Seasonal dynamics of threshold friction velocity and dust emission in Central Asia

The association of meteorological parameters and AirQ+ health risk assessment of PM2.5 in Ratchaburi province, Thailand

Air quality is heavily influenced by rising pollution distribution levels which are a consequence of many artificial activities from numerous sources. This study aims to determine the relationship between meteorological data and air pollutants. The health effects of long-term PM_2.5 were estimated on expected life remaining (ELR) and years of life lost (YLL) indices in Ratchaburi province during the years 2015–2019 using AirQ+ software. Values obtained from the PM_2.5 averaging, and YLL data were processed for the whole population in the age range of 0–29, 30–60 and over 60. These values were entered into AirQ+ software. The mean annual concentration of PM_2.5 was highly variable, with the highest concentration being 136.42 μg/m³ and the lowest being 2.33 μg/m³. The results estimated that the highest and lowest YLL in the next 10 years for all age groups would be 24,970.60 and 11,484.50 in 2017 and 2019, respectively. The number of deaths due to COPD, IHD, and stroke related to long-term exposure to ambient PM_2.5 were 125, 27 and 26, respectively. The results showed that older people (> 64) had a higher YLL index than the groups aged under 64 years. The highest and lowest values for all ages were 307.15 (2015) and 159 (2017). Thus, this study demonstrated that the PM_2.5 effect to all age groups, especially the the elderly people, which the policy level should be awared and fomulated the stratergies to protecting the sensitive group.

Characteristics of the Spatio-Temporal Dynamics of Aerosols in Central Asia and Their Influencing Factors

Aerosols are an important component of the atmospheric system. Long time-series observations for aerosols are essential for examining global climate change and the ecological environment. Based on Google Earth Engine and MODIS MCD19A2 data, we monitored the spatio-temporal dynamic characteristics of the aerosol optical depth (AOD) in Central Asia from 2001 to 2020. The effects of six environmental factors on the AOD distribution were explored using a geographic detector model and analysed in combination with the land-use/land-cover change (LUCC) and desertification in different periods. The results showed that the average multi-year AOD in Central Asia was 0.1442, with insignificant interannual variations. The high-value areas were mainly distributed in the Aral Sea and surrounding areas of the Tarim Basin in Xinjiang, with notable seasonal variations. The evaluation results for the influencing factors showed that the relative humidity and precipitation had a large effect on the spatial distribution of the AOD. The LUCC directly affected contributions to the AOD. Desertification of land provides rich dust sources, which are the main aerosol sources in Central Asia, thus exacerbating dust aerosol pollution. This study investigated the temporal and spatial characteristics and influencing factors of the AOD in Central Asia, providing a theoretical basis for the prevention and control of air pollution.

Antecedent Soil Moisture Conditions Influenced Vertical Dust Flux: A Case Study in Iran Using WRF-Chem Model

Soil moisture is one of the most important parameters affecting dust emission flux. This study was conducted to investigate the effects of soil moisture on vertical dust flux in the central plateau region of Iran. In this study, the WRF-Chem (Weather Research and Forecast with Chemistry) model, with the GOCART (Global Ozone Chemistry Aerosol Radiation and Transport) scheme, was used to estimate the dust emission flux during a major storm from 19 to 21 July 2015, and to discriminate between dust sources. The results showed that the Kyrgyz deserts in Turkmenistan, the Arabian deserts in Saudi Arabia, the deserts of Iraq, and the Helmand region in Afghanistan are sources of foreign dust. Additionally, the central desert plain was identified as an internal dust source, where the dust level reached 7000 µg m−2 s−1. The results of WRF-Chem simulation were verified with reanalysis data from MERRA2 and AERONET data from Natanz station, which showed good agreement with the simulation. Based on the GLDAS reanalysis, soil moisture content varied between 2.6% and 34%. Linear and nonlinear regression of vertical dust flux values and soil moisture showed nonlinear behavior following the exponential function, with a correlation coefficient of 0.8 and a strong negative association between soil moisture and vertical dust flux.

Stepwise Assessment of Different Saltation Theories in Comparison with Field Observation Data

Wind-blown dust models use input data, including soil conditions and meteorology, to interpret the multi-step wind erosion process and predict the quantity of dust emission. Therefore, the accuracy of the wind-blown dust models is dependent on the accuracy of each input condition and the robustness of the model schemes for each elemental step of wind erosion. A thorough evaluation of a wind-blown model thus requires validation of the input conditions and the elemental model schemes. However, most model evaluations and intercomparisons have focused on the final output of the models, i.e., the vertical dust emission. Recently, a delicate set of measurement data for saltation flux and friction velocity was reported from the Japan-Australia Dust Experiment (JADE) Project, which enabled the step-by-step evaluation of wind-blown dust models up to the saltation step. When all the input parameters were provided from the observations, both the two widely used saltation schemes showed very good agreement with measurements, with the correlation coefficient and the agreement of index both being larger than 0.9, which demonstrated the strong robustness of the physical schemes for saltation. However, using the meteorology model to estimate the input conditions such as weather and soil conditions, considerably degraded the models’ performance. The critical reason for the model failure was determined to be the inaccuracy in the estimation of the threshold friction velocity (representing soil condition), followed by inaccurate estimation of surface wind speed. It was not possible to determine which of the two saltation schemes was superior, based on the present study results. Such differentiation will require further evaluation studies using more measurements of saltation flux and vertical dust emissions.

Analysis of Dust Aerosol Retrievals Using Satellite Data in Central Asia

Several long-term monitoring of aerosol datasets from the Moderate Resolution Imaging Spectroradiometer (MODIS) on board Terra/Aqua, Multi-angle Imaging SpectroRadiometer (MISR), Sea-Viewing Wide Field-of-View Sensor (SeaWiFS) were used to derive the dust aerosol optical depth (DOD) in Central Asia based on the Angstrom exponent parameter and/or the particle shape. All sensors agree very well on the interannual variability of DOD. The seasonal analysis of DOD and dust occurrences identified the largest dust loading and the most frequent dust occurrence in the spring and summer, respectively. No significant trend was found during the research period in terms of both DOD and the dust occurrence. Further analysis of Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) aerosol products on a case-by-case basis in most dust months of 2007 suggested that the vertical structure is varying in terms of the extension and the dust loading from one event to another, although dust particles of most episodes have similar physical characteristics (particle shape and size). Our analysis on the vertical structure of dust plumes, the layer-integrated color ratio and depolarization ratio indicates a varied climate effect (e.g., the direct radiative impact) by mineral dust, dependent on the event being observed in Central Asia.

Development of High-Resolution Dynamic Dust Source Function -A Case Study with a Strong Dust Storm in a Regional Model

A high-resolution dynamic dust source has been developed in the NASA Unified-Weather Research and Forecasting (NU-WRF) model to improve the existing coarse static dust source. In the new dust source map, topographic depression is in 1-km resolution and surface bareness is derived using the Normalized Difference Vegetation Index (NDVI) data from Moderate Resolution Imaging Spectroradiometer (MODIS). The new dust source better resolves the complex topographic distribution over the Western United States where its magnitude is higher than the existing, coarser resolution static source. A case study is conducted with an extreme dust storm that occurred in Phoenix, Arizona in 02-03 UTC July 6, 2011. The NU-WRF model with the new high-resolution dynamic dust source is able to successfully capture the dust storm, which was not achieved with the old source identification. However the case study also reveals several challenges in reproducing the time evolution of the short-lived, extreme dust storm events.

Development and evaluation of a physics-based windblown dust emission scheme implemented in the CMAQ modeling system

A new windblown dust emission treatment was incorporated in the Community Multiscale Air Quality (CMAQ) modeling system. This new model treatment has been built upon previously developed physics-based parameterization schemes from the literature. A distinct and novel feature of this scheme, however, is the incorporation of a newly developed dynamic relation for the surface roughness length relevant to small-scale dust generation processes. Through this implementation, the effect of nonerodible elements on the local flow acceleration, drag partitioning, and surface coverage protection is modeled in a physically based and consistent manner. Careful attention is paid in integrating the new windblown dust treatment in the CMAQ model to ensure that the required input parameters are correctly configured. To test the performance of the new dust module in CMAQ, the entire year 2011 is simulated for the continental United States, with particular emphasis on the southwestern United States (SWUS) where windblown dust concentrations are relatively large. Overall, the model shows good performance with the daily mean bias of soil concentrations fluctuating in the range of ±1 μg m-3 for the entire year. Springtime soil concentrations are in quite good agreement (normalized mean bias of 8.3%) with observations, while moderate to high underestimation of soil concentration is seen in the summertime. The latter is attributed to the issue of representing the convective dust storms in summertime. Evaluations against observations for seven elevated dust events in the SWUS indicate that the new windblown dust treatment is capable of capturing spatial and temporal characteristics of dust outbreaks.