Investigating a novel split-filter dual-energy CT technique for improving pancreas tumor visibility for radiation therapy

Optimizing twin-beam dual-energy CT reconstruction: Quantitative consistency and stability assessment in reference to 120 kV: An observational study

The split filter CT can filter X-ray beam. Theoretically, the split filter CT not only provides a good low-energy beam, but also provides a more robust CT value. The aim of this study was to compare conventional single-energy computed tomography (SECT) and twin-beam dual-energy (TBDE) CT regarding the quantitative consistency and stabilities of HU measurements at different abdominal organs. Forty-four patients were prospectively enrolled to randomly receive SECT and TBDE protocols at either body part of a thorax-abdominal examination. Their overlapping scan coverage was subjected to further image analysis. For TBDE scans, composed images(c-images) and virtual monoenergetic images (VMIs) at 60, 70, 80, and 90 kiloelectron volt (keV) were reconstructed. The attenuations were measured at 5 abdominal organs and compared between SECT and TBDE to characterize quantitative consistency by intraclass correlation coefficients (ICCs), whereas their standard deviations were used to assess the Hounsfield Unit (HU) stability. The c-images, 70 keV and 80 keV VMIs from TBDE provided consistent HU values (all ICCs > 0.8) with the SECT measurements; moreover, these TBDE images had superior HU stability over SECT images in all abdominal measurements except for fat tissue. The best HU stability can be achieved in 80 keV VMIs with the lowest noise level. The c-images and VMIs derived from TBDE can produce consistent values as SECT. The 80 keV images displayed better HU stability and a lower noise level across various abdominal organs.

Split-filter dual energy computed tomography radiotherapy: From calibration to image guidance

Background and purpose

Dual-energy computed tomography (DECT) is an emerging technology in radiotherapy (RT). Here, we investigate split-filter DECT throughout the RT treatment chain as compared to single-energy CT (SECT).

Materials and methods

DECT scans were acquired with a tin-gold split-filter at 140 kV resulting in a low- and high-energy CT reconstruction (recon). Ten cancer patients (four head-and-neck (HN)​, three rectum​, two anal/pelvis and one abdomen) were DECT scanned without and with iodine administered. A cylindrical and an anthropomorphic HN phantom were scanned with DECT and 120 kV SECT. The DECT images generated were: 120 kV SECT-equivalent (CTmix), virtual monoenergetic images (VMIs), iodine map, virtual non-contrast (VNC), effective atomic number (Zeff), and relative electron density (ρe,w). The clinical utility of these recons was investigated for calibration, delineation, dose calculation and image-guided RT (IGRT).

Results

A calibration curve for 75 keV VMI had a root-mean-square-error (RMSE) of 34 HU in closest agreement with the RSME of SECT calibration. This correlated with a phantom-based dosimetric agreement to SECT of γ1%1mm > 98%. A 40 keV VMI recon was most promising to improve tumor delineation accuracy with an average evaluation score of 1.6 corresponding to "partial improvement". The dosimetric impact of iodine was in general < 2%. For this setup, VNC vs. non-contrast CTmix based dose calculations are considered equivalent. SECT- and DECT-based IGRT was in agreement within the setup uncertainty.

Conclusions

DECT-based RT could be a feasible alternative to SECT providing additional recons to support the different steps of the RT workflow.

Thoracic Diseases: Technique and Applications of Dual-Energy CT

Dual-energy computed tomography (DECT) is one of the most promising technological innovations made in the field of imaging in recent years. Thanks to its ability to provide quantitative and reproducible data, and to improve radiologists' confidence, especially in the less experienced, its applications are increasing in number and variety. In thoracic diseases, DECT is able to provide well-known benefits, although many recent articles have sought to investigate new perspectives. This narrative review aims to provide the reader with an overview of the applications and advantages of DECT in thoracic diseases, focusing on the most recent innovations. The research process was conducted on the databases of Pubmed and Cochrane. The article is organized according to the anatomical district: the review will focus on pleural, lung parenchymal, breast, mediastinal, lymph nodes, vascular and skeletal applications of DECT. In conclusion, considering the new potential applications and the evidence reported in the latest papers, DECT is progressively entering the daily practice of radiologists, and by reading this simple narrative review, every radiologist will know the state of the art of DECT in thoracic diseases.

Spectral CT imaging: Technical principles of dual-energy CT and multi-energy photon-counting CT

Spectral computed tomography (CT) imaging encompasses a unique generation of CT systems based on a simple principle that makes use of the energy-dependent information present in CT images. Over the past two decades this principle has been expanded with the introduction of dual-energy CT systems. The first generation of spectral CT systems, represented either by dual-source or dual-layer technology, opened up a new imaging approach in the radiology community with their ability to overcome the limitations of tissue characterization encountered with conventional CT. Its expansion worldwide can also be considered as an important leverage for the recent groundbreaking technology based on a new chain of detection available on photon counting CT systems, which holds great promise for extending CT towards multi-energy CT imaging. The purpose of this article was to detail the basic principles and techniques of spectral CT with a particular emphasis on the newest technical developments of dual-energy and multi-energy CT systems.

Characterization of size-specific effects during dual-energy CT material decomposition of non-iodine materials

PURPOSE

The dual-energy CT (DECT) LiverVNC application class in the Siemens Syngo.via software has been used to perform non-iodine material decompositions. However, the LiverVNC application is designed with an optional size-specific calibration based on iodine measurements. This work investigates the effects of this iodine-based size-specific calibration on non-iodine material decomposition and benchmarks alternative methods for size-specific calibrations.

METHODS

Calcium quantification was performed with split-filter and sequential-scanning DECT techniques on the Siemens SOMATOM Definition Edge CT scanner. Images were acquired of the Gammex MECT abdomen and head phantom containing calcium inserts with concentrations ranging from 50-300 mgCa/ml. Several workflows were explored investigating the effects of size-specific dual-energy ratios (DERs) and the beam hardening correction (BHC) function in the LiverVNC application. Effects of image noise were also investigated by varying CTDIvol and using iterative reconstruction (ADMIRE).

RESULTS

With the default BHC activated, Syngo.via underestimated the calcium concentrations in the abdomen for sequential-scanning acquisitions, leaving residual calcium in the virtual non-contrast images and underestimating calcium in the enhancement images for all DERs. Activation of the BHC with split-filter images resulted in a calcium over- or underestimation depending on the DER. With the BHC inactivated, the use of a single DER led to an under- or overestimate of calcium concentration depending on phantom size and DECT modality. Optimal results were found with BHC inactivated using size-specific DERs. CTDIvol levels and ADMIRE had no significant effect on results.

CONCLUSION

When performing non-iodine material decomposition in the LiverVNC application class, it is important to understand the implications of the BHC function and to account for patient size appropriately. The BHC in the LiverVNC application is specific to iodine and leads to inaccurate quantification of other materials. The inaccuracies can be overcome by deactivating the BHC function and using size-specific DERs, which provided the most accurate calcium quantification.

Dual-Energy Computed Tomography for the Diagnosis of Mediastinal Lymph Node Metastasis in Lung Cancer Patients: A Preliminary Study

OBJECTIVE

This study explored the feasibility of dual-energy computed tomography (DECT) for the diagnosis of mediastinal lymph node (LN) metastasis in patients with lung cancer.

METHODS

Forty-two consecutive patients with lung cancer, who underwent DECT, were included in this retrospective study. The attenuation value (Hounsfield unit) in virtual monochromatic images and the iodine concentration in the iodine map were measured at mediastinal LNs. The slope of the spectral attenuation curve (K) and normalized iodine concentration (in thoracic aorta) were calculated. The measurement results were statistically compared using 2 independent samples t test. Receiver operating characteristic curve analysis, net reclassification improvement, and integrated discrimination improvement were used to evaluate the diagnostic performance of DECT for mediastinal LN metastasis.

RESULTS

A total of 74 mediastinal LNs were obtained, including 33 metastatic LNs and 41 nonmetastatic LNs. The attenuation value at the lower energy levels of virtual monochromatic images (40-90 keV), K, and normalized iodine concentration demonstrated a significant difference between metastatic LNs and nonmetastatic LNs. The attenuation value at 40 keV was the most favorable biomarker for the diagnosis of mediastinal LN metastasis (area under curve, 0.91; sensitivity, 0.94; specificity, 0.81), which showed a much better performance than the LN diameter-based evaluation method (area under curve, 0.72; sensitivity, 0.66; specificity, 0.82; net reclassification improvement, 0.359; integrated discrimination improvement, 0.330).

CONCLUSIONS

Dual-energy computed tomography is a promising diagnostic approach for the diagnosis of mediastinal LN metastasis in patients with lung cancer, which may help clinicians implement personalized treatment strategies.

Head and neck multi-organ segmentation on dual-energy CT using dual pyramid convolutional neural networks

Organ delineation is crucial to diagnosis and therapy, while it is also labor-intensive and observer-dependent. Dual energy CT (DECT) provides additional image contrast than conventional single energy CT (SECT), which may facilitate automatic organ segmentation. This work aims to develop an automatic multi-organ segmentation approach using deep learning for head-and-neck region on DECT. We proposed a mask scoring regional convolutional neural network (R-CNN) where comprehensive features are firstly learnt from two independent pyramid networks and are then combined via deep attention strategy to highlight the informative ones extracted from both two channels of low and high energy CT. To perform multi-organ segmentation and avoid misclassification, a mask scoring subnetwork was integrated into the Mask R-CNN framework to build the correlation between the class of potential detected organ's region-of-interest (ROI) and the shape of that organ's segmentation within that ROI. We evaluated our model on DECT images from 127 head-and-neck cancer patients (66 training, 61 testing) with manual contours of 19 organs as training target and ground truth. For large- and mid-sized organs such as brain and parotid, the proposed method successfully achieved average Dice similarity coefficient (DSC) larger than 0.8. For small-sized organs with very low contrast such as chiasm, cochlea, lens and optic nerves, the DSCs ranged between around 0.5 and 0.8. With the proposed method, using DECT images outperforms using SECT in almost all 19 organs with statistical significance in DSC (p<0.05). Meanwhile, by using the DECT, the proposed method is also significantly superior to a recently developed FCN-based method in most of organs in terms of DSC and the 95th percentile Hausdorff distance. Quantitative results demonstrated the feasibility of the proposed method, the superiority of using DECT to SECT, and the advantage of the proposed R-CNN over FCN on the head-and-neck patient study. The proposed method has the potential to facilitate the current head-and-neck cancer radiation therapy workflow in treatment planning.

Split-filter dual-energy CT pulmonary angiography for the diagnosis of acute pulmonary embolism: a study on image quality and radiation dose

Background

Computed tomography (CT) pulmonary angiography is the diagnostic reference standard in suspected pulmonary embolism (PE). Favorable results for dual-energy CT (DECT) images have been reported for this condition. Nowadays, dual-energy data acquisition is feasible with different technical options, including a single-source split-filter approach. Therefore, the aim of this retrospective study was to investigate image quality and radiation dose of thoracic split-filter DECT in comparison to conventional single-energy CT in patients with suspected PE.

Methods

A total of 110 CT pulmonary angiographies were accomplished either as standard single-energy CT with automatic tube voltage selection (ATVS) (n=58), or as split-filter DECT (n=52). Objective [pulmonary artery CT attenuation, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR)] and subjective image quality [four-point Likert scale; three readers (R)] were compared among the two study groups. Size-specific dose estimates (SSDE), dose-length-product (DLP) and volume CT dose index (CTDIvol) were assessed for radiation dose analysis.

Results

Split-filter DECT images yielded 67.7% higher SNR (27.0 vs. 16.1; P<0.001) and 61.9% higher CNR (22.5 vs. 13.9; P<0.001) over conventional single-energy images, whereas CT attenuation was significantly lower (344.5 vs. 428.2 HU; P=0.013). Subjective image quality was rated good or excellent in 93.0%/98.3%/77.6% (R1/R2/R3) of the single-energy CT scans, and 84.6%/82.7%/80.8% (R1/R2/R3) of the split-filter DECT scans. SSDE, DLP and CTDIvol were significantly lower for conventional single-energy CT compared to split-filter DECT (all P<0.05), which was associated with 26.7% higher SSDE.

Conclusions

In the diagnostic workup of acute PE, the split-filter allows for dual-energy data acquisition from single-source single-layer CT scanners. The existing opportunity to assess pulmonary "perfusion" based on analysis of iodine distribution maps is associated with higher radiation dose in terms of increased SSDE than conventional single-energy CT with ATVS. Moreover, a proportion of up to 3.8% non-diagnostic examinations in the current reference standard test for PE is not negligible.

Improvement of image quality for pancreatic cancer using deep learning-generated virtual monochromatic images: Comparison with single-energy computed tomography

PURPOSE

To construct a deep convolutional neural network that generates virtual monochromatic images (VMIs) from single-energy computed tomography (SECT) images for improved pancreatic cancer imaging quality.

MATERIALS AND METHODS

Fifty patients with pancreatic cancer underwent a dual-energy CT simulation and VMIs at 77 and 60 keV were reconstructed. A 2D deep densely connected convolutional neural network was modeled to learn the relationship between the VMIs at 77 (input) and 60 keV (ground-truth). Subsequently, VMIs were generated for 20 patients from SECT images using the trained deep learning model.

RESULTS

The contrast-to-noise ratio was significantly improved (p < 0.001) in the generated VMIs (4.1 ± 1.8) compared to the SECT images (2.8 ± 1.1). The mean overall image quality (4.1 ± 0.6) and tumor enhancement (3.6 ± 0.6) in the generated VMIs assessed on a five-point scale were significantly higher (p < 0.001) than that in the SECT images (3.2 ± 0.4 and 2.8 ± 0.4 for overall image quality and tumor enhancement, respectively).

CONCLUSIONS

The quality of the SECT image was significantly improved both objectively and subjectively using the proposed deep learning model for pancreatic tumors in radiotherapy.

Dual energy CT in gland tumors: a comprehensive narrative review and differential diagnosis

Dual energy CT (DECT)with image acquisition at two different photon X-ray levels allows the characterization of a specific tissue or material/elements, the extrapolation of virtual unenhanced and monoenergetic images, and the quantification of iodine uptake; such special capabilities make the DECT the perfect technique to support oncological imaging for tumor detection and characterization and treatment monitoring, while concurrently reducing the dose of radiation and iodine and improving the metal artifact reduction. Even though its potential in the field of oncology has not been fully explored yet, DECT is already widely used today thanks to the availability of different CT technologies, such as dual-source, single-source rapid-switching, single-source sequential, single-source twin-beam and dual-layer technologies. Moreover DECT technology represents the future of the imaging innovation and it is subject to ongoing development that increase according its clinical potentiality, in particular in the field of oncology. This review points out recent state-of-the-art in DECT applications in gland tumors, with special focus on its potential uses in the field of oncological imaging of endocrine and exocrine glands.

Improved detectability of hypoattenuating focal pancreatic lesions by dual-layer computed tomography using virtual monoenergetic images

Background

Multidetector CT is the mainstay for radiologic evaluation of pancreatic pathology. Still, imaging of focal pancreatic lesions using MDCT is faced by a number of challenges that are related to the limited contrast between the lesion and surrounding parenchyma, such as detecting early-stage pancreatic cancer and subtle features of cystic lesions that point to malignancy. Dual-layer CT is the first dual-energy CT machine based on separation of high- and low-energy photons at the detector level. If improved contrast between the lesions and normal pancreatic parenchyma could be achieved on CT images, we may expect enhanced CT detection of pancreatic lesions. The purpose of this study was to evaluate whether virtual monoenergetic reconstructions generated using contrast-enhanced dual-layer CT could improve detectability of hypoattenuating focal pancreatic lesions compared to conventional polyenergetic reconstructions.

Results

Fifty-four lesions were identified and verified by histopathology or follow-up CT, MRCP, and/or EUS along with clinical data. Across the virtual monoenergetic spectrum, 40 KeV images had the highest contrast-to-noise and signal-to-noise ratios (p < 0.001, p < 0.001) and were significantly higher than conventional images (p < 0.001). Subjective scores for lesion visibility at low kiloelectron volt monoenergetic (40 and 50 KeV) images greatly exceeded conventional images (p < 0.001).

Conclusion

Low kiloelectron volt monoenergetic reconstructions of contrast-enhanced dual-layer CT significantly improve detectability of hypoattenuating focal pancreatic lesions compared to conventional polyenergetic reconstructions.

Evaluation of a commercial deformable image registration algorithm for dual-energy CT processing

Purpose

Several dual‐energy computed tomography (DECT) techniques require a deformable image registration to correct for motion between the acquisition of low and high energy data. However, current DECT software does not provide tools to assess registration accuracy or allow the user to export deformed images, presenting a unique challenge for image registration quality assurance (QA). This work presents a methodology to evaluate the accuracy of DECT deformable registration and to quantify the impact of registration errors on end‐product images.

Methods

The deformable algorithm implemented in Siemen Healthineers's Syngo was evaluated using a deformable abdomen phantom and a rigid phantom to mimic sliding motion in the thorax. Both phantoms were imaged using sequential 80 and 140 kVp scans with motion applied between the two scans. Since Syngo does not allow the export of the deformed images, this study focused on quantifying the accuracy of various end‐product, dual‐energy images resulting from processing of deformed images.

Results

The Syngo algorithm performed well for the abdomen phantom with a mean registration error of 0.4 mm for landmark analysis, Dice similarity coefficients (DSCs) > 0.90 for five organs contoured, and mean iodine concentrations within 0.2 mg/mL of values measured on static images. For rigid sliding motion, the algorithm performed poorer and resulted in noticeable registration errors toward the superior and inferior scan extents and DSCs as low as 0.41 for iodine rods imaged in the phantom. Additionally, local iodine concentration errors in areas of misregistration exceeded 3 mg/mL.

Conclusions

This work represents the first methodology for DECT image registration QA using commercial software. Our data support the clinical use of the Syngo algorithm for abdominal sites with limited motion (i.e., pancreas and liver). However, dual‐energy images generated with this algorithm should be used with caution for quantitative measurements in areas with sliding motion.

Investigating split-filter dual-energy CT for improving liver tumor visibility for radiation therapy

Purpose

Accurate liver tumor delineation is crucial for radiation therapy, but liver tumor volumes are difficult to visualize with conventional single‐energy CT. This work investigates the use of split‐filter dual‐energy CT (DECT) for liver tumor visibility by quantifying contrast and contrast‐to‐noise ratio (CNR).

Methods

Split‐filter DECT contrast‐enhanced scans of 20 liver tumors including cholangiocarcinomas, hepatocellular carcinomas, and liver metastases were acquired. Analysis was performed on the arterial and venous phases of mixed 120 kVp‐equivalent images and VMIs at 57 keV and 40 keV gross target volume (GTV) contrast and CNR were calculated.

Results

For the arterial phase, liver GTV contrast was 12.1 ± 10.0 HU and 43.1 ± 32.3 HU (P < 0.001) for the mixed images and 40 keV VMIs. Image noise increased on average by 116% for the 40 keV VMIs compared to the mixed images. The average CNR did not change significantly (1.6 ± 1.5, 1.7 ± 1.4, 2.4 ± 1.7 for the mixed, 57 keV and 40 keV VMIs (P > 0.141)). For individual cases, however, CNR increases of up to 607% were measured for the 40 keV VMIs compared to the mixed image. Venous phase 40 keV VMIs demonstrated an average increase of 35.4 HU in GTV contrast and 121% increase in image noise. Average CNR values were also not statistically different, but for individual cases CNR increases of up to 554% were measured for the 40 keV VMIs compared to the mixed image.

Conclusions

Liver tumor contrast was significantly improved using split‐filter DECT 40 keV VMIs compared to mixed images. On average, there was no statistical difference in CNR between the mixed images and VMIs, but for individual cases, CNR was greatly increased for the 57 keV and 40 keV VMIs. Therefore, although not universally successful for our patient cohort, split‐filter DECT VMIs may provide substantial gains in tumor visibility of certain liver cases for radiation therapy treatment planning.

Advanced imaging techniques for chronic pancreatitis

MRI and MRCP play an important role in the diagnosis of chronic pancreatitis (CP) by imaging pancreatic parenchyma and ducts. MRI/MRCP is more widely used than computed tomography (CT) for mild to moderate CP due to its increased sensitivity for pancreatic ductal and gland changes; however, it does not detect the calcifications seen in advanced CP. Quantitative MR imaging offers potential advantages over conventional qualitative imaging, including simplicity of analysis, quantitative and population-based comparisons, and more direct interpretation of detected changes. These techniques may provide quantitative metrics for determining the presence and severity of acinar cell loss and aid in the diagnosis of chronic pancreatitis. Given the fact that the parenchymal changes of CP precede the ductal involvement, there would be a significant benefit from developing MRI/MRCP-based, more robust diagnostic criteria combining ductal and parenchymal findings. Among cross-sectional imaging modalities, multi-detector CT (MDCT) has been a cornerstone for evaluating chronic pancreatitis (CP) since it is ubiquitous, assesses primary disease process, identifies complications like pseudocyst or vascular thrombosis with high sensitivity and specificity, guides therapeutic management decisions, and provides images with isotropic resolution within seconds. Conventional MDCT has certain limitations and is reserved to provide predominantly morphological (e.g., calcifications, organ size) rather than functional information. The emerging applications of radiomics and artificial intelligence are poised to extend the current capabilities of MDCT. In this review article, we will review advanced imaging techniques by MRI, MRCP, CT, and ultrasound.

Optimal virtual monoenergetic image in "TwinBeam" dual-energy CT for organs-at-risk delineation based on contrast-noise-ratio in head-and-neck radiotherapy

PURPOSE

Dual-energy computed tomography (DECT) using TwinBeam CT (TBCT) is a new option for radiation oncology simulators. TBCT scanning provides virtual monoenergetic images which are attractive in treatment planning since lower energies offer better contrast for soft tissues, and higher energies reduce noise. A protocol is needed to achieve optimal performance of this feature. In this study, we investigated the TBCT scan schema with the head-and-neck radiotherapy workflow at our clinic and selected the optimal energy with best contrast-noise-ratio (CNR) in organs-at-risks (OARs) delineation for head-and-neck treatment planning.

METHODS AND MATERIALS

We synthesized monochromatic images from 40 keV to 190 keV at 5 keV increments from data acquired by TBCT. We collected the Hounsfield unit (HU) numbers of OARs (brainstem, mandible, spinal cord, and parotid glands), the HU numbers of marginal regions outside OARs, and the noise levels for each monochromatic image. We then calculated the CNR for the different OARs at each energy level to generate a serial of spectral curves for each OAR. Based on these spectral curves of CNR, the mono-energy corresponding to the max CNR was identified for each OAR of each patient.

RESULTS

Computed tomography scans of ten patients by TBCT were used to test the optimal monoenergetic image for the CNR of OAR. Based on the maximized CNR, the optimal energy values were 78.5 ± 5.3 keV for the brainstem, 78.0 ± 4.2 keV for the mandible, 78.5 ± 5.7 keV for the parotid glands, and 78.5 ± 5.3 keV for the spinal cord. Overall, the optimal energy for the maximum CNR of these OARs in head-and-neck cancer patients was 80 keV.

CONCLUSION

We have proposed a clinically feasible protocol that selects the optimal energy level of the virtual monoenergetic image in TBCT for OAR delineation based on the CNR in head-and-neck OAR. This protocol can be applied in TBCT simulation.