Highly Sensitive, Mechanically Stable Nanopore Sensors for DNA Analysis

Exploring ssDNA translocation through α-hemolysin using coarse-grained steered molecular dynamics

Protein nanopores have proven to be effective for single-molecule studies, particularly for single-stranded DNA (ssDNA) translocation. Previous experiments demonstrated their ability to distinguish differences in purine and pyrimidine bases and in the orientation of the ssDNA molecule inside nanopores. Unfortunately, the microscopic details of ssDNA translocation over experimental time scales, which are not accessible through all-atom molecular dynamics (MD), have yet to be examined. However, coarse-grained (CG) MD simulations enable systems to be simulated over longer characteristic times closer to experiments than all-atom MD. This paper studies ssDNA translocation through α-hemolysin nanopores exploiting steered MD using the MARTINI CG force field. The impacts of the sequence length, orientation inside the nanopore and DNA charges on translocation dynamics as well as the conformational dynamics of ssDNA during the translocation are explored. Our results highlight the efficacy of CG molecular dynamics in capturing the experimental properties of ssDNA translocation, including a wide distribution in translocation times per base. In particular, the phosphate charges of the DNA molecule are crucial in the translocation dynamics and impact the translocation rate. Additionally, the influence of the ssDNA molecule orientation on the translocation rate is explained by the conformational differences of ssDNA inside the nanopore during its translocation. Our study emphasizes the significance of obtaining sufficient statistics via CG MD, which can elucidate the great variety of translocation processes.

Is the Mediterranean Low Fodmap Diet Effective in Managing Irritable Bowel Syndrome Symptoms and Gut Microbiota? An Innovative Research Protocol

INTRODUCTION

Irritable bowel syndrome (IBS) symptoms can be effectively managed with the low FODMAP diet. However, its efficacy in reducing inflammation is not yet proven. On the contrary, the Mediterranean diet has anti-inflammatory properties with proven efficacy in treating chronic low-grade inflammation-related diseases.

AIM

To publicly share our protocol evaluating the efficacy of the Mediterranean low-FODMAP (MED-LFD) versus NICE recommendations (British National Institute for Health and Care Excellence) diet in managing IBS symptoms and quality of life.

MATERIALS AND METHODS

Participants meeting the Rome IV criteria will be randomly assigned to MED-LFD or NICE recommendations and they will be followed for six months. Efficacy, symptom relief, quality of life and mental health will be assessed using validated questionnaires. In addition, fecal samples will be analyzed to assess gut microbiota, and to measure branched and short-chain fatty acids, and volatile organic compounds (metabolic byproducts from bacteria). Expected results and discussion: By publicly sharing this clinical study protocol, we aim to improve research quality in the field of IBS management by allowing for peer review feedback, preventing data manipulation, reducing redundant research efforts, mitigating publication bias, and empowering patient decision-making. We expect that this protocol will show that MED-LFD can effectively alleviate IBS symptoms and it will provide pathophysiology insights on its efficacy. The new dietary pattern that combines the LFD and the MED approaches allows for the observation of the synergistic action of both diets, with the MED's anti-inflammatory and prebiotic properties enhancing the effects of the LFD while minimizing its limitations. Identifier in Clinical Trials: NCT03997708.

Detection of Glutamate Decarboxylase Antibodies and Simultaneous Multi-Molecular Translocation Exploration by Glass Nanopores

Glutamic acid decarboxylase antibody (GADAb) has emerged as a significant biomarker for clinical diagnosis and prognosis in type 1 diabetes (T1D). In this study, we investigated the potential utilization of glass capillary solid-state nanopores as a cost-effective and easily preparable platform for the detection of individual antigens, antibodies, and antigen-antibody complexes without necessitating any modifications to the nanopores. Our findings revealed notable characteristic variations in the translocation events of glutamic acid decarboxylase (GAD65) through nanopores under different voltage conditions, discovered that anomalous phenomenon of protein translocation events increasing with voltage may potentially be caused by the crowding of multiple proteins in the nanopores, and demonstrated that there are multiple components in the polyclonal antibodies (GADAb-poly). Furthermore, we achieved successful differentiation between GAD65, GADAb, and GADAb-GAD65 complexes. These results offer promising prospects for the development of a rapid and reliable GADAb detection method, which holds the potential to be applied in patient serum samples, thereby facilitating a label-free, cost-effective, and early diagnosis of type I diabetes.

DNA sequencing via molecular dynamics simulation with functionalized graphene nanopore

Through this research, functionalized graphene nanopores are used to verify how effective such an apparatus for DNA sequencing is. The circular symmetric pores are functionalized with hydrogen and a hydroxyl group bonded with carbon atoms of the pore rim. Plus, two adenine bases are also put at the rim perimeter to verify whether such a combination would lead to base detection. A homopolymer of single-stranded DNA (ssDNA) is pulled through a nanopore using steered molecular dynamics (SMD) simulation. Pulling force profile, moving fashion of ssDNA in irreversible DNA pulling as well as the base orientation during translocation relative to the graphene plane, called beta angle, are assessed. Based on the studied parameters, SMD force, and base orientation, the hydrogenated and hydroxylated pores do not show a clear distinction between bases, while the adenine-functionalized pore can distinguish between adenine and cytosine. Therefore, there may be some hope for achieving single-base sequencing, while further research is needed.

Portable nanopore-sequencing technology: Trends in development and applications

Sequencing technology is the most commonly used technology in molecular biology research and an essential pillar for the development and applications of molecular biology. Since 1977, when the first generation of sequencing technology opened the door to interpreting the genetic code, sequencing technology has been developing for three generations. It has applications in all aspects of life and scientific research, such as disease diagnosis, drug target discovery, pathological research, species protection, and SARS-CoV-2 detection. However, the first- and second-generation sequencing technology relied on fluorescence detection systems and DNA polymerization enzyme systems, which increased the cost of sequencing technology and limited its scope of applications. The third-generation sequencing technology performs PCR-free and single-molecule sequencing, but it still depends on the fluorescence detection device. To break through these limitations, researchers have made arduous efforts to develop a new advanced portable sequencing technology represented by nanopore sequencing. Nanopore technology has the advantages of small size and convenient portability, independent of biochemical reagents, and direct reading using physical methods. This paper reviews the research and development process of nanopore sequencing technology (NST) from the laboratory to commercially viable tools; discusses the main types of nanopore sequencing technologies and their various applications in solving a wide range of real-world problems. In addition, the paper collates the analysis tools necessary for performing different processing tasks in nanopore sequencing. Finally, we highlight the challenges of NST and its future research and application directions.

Solid-State Nanopore Array: Manufacturing and Applications

Nanopore brings extraordinary properties for a variety of potential applications in various industrial sectors. Since manufacturing of solid-state nanopore is first reported in 2001, solid-state nanopore has become a hot topic in the recent years. An increasing number of manufacturing methods have been reported, with continuously decreased sizes from hundreds of nanometers at the beginning to ≈1 nm until recently. To enable more robust, sensitive, and reliable devices required by the industry, researchers have started to explore the possible methods to manufacture nanopore array which presents unprecedented challenges on the fabrication efficiency, accuracy and repeatability, applicable materials, and cost. As a result, the exploration of fabrication of nanopore array is still in the fledging period with various bottlenecks. In this article, a wide range of methods of manufacturing nanopores are summarized along with their achievable morphologies, sizes, inner structures for characterizing the main features, based on which the manufacturing of nanopore array is further addressed. To give a more specific idea on the potential applications of nanopore array, some representative practices are introduced such as DNA/RNA sequencing, energy conversion and storage, water desalination, nanosensors, nanoreactors, and dialysis.

Solid-state nanopore: chemical modifications, interactions, and functionalities

Nanopore technology is a burgeoning detection technology for single-molecular sensing and ion rectification. Solid-state nanopores have attracted more and more attention because of their higher stability and tunability than biological nanopores. However, solid-state nanopores still suffer the drawbacks of low signal-to-noise ratio and low resolution, which hinders their practical applications. Thus, developing operatical and useful methods to overcome the shortages of solid-state nanopores is urgently needed. Here, we summarize the recent research on nanopore modification to achieve this goal. Modifying solid-state nanopores with different coating molecules can improve the selectivity, sensitivity, and stability of nanopores. The modified molecules can introduce different functions into the nanopores, greatly expanding the applications of this novel detection technology. We hope that this review of nanopore modification will provide new ideas for this field.

Controllable Shrinking Fabrication of Solid-State Nanopores

Nanopores have attracted widespread attention in DNA sequencing and protein or biomarker detection, owning to the single-molecule-scale detection accuracy. Despite the most use of naturally biological nanopores before, solid-state nanopores are widely developed with strong robustness, controllable sizes and geometries, a wide range of materials available, as well as flexible manufacturing. Therefore, various techniques typically based on focused ion beam or electron beam have been explored to drill nanopores directly on free-standing nanofilms. To further reduce and sculpt the pore size and shape for nano or sub-nano space-time sensing precision, various controllable shrinking technologies have been employed. Correspondingly, high-energy-beam-induced contraction with direct visual feedback represents the most widely used. The ability to change the pore diameter was attributed to surface tension induced original material migration into the nanopore center or new material deposition on the nanopore surface. This paper reviews typical solid-state nanopore shrinkage technologies, based on the careful summary of their principles and characteristics in particularly size and morphology changes. Furthermore, the advantages and disadvantages of different methods have also been compared completely. Finally, this review concludes with an optimistic outlook on the future of solid-state nanopores.

Fabrication of solid-state nanopores

Nanopores are valuable single-molecule sensing tools that have been widely applied to the detection of DNA, RNA, proteins, viruses, glycans, etc. The prominent sensing platform is helping to improve our health-related quality of life and accelerate the rapid realization of precision medicine. Solid-state nanopores have made rapid progress in the past decades due to their flexible size, structure and compatibility with semiconductor fabrication processes. With the development of semiconductor fabrication techniques, materials science and surface chemistry, nanopore preparation and modification technologies have made great breakthroughs. To date, various solid-state nanopore materials, processing technologies, and modification methods are available to us. In the review, we outline the recent advances in nanopores fabrication and analyze the virtues and limitations of various membrane materials and nanopores drilling techniques.

DNA sequencing based on electronic tunneling in a gold nanogap: a first-principles study

Deoxyribonucleic acid (DNA) sequencing has found wide applications in medicine including treatment of diseases, diagnosis and genetics studies. Rapid and cost-effective DNA sequencing has been achieved by measuring the transverse electronic conductance as a single-stranded DNA is driven through a nanojunction. With the aim of improving the accuracy and sensitivity of DNA sequencing, we investigate the electron transport properties of DNA nucleobases within gold nanogaps based on first-principles quantum transport simulations. Considering the fact that the DNA bases can rotate within the nanogap during measurements, different nucleobase orientations and their corresponding residence time within the nanogap are explicitly taken into account based on their energetics. This allows us to obtain an average current that can be compared directly to experimental measurements. Our results indicate that bare gold electrodes show low distinguishability among the four DNA nucleobases while the distinguishability can be substantially enhanced with sulfur atom decorated electrodes. We further optimized the size of the nanogap by maximizing the residence time of the desired orientation.

Nanopore chip with self-aligned transverse tunneling junction for DNA detection

To achieve better signal quality and resolution in nanopore sequencing, there has been strong interest in quantum tunneling based detection which requires integration of tunneling junctions in nanopores. However, there has been very limited success due to precision and reproducibility issues. Here we report a new strategy based on feedback-controlled electrochemical processes in a confined nanoscale space to construct nanopore devices with self-aligned transverse tunneling junctions, all embedded on a nanofluidic chip. We demonstrate high-yield (>93%) correlated detection of translocating DNAs from both the ionic channel and the tunneling junction with enriched event rate. We also observed events attributed to non-translocating DNA making contact with the transverse electrodes. Existing challenges for precise sequencing are discussed, including fast translocation speed, and interference from transient electrostatic signals from fast-moving DNAs. Our work can serve as a first step to provide an accessible, and reproducible platform enabling further optimizations for tunneling-based DNA detection, and potentially sequencing.

DNA sequencing: an overview of solid-state and biological nanopore-based methods

The field of sequencing is a topic of significant interest since its emergence and has become increasingly important over time. Impressive achievements have been obtained in this field, especially in relations to DNA and RNA sequencing. Since the first achievements by Sanger and colleagues in the 1950s, many sequencing techniques have been developed, while others have disappeared. DNA sequencing has undergone three generations of major evolution. Each generation has its own specifications that are mentioned briefly. Among these generations, nanopore sequencing has its own exciting characteristics that have been given more attention here. Among pioneer technologies being used by the third-generation techniques, nanopores, either biological or solid-state, have been experimentally or theoretically extensively studied. All sequencing technologies have their own advantages and disadvantages, so nanopores are not free from this general rule. It is also generally pointed out what research has been done to overcome the obstacles. In this review, biological and solid-state nanopores are elaborated on, and applications of them are also discussed briefly.

In-plane graphene/h-BN/graphene heterostructures with nanopores for electrical detection of DNA nucleotides

The in-plane heterostructure of graphene and h-BN has unique physical and electrical characteristics, which can be exploited for single-molecule DNA sequencing. On this account, we propose a nanostructure based on a nanopore in graphene/h-BN/graphene heterostructures as a viable approach for in-plane electrical detection. The insulating h-BN layer changes the charge transport to the quantum tunneling regime, which is very sensitive to the electrostatic interactions induced by nucleotides during their translocation through the nanopore. Density functional theory (DFT) is utilized to study the membrane/nanopore interactions as well as their interactions with different nucleotides (dAMP, dGMP, dCMP, and dTMP). The results indicate that the nucleotides show stronger interactions with nanopores in h-BN rather than nanopores in pristine graphene. For the calculation of electronic transport, non-equilibrium Green's function (NEGF) formalism at the first principles level is employed. The in-plane currents at different applied voltages are calculated in the presence of different nucleotides in the nanopore. The sensitivity of the proposed nanostructure towards different nucleotides is measured based on the current modulation induced by each nucleotide. The graphene/h-BN/graphene heterostructure shows higher sensitivity toward different nucleotides compared to a similar structure consisting of pristine graphene and can be considered as a promising candidate for DNA sequencing applications.

Electrochemistry of the Silicon Oxide Dielectric Layer: Principles, Electrochemical Reactions, and Perspectives

Electrochemistry of the silicon oxide dielectric layer, a notable insulator often used as a gate oxide, is counterintuitive, but addresses fundamental questions to yield novel scientific discoveries. In this minireview, the fundamental electron transfer mechanism of silicon oxide in the electrolyte solution is elucidated. The possible electrochemical reactions to date are discussed in detail, providing numerous potential areas of application which are elaborated and justified. This minireview not only provides background but also guides future research.

Simple Fabrication of Solid-State Nanopores on a Carbon Film

Solid-state nanopores are widely used as a platform for stochastic nanopore sensing because they can provide better robustness, controllable pore size, and higher integrability than biological nanopores. However, the fabrication procedures, including thin film preparation and nanopore formation, require advanced micro-and nano-fabrication techniques. Here, we describe the simple fabrication of solid-state nanopores in a commercially available material: a flat thin carbon film-coated micro-grid for a transmission electron microscope (TEM). We attempted two general methods for nanopore fabrication in the carbon film. The first method was a scanning TEM (STEM) electron beam method. Nanopores were fabricated by irradiating a focused electron beam on the carbon membrane on micro-grids, resulting in the production of nanopores with pore diameters ranging from 2 to 135 nm. The second attempt was a dielectric breakdown method. In this method, nanopores were fabricated by applying a transmembrane voltage of 10 or 30 V through the carbon film on micro-grids. As a result, nanopores with pore diameters ranging from 3.7 to 1345 nm were obtained. Since these nanopores were successfully fabricated in the commercially available carbon thin film using readily available devices, we believe that these solid-state nanopores offer great utility in the field of nanopore research.

Devices for Nanoscale Guiding of DNA through a 2D Nanopore

We fabricate on-chip solid-state nanofluidic-2D nanopore systems that can limit the range of motion for DNA in the sensing region of a nanopore. We do so by creating devices containing one or more silicon nitride pores and silicon nitride pillars supporting a 2D pore that orient DNA within a nanopore device to a restricted geometry, yet allow the free motion of ions to maintain a high signal-to-noise ratio. We discuss two concepts with two and three independent electrical connections and corresponding nanopore chip device architectures to achieve this goal in practice. Here, we describe device fabrication and transmission electron microscope (TEM) images, and provide simulated translocations based on the finite element analysis in 3D to demonstrate its merit. In both methods, there is a main 2D nanopore which we refer to as a "sensing" nanopore (monolayer MoS₂ in this paper). A secondary layer is either an array of guiding pores sharing the same electrode pair as the sensing pore (Method 1) or a single, independently contacted, guiding pore (Method 2). These pores are constructed parallel to the "sensing" pore and serve as "guiding" elements to stretch and feed DNA into the atomically thin sensing pore. We discuss the practical implementation of these concepts with nanofluidic and Si-based technology, including detailed fabrication steps and challenges involved for DNA applications in solution.

Instrumentational implementation for parallelized nanopore electrochemical measurements

Nanopore electrochemistry, as one of the promising tools for single molecule sensing, has proved its capability in DNA sequencing and protein analysis. To achieve a high resolution for obtaining molecular information, the nanopore electrochemical technique not only urgently requires an appropriate nanopore sensing interface with atomic resolution but also requires advanced instrumentation and its related data processing methods. In order to reveal the fundamental biological process and process the point-of-care diagnosis, it is necessary to use a nanopore sensing instrument with a high amperometric and temporal resolution as well as high throughput. The development of the instrumentation requires multi-disciplinary collaboration involving preparing a sensitive nanopore interface, low-noise circuit design, and intelligent data analysis. In this review, we have summarized the recent improvements in the nanopore sensing interface as well as discussed the higher throughput achieved by nanopore arrays and intelligent nanopore data analysis methods. The parallelized nanopore instrumentation could be popularized to all ranges of single-molecule applications.

Single-Entity Detection With TEM-Fabricated Nanopores

Nanopore-based single-entity detection shows immense potential in sensing and sequencing technologies. Solid-state nanopores permit unprecedented detail while preserving mechanical robustness, reusability, adjustable pore size, and stability in different physical and chemical environments. The transmission electron microscope (TEM) has evolved into a powerful tool for fabricating and characterizing nanometer-sized pores within a solid-state ultrathin membrane. By detecting differences in the ionic current signals due to single-entity translocation through the nanopore, solid-state nanopores can enable gene sequencing and single molecule/nanoparticle detection with high sensitivity, improved acquisition speed, and low cost. Here we briefly discuss the recent progress in the modification and characterization of TEM-fabricated nanopores. Moreover, we highlight some key applications of these nanopores in nucleic acids, protein, and nanoparticle detection. Additionally, we discuss the future of computer simulations in DNA and protein sequencing strategies. We also attempt to identify the challenges and discuss the future development of nanopore-detection technology aiming to promote the next-generation sequencing technology.

In situ solid-state nanopore fabrication

Nanopores in solid-state membranes are promising for a wide range of applications including DNA sequencing, ultra-dilute analyte detection, protein analysis, and polymer data storage. Techniques to fabricate solid-state nanopores have typically been time consuming or lacked the resolution to create pores with diameters down to a few nanometres, as required for the above applications. In recent years, several methods to fabricate nanopores in electrolyte environments have been demonstrated. These in situ methods include controlled breakdown (CBD), electrochemical reactions (ECR), laser etching and laser-assisted controlled breakdown (la-CBD). These techniques are democratising solid-state nanopores by providing the ability to fabricate pores with diameters down to a few nanometres (i.e. comparable to the size of many analytes) in a matter of minutes using relatively simple equipment. Here we review these in situ solid-state nanopore fabrication techniques and highlight the challenges and advantages of each method. Furthermore we compare these techniques by their desired application and provide insights into future research directions for in situ nanopore fabrication methods.

Single nucleotide detection using bilayer MoS2 nanopores with high efficiency

Single nucleotide detection is important for early detection of diseases and for DNA sequencing. Monolayer (ML) MoS₂ nanopores have been used to identify and distinguish single nucleotides with good signal-to-noise ratio in the recent past. Here, we use a bilayer (BL) MoS₂ nanopore (∼1.3 nm thick) to detect distinct single nucleotides with high spatial resolution and longer dwell time. In this study, the performance of similar sized (<3 nm) ML and BL MoS₂ nanopores for detection of a single nucleotide has been compared. Both single nucleotide and single stranded DNA translocations through them are studied. For single nucleotide detection, we observe that BL MoS₂ nanopores demonstrate twice the dwell time as compared to ML MoS₂ nanopores with 95% confidence. Single nucleotide detection rate for BL MoS₂ nanopores (50–60 nucleotides per s) is five-fold higher as compared to ML MoS₂ nanopores (10–15 nucleotides per s) in 10 pM analyte concentration. For single stranded DNA, we observe 89% (for 60 DNA molecules detected) single nucleotide detection efficiency with BL MoS₂ nanopores as compared to 85% for ML MoS₂. The DNA sequencing efficiency through BL MoS₂ nanopores is also found to be 8–10% better than through ML MoS₂ nanopores, irrespective of DNA sequencing orientation. Thus, owing to improved analyte/nanopore charge interaction BL MoS₂ nanopores can be used for single nucleotide detection with high resolution due to longer dwell time, detection rate and efficiency. This study demonstrates the improved ability of BL MoS₂ nanopores in sequencing DNA with 8–10% higher efficiency, two-times temporally resolved single-nucleotide current signatures and five-times higher detection rate, compared to ML MoS₂ nanopores.

Bilayer MoS₂ nanopores are suitable for fast and high-efficiency single nucleotide detection and DNA sequencing due to fast analyte capture and improved dwell time.

The Influence of Electric Field Intensity and Particle Length on the Electrokinetic Transport of Cylindrical Particles Passing through Nanopore

The electric transport of nanoparticles passing through nanopores leads to a change in the ion current, which is essential for the detection technology of DNA sequencing and protein determination. In order to further illustrate the electrokinetic transport mechanism of particles passing through nanopores, a fully coupled continuum model is constructed by using the arbitrary Lagrangian–Eulerian (ALE) method. The model consists of the electric field described by the Poisson equation, the concentration field described by Nernst–Planck equation, and the flow field described by the Navier–Stokes equation. Based on this model, the influence of imposed electric field and particle length on the electrokinetic transport of cylindrical particles is investigated. It is found firstly the translation velocities for the longer particles remain constant when they locate inside the nanopore. Both the ion current blockade effect and the ion current enhancement effect occur when cylindrical particles enter and exit the nanopore, respectively, for the experimental parameters employed in this research. Moreover, the particle translation velocity and current fluctuation amplitude are dominated by the electric field intensity, which can be used to adjust the particle transmission efficiency and the ion current detectability. In addition, the increase in particle length changes the particle position corresponding to the peak value of the ion current, which contributes to distinguishing particles with different lengths as well.

Whole-genome sequencing and Mycobacterium tuberculosis: Challenges in sample preparation and sequencing data analysis

The numbers of patients with tuberculosis (TB) caused by resistant strains are still alarming. Therefore, it is necessary to determine resistance more quickly and precisely, than it is with the currently used phenotypic and genotypic methods. In recent years, technological advances have been made and the whole-genome sequencing (WGS) method has been introduced as a part of routine diagnostics in clinical laboratories. Comparing a wide range of mycobacterial genomic variations with a reference genome leads to a consistent evaluation of molecular-epidemiology and resistance of Mycobacterium tuberculosis (M. tuberculosis) to a wide range of anti-TB drugs. The quality of the obtained sequencing data is closely related to the type of sample and the method used for DNA extraction and sequencing library preparation. Moreover, the correct interpretation of results is also influenced by a bioinformatic data processing. A large number of bioinformatics pipelines are currently available, the sensitivity of which varies due to the different sizes of databases containing relevant mutations. This review focuses on the individual steps included in the sequencing workflow and factors that may affect the interpretation of final results.

Controlling DNA Translocation Through Solid-state Nanopores

Compared with the status of bio-nanopores, there are still several challenges that need to be overcome before solid-state nanopores can be applied in commercial DNA sequencing. Low spatial and low temporal resolution are the two major challenges. Owing to restrictions on nanopore length and the solid-state nanopores' surface properties, there is still room for improving the spatial resolution. Meanwhile, DNA translocation is too fast under an electrical force, which results in the acquisition of few valid data points. The temporal resolution of solid-state nanopores could thus be enhanced if the DNA translocation speed is well controlled. In this mini-review, we briefly summarize the methods of improving spatial resolution and concentrate on controllable methods to promote the resolution of nanopore detection. In addition, we provide a perspective on the development of DNA sequencing by nanopores.

Revealing the mechanism of DNA passing through graphene and boron nitride nanopores

Nanopores on 2D materials have great potential for DNA sequencing, which is attributed to their high sequencing speed and reduced cost. However, identifying DNA bases at such a high speed with nanometer precision has remained a big challenge. Here, we implemented theoretical calculations to show the translocation of single-stranded DNA (ssDNA) through solid-state nanopores on a 2D hexagonal boron nitride (h-BN) and graphene sheet. A base-specific ssDNA sequencing technique was devised, based on the individual differences in the ion current responses for the (polyA)₁₆, (polyG)₁₆, (polyC)₁₆, and (polyT)₁₆ bases of ssDNA. Our sequential procedure for sequencing is built on a comparative approach between the current signals obtained from the nanopores to achieve base-specific detection. Our results indicate that at higher voltages (1.0, 1.2, 1.4, 1.6, 1.8 and 2.0 V nm^-1), DNA translocation is tracked though the 1.5 and 2.0 nm nanopores, and at the 1.5 nm pore size, folded ssDNA close to the nanopore accounts for 93% and 81% of events for graphene and h-BN. Our calculations indicate charge transfer from the graphene to ssDNA, while the reverse happens in the case of the h-BN membrane. These results provide critical insights into our understanding of single molecule sequencing through solid-state nanopore research.

Nanopipettes: a potential tool for DNA detection

As the information in DNA is of practical value for clinical diagnosis, it is important to develop efficient and rapid methods for DNA detection. In the past decades, nanopores have been extensively explored for DNA detection due to their low cost and high efficiency. As a sub-group of the solid-state nanopore, nanopipettes exhibit great potential for DNA detection which is ascribed to their stability, ease of fabrication and good compatibility with other technologies, compared with biological and traditional solid-state nanopores. Herein, the review systematically summarizes the recent progress in DNA detection with nanopipettes and highlights those studies dedicated to improve the performance of DNA detection using nanopipettes through different approaches, including reducing the rate of DNA translocation, improving the spatial resolution of sensing nanopipettes, and controlling DNA molecules through novel techniques. Besides, some new perspectives of the integration of nanopipettes with other technologies are reviewed.

Surface coatings for solid-state nanopores

Since their introduction in 2001, solid-state nanopores have been increasingly exploited for the detection and characterization of biomolecules ranging from single DNA strands to protein complexes. A major factor that enables the application of nanopores to the analysis and characterization of a broad range of macromolecules is the preparation of coatings on the pore wall to either prevent non-specific adhesion of molecules or to facilitate specific interactions of molecules of interest within the pore. Surface coatings can therefore be useful to minimize clogging of nanopores or to increase the residence time of target analytes in the pore. This review article describes various coatings and their utility for changing pore diameters, increasing the stability of nanopores, reducing non-specific interactions, manipulating surface charges, enabling interactions with specific target molecules, and reducing the noise of current recordings through nanopores. We compare the coating methods with respect to the ease of preparing the coating, the stability of the coating and the requirement for specialized equipment to prepare the coating.

Controlled Focused Ion Beam Milling of Composite Solid State Nanopore Arrays for Molecule Sensing

Various nanoscale fabrication techniques are elaborated to form artificial nanoporous/nanochannel membranes to be applied for biosensing: one of the most prevalent is the micro-electromechanical systems (MEMS) compatible focused ion beam (FIB) milling. This technique can be easily adopted in micro- and nanomachining process sequences to develop composite multi-pore structures, although its precision and reproducibility are key points in the case of these thick multi-layered membranes. This work is to demonstrate a comprehensive characterisation of FIB milling to improve the reliability of the fabrication of solid state nanopore arrays with precisely predetermined pore geometries for a targeted molecule type to be recognised. The statistical geometric features of the fabricated nanopores were recorded as the function of the process parameters, and the resulting geometries were analysed in detail by high resolution scanning electron microscope (SEM), transmission electron microscope (TEM) and ion scanning microscopy. Continuous function of the pore diameter evolution rate was derived from the experimental results in the case of different material structures, and compared to former dissentient estimations. The additional metal layer was deposited onto the backside of the membrane and grounded during the ion milling to prevent the electrical charging of dielectric layers. The study proved that the conformity of the pore geometry and the reliability of their fabrication could be improved significantly. The applicability of the developed nanopore arrays for molecule detection was also considered by characterising the pore diameter dependent sensitivity of the membrane impedance modulation based measurement method.

Metagenomic approaches: effective tools for monitoring the structure and functionality of microbiomes in anaerobic digestion systems

Microbial metagenome analysis has proven its usefulness to investigate the microbiomes present in technical engineered ecosystems such as anaerobic digestion systems. The analysis of the total microbial genomic DNA allows the detailed determination of both the microbial community structure and its functionality. In addition, it enables to study the response of the microbiome to alterations in technical process parameters. Strategies of functional microbial networks to face abiotic stressors, e.g., resistance, resilience, and reorganization, can be evaluated with respect to overall process optimization. The objective of this paper is to review the main metagenomic tools used for effective studies on anaerobic digestion systems in monitoring the dynamic of the microbiomes, as well as the factors that have been identified so far as limiting the metagenomic studies in this ecosystems.

Mechanical properties of honeycomb nanoporous silicon: a high strength and ductile structure

There are remarkable studies geared towards developing mechanical analysis of nanoporous structures, while the size effect has been a major concern so far to improve strength or deformability. In this study, molecular dynamics simulations are utilized to study the pore shape effect on the mechanical behaviour of nanoporous silicon with circular, elliptical, square and hexagonal pore shapes. The influence of pore configuration on load transfer capabilities is studied for nanoporous silicon. A distinguished set of mechanical properties is observed on silicon with a hexagonal pore shape-resembling a honeycomb structure-with a high tensile strength and toughness. The study exhibits an improvement in the ductility through unique stress transformation in the hexagonal pore shape. In addition to the relative density, the potential to control the mechanical properties is demonstrated through the hexagon angle. Finally, a scaling law is developed for the mechanical behaviour of honeycomb nanoporous silicon. In addition to their outstanding mechanical properties, the work provides further insight into the capability of nanoporous structures in sensing applications due to their high surface-to-volume ratios.

Polarization Induced Electro-Functionalization of Pore Walls: A Contactless Technology

This review summarizes recent advances in micro- and nanopore technologies with a focus on the functionalization of pores using a promising method named contactless electro-functionalization (CLEF). CLEF enables the localized grafting of electroactive entities onto the inner wall of a micro- or nano-sized pore in a solid-state silicon/silicon oxide membrane. A voltage or electrical current applied across the pore induces the surface functionalization by electroactive entities exclusively on the inside pore wall, which is a significant improvement over existing methods. CLEF's mechanism is based on the polarization of a sandwich-like silicon/silicon oxide membrane, creating electronic pathways between the core silicon and the electrolyte. Correlation between numerical simulations and experiments have validated this hypothesis. CLEF-induced micro- and nanopores functionalized with antibodies or oligonucleotides were successfully used for the detection and identification of cells and are promising sensitive biosensors. This technology could soon be successfully applied to planar configurations of pores, such as restrictions in microfluidic channels.

Single-Molecule Analysis with Solid-State Nanopores

Solid-state nanopores and nanopipettes are an exciting class of single-molecule sensors that has grown enormously over the last two decades. They offer a platform for testing fundamental concepts of stochasticity and transport at the nanoscale, for studying single-molecule biophysics and, increasingly, also for new analytical applications and in biomedical sensing. This review covers some fundamental aspects underpinning sensor operation and transport and, at the same time, it aims to put these into context as an analytical technique. It highlights new and recent developments and discusses some of the challenges lying ahead.

DNA Translocation through Hybrid Bilayer Nanopores

Pore functionalization has been explored by several groups as a strategy to control DNA translocation through solid-state nanopores. Here we present a hybrid nanopore system consisting of single-layer graphene and a DNA origami layer to achieve base-selective control of DNA translocation rate through aligned nanopores of the two layers. This is achieved by incorporating unpaired dangling bases called overhangs to the origami near the pore region. Molecular dynamics simulations were used to optimize the design of the origami nanopore and the overhangs. Specifically, we considered the influence of the number and spatial distribution of overhangs on translocation times. The simulations revealed that specific interactions between the overhangs and the translocating single-stranded DNA resulted in base-specific residence times.

Fabrication and Applications of Solid-State Nanopores

Nanopores fabricated from synthetic materials (solid-state nanopores), platforms for characterizing biological molecules, have been widely studied among researchers. Compared with biological nanopores, solid-state nanopores are mechanically robust and durable with a tunable pore size and geometry. Solid-state nanopores with sizes as small as 1.3 nm have been fabricated in various films using engraving techniques, such as focused ion beam (FIB) and focused electron beam (FEB) drilling methods. With the demand of massively parallel sensing, many scalable fabrication strategies have been proposed. In this review, typical fabrication technologies for solid-state nanopores reported to date are summarized, with the advantages and limitations of each technology discussed in detail. Advanced shrinking strategies to prepare nanopores with desired shapes and sizes down to sub-1 nm are concluded. Finally, applications of solid-state nanopores in DNA sequencing, single molecule detection, ion-selective transport, and nanopatterning are outlined.

Trapped and non-trapped polymer translocations through a spherical pore

The polymer translocation through a spherical pore is studied using the Langevin dynamics simulation. The translocation events are classified into two types: one is the trapped translocation in which the entire polymer is trapped in the pore and the other is the non-trapped translocation where the pore cannot hold the whole polymer. We find that the trapped translocation is favored at large spheres and small external voltages. However, the monomer-pore attraction would lead to the non-monotonic behavior of the trapped translocation possibility out of all translocation events. Moreover, both the trapped and non-trapped translocation times are dependent on the polymer length, pore size, external voltage, and the monomer-pore attraction. There exist two pathways for the polymer in the trapped translocation: an actively trapped pathway for the polymer trapped in the pore before the head monomer arrives at the pore exit, and a passively trapped pathway for the polymer trapped in the pore while the head monomer is struggling to move out of the pore. The studies of trapped pathways can provide a deep understanding of the polymer translocation behavior.

Translocation of DNA and protein through a sequentially polymerized polyurea nanopore

Here, we investigated the translocation of biomolecules, such as DNA and protein, through a sequentially polymerized polyurea nanopore, with a thin (<10 nm) polymer membrane of uniform thickness. The polyurea membrane was synthesized by molecular layer deposition using p-phenylenediisocyanate (PDI) and p-phenylenediamine (PDA) as sequential precursors. The membrane exhibited a hydrophobic surface with a highly negative surface charge density (-51 mC m-2 at pH 8). It was particularly noted that the high surface charge density of the membrane resulted in a highly developed electro-osmotic flow which, in turn, strongly influenced the capture probability of biomolecules, depending on the balance between the electro-osmotic and electrophoretic forces. For instance, the capture frequency of negatively charged DNA was demonstrated to be quite low, since these two forces more or less cancelled each other, whereas that of positively charged MDM2 was much higher, since these two forces were additive. We also identified that the mean translocation time of MDM2 through the polyurea nanopore was 26.1 ± 3.7 μs while that of the SiN nanopore was 14.2 ± 2.0 μs, hence suggesting that the enhanced electrostatic interaction between positively charged MDM2 and the negatively charged pore surface affects the translocation speed.

Scalable fabrication of sub-10 nm polymer nanopores for DNA analysis

We present the first fabrication of sub-10 nm nanopores in freestanding polymer membranes via a simple, cost-effective, high-throughput but deterministic fabrication method. Nanopores in the range of 10 nm were initially produced via a single-step nanoimprinting process, which was further reduced to sub-10 nm pores via a post-NIL polymer reflow process. The low shrinkage rate of 2.7 nm/min obtained under the conditions used for the reflow process was the key to achieving sub-10 nm pores with a controllable pore size. The fabricated SU-8 nanopore membranes were successfully employed for transient current measurements during the translocation of DNA molecules through the nanopores.

Electric Single-Molecule Hybridization Detector for Short DNA Fragments

By combining DNA nanotechnology and high-bandwidth single-molecule detection in nanopipets, we demonstrate an electric, label-free hybridization sensor for short DNA sequences (<100 nucleotides). Such short fragments are known to occur as circulating cell-free DNA in various bodily fluids, such as blood plasma and saliva, and have been identified as disease markers for cancer and infectious diseases. To this end, we use as a model system an 88-mer target from the RV1910c gene in Mycobacterium tuberculosis, which is associated with antibiotic (isoniazid) resistance in TB. Upon binding to short probes attached to long carrier DNA, we show that resistive-pulse sensing in nanopipets is capable of identifying rather subtle structural differences, such as the hybridization state of the probes, in a statistically robust manner. With significant potential toward multiplexing and high-throughput analysis, our study points toward a new, single-molecule DNA-assay technology that is fast, easy to use, and compatible with point-of-care environments.

Recent Progress in Solid-State Nanopores

The solid-state nanopore has attracted much attention as a next-generation DNA sequencing tool or a single-molecule biosensor platform with its high sensitivity of biomolecule detection. The platform has advantages of processability, robustness of the device, and flexibility in the nanopore dimensions as compared with the protein nanopore, but with the limitation of insufficient spatial and temporal resolution to be utilized in DNA sequencing. Here, the fundamental principles of the solid-state nanopore are summarized to illustrate the novelty of the device, and improvements in the performance of the platform in terms of device fabrication are explained. The efforts to reduce the electrical noise of solid-state nanopore devices, and thus to enhance the sensitivity of detection, are presented along with detailed descriptions of the noise properties of the solid-state nanopore. Applications of 2D materials including graphene, h-BN, and MoS₂ as a nanopore membrane to enhance the spatial resolution of nanopore detection, and organic coatings on the nanopore membranes for the addition of chemical functionality to the nanopore are summarized. Finally, the recently reported applications of the solid-state nanopore are categorized and described according to the target biomolecules: DNA-bound proteins, modified DNA structures, proteins, and protein oligomers.

Chemically Modified Hydrogel-Filled Nanopores: A Tunable Platform for Single-Molecule Sensing

Label-free, single-molecule sensing is anideal candidate for biomedical applications that rely on the detection of low copy numbers in small volumes and potentially complex biofluids. Among them, solid-state nanopores can be engineered to detect single molecules of charged analytes when they are electrically driven through the nanometer-sized aperture. When successfully applied to nucleic acid sensing, fast transport in the range of 10-100 nucleotides per nanosecond often precludes the use of standard nanopores for the detection of the smallest fragments. Herein, hydrogel-filled nanopores (HFN) are reported that combine quartz nanopipettes with biocompatible chemical poly(vinyl) alcohol hydrogels engineered in-house. Hydrogels were modified physically or chemically to finely tune, in a predictable manner, the transport of specific molecules. Controlling the hydrogel mesh size and chemical composition allowed us to slow DNA transport by 4 orders of magnitude and to detect fragments as small as 100 base pairs (bp) with nanopores larger than 20 nm at an ionic strength comparable to physiological conditions. Considering the emergence of cell-free nucleic acids as blood biomarkers for cancer diagnostics or prenatal testing, the successful sensing and size profiling of DNA fragments ranging from 100 bp to >1 kbp long under physiological conditions demonstrates the potential of HFNs as a new generation of powerful and easily tunable molecular diagnostics tools.

Zero-Depth Interfacial Nanopore Capillaries

High-fidelity analysis of translocating biomolecules through nanopores demands shortening the nanocapillary length to a minimal value. Existing nanopores and capillaries, however, inherit a finite length from the parent membranes. Here, nanocapillaries of zero depth are formed by dissolving two superimposed and crossing metallic nanorods, molded in polymeric slabs. In an electrolyte, the interface shared by the crossing fluidic channels is mathematically of zero thickness and defines the narrowest constriction in the stream of ions through the nanopore device. This novel architecture provides the possibility to design nanopore fluidic channels, particularly with a robust 3D architecture maintaining the ultimate zero thickness geometry independently of the thickness of the fluidic channels. With orders of magnitude reduced biomolecule translocation speed, and lowered electronic and ionic noise compared to nanopores in 2D materials, the findings establish interfacial nanopores as a scalable platform for realizing nanofluidic systems, capable of single-molecule detection.

Highly reliable and low-noise solid-state nanopores with an atomic layer deposited ZnO membrane on a quartz substrate

We present a fabrication scheme for a solid-state ZnO nanopore membrane directly deposited on top of a quartz substrate by atomic layer deposition (ALD) and investigate the characteristics of DNA translocation through the nanopores. We chose a ZnO membrane owing to its high isoelectric point (∼9.5) as well as its chemical and mechanical stability. Aside from the extremely low noise level exhibited by this device on a highly insulating and low dielectric quartz substrate, it also slows down the translocation speed of DNA by more than one order of magnitude as compared to that of a SiN_x nanopore device. We propose that the electrostatic interaction between the positively charged ZnO nanopore wall, resulting from the high isoelectric point of ZnO, and the negatively charged phosphate backbone of DNA provides an additional frictional force that slows down the DNA translocation.