suitable analytical method was necessary. Capillary electrophoresis in combination with a special clean up of the samples was found to be an useful tool for these investigations.

Evaluation of the efficiency of extraction of ultraviolet-absorbing pollen allergens and organic pollutants from airborne dust samples by capillary electromigration methods

Capillary electromigration methods, zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC), have been used for evaluation of the efficiency of different extraction agents applied to the extraction of pollen allergens and organic pollutants from dust samples collected during different periods (before, during and after pollen seasons) and in different locations in air-filtration devices (car-traffic tunnel in Prague and a metro station in Paris). Water and acetic acid extracts were analyzed by CZE using acetic acid as background electrolyte (BGE). Water and alkaline water-SDS-buffer extracts were analyzed by MEKC in Tris-phosphate BGE with anionic detergent sodium dodecylsulfate (SDS) micellar pseudophase. More material was extracted and more components were found in the water-buffer extracts than in the water extracts, and better resolution of the components was achieved by MEKC than by CZE. Significant differences have been found in the analyses of dust extracts of different origin. More material and more components have been found in the extracts of the dust collected in the pollen-rich period (March, April) than in the pollen-free period (December, January).