Single-Cell Microgels for Diagnostics and Therapeutics

Developmental dynamics mimicking inversely engineered pericellular matrix for articular cartilage regeneration

The mechanical mismatch of scaffold matrix-mesenchymal stem cells (MSCs) has been a longstanding issue in the clinical application of MSC-based therapy for articular cartilage (AC) regeneration. Existing tissue-engineered scaffolds underestimate the importance of the natural chondrocyte pericellular matrix (PCM). Here, we reveal the temporal and spatial characteristics of collagen distribution around the chondrocytes. Next, we demonstrate a rationally designed layer-by-layer single-cell encapsulation system which can mimic PCM mechanical responses and enhance MSC chondrogenesis via reestablished the mechanical coupling of PCM-like primitive matrix and chondrocytes. This successfully simulates the temporal and spatial characteristics of collagen secretion. Through investigation of the micromechanical environment of the cells and full-atom simulation analysis of TRPV4, we determine the specific mechanisms by which cellular mechanical forces near the cell are converted into biological signals. The TRPV4-YAP/TAZ-PI3K-Akt signaling pathway is involved in MSC cartilage formation through a joint analysis of the mRNA sequencing and spatial transcriptome results. In a rat model of articular cartilage defects, our inversely engineered pericellular matrix-encapsulated MSC-loaded scaffolds show regenerative performance that are superior to those of scaffolds loaded with only MSCs. These results demonstrate the feasibility of using a PCM-mimicking system to improve MSC chondrogenesis and the efficacy of AC repair.

Encapsulation of single vesicles and single cells in a crosslinked microgel cage

Cell encapsulation provides an efficient strategy to enhance cell durability against harsh external conditions, that offers new possibilities for single-cell applications, such as, tissue engineering and regenerative medicine. Cell encapsulations in hydrogels is developed through various approaches. Still, it remains challenging to achieve single-cell encapsulation where the individual cells are surrounded by a hydrogel layer of well-defined thickness. In this study, temperature-responsive poly(N-isopropylacrylamide)-co-allylamine microgel particles are first assembled into a monolayer at the surface of giant unilamellar lipid vesicles and then inter-microgel crosslinked leading to single-vesicle encapsulation with a pre-defined hydrogel thickness. The same strategy is then extended to yeast cells. The successful encapsulation process is evidenced by the response of the encapsulated lipid vesicles/cells to osmotic gradient, the addition of detergent or salt, as well as changes in temperature. Moreover, cell viability tests show that the hydrogel cage can efficiently protect the cell against external harsh conditions, including elevated temperature, ultraviolet irradiation and osmotic stress. Furthermore, it is demonstrated that the microgel adsorption and interfacial assembly are significantly affected by membrane charge and structural heterogeneity of cell membrane, providing insight into rational design of single-cell encapsulation approach by regulating microgel adsorption on cell membranes with complex composition.

Indenting at the Microscale: Guidelines for Robust Mechanical Characterization of Alginate Microgels

Microgels offer broad applications in bioengineering due to their customizable properties, supporting innovations in mechanobiology, tissue engineering, drug delivery, and cell therapy. This study focuses on characterizing ionically cross-linked alginate microgels using a nanoindentation technique, enabling precise assessment of their mechanical properties at the microscale. We report on the microfluidic fabrication of alginate microgels with varying sizes at different cross-linker concentrations and on the mechanical characterization of the resulting microgels in terms of Young's moduli as well as viscoelastic behavior. Measurements conducted using dynamic nanoindentation reveal that microgel elasticity is strongly influenced by the ionic composition of the surrounding media, in particular, the concentration of calcium and sodium. We demonstrate that the highest Young's modulus observed for ionically cross-linked alginate microgels is in deionized water (7.2 ± 0.9 kPa). A drastic softening effect is observed when the calcium cross-linked microgels are placed into a storage buffer containing divalent ions (0.7 ± 0.1 kPa) and cell culture media consisting of Dulbecco's Modified Eagle Medium (0.2 ± 0.1 kPa) with fetal bovine serum (0.4 ± 0.1 kPa). High concentrations of sodium were found to disrupt ionic cross-links, decreasing stiffness and increasing viscosity, with reversible effects observed upon switching back to deionized water. These findings highlight the importance of media selection for applications requiring mechanical stability, and we provide guidelines for measuring the mechanical properties of microgels in a robust manner that is applicable to a wide range of different conditions.

Mechanoactivation of Single Stem Cells in Microgels Using a 3D-Printed Stimulation Device

In this study, the novel 3D-printed pressure chamber for encapsulated single-cell stimulation (3D-PRESS) platform is introduced for the mechanical stimulation of single stem cells in 3D microgels. The custom-designed 3D-PRESS, allows precise pressure application up to 400 kPa at the single-cell level. Microfluidics is employed to encapsulate single mesenchymal stem cells within ionically cross-linked alginate microgels with cell adhesion RGD peptides. Rigorous testing affirms the leak-proof performance of the 3D-PRESS device up to 400 kPa, which is fully biocompatible. 3D-PRESS is implemented on mesenchymal stem cells for mechanotransduction studies, by specifically targeting intracellular calcium signaling and the nuclear translocation of a mechanically sensitive transcription factor. Applying 200 kPa pressure on individually encapsulated stem cells reveals heightened calcium signaling in 3D microgels compared to conventional 2D culture. Similarly, Yes-associated protein (YAP) translocation into the nucleus occurs at 200 kPa in 3D microgels with cell-binding RGD peptides unveiling the involvement of integrin-mediated mechanotransduction in singly encapsulated stem cells in 3D microgels. Combining live-cell imaging with precise mechanical control, the 3D-PRESS platform emerges as a versatile tool for exploring cellular responses to pressure stimuli, applicable to various cell types, providing novel insights into single-cell mechanobiology.

Probing of New Polymer-Based Microcapsules for Islet Cell Immunoisolation

Islet allotransplantation offers a promising cell therapy for type 1 diabetes, but challenges such as limited donor availability and immunosuppression persist. Microencapsulation of islets in polymer-coated alginate microcapsules is a favored strategy for immune protection and maintaining islet viability. This study introduces Poly [2-(methacryloyloxy)ethyl]trimethylammonium chloride (PMETAC) as an innovative coating material for microcapsules. PMETAC enhances biocompatibility and durability, marking a significant advancement in islet encapsulation. Our approach combines alginate with PMETAC to create Langerhans islet microcapsules, simplifying material composition and preparation and ultimately lowering costs and increasing clinical applicability. Our comprehensive evaluation of the stability (including osmotic stability, thermal stability, and culture condition stability) and cytotoxicity of a novel microencapsulation system based on alginate-PMETAC-alginate offers insights into its potential application in islet immunoisolation strategies. Microcapsules with PMETAC content ranging from 0.01 to 1% are explored in the current work. The results indicate that the coatings made with 0.4% PMETAC show the most promising outcomes, remaining stable in the mentioned tests and exhibiting the required permeability. It was shown that the islets encapsulated in this manner retain viability and functional activity. Thus, alginate microcapsules coated with 0.4% PMETAC are suitable for further animal trials. While our findings are promising, further studies, including animal testing, will be necessary to evaluate the clinical applicability of our encapsulation method.

Strategies to decouple cell micro-scale and macro-scale environments for designing multifunctional biomimetic tissues

The regulation of cellular behavior within a three-dimensional (3D) environment to execute a specific function remains a challenge in the field of tissue engineering. In native tissues, cells and matrices are arranged into 3D modular units, comprising biochemical and biophysical signals that orchestrate specific cellular activities. Modular tissue engineering aims to emulate this natural complexity through the utilization of functional building blocks with unique stimulation features. By adopting a modular approach and using well-designed biomaterials, cellular microenvironments can be effectively decoupled from their macro-scale surroundings, enabling the development of engineered tissues with enhanced multifunctionality and heterogeneity. We overview recent advancements in decoupling the cellular micro-scale niches from their macroenvironment and evaluate the implications of this strategy on cellular and tissue functionality.

Microgels for Cell Delivery in Tissue Engineering and Regenerative Medicine

Microgels prepared from natural or synthetic hydrogel materials have aroused extensive attention as multifunctional cells or drug carriers, that are promising for tissue engineering and regenerative medicine. Microgels can also be aggregated into microporous scaffolds, promoting cell infiltration and proliferation for tissue repair. This review gives an overview of recent developments in the fabrication techniques and applications of microgels. A series of conventional and novel strategies including emulsification, microfluidic, lithography, electrospray, centrifugation, gas-shearing, three-dimensional bioprinting, etc. are discussed in depth. The characteristics and applications of microgels and microgel-based scaffolds for cell culture and delivery are elaborated with an emphasis on the advantages of these carriers in cell therapy. Additionally, we expound on the ongoing and foreseeable applications and current limitations of microgels and their aggregate in the field of biomedical engineering. Through stimulating innovative ideas, the present review paves new avenues for expanding the application of microgels in cell delivery techniques.

Cellular nucleus image-based smarter microscope system for single cell analysis

Cell imaging technology is undoubtedly a powerful tool for studying single-cell heterogeneity due to its non-invasive and visual advantages. It covers microscope hardware, software, and image analysis techniques, which are hindered by low throughput owing to abundant hands-on time and expertise. Herein, a cellular nucleus image-based smarter microscope system for single-cell analysis is reported to achieve high-throughput analysis and high-content detection of cells. By combining the hardware of an automatic fluorescence microscope and multi-object recognition/acquisition software, we have achieved more advanced process automation with the assistance of Robotic Process Automation (RPA), which realizes a high-throughput collection of single-cell images. Automated acquisition of single-cell images has benefits beyond ease and throughout and can lead to uniform standard and higher quality images. We further constructed a single-cell image database-based convolutional neural network (Efficient Convolutional Neural Network, E-CNN) exceeding 20618 single-cell nucleus images. Computational analysis of large and complex data sets enhances the content and efficiency of single-cell analysis with the assistance of Artificial Intelligence (AI), which breaks through the super-resolution microscope's hardware limitation, such as specialized light sources with specific wavelengths, advanced optical components, and high-performance graphics cards. Our system can identify single-cell nucleus images that cannot be artificially distinguished with an accuracy of 95.3%. Overall, we build an ordinary microscope into a high-throughput analysis and high-content smarter microscope system, making it a candidate tool for Imaging cytology.

A multiscale approach to assess thermomechanical performance and force generation in nanorobotic microgels

We present a multiscale approach to characterize the performance of photothermally powered, nanorobotic 3D microgels. Optically triggered nanoactuators, consisting of a gold nanorod core and thermoresponsive pNIPMAM shell, are used as building blocks to generate the nanorobotic 3D microgels. We use microfluidic encapsulation to physically embed the nanoactuators in an alginate network, to form the microgel droplets. The nanoactuators respond to near-infrared light owing to the synergistic effects of plasmonic and thermoresponsive components, and the nanorobotic 3D microgels generate compressive force under the same light stimulus. We use a multiscale approach to characterize this behavior for both the nanoactuators and the assembled microgels via dynamic light scattering and fluorescence microscopy, respectively. A thermoresponsive fluorescent molecule, Rhodamine B, is integrated into alginate chains to monitor the temperature of the microgels (22-59 °C) during actuation at laser intensities up to 6.4 μW μm-2. Our findings show that nanoactuators and the microgels exhibit reversible deformation above the lower critical solution temperature of the thermoresponsive polymer at 42 °C. 785 nm laser light triggers the generation of 2D radial strain in nanoactuators at a maximum of 44%, which translates to an average 2D radial strain of 2.1% in the nanorobotic microgels at 26.4 vol% nanoactuator loading. We then use a semi-experimental approach to quantify the photothermally generated forces in the microgels. Finite element modeling coupled with experimental measurements shows that nanorobotic microgels generate up to 8.5 nN of force over encapsulated single cells. Overall, our method provides a comprehensive approach to characterizing the mechanical performance of nanorobotic hydrogel networks.

The microparticulate inks for bioprinting applications

Three-dimensional (3D) bioprinting has emerged as a groundbreaking technology for fabricating intricate and functional tissue constructs. Central to this technology are the bioinks, which provide structural support and mimic the extracellular environment, which is crucial for cellular executive function. This review summarizes the latest developments in microparticulate inks for 3D bioprinting and presents their inherent challenges. We categorize micro-particulate materials, including polymeric microparticles, tissue-derived microparticles, and bioactive inorganic microparticles, and introduce the microparticle ink formulations, including granular microparticles inks consisting of densely packed microparticles and composite microparticle inks comprising microparticles and interstitial matrix. The formulations of these microparticle inks are also delved into highlighting their capabilities as modular entities in 3D bioprinting. Finally, existing challenges and prospective research trajectories for advancing the design of microparticle inks for bioprinting are discussed.

Microfluidic Chips: Emerging Technologies for Adoptive Cell Immunotherapy

Adoptive cell therapy (ACT) is a personalized therapy that has shown great success in treating hematologic malignancies in clinic, and has also demonstrated potential applications for solid tumors. The process of ACT involves multiple steps, including the separation of desired cells from patient tissues, cell engineering by virus vector systems, and infusion back into patients after strict tests to guarantee the quality and safety of the products. ACT is an innovative medicine in development; however, the multi-step method is time-consuming and costly, and the preparation of the targeted adoptive cells remains a challenge. Microfluidic chips are a novel platform with the advantages of manipulating fluid in micro/nano scales, and have been developed for various biological research applications as well as ACT. The use of microfluidics to isolate, screen, and incubate cells in vitro has the advantages of high throughput, low cell damage, and fast amplification rates, which can greatly simplify ACT preparation steps and reduce costs. Moreover, the customizable microfluidic chips fit the personalized demands of ACT. In this mini-review, we describe the advantages and applications of microfluidic chips for cell sorting, cell screening, and cell culture in ACT compared to other existing methods. Finally, we discuss the challenges and potential outcomes of future microfluidics-related work in ACT.

Modular microfluidics for life sciences

The advancement of microfluidics has enabled numerous discoveries and technologies in life sciences. However, due to the lack of industry standards and configurability, the design and fabrication of microfluidic devices require highly skilled technicians. The diversity of microfluidic devices discourages biologists and chemists from applying this technique in their laboratories. Modular microfluidics, which integrates the standardized microfluidic modules into a whole, complex platform, brings the capability of configurability to conventional microfluidics. The exciting features, including portability, on-site deployability, and high customization motivate us to review the state-of-the-art modular microfluidics and discuss future perspectives. In this review, we first introduce the working mechanisms of the basic microfluidic modules and evaluate their feasibility as modular microfluidic components. Next, we explain the connection approaches among these microfluidic modules, and summarize the advantages of modular microfluidics over integrated microfluidics in biological applications. Finally, we discuss the challenge and future perspectives of modular microfluidics.

Thermally-modulated shape transition at the interface of soft gel filament and hydrophobic substrate

A liquid filament may pinch off into different shapes on interacting with a soft surface, as modulated by the interplay of inertial, capillary, and viscous forces. While similar shape transitions may intuitively be realized for more complex materials such as soft gel filaments as well, their intricate controllability towards deriving precise and stable morphological features remains challenging, as attributed to the complexities stemming from the underlying interfacial interactions over the relevant length and time scales during the sol-gel transition process. Circumventing these deficits in the reported literature, here we report a new means of precisely-controlled fabrication of gel microbeads via exploiting thermally-modulated instabilities of a soft filament atop a hydrophobic substrate. Our experiments reveal that abrupt morphological transitions of the gel material set in at a threshold temperature, resulting in spontaneous capillary thinning and filament breakup. We show that this phenomenon may be precisely modulated by an alteration in the hydration state of the gel material that may be preferentially dictated by its intrinsic glycerol content. Our results demonstrate that the consequent morphological transitions give rise to topologically-selective microbeads as an exclusive signature of the interfacial interactions of the gel material with the deformable hydrophobic interface underneath. Thus, intricate control may be imposed on the spatio-temporal evolution of the deforming gel, facilitating the inception of highly ordered structures of specific shapes and dimensionalities on demand. This is likely to advance the strategies of long shelf-life analytical biomaterial encapsulations via realizing one-step physical immobilization of bio-analytes on the bead surfaces as a new route to controlled materials processing, without demanding any resourced microfabrication facility or delicate consumable materials.

Microfluidic-templated cell-laden microgels fabricated using phototriggered imine-crosslinking as injectable and adaptable granular gels for bone regeneration

Injectable granular gels consisting of densely packed microgels serving as scaffolding biomaterial have recently shown great potential for applications in tissue regeneration, which allow administration via minimally invasive surgery, on-target cargo delivery, and high efficiency in nutrient/waste exchange. However, limitations such as insufficient mechanical strength, structural integrity, and uncontrollable differentiation of the encapsulated cells in the scaffolds hamper their further applications in the biomedical field. Herein, we developed a new class of granular gels via bottom-up assembly of cell-laden microgels via photo-triggered imine-crosslinking (PIC) chemistry based on the microfluidic technique. The particulate nature of the granular gels rendered them with shear-thinning and self-healing behavior, thereby functioning as an injectable and adaptable cellularized scaffold for bone tissue regeneration. Specifically, single cell-laden, monodisperse microgels composed of methacrylate- and o-nitrobenzene-functionalized hyaluronic acid and gelatin were prepared using a high-throughput microfluidic technique with a production rate up to 3.7 × 10⁸ microgels/hr, wherein the PIC chemistry alleviated the oxygen inhibition on free-radical polymerization and facilitated enhanced fabrication accuracy, accelerated gelation rate, and improved network strength. Further in vitro and in vivo studies demonstrated that the microgels can serve as carriers to support the activity of the encapsulated mesenchymal stem cells; these cell-laden microgels can also be used as cellularized bone fillers to induce the regeneration of bone tissues as evidenced by the in vivo experiment using the rat femoral condyle defect model. In general, these results represent a significant step toward the precise fabrication of engineered tissue mimics with single-cell resolution and high cell-density and can potentially offer a powerful tool for the design and applications of a next generation of tissue engineering strategy. STATEMENT OF SIGNIFICANCE: Using microfluidic droplet-based technology, we hereby developed a new class of injectable and moldable granular gels via bottom-up assembly of cell-laden microgels as a versatile platform for tissue regeneration. Phototriggered imine-crosslinking chemistry was introduced for microgel cross-linkage, which allowed for the fabrication of microgels with improved matrix homogeneity, accelerated gelation process, and enhanced mechanical strength. We demonstrated that the microgel building blocks within the granular gels facilitated the proliferation and differentiation of the encapsulated mesenchymal stem cells, which can further serve as a cellularized scaffold for the treatment of bone defects.

Advances in polymer-based cell encapsulation and its applications in tissue repair

Cell microencapsulation is a more widely accepted area of biological encapsulation. In most cases, it involves fixing cells in polymer scaffolds or semi-permeable hydrogel capsules, providing the environment for protecting cells, allowing the exchange of nutrients and oxygen, and protecting cells against the attack of the host immune system by preventing the entry of antibodies and cytotoxic immune cells. Hydrogel encapsulation provides a three-dimensional (3D) environment similar to that experienced in vivo, so it can maintain normal cellular functions to produce tissues similar to those in vivo. Embedded cells can be genetically modified to release specific therapeutic products directly at the target site, thereby eliminating the side effects of systemic treatments. Cellular microcarriers need to meet many extremely high standards regarding their biocompatibility, cytocompatibility, immunoseparation capacity, transport, mechanical, and chemical properties. In this article, we discuss the biopolymer gels used in tissue engineering applications and the brief introduction of cell encapsulation for therapeutic protein production. Also, we review polymer biomaterials and methods for preparing cell microcarriers for biomedical applications. At the same time, in order to improve the application performance of cell microcarriers in vivo, we also summarize the main limitations and improvement strategies of cell encapsulation. Finally, the main applications of polymer cell microcarriers in regenerative medicine are summarized.

Microencapsulation-based cell therapies

Mapping a new therapeutic route can be fraught with challenges, but recent developments in the preparation and properties of small particles combined with significant improvements to tried and tested techniques offer refined cell targeting with tremendous translational potential. Regenerating new cells through the use of compounds that regulate epigenetic pathways represents an attractive approach that is gaining increased attention for the treatment of several diseases including Type 1 Diabetes and cardiomyopathy. However, cells that have been regenerated using epigenetic agents will still encounter immunological barriers as well as limitations associated with their longevity and potency during transplantation. Strategies aimed at protecting these epigenetically regenerated cells from the host immune response include microencapsulation. Microencapsulation can provide new solutions for the treatment of many diseases. In particular, it offers an advantageous method of administering therapeutic materials and molecules that cannot be substituted by pharmacological substances. Promising clinical findings have shown the potential beneficial use of microencapsulation for islet transplantation as well as for cardiac, hepatic, and neuronal repair. For the treatment of diseases such as type I diabetes that requires insulin release regulated by the patient's metabolic needs, microencapsulation may be the most effective therapeutic strategy. However, new materials need to be developed, so that transplanted encapsulated cells are able to survive for longer periods in the host. In this article, we discuss microencapsulation strategies and chart recent progress in nanomedicine that offers new potential for this area in the future.

Single-cell droplet microfluidics for biomedical applications

This review focuses on the recent advances in the fundamentals of single-cell droplet microfluidics and its applications in biomedicine, providing insights into design and establishment of single-cell microsystems and their further performance.

How Microgels Can Improve the Impact of Organ-on-Chip and Microfluidic Devices for 3D Culture: Compartmentalization, Single Cell Encapsulation and Control on Cell Fate

The Organ-on-chip (OOC) devices represent the new frontier in biomedical research to produce micro-organoids and tissues for drug testing and regenerative medicine. The development of such miniaturized models requires the 3D culture of multiple cell types in a highly controlled microenvironment, opening new challenges in reproducing the extracellular matrix (ECM) experienced by cells in vivo. In this regard, cell-laden microgels (CLMs) represent a promising tool for 3D cell culturing and on-chip generation of micro-organs. The engineering of hydrogel matrix with properly balanced biochemical and biophysical cues enables the formation of tunable 3D cellular microenvironments and long-term in vitro cultures. This focused review provides an overview of the most recent applications of CLMs in microfluidic devices for organoids formation, highlighting microgels' roles in OOC development as well as insights into future research.

Thermo-responsive fluorinated surfactant for on-demand demulsification of microfluidic droplets

Droplet microfluidics has recently emerged as a powerful platform for a variety of biomedical applications including microreactors, bioactive compound encapsulation, and single cell culture and analysis; all these applications require long-term droplet stability, which, however, makes breaking the emulsion and retrieving the loaded samples difficult. Herein, we developed a novel class of thermo-responsive fluorosurfactants to control the droplet status simply by temperature. The surfactants were synthesized by coupling perfluorinated polyethers (PFPEs) with a thermo-responsive block of poly(N-isopropylacrylamide) (pNIPAM) or poly(2-ethyl-2-oxazoline) (pEtOx) with lower critical solution temperature (LCST). These diblock surfactants can stabilize the emulsion at temperatures below LCST due to the hydrophilic head, which became hydrophobic upon increasing the ambient temperature above LCST, thereby destabilizing the droplets and realizing demulsification simply via temperature control. The diblock surfactant can be applied for templating cell encapsulation using alginate microgels, which allowed one-step and high-throughput microfluidic generation of cell-laden microgels without compromising cell viability. This non-invasive, on-demand demulsification strategy provides a high degree of freedom for microencapsulation and on-demand recovery of the samples or reaction products within the droplets, which opens a new avenue for a wide range of applications of droplet-templating microfluidics.