M2+ Doping Induced Simultaneous Phase/Size Control and Remarkable Enhanced Upconversion Luminescence of NaLnF4 Probes for Optical-Guided Tiny Tumor Diagnosis

Uncovering Different Responses and Energy Mechanisms of Sensitizer and Activator in Host Manipulation for Upconversion Nanoparticles

Agile and efficient upconversion luminescence (UCL) fine-tuning strategies are the most demanded for in the frontier applications of highly doped upconversion nanoparticles (UCNPs). By doping Zn²⁺ ions into NaHoF₄ and NaGdF₄:Yb³⁺ shells using the oleate method, the separate influences of Zn²⁺ on Ho³⁺ and Yb³⁺ ions in UCL-related processes were analyzed in detail, revealing relevant UCL changes and underlying energy mechanisms from a novel but explicit perspective. Different behaviors of green and red UCL before and after Zn²⁺-ion doping were attributed to the disparities in the energy pathways and features of the sample structures. Herein, the populations of ⁵S₂/⁵F₄ and ⁵F₅ states, not the usually mentioned decay time, decided the UCL intensities of the NaHoF₄@NaYbF₄-structured highly doped UCNPs. The advantageous small sizes and intense single-band red UCL of these UCNPs were further developed by combining our previous strategies with introducing Zn²⁺ ions into the NaHoF₄ matrix. Overcoming energy loss by surface quenchers and Zn²⁺-triggered inner defects is the key factor in maximizing 4f-4f transitions. To the best of our knowledge, the current study is the first attempt to date to experimentally reveal separate impacts of the heteroions on activators and sensitizers in UCL-related processes and can deepen the theoretical investigation of Ho-based UCL for the broadened applications of NaHoF₄ UCNPs.

Radiolabeled nanomaterial for cancer diagnostics and therapeutics: principles and concepts

In the last three decades, radiopharmaceuticals have proven their effectiveness for cancer diagnosis and therapy. In parallel, the advances in nanotechnology have fueled a plethora of applications in biology and medicine. A convergence of these disciplines has emerged more recently with the advent of nanotechnology-aided radiopharmaceuticals. Capitalizing on the unique physical and functional properties of nanoparticles, radiolabeled nanomaterials or nano-radiopharmaceuticals have the potential to enhance imaging and therapy of human diseases. This article provides an overview of various radionuclides used in diagnostic, therapeutic, and theranostic applications, radionuclide production through different techniques, conventional radionuclide delivery systems, and advancements in the delivery systems for nanomaterials. The review also provides insights into fundamental concepts necessary to improve currently available radionuclide agents and formulate new nano-radiopharmaceuticals.

Polymer-Functionalized Upconversion Nanoparticles for Light/Imaging-Guided Drug Delivery

The strong upconversion luminescence (UCL) of upconversion nanoparticles (UCNPs) endows the nanoparticles with attractive features for combined imaging and drug delivery. UCNPs convert near-infrared (NIR) light into light of shorter wavelengths such as light in the ultraviolet (UV) and visible regions, which can be used for light-guided drug delivery. Although light-responsive drug delivery systems as such have been known for many years, their application in medicine is limited, as strong UV-light can be damaging to tissue; moreover, UV light will not penetrate deeply into the skin, an issue that UCNPs can now address. However, UCNPs, as obtained after synthesis, are usually hydrophobic and require further surface functionalization to be stable in plasma. Polymers can serve as versatile surface coatings, as they can provide good colloidal stability, prevent the formation of a protein corona, provide a matrix for drugs, and be stimuli-responsive. In this Review, we provide a brief overview of the most recent progress in the synthesis of UCNPs with different shapes/sizes. We will then discuss the purpose of polymer coating for drug delivery before summarizing the strategies to coat UCNPs with various polymers. We will introduce the different polymers that have so far been used to coat UCNPs with the purpose to create a drug delivery system, focusing in detail on light-responsive polymers. To expand the application of UCNPs to allow photothermal therapy or magnetic resonance imaging (MRI) or to simply enhance the loading capacity of drugs, UCNPs were often combined with other materials to generate multifunctional nanoparticles such as carbon-based NPs and nanoMOFs. We then conclude with a discussion on drug loading and release and summarize the current knowledge on the toxicity of these polymer-coated UCNPs.

Lanthanide ion (Ln3+ )-based upconversion sensor for quantification of food contaminants: A review

The food safety issue has gradually become the focus of attention in modern society. The presence of food contaminants poses a threat to human health and there are a number of interesting researches on the detection of food contaminants. Upconversion nanoparticles (UCNPs) are superior to other fluorescence materials, considering the benefits of large anti-Stokes shifts, high chemical stability, non-autofluorescence, good light penetration ability, and low toxicity. These properties render UCNPs promising candidates as luminescent labels in biodetection, which provides opportunities as a sensitive, accurate, and rapid detection method. This paper intended to review the research progress of food contaminants detection by UCNPs-based sensors. We have proposed the key criteria for UCNPs in the detection of food contaminants. Additionally, it highlighted the construction process of the UCNPs-based sensors, which includes the synthesis and modification of UCNPs, selection of the recognition elements, and consideration of the detection principle. Moreover, six kinds of food contaminants detected by UCNPs technology in the past 5 years have been summarized and discussed fairly. Last but not least, it is outlined that UCNPs have great potential to be applied in food safety detection and threw new insight into the challenges ahead.

Subcellular imaging and diagnosis of cancer using engineered nanoparticles

The advances in the synthesis of nanoparticles with engineered properties are reported to have profound applications in oncological disease detection via optical and multimodal imaging and therapy. Among various nanoparticle-assisted imaging techniques, engineered fluorescent nanoparticles show great promise from high contrast images and localized therapeutic applications. Of all the fluorescent nanoparticles available, the gold nanoparticles, carbon dots, and upconversion nanoparticles are emerging recently as the most promising candidates for diagnosis, treatment, and cancer monitoring. This review addresses the recent progress in engineering the properties of these emerging nanoparticles and their application for cancer diagnosis and therapy. In addition, the potential of these particles for subcellular imaging is also reviewed here.

Synthesis and characterization of Gd2O3: Er3+, Yb3+doped with Mg2+, Li+ions-effect on the photoluminescence and biological applications

Gd₂O₃:1% Er³⁺, 18% Yb³⁺,x% Mg²⁺(x = 0; 2.5; 4; 5; 6; 8;10; 20; 25; 50) and Gd₂O₃:1% Er³⁺, 18% Yb³⁺, 2,5% Mg²⁺,y% Li⁺(y = 0.5-2.5) nanoparticles were synthesized by homogenous precipitation method and calcined at 900 °C for 3 h in air atmosphere. Powder x-ray diffraction, scanning electron microscopy, cathodoluminescence, transmission electron microscopy, energy dispersive x-ray spectroscopy and photoluminescence techniques were employed to characterize the obtained nanoparticles. We observed a 8-fold increase in red luminescence for samples suspended in DMSO solution for 2.5% of Mg²⁺doping. The x-ray analysis shows that for the concentration of 2.5% Mg, the size of the crystallites in the NPs is the largest, which is mainly responsible for the increase in the intensity of the upconversion luminescence. But the addition of Li⁺ions did not improve the luminescence of the upconversion due to decreasing of crystallites size of the NPs. Synthesized nanomaterials with very effective upconverting luminescence, can act as luminescent markers inin vivoimaging. The cytotoxicity of the nanoparticles was evaluated on the 4T1 cell line for the first time.

Up-Conversion Luminescent Nanoparticles for Molecular Imaging, Cancer Diagnosis and Treatment

In the past few years, we have witnessed great development and application potential of various up-conversion luminescent nanoparticles (UCNPs) in the nanomedicine field. Based on the unique luminescent mechanism of UCNPs and the distinguishable features of cancer biomarkers and the microenvironment, an increasing number of smart UCNPs nanoprobes have been designed and widely applied to molecular imaging, cancer diagnosis, and treatment. Considerable technological success has been achieved, but the main obstacles to oncology nanomedicine is becoming an incomplete understanding of nano-bio interactions, the challenges regarding chemistry manufacturing and controls required for clinical translation and so on. This review highlights the progress of the design principles, synthesis and surface functionalization preparation, underlying applications and challenges of UCNPs-based probes for cancer bioimaging, diagnosis and treatment that capitalize on our growing understanding of tumor biology and smart nano-devices for accelerating the commercialization of UCNPs.

808 nm light triggered lanthanide nanoprobes with enhanced down-shifting emission beyond 1500 nm for imaging-guided resection surgery of tumor and vascular visualization

Lanthanide based nanoprobe with high efficient down-shifting second near-infrared (NIR-II, 1000-1700 nm) emission has emerged as a promising agent for tumor-associated vascular visualization. However, most of the developed lanthanide-based NIR-II-emissive probes are activated by 980 nm laser, leading to the concern of biological overheating effect. Herein, the high quality 808 nm laser activated NaYF4:Gd/Yb/Er/Nd/Ce@NaYF4:Nd core-shell nanoprobes with significantly improved NIR-II emission beyond 1500 nm and eliminated overheating effect were developed for imaging-guided resection surgery of tumor and vascular visualization. Methods: The core-shell nanoprobe with boosted NIR-II emission and eliminated heating effect was achieved with combination of Nd-sensitizing and Ce-doping strategies. The NIR-II optical imaging and toxicity assessment were demonstrated by in vivo and in vitro experiments. Results: The designed core-shell nanoprobe presented superior NIR-II emission beyond 1500 nm than the core only nanoparticle and NIR-II emission intensity was improved up to 11.0 times by further suppressing the upconversion (UC) pathway through doping Ce3+. More importantly, non-invasive tumor vascular imaging and NIR-II optical imaging-guided surgical resection of tumor were successfully achieved. Conclusion: It is expected that the Nd-sensitized lanthanide-based nanoprobe with significant improvement in NIR-II emission and eliminated overheating effect is a highly promising probe for NIR-II imaging, making it more competitive in non-invasive vascular imaging and imaging-guided tumor resection surgery.

Radiolabeling nanomaterials for multimodality imaging: New insights into nuclear medicine and cancer diagnosis

Nuclear medicine imaging has been developed as a powerful diagnostic approach for cancers by detecting gamma rays directly or indirectly from radionuclides to construct images with beneficial characteristics of high sensitivity, infinite penetration depth and quantitative capability. Current nuclear medicine imaging modalities mainly include single-photon emission computed tomography (SPECT) and positron emission tomography (PET) that require administration of radioactive tracers. In recent years, a vast number of radioactive tracers have been designed and constructed to improve nuclear medicine imaging performance toward early and accurate diagnosis of cancers. This review will discuss recent progress of nuclear medicine imaging tracers and associated biomedical imaging applications. Radiolabeling nanomaterials for rational development of tracers will be comprehensively reviewed with highlights on radiolabeling approaches (surface coupling, inner incorporation and interface engineering), providing profound understanding on radiolabeling chemistry and the associated imaging functionalities. The applications of radiolabeled nanomaterials in nuclear medicine imaging-related multimodality imaging will also be summarized with typical paradigms described. Finally, key challenges and new directions for future research will be discussed to guide further advancement and practical use of radiolabeled nanomaterials for imaging of cancers.

SC, Chidangil S, George SD. Post annealing induced manipulation of phase and upconversion luminescence of Cr3+ doped NaYF4:Yb,Er crystals

The role of post synthesis annealing at different temperatures (200–600 °C) on the structural as well as luminescence properties of NaY_80%F₄:Yb_17%,Er_3% prepared via a coprecipitation method was found to change the structure from a cubic to hexagonal phase with a concomitant increase in upconversion luminescence by 12 times for the green region and 17 times for the red region. Addition of the Cr³⁺ ions (5–20 mol%) into the host followed by post annealing at 200–600 °C causes that the samples to exhibit phase dependent and upconversion luminescence behavior that depend upon the doping concentration as well as the annealing temperature. The inductively coupled optical emission spectroscopy reveals that only 1/600 times of the desired volume of the co-dopant goes to the lattice and it can manifest visible spectral changes in the diffuse reflectance spectra of the samples. The samples co-doped with Cr³⁺ ion concentrations of 10–15% and post-annealed at 600 °C were found to have maximum emission with an enhancement factor of 24 for the green region and 33 for the red region. In addition, the laser power dependent studies reveal that even for the power density levels 3.69 W cm⁻² to 32.14 W cm⁻², the samples are in the saturation regime and most of the samples investigated here follow a single photon process, and a few samples show a slope value less than 1 for laser power dependent intensity plots. The results show the remarkable promise of controlled tailoring of the properties of upconversion crystals via post annealing and co-doping.

Co-dopant (Cr³⁺ ion) concentration as well as post annealing found to change the structural as well as luminescence properties of Cr³⁺ ion doped NaY_80%F₄:Yb_17%,Er_3% prepared via a co-precipitation method.

Room-temperature synthesis of near-ultraviolet light-excited Tb3+-doped NaBiF4 green-emitting nanoparticles for solid-state lighting

We reported a facile reaction technique to prepare Tb³⁺-doped NaBiF₄ green-emitting nanoparticles at room temperature.

Core@shell Fe3O4@Mn2+-doped NaYF4:Yb/Tm nanoparticles for triple-modality T1/T2-weighted MRI and NIR-to-NIR upconversion luminescence imaging agents

Core@shell structures of Fe₃O₄@Mn²⁺-doped NaYF₄:Yb/Tm nanoparticles (NPs) were prepared and then used for in vivo NIR to NIR (980 nm to 800 nm) imaging, and as dual-mode T₁/T₂-weighted MRI because of the co-existence of Fe₃O₄ and Mn²⁺ in the NPs.