Carbon nanotubes in the biological interphase: the relevance of noncovalence

Diesel-derived PM2.5 induces impairment of cardiac movement followed by mitochondria dysfunction in cardiomyocytes

Particulate matter (PM) in polluted air can be exposed to the human body through inhalation, ingestion, and skin contact, accumulating in various organs throughout the body. Organ accumulation of PM is a growing health concern, particularly in the cardiovascular system. PM emissions are formed in the air by solid particles, liquid droplets, and fuel - particularly diesel - combustion. PM_2.5 (size < 2.5 μm particle) is a major risk factor for approximately 200,000 premature deaths annually caused by air pollution. This study assessed the deleterious effects of diesel-derived PM_2.5 exposure in HL-1 mouse cardiomyocyte cell lines. The PM_2.5-induced biological changes, including ultrastructure, intracellular reactive oxygen species (ROS) generation, viability, and intracellular ATP levels, were analyzed. Moreover, we analyzed changes in transcriptomics using RNA sequencing and metabolomics using gas chromatography-tandem mass spectrometry (GC-MS/MS) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) in PM_2.5-treated HL-1 cells. Ultrastructural analysis using transmission electron microscopy revealed disruption of mitochondrial cristae structures in a PM_2.5 dose-dependent manner. The elevation of ROS levels and reduction in cell viability and ATP levels were similarly observed in a PM_2.5 dose-dependently. In addition, 6,005 genes were differentially expressed (fold change cut-off ± 4) from a total of 45,777 identified genes, and 20 amino acids (AAs) were differentially expressed (fold change cut-off ± 1.2) from a total of 28 identified AAs profiles. Using bioinformatic analysis with ingenuity pathway analysis (IPA) software, we found that the changes in the transcriptome and metabolome are highly related to changes in biological functions, including homeostasis of Ca²⁺, depolarization of mitochondria, the function of mitochondria, synthesis of ATP, and cardiomyopathy. Moreover, an integrated single omics network was constructed by combining the transcriptome and the metabolome. In silico prediction analysis with IPA predicted that upregulation of mitochondria depolarization, ROS generation, cardiomyopathy, suppression of Ca²⁺ homeostasis, mitochondrial function, and ATP synthesis occurred in PM_2.5-treated HL-1 cells. In particular, the cardiac movement of HL-1 was significantly reduced after PM_2.5 treatment. In conclusion, our results assessed the harmful effects of PM_2.5 on mitochondrial function and analyzed the biological changes related to cardiac movement, which is potentially associated with cardiovascular diseases.

Carbon Nanotubes: An Emerging Drug Delivery Carrier in Cancer Therapeutics

BACKGROUND

The scope of nanotechnology has been extended to almost every sphere of our daily life. As a result of this, nanocarriers like Carbon Nanotubes (CNTs) are gaining considerable attention for their use in various therapeutic and diagnostic applications.

OBJECTIVE

The objective of the current article is to review various important features of CNTs that make them as efficient carriers for anticancer drug delivery in cancer therapeutics.

METHODS

In this review article, different works of literature are reported on various prospective applications of CNTs in the targeting of multiple kinds of cancerous cells of different organs via; the loading of various anticancer agents.

RESULTS

Actually, CNTs are the 3rd allotropic type of the carbon-fullerenes that are a part of the cylindrical tubular architecture. CNTs possess some excellent physicochemical characteristics and unique structural features that provide an effective platform to deliver anticancer drugs to target specific sites for achieving a high level of therapeutic effectiveness even in cancer therapeutics. For better results, CNTs are functionalized and modified with different classes of therapeutically bioactive molecules via; the formation of stable covalent bonding or by the use of supramolecular assemblies based on the noncovalent interaction(s). In recent years, the applications of CNTs for the delivery of various kinds of anticancer drugs and targeting of tumor sites have been reported by various research groups.

CONCLUSION

CNTs represent an emerging nanocarrier material for the delivery and targeting of numerous anticancer drugs in cancer therapeutics.

Influence of Single-Stranded DNA Coatings on the Interaction between Graphene Nanoflakes and Lipid Bilayers

Using molecular dynamics simulations, it is demonstrated that a partial coating of single-stranded DNA (ssDNA) reduces the penetration depth of a graphene nanoflake (GNF) into a phospholipid bilayer by attenuating the hydrophobic force that drives the penetration. As the GNF penetrates the bilayer, the ssDNA remains adsorbed to the GNF outside of the bilayer where it shields the graphene from the surrounding water. The penetration depth is found to be controlled by the amount of ssDNA coating the GNF, with a sparser coating resulting in a deeper penetration since the ssDNA shields less of the GNF surface. As the coating density is increased, the likelihood of the GNF entering the bilayer is reduced where it instead tends to lie flat on the bilayer surface with the sugar phosphate backbone of ssDNA interacting with the hydrophilic lipid head groups. While no bilayer disruption is observed for a partially inserted ssDNA-coated GNF, a larger, bare, partially inserted GNF is found to preferentially extract phospholipids from the bilayer, offering further evidence of lipid extraction as a main cytotoxicity mechanism of GNFs. Therefore, a coating of ssDNA may reduce the cytotoxicity of GNFs by shielding the unfavorable graphene-water interaction, thus preventing graphene penetration and lipid extraction.

Surface modulation of single-walled carbon nanotubes for selective bacterial cell agglutination

BACKGROUND

Bacterial resistance to antibiotics is one of the biggest challenges facing medicine today. Anti-adhesive therapy, using inhibitors of bacterial adhesion to epithelial cells, one of the first stages of infection, is a promising approximation in this area. The size, shape, number of sugar and their placement are variables that have to be taken into account in order to develop multivalent systems able to inhibit the bacterial adhesion based on sugar-lectin interaction.

MATERIALS AND METHODS

In the present work we report a modular approach for the synthesis of water-soluble 1D-carbon nanotube-sugar nanoconstructs, with the necessary flexibility to allow an efficient sugar-lectin interaction. The method is based on the reaction of aryl diazonium salts generated in situ from aniline-substituted mannose and lactose derivatives with single wall carbon nanotubes (SWCNTs) sidewalls.

RESULTS

Two hybrid nanosystems, I-II, exposing mannose or lactose and having a tetraethylene glycol spacer between the sugar and the nanotube sidewall were rapidly assembled and adequately characterized. The sweet nano-objects were then tested for their ability to agglutinate and selectively inhibit the growth of uropathogenic Escherichia coli. These studies have shown that nanosystem I, exposing mannose on the nanotube surface is able to agglutinate and to inhibit the bacterial growth unlike nano-objects II exposing lactose.

CONCLUSION

The results reported constitute a proof of principle in using mannose-coated 1D-carbon nanotubes as antiadhesive drugs that compete for FimH binding and prevent the uropathogenic bacteria from adhering to the urothelial surface.

Photo-Responsive Graphene and Carbon Nanotubes to Control and Tackle Biological Systems

Photo-responsive multifunctional nanomaterials are receiving considerable attention for biological applications because of their unique properties. The functionalization of the surface of carbon nanotubes (CNTs) and graphene, among other carbon based nanomaterials, with molecular switches that exhibit reversible transformations between two or more isomers in response to different kind of external stimuli, such as electromagnetic radiation, temperature and pH, has allowed the control of the optical and electrical properties of the nanomaterial. Light-controlled molecular switches, such as azobenzene and spiropyran, have attracted a lot of attention for nanomaterial's functionalization because of the remote modulation of their physicochemical properties using light stimulus. The enhanced properties of the hybrid materials obtained from the coupling of carbon based nanomaterials with light-responsive switches has enabled the fabrication of smart devices for various biological applications, including drug delivery, bioimaging and nanobiosensors. In this review, we highlight the properties of photo-responsive carbon nanomaterials obtained by the conjugation of CNTs and graphene with azobenzenes and spiropyrans molecules to investigate biological systems, devising possible future directions in the field.

Light-Emitting Transition Metal Dichalcogenide Monolayers under Cellular Digestion

2D materials cover a wide spectrum of electronic properties. Their applications are extended from electronic, optical, and chemical to biological. In terms of biomedical uses of 2D materials, the interactions between living cells and 2D materials are of paramount importance. However, biointerfacial studies are still in their infancy. This work studies how living organisms interact with transition metal dichalcogenide monolayers. For the first time, cellular digestion of tungsten disulfide (WS₂ ) monolayers is observed. After digestion, cells intake WS₂ and become fluorescent. In addition, these light-emitting cells are not only viable, but also able to pass fluorescent signals to their progeny cells after cell division. By combining synthesis of 2D materials and a cell culturing technique, a procedure for monitoring the interactions between WS₂ monolayers and cells is developed. These observations open up new avenues for developing novel cellular labeling and imaging approaches, thus triggering further studies on interactions between 2D materials and living organisms.

The assessment of metabolite alteration induced by -OH functionalized multi-walled carbon nanotubes in mice using NMR-based metabonomics

Introduction: There is a fundamental need to characterize multiwalled carbon nanotubes (MWCNTs) toxicity to guarantee their safe application. Functionalized MWCNTs have recently attracted special interest in order to enhance biocompatibility. The aim of the current work was to study the underlying toxicity mechanism of the -OH-functionalized MWCNTs (MWCNTs-OH), using the powerful NMR-based metabonomics technique. Methods: Following intraperitoneal single-injection of mice with 3 doses of MWCNTs-OH and one control, samples were collected at four time points during 22-days for NMR, biochemistry, and histopathology analysis. Metabolome profiling and pathway analysis were implemented by chemometrics tools and metabolome databases. Results: Based on the 1H-NMR data, metabolic perturbation induced by MWCNTs-OH were characterized by altered levels of steroid hormones, including elevated androgens, estrogens, corticosterone, and aldosterone. Moreover, increased L-lysine, aminoadipate, taurine and taurocholic acid and decreased biotin were observed in the high-dose group (1 mg.kg-1 B.W.) compared to the control. The findings also indicated that steroid hormone biosynthesis, lysine biosynthesis, and biotin metabolism are the most affected pathways by MWCNTs-OH. Conclusion: These pathways can reflect perturbation of energy, amino acids, and fat metabolism, as well as oxidative stress. The data obtained by biochemistry, metabonomics, and histopathology were in good agreement, proving that MWCNTs-OH was excreted within 24 h, through the biliary pathway.

Exfoliated graphene nanosheets: pH-sensitive drug carrier and anti-cancer activity

A straightforward and facile method for the exfoliation of graphene sheets using poly(vinylpyrrolidone) nanoparticles of an average size of 42nm was developed and their dual role as pH-sensitive drug carrier and anti-cancer agent was evaluated. The cytotoxic impact of the exfoliated nanosheets (GRP-PVP-NP) was examined on various cells (HCT-116, HeLa, SCC-9, NIH-3T3 and HEK-293cells) by a series of assays. Their cytotoxic nature was attributed to affecting the mitochondrial enzyme activity, proliferation capability, and the formation of tight junctions in cancer cells. The endocytosis was found to be internalization mechanism for the cellular uptake of nanosheets. The generation of reactive oxygen species and elicitation of caspase-3 activity which was undoubtedly associated with triggering of oxidative stress speculated to be the dominant cause of the cytotoxic pattern of nanosheets against cancer cells. Additionally, the results also showed the role of the nanosheets as a pH-sensitive drug carrier through drug loading by supramolecular interaction. The efficient release of doxorubicin was seen at low pH and in an environment with a low oxygen concentration, thus under conditions mimicking the typical tumor microenvironment. Therefore, these findings provide the first evidence for a dual function of exfoliated graphene sheets and also elucidate the cytotoxic mechanism responsible for the cancer cell death.

Pyrene-tagged carbohydrate-based mixed P/S ligand: spacer effect on the Rh(i)-catalyzed hydrogenation of methyl α-acetamidocinnamate

The chain length between the pyrene group and the rhodium atom in mixed P/S catalysts is crucial in the enantioselective hydrogenation of enamides, and the most active catalyst can be used in catch and release process.

A dioxaborine cyanine dye as a photoluminescence probe for sensing carbon nanotubes

The unique properties of carbon nanotubes have made them the material of choice for many current and future industrial applications. As a consequence of the increasing development of nanotechnology, carbon nanotubes show potential threat to health and environment. Therefore, development of efficient method for detection of carbon nanotubes is required. In this work, we have studied the interaction of indopentamethinedioxaborine dye (DOB-719) and single-walled carbon nanotubes (SWNTs) using absorption and photoluminescence (PL) spectroscopy. In the mixture of the dye and the SWNTs we have revealed new optical features in the spectral range of the intrinsic excitation of the dye due to resonance energy transfer from DOB-719 to SWNTs. Specifically, we have observed an emergence of new PL peaks at the excitation wavelength of 735 nm and a redshift of the intrinsic PL peaks of SWNT emission (up to 40 nm) in the near-infrared range. The possible mechanism of the interaction between DOB-719 and SWNTs has been proposed. Thus, it can be concluded that DOB-719 dye has promising applications for designing efficient and tailorable optical probes for the detection of SWNTs.

Designing multimodal carbon nanotubes by covalent multi-functionalization

Carbon nanotubes (CNTs) are a unique tool in nanotechnology owing to their exceptional properties that offer a variety of opportunities for applications in different fields. Nevertheless, their low dispersibility in organic solvents and in aqueous media hampers their development. The functionalization of their surface allows overcoming this issue, while exploiting and tuning their properties. Thanks to their high specific surface area, multi-functionalization strategies give the possibility to conjugate several copies of different molecules to endow the nanotubes with multiple functionalities. In this context, this review wishes to focus on the preparation of multimodal CNTs designed by covalent multi-functionalization. More specifically, we describe the different approaches that have been developed to prepare multi-functionalized CNTs through double and triple covalent functionalization of the nanotube framework. We also emphasize the strategies used to control the derivatization of multi-functionalized CNTs with molecules of interest mainly via sequential or simultaneous methodologies.

A sensing mechanism for the detection of carbon nanotubes using selective photoluminescent probes based on ionic complexes with organic dyes

The multifunctional properties of carbon nanotubes (CNTs) make them a powerful platform for unprecedented innovations in a variety of practical applications. As a result of the surging growth of nanotechnology, nanotubes present a potential problem as an environmental pollutant, and as such, an efficient method for their rapid detection must be established. Here, we propose a novel type of ionic sensor complex for detecting CNTs - an organic dye that responds sensitively and selectively to CNTs with a photoluminescent signal. The complexes are formed through Coulomb attractions between dye molecules with uncompensated charges and CNTs covered with an ionic surfactant in water. We demonstrate that the photoluminescent excitation of the dye can be transferred to the nanotubes, resulting in selective and strong amplification (up to a factor of 6) of the light emission from the excitonic levels of CNTs in the near-infrared spectral range, as experimentally observed via excitation-emission photoluminescence (PL) mapping. The chirality of the nanotubes and the type of ionic surfactant used to disperse the nanotubes both strongly affect the amplification; thus, the complexation provides sensing selectivity towards specific CNTs. Additionally, neither similar uncharged dyes nor CNTs covered with neutral surfactant form such complexes. As model organic molecules, we use a family of polymethine dyes with an easily tailorable molecular structure and, consequently, tunable absorbance and PL characteristics. This provides us with a versatile tool for the controllable photonic and electronic engineering of an efficient probe for CNT detection.

Optical sensitivity of mussel protein-coated double-walled carbon nanotubes on the iron–DOPA conjugation bond

The optical properties of semiconducting carbon nanotubes respond sensitively to external conditions.

Synthesis of 1D-glyconanomaterials by a hybrid noncovalent-covalent functionalization of single wall carbon nanotubes: a study of their selective interactions with lectins and with live cells

To take full advantage of the remarkable applications of carbon nanotubes in different fields, there is a need to develop effective methods to improve their water dispersion and biocompatibility while maintaining their physical properties. In this sense, current approaches suffer from serious drawbacks such as loss of electronic structure together with low surface coverage in the case of covalent functionalizations, or instability of the dynamic hybrids obtained by non-covalent functionalizations. In the present work, we examined the molecular basis of an original strategy that combines the advantages of both functionalizations without their main drawbacks. The hierarchical self-assembly of diacetylenic-based neoglycolipids into highly organized and compacted rings around the nanotubes, followed by photopolymerization leads to the formation of nanotubes covered with glyconanorings with a shish kebab-type topology exposing the carbohydrate ligands to the water phase in a multivalent fashion. The glyconanotubes obtained are fully functional, and able to establish specific interactions with their cognate receptors. In fact, by taking advantage of this selective binding, an easy method to sense lectins as a working model of toxin detection was developed based on a simple analysis of TEM images. Remarkably, different experimental settings to assess cell membrane integrity, cell growth kinetics and cell cycle demonstrated the cellular biocompatibility of the sugar-coated carbon nanotubes compared to pristine single-walled carbon nanotubes.

Non-covalent polymer wrapping of carbon nanotubes and the role of wrapped polymers as functional dispersants

Carbon nanotubes (CNTs) have been recognized as a promising material in a wide range of applications from biotechnology to energy-related devices. However, the poor solubility in aqueous and organic solvents hindered the applications of CNTs. As studies have progressed, the methodology for CNT dispersion was established. In this methodology, the key issue is to covalently or non-covalently functionalize the surfaces of the CNTs with a dispersant. Among the various types of dispersions, polymer wrapping through non-covalent interactions is attractive in terms of the stability and homogeneity of the functionalization. Recently, by taking advantage of their stability, the wrapped-polymers have been utilized to support and/or reinforce the unique functionality of the CNTs, leading to the development of high-performance devices. In this review, various polymer wrapping approaches, together with the applications of the polymer-wrapped CNTs, are summarized.

Non-covalent and reversible functionalization of carbon nanotubes

Carbon nanotubes (CNTs) have been proposed and actively explored as multipurpose innovative nanoscaffolds for applications in fields such as material science, drug delivery and diagnostic applications. Their versatile physicochemical features are nonetheless limited by their scarce solubilization in both aqueous and organic solvents. In order to overcome this drawback CNTs can be easily non-covalently functionalized with different dispersants. In the present review we focus on the peculiar hydrophobic character of pristine CNTs that prevent them to easily disperse in organic solvents. We report some interesting examples of CNTs dispersants with the aim to highlight the essential features a molecule should possess in order to act as a good carbon nanotube dispersant both in water and in organic solvents. The review pinpoints also a few examples of dispersant design. The last section is devoted to the exploitation of the major quality of non-covalent functionalization that is its reversibility and the possibility to obtain stimuli-responsive precipitation or dispersion of CNTs.

Carbon nanotubes: an emerging drug carrier for targeting cancer cells

During recent years carbon nanotubes (CNTs) have been attracted by many researchers as a drug delivery carrier. CNTs are the third allotropic form of carbon-fullerenes which were rolled into cylindrical tubes. To be integrated into the biological systems, CNTs can be chemically modified or functionalised with therapeutically active molecules by forming stable covalent bonds or supramolecular assemblies based on noncovalent interactions. Owing to their high carrying capacity, biocompatibility, and specificity to cells, various cancer cells have been explored with CNTs for evaluation of pharmacokinetic parameters, cell viability, cytotoxicty, and drug delivery in tumor cells. This review attempts to highlight all aspects of CNTs which render them as an effective anticancer drug carrier and imaging agent. Also the potential application of CNT in targeting metastatic cancer cells by entrapping biomolecules and anticancer drugs has been covered in this review.

Endowing carbon nanotubes with biological and biomedical properties by chemical modifications

The scope of nanotechnology is gaining importance in biology and medicine. Carbon nanotubes (CNTs) have emerged as a promising tool due to their unique properties, high specific surface area, and capacity to cross biological barriers. These properties offer a variety of opportunities for applications in nanomedicine, such as diagnosis, disease treatment, imaging, and tissue engineering. Nevertheless, pristine CNTs are insoluble in water and in most organic solvents; thereby functionalization of their surface is necessary to increase biocompatibility. Derivatization of CNTs also gives the possibility to conjugate different biological and bioactive molecules including drugs, proteins, and targeting ligands. This review focuses on the chemical modifications of CNTs that have been developed to impart specific properties for biological and medical purposes. Biomolecules can be covalently grafted or non-covalently adsorbed on the nanotube surface. In addition, the inner core of CNTs can be exploited to encapsulate drugs, nanoparticles, or radioactive elements.

Chameleon-like self-assembling peptides for adaptable biorecognition nanohybrids

We present here the development of adaptable hybrid materials in which self-assembling peptides can sense the diameter/curvature of carbon nanotubes and then adjust their overall structures from disordered states to α-helices, and vice versa. The peptides within the hybrid materials show exceptionally high thermal-induced conformational stability and molecular recognition capability for target RNA. This study shows that the context-dependent protein-folding effects can be realized in artificial nanosystems and provides a proof of principle that nanohybrid materials decorated with structured and adjustable peptide units can be fabricated using our strategy, from which smart and responsive organic/inorganic hybrid materials capable of sensing and controlling diverse biological molecular recognition events can be developed.

Boron nitride nanotubes: biocompatibility and potential spill-over in nanomedicine

Boron nitride nanotubes (BNNTs) represent an innovative and extremely intriguing class of nanomaterials. Thanks to their special chemical and physical characteristics, they have already found a large number of applications in the field of nanotechnology, and recent studies have shown their possible exploitation in the biomedical domain, both as nanocarriers and, more interestingly, as nanotransducers. In this review, the latest findings on the interactions between BNNTs and living systems are summarized, starting with the major issues of their stabilization in physiological media and their functionalization with bioactive molecules. Thereafter the biocompatibility data which have so far been made available are discussed, and the need for further extensive and standardized tests is highlighted. Finally, the appealing diagnostic and therapeutic opportunities offered by BNNT-based systems are described, envisioning the potential spill-over effects of such 'smart' and 'active' nanoparticles in nanomedicine.

Repair of abdominal wall defects in vitro and in vivo using VEGF sustained-release multi-walled carbon nanotubes (MWNT) composite scaffolds

Objective

Porcine acellular dermal matrices (ADM) have been widely used in experimental and clinical research for abdominal wall repair. Compared to porcine small intestinal submucosa (SIS), the effect of these matrices on the regenerative capacity of blood vessels is still not ideal. Multi-walled carbon nanotubes (MWNTs) can more effectively transport VEGF to cells or tissues because of their large specific surface area and interior cavity. In this study, we explored the safety and efficacy of implanted VEGF-loaded MWNT composite scaffolds in vitro and vivo to repair abdominal wall defects.

Materials and Methods

VEGF-loaded MWNTs were prepared by a modified plasma polymerization treatment. Four composite scaffolds were evaluated for cytotoxicity, proliferation, and release dynamics. We created 3 cm×4 cm abdominal wall defects in 43 Sprague-Dawley rats. After implantation times of 2, 4, 8, and 12 weeks, the scaffolds and the surrounding tissues were collected and examined by gross inspection, biomechanical testing, and histological examination.

Results

A 5–10 nm poly(lactic-co-glycolic acid) (PLGA) film was evenly distributed on MWNTs. The 3% MWNT composite group showed lower cytotoxicity and appropriate release performance, and it was thus tested in vivo. In rats with the 3% composite implanted, host cells were prevented from migrating to the ADM at 2 weeks, vascularization was established more rapidly at 12 weeks, and the values for both the maximum load and the elastic modulus were significantly lower than in the ADM-alone group (p<0.01). Histological staining revealed that the MWNT was still not completely eliminated 12 weeks after implantation.

Conclusion

MWNTs were able to carry VEGF to cells or tissues, and the 3% MWNT composite material showed lower cytotoxicity and had an appropriate release performance, which prompted faster vascularization of the ADM than other scaffolds. Nevertheless, the MWNTs induced harmful effects that should be carefully considered in biomedical studies.

Combination of small size and carboxyl functionalisation causes cytotoxicity of short carbon nanotubes

The use of carbon nanotubes (CNTs) could improve medical diagnosis and treatment provided they show no adverse effects in the organism. In this study, short CNTs with different diameters with and without carboxyl surface functionalisation were assessed. After physicochemical characterisation, cytotoxicity in phagocytic and non-phagocytic cells was determined. The role of oxidative stress was evaluated according to the intracellular glutathione levels and protection by N-acetyl cysteine (NAC). In addition to this, the mode of cell death was also investigated. CNTs <8 nm acted more cytotoxic than CNTs ≥20 nm and carboxylated CNTs more than pristine CNTs. Protection by NAC was maximal for large diameter pristine CNTs and minimal for small diameter carboxylated CNTs. Thin (<8 nm) CNTs acted mainly by disruption of membrane integrity and CNTs with larger diameter induced mainly apoptotic changes. It is concluded that cytotoxicity of small carboxylated CNTs occurs by necrosis and cannot be prevented by antioxidants.

Carbon nanotube interaction with extracellular matrix proteins producing scaffolds for tissue engineering

In recent years, significant progress has been made in organ transplantation, surgical reconstruction, and the use of artificial prostheses to treat the loss or failure of an organ or bone tissue. In recent years, considerable attention has been given to carbon nanotubes and collagen composite materials and their applications in the field of tissue engineering due to their minimal foreign-body reactions, an intrinsic antibacterial nature, biocompatibility, biodegradability, and the ability to be molded into various geometries and forms such as porous structures, suitable for cell ingrowth, proliferation, and differentiation. Recently, grafted collagen and some other natural and synthetic polymers with carbon nanotubes have been incorporated to increase the mechanical strength of these composites. Carbon nanotube composites are thus emerging as potential materials for artificial bone and bone regeneration in tissue engineering.

Nanodiamond promotes surfactant-mediated triglyceride removal from a hydrophobic surface at or below room temperature

We demonstrate that ca. 5 nm nanodiamond particles dramatically improve triglyceride lipid removal from a hydrophobic surface at room temperature using either anionic or nonionic surfactants. We prepare nanodiamond-surfactant colloids, measure their stability by dynamic light scattering and use quartz crystal microbalance-dissipation, a technique sensitive to surface mass, in order to compare their ability to remove surface-bound model triglyceride lipid with ionic and nonionic aqueous surfactants at 15-25 °C. Oxidized, reduced, ω-alkylcarboxylic acid, and ω-alkylamidoamine surface-modified adducts are prepared, and then characterized by techniques including (13)C cross-polarization (CP) magic-angle spinning (MAS) NMR. Clear improvement in removal of triglyceride was observed in the presence of nanodiamond, even at 15 °C, both with nanodiamond-surfactant colloids, and by prior nanoparticle deposition on interfacial lipid, showing that nanodiamonds are playing a crucial role in the enhancement of the detergency process, providing unique leads in the development of new approaches to low-temperature cleaning.

Carbon nanotubes in the liquid phase: addressing the issue of dispersion

The inherent size and hollow geometry with extraordinary electronic and optical properties make carbon nanotubes (CNTs) promising building blocks for molecular or nanoscale devices. Unfortunately, their hydrophobic nature and their existence in the form of agglomerated and parallel bundles make this interesting material inadequately soluble or dispersible in most of the common solvents, which is crucial to their processing. Therefore, various ingenious techniques have been reported to disperse the CNTs in various solvents with different experimental conditions. However, by analyzing the published scientific research articles, it is evident that there is an important issue or misunderstanding between the term "dispersion" and "solubilization". As a result many researchers use the terms interchangeably, particularly when stating the interaction of CNTs with liquids, which causes confusion among the readers, students, and researchers. In this article, this fundamental issue is addressed in order to give basic insight to the researchers who are working with CNTs, as well as to the scientists who deal with nano-related research domains.

A cell-compatible conductive film from a carbon nanotube network adsorbed on poly-L-lysine

Single-walled carbon nanotubes (SWNTs) have shown promise for use in organic electronic applications including thin film transistors, conducting electrodes, and biosensors. Additionally, previous studies found applications for SWNTs in bioelectronic devices, including drug delivery carriers and scaffolds for tissue engineering. There is a current need to rapidly process SWNTs from solution phase to substrates in order to produce device structures that are also biocompatible. Studies have shown the use of surfaces covalently functionalized with primary amines to selectively adsorb semiconducting SWNTs. Here we report the potential of substrates modified with physisorbed polymers as a rapid biomaterials-based approach for the formation of SWNT networks. We hypothesized that rapid surface modification could be accomplished by adsorption of poly-L-lysine (PLL), which is also frequently used in biological applications. We detail a rapid and facile method for depositing SWNTs onto various substrate materials using the amine-rich PLL. Dispersions of SWNTs of different chiralities suspended in N-methylpyrrolidinone (NMP) were spin coated onto various PLL-treated substrates. SWNT adsorption and alignment were characterized by atomic force microscopy (AFM) while electrical properties of the network were characterized by 2-terminal resistance measurements. Additionally, we investigated the relative chirality of the SWNT networks by micro-Raman spectroscopy. The SWNT surface density was strongly dependent upon the adsorbed concentration of PLL on the surface. SWNT adsorbed on PLL-treated substrates exhibited enhanced biocompatibility compared to SWNT networks fabricated using alternative methods such as drop casting. These results suggest that PLL films can promote formation of biocompatible SWNT networks for potential biomedical applications.

Optically and biologically active mussel protein-coated double-walled carbon nanotubes

A method of dispersing strongly bundled double-walled carbon nanotubes (DWNTs) via a homogeneous coating of mussel protein in an aqueous solution is presented. Optical activity, mechanical strength, as well as electrical conductivity coming from the nanotubes and the versatile biological activity from the mussel protein make mussel-coated DWNTs promising as a multifunctional scaffold and for anti-fouling materials.

Enhanced cell uptake via non-covalent decollation of a single-walled carbon nanotube-DNA hybrid with polyethylene glycol-grafted poly(l-lysine) labeled with an Alexa-dye and its efficient uptake in a cancer cell

The use of single-walled carbon nanotubes (SWNTs) for biomedical applications is a promising approach due to their unique outer optical stimuli response properties, such as a photothermal response triggered by near-IR laser irradiation. The challenging task in order to realize such applications is to render the SWNTs biocompatible. For this purpose, the stable and homogeneous functionalization of the SWNTs with a molecule carrying a biocompatible group is very important. Here, we describe the design and synthesis of a polyanionic SWNT/DNA hybrid combined with a cationic poly(l-lysine) grafted by polyethylene glycol (PLL-g-PEG) to provide a supramolecular SWNT assembly. A titration experiment revealed that the assembly undergoes an approximately 1 : 1 reaction of the SWNT/DNA with PLL-g-PEG. We also found that SWNT/DNA is coated with PLL-g-PEG very homogeneously that avoids the non-specific binding of proteins on the SWNT surface. The experiment using the obtained supramolecular hybrid was carried out in vitro and a dramatic enhancement in the cell uptake efficiency compared to that of the SWNT/DNA hybrid without PLL-g-PEG was found.

Polyampholyte-Wrapped Carbon Nanotubes: Preparation and Internalization by Embryonic Fibroblast Cells

The cytotoxicity and cellular uptake of carbon nanotubes (CNTs) has recently attracted considerable interest because of the issue of biosphere-nanomaterial interactions. The biocompatibility of CNTs is determined by the metal impurities in the CNTs, the size of the CNTs and the CNT dispersion states; in particular, the type of surface modifications on the CNTs affects how they interact with cells and determines their cytotoxicity and cellular uptake. In this study, biocompatible single-walled carbon nanotubes (SWNTs) wrapped with a water-soluble copolymer, poly[2-(dimethylamino)ethyl methacrylate-co-methacrylic acid] (PDM), were prepared. We report that these SWNTs have enhanced water dispersibility and cellular internalization but no significant cytotoxic activity against mouse embryonic fibroblast NIH-3T3 cells.

In vivo osseointegration of nano-designed composite coatings on titanium implants

This is the first in vivo study of plasma-sprayed carbon nanotube (CNT)-reinforced hydroxyapatite (HA) coating on titanium implants embedded in rodents' bone. No adverse effect or cytotoxicity of CNT addition on bone tissues and cells was observed. Normal bone growth was observed around HA-CNT-coated implants. CNT addition induces higher osseointegration as compared to HA. Elastic modulus of new bone was compared with the modulus of HA-CNT/bone interface to understand the mechanical integrity of the implant.