An AIEgen as an Intrinsic Antibacterial Agent for Light-Up Detection and Inactivation of Intracellular Gram-Positive Bacteria

Illuminating the path: aggregation-induced emission for food contaminants detection

Food safety is a global concern that deeply affects human health. To ensure the profitability of the food industry and consumer safety, there is an urgent need to develop rapid, sensitive, accurate, and cost-effective detection methods for food contaminants. Recently, the Aggregation-Induced Emission (AIE) has been successfully used to detect food contaminants. AIEgens, fluorescent dyes that cause AIE, have several valuable properties including high quantum yields, photostability, and large Stokes shifts. This review provides a detailed introduction to the principles and advantages of AIE-triggered detection, followed by a focus on the past five years' applications of AIE in detecting various food contaminants including pesticides, veterinary drugs, mycotoxins, food additives, ions, pathogens, and biogenic amines. Each detection principle and component is comprehensively covered and explained. Moreover, the similarities and differences among different types of food contaminants are summarized, aiming to inspire future researchers. Finally, this review concludes with a discussion of the prospects for incorporating AIEgens more effectively into the detection of food contaminants.

Aggregation-Induced Emission (AIE), Life and Health

Light has profoundly impacted modern medicine and healthcare, with numerous luminescent agents and imaging techniques currently being used to assess health and treat diseases. As an emerging concept in luminescence, aggregation-induced emission (AIE) has shown great potential in biological applications due to its advantages in terms of brightness, biocompatibility, photostability, and positive correlation with concentration. This review provides a comprehensive summary of AIE luminogens applied in imaging of biological structure and dynamic physiological processes, disease diagnosis and treatment, and detection and monitoring of specific analytes, followed by representative works. Discussions on critical issues and perspectives on future directions are also included. This review aims to stimulate the interest of researchers from different fields, including chemistry, biology, materials science, medicine, etc., thus promoting the development of AIE in the fields of life and health.

Gentamicin Sulfate Grafted Magnetic GO Nanohybrids with Excellent Antibacterial Properties and Recyclability

In this study, magnetic graphene oxide (MGO) nanohybrids were first prepared by loading Fe₃O₄ NPs onto graphene oxide (GO). Then, GS-MGO nanohybrids were prepared by grafting gentamicin sulfate (GS) onto MGO directly using a simple amidation reaction. The prepared GS-MGO had the same magnetism as MGO. They exhibited excellent antibacterial ability against Gram-negative bacteria and Gram-positive bacteria. The GS-MGO had excellent antibacterial performance against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Listeria monocytogenes (L. monocytogenes). When the addition concentration of GS-MGO was 1.25 mg/mL, the calculated bacteriostatic ratios against E. coli and S. aureus achieved 89.8% and 100%, respectively. For L. monocytogenes, only 0.05 mg/mL of GS-MGO had an antibacterial ratio as high as 99%. In addition, the prepared GS-MGO nanohybrids also exhibited excellent non-leaching activity with good recycling antibacterial ability. After eight times antibacterial tests, GS-MGO nanohybrids still exhibited an excellent inhibition effect on E. coli, S. aureus, and L. monocytogenes. Therefore, as a non-leaching antibacterial agent, the fabricated GS-MGO nanohybrid had dramatic antibacterial properties and also showed great recycling ability. Thus, it displayed great potential in the design of novel recycling antibacterial agents with non-leaching activity.

Photosensitizers with aggregation-induced far-red/near-infrared emission for versatile visualization and broad-spectrum photodynamic killing of pathogenic microbes

The exploration of photosensitizers with aggregation-induced emission (AIE PSs) for efficient visualization and broad-spectrum photodynamic killing of pathogenic microbes is a significant task. Herein, two far-red/near-infrared AIE-active PSs (TBTPy and TBTCy) were attained to show efficient Type I and Type II ROS generation, benefiting from the efficient ISC processes. The attained AIE PSs, especially TBTPy with bright emission, showed advantages in discriminating G⁺ bacteria over G^- bacteria, and distinguishing dead E. coli from lived one. Both TBTPy and TBTCy have the capacity of broad-spectrum photodynamic killing of pathogenic microbes in vitro with considerable safety for mammalian cells. Antimicrobial mechanism is found to be changing osmotic pressure of cytoplasm in E. coli, causing cell deformation and destruction of S. aureus and C. albicans. In vivo anti-infection experiment demonstrated AIE PSs can accelerate the healing process of the burned wounds on rats infected by methicillin-resistant S. aureus (MRSA) or E. coli, indicating their potential to treat tertiary burns in clinical application. Therefore, the attained AIE PSs hold great promise as antimicrobial candidates in infective therapeutic application.

Specific discrimination and efficient elimination of gram-positive bacteria by an aggregation-induced emission-active ruthenium (II) photosensitizer

The infections caused by Gram-positive bacteria (G⁺) have seriously endangered public heath due to their high morbidity and mortality. Therefore, it is urgent to develop a multifunctional system for selective recognition, imaging and efficient eradication of G⁺. Aggregation-induced emission materials have shown great promise for microbial detection and antimicrobial therapy. In this paper, a multifunctional ruthenium (II) polypyridine complex Ru2 with aggregation-induced emission (AIE) characteristic, was developed and used for selective discrimination and efficient extermination of G⁺ from other bacteria with unique selectivity. The selective G⁺ recognition benefited from the interaction between lipoteichoic acids (LTA) and Ru2. Accumulation of Ru2 on the G⁺ membrane turned on its AIE luminescence and allowed specific G⁺ staining. Meanwhile, Ru2 under light irradiation also possessed robust antibacterial activity for G⁺in vitro and in vivo antibacterial experiments. To the best of our knowledge, Ru2 is the first Ru-based AIEgen photosensitizer for simultaneous dual applications of G⁺ detection and treatment, and inspires the development of promising antibacterial agents in the future.

Intracellular infection-responsive release of NO and peptides for synergistic bacterial eradication

Bacteria have the ability to invade and survive in host cells to form intracellular bacteria (ICBs), and challenges remain in the intracellular delivery of sufficient antibiotics to remove ICBs. Herein, antimicrobial peptide of epsilon-poly-l-lysine (ePL) and nitric oxide (NO) donors are integrated into nanoparticles (NPs) for ICB treatment without using any antibiotics. ePL was grafted with dodecyl alcohol through ethyl dichlorophosphate to prepare ePL-C₁₂, followed by conjugation of nitrate-functionalized NO donors to obtain ePL-C₁₂NO. PNO/C NPs were prepared from mixtures of ePL-C₁₂NO and ePL-C₁₂ and the optimal ePL-C₁₂NO ratio was 7% in terms of bactericidal effect and macrophage toxicity. Once being engulfed by bacteria-infected macrophages (BIMs), NPs are disintegrated when encountering with ICB-secreted phosphatase, and the NP degradation accelerates intracellular NO release in response to the elevated glutathione levels in BIMs. The selective and abrupt release of NO and ePL with different antimicrobial mechanisms exhibits synergistic eradication of ICBs and no apparent toxicity to macrophages. ICB-infected mice show persistent weight loss and 100% of mortality rate after treatment with ePL-C₁₂ NPs for 7 days, while PNO/C treatment causes entire survival of infected mice and full recovery of body weights to normal values. ICB-infected mice are also accompanied with apparent hepatomegaly and splenomegaly, which are only eliminated by PNO/C treatment without associated any pathological abnormality. PNO/C treatment reduces bacterial burdens in livers (2.45 log), spleens (2.16 log) and kidneys (3.46 log) and restores hepatic and renal function to normal levels. Thus, this study provides a feasible strategy to selectively release NO and cationic peptides in response to intracellular infection-derived signals, achieving synergistic eradication of ICBs and function restoration of the main tissues.

Bioactive AIEgens Tailored for Specific and Sensitive Theranostics of Gram-Positive Bacterial Infection

Diseases caused by bacterial infections are increasingly threatening human health. As a major part of the microbial family, Gram-positive bacteria induce severe infections in hospitals and communities. Therefore, developing antibacterial materials that can recognize bacteria and specifically kill them is significant to cope with fatal bacterial infection. To this end, we designed and prepared a series of positively charged photosensitizers with an aggregation-induced emission feature and a type I reactive oxygen species (ROS) generation ability. Based on a molecular engineering strategy, the PS abbreviated to MTTTPy that owns a superior ROS generation ability and red emission in aggregation is obtained by adjusting bridging groups. Due to the unique molecular structure, MTTTPy can sensitively and specifically recognize and light up Gram-positive bacteria through electrostatic adsorption and void permeability. In addition, it can kill 95% of the recognized bacteria at a low concentration of 0.5 μM by generating oxygen-independent ROS under white light irradiation. Both in vitro and in vivo studies verify the sensitive and specific recognition and killing effect of MTTTPy toward Gram-positive bacteria. This work provides superior material-integrated diagnosis and treatment for Gram-positive bacteria-caused infectious diseases and shows potential for addressing bacterial resistance.

In Situ Surface-Directed Assembly of 2D Metal Nanoplatelets for Drug-Free Treatment of Antibiotic-Resistant Bacteria

The development of antibiotic resistance among bacterial strains is a major global public health concern. To address this, drug-free antibacterial approaches are needed. Copper surfaces have long been known for their antibacterial properties. In this work, a one-step surface modification technique is used to assemble 2D copper chloride nanoplatelets directly onto copper surfaces such as copper tape, transmission electron microscopy (TEM) grids, electrodes, and granules. The nanoplatelets are formed using copper ions from the copper surfaces, enabling their direct assembly onto these surfaces in a one-step process that does not require separate nanoparticle synthesis. The synthesis of the nanoplatelets is confirmed with TEM, scanning electron microscopy, energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). Antibacterial properties of the Cu nanoplatelets are demonstrated in multidrug-resistant (MDR) Escherichia coli, MDR Acinetobacter baumannii, MDR Staphylococcus aureus, E. coli, and Streptococcus mutans. Nanoplatelets lead to a marked improvement in antibacterial properties compared to the copper surfaces alone, affecting bacterial cell morphology, preventing bacterial cell division, reducing their viability, damaging bacterial DNA, and altering protein expression. This work presents a robust method to directly assemble copper nanoplatelets onto any copper surface to imbue it with improved antibacterial properties.

A novel furo[3,2-c]pyridine-based AIE photosensitizer for specific imaging and photodynamic ablation of Gram-positive bacteria

An Rh-catalyzed tandem reaction was performed to construct an AIE-active furo[2,3-c]pyridine-based photosensitizer, named LIQ-TF. LIQ-TF showed near-infrared emission with high quantum yield, and high ¹O₂ and ˙OH generation efficiency, and could be used for specific imaging and photodynamic ablation of Gram-positive bacteria in vitro and in vivo, showing great potential for combating multiple drug-resistant bacteria.

Aggregation-Induced Emission Nanoparticles for Single Near-Infrared Light-Triggered Photodynamic and Photothermal Antibacterial Therapy

Phototheranostics is a potential area for precision medicine, which has received increasing attention for antibacterial applications. Integrating all phototheranostic modalities in a single molecule and achieving precise spatial colocalization is a challenging task because of the complexity of energy dissipation and molecular design. Here, a type of quaternary amine functionalized aggregation-induced emission (AIE), AIEgen, was synthesized and used to produce singlet oxygen (¹O₂) and heat, which were used to eradicate the bacteria. With the introduction of the positive charge in AIEgen, AIE nanoparticles (AIE NPs) could selectively target bacteria. Notably, the AIE NPs displayed obvious antibacterial performance against Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli). The antibacterial rates of AIE NPs were as high as 99.9% and 99.8% for S. aureus and E. coli, respectively. Therefore, our results suggested the potential of AIE NPs acting as broad-spectrum antimicrobial materials, which provided a strategy for treating different microorganisms.

Photoactivated Release of Nitric Oxide and Antimicrobial Peptide Derivatives for Synergistic Therapy of Bacterial Skin Abscesses

It is of paramount importance to develop novel approaches for combating bacterial resistance and the integration of different antibacterial mechanisms is essential to achieve synergistic bactericidal efficiency while reducing the associated side effects. Herein, amphiphilic antimicrobial copolymers derived from poly-l-lysine (PLL), black phosphorus quantum dots (BPQDs) as near-infrared (NIR) sensitizer, and S-nitrosocysteamine (SNO) as nitric oxide (NO) donor, are assembled into PELI@BPQD-SNO nanoparticles through electrostatic interactions. Amphiphilic copolymers with isopentanyl grafts on PLL at a ratio of 50% achieve an optimal balance between antibacterial activity and hemolysis rate. Photothermal effect of BPQDs leads to NIR-responsive release of NO and the combination with amphiphilic copolymers mutually enhances long-term inhibition of bacterial growth. In an S. aureus-infected subcutaneous abscess model, the bactericidal rate of PELI@BPQD-SNO/NIR treatment reaches nearly 99.6%, which is significantly higher than those without NO release (38%) or amphiphilic copolymers (24%) or NIR irradiation (17%). PELI@BPQD-SNO/NIR treatment shows full recovery of infected wounds, efficient retardation of inflammatory cells, and reconstruction of blood vessels similar to those of healthy skin. Therefore, the electrostatic assembly demonstrates a promising strategy to deliver charged therapeutic agents and the photoactivated release of NO and amphiphilic copolymers achieves synergistic antibacterial efficacy without using any antibiotics.