Hybrid 2D nanomaterials as dual-mode contrast agents in cellular imaging

Phase-Modulated Elastic Properties of 2D Magnetic FeTe: Hexagonal and Tetragonal Polymorphs

2D layered magnets, such as iron chalcogenides, have emerged these years as a new family of unconventional superconductors and provided the key insights to understand the phonon-electron interaction and pairing mechanism. Their mechanical properties are of strategic importance for the potential applications in spintronics and optoelectronics. However, there is still a lack of efficient approach to tune the elastic modulus despite the extensive studies. Herein, the modulated elastic modulus of 2D magnetic FeTe and its thickness-dependence is reported via phase engineering. The grown 2D FeTe by chemical vapor deposition can present various polymorphs, that is tetragonal FeTe (t-FeTe, antiferromagnetic) and hexagonal FeTe (h-FeTe, ferromagnetic). The measured Young's modulus of t-FeTe by nanoindentation method shows an obvious thickness-dependence, from 290.9 ± 9.2 to 113.0 ± 8.7 GPa when the thicknesses increased from 13.2 to 42.5 nm, respectively. In comparison, the elastic modulus of h-FeTe remains unchanged. These results can shed light on the efficient modulation of mechanical properties of 2D magnetic materials and pave the avenues for their practical applications in nanodevices.

Quantum magnetic phenomena in engineered heterointerface of low-dimensional van der Waals and non-van der Waals materials

Investigating magnetic phenomena at the microscopic level has emerged as an indispensable research domain in the field of low-dimensional magnetic materials. Understanding quantum phenomena that mediate the magnetic interactions in dimensionally confined materials is crucial from the perspective of designing cheaper, compact, and energy-efficient next-generation spintronic devices. The infrequent occurrence of intrinsic long-range magnetic order in dimensionally confined materials hinders the advancement of this domain. Hence, introducing and controlling the ferromagnetic character in two-dimensional materials is important for further prospective studies. The interface in a heterostructure significantly contributes to modulating its collective magnetic properties. Quantum phenomena occurring at the interface of engineered heterostructures can enhance or suppress magnetization of the system and introduce magnetic character to a native non-magnetic system. Considering most 2D magnetic materials are used as stacks with other materials in nanoscale devices, the methods to control the magnetism in a heterostructure and understanding the corresponding mechanism are crucial for promising spintronic and other functional applications. This review highlights the effect of electric polarization of the adjacent layer, changed structural configuration at the vicinity of the interface, natural strain induced by lattice mismatch, and exchange interaction in the interfacial region in modulating the magnetism of heterostructures of van der Waals and non-van der Waals materials. Further, prospects of interface-engineered magnetism in spin-dependent device applications are also discussed.

Magneto-Luminescent Nanocomposites Based on Carbon Dots and Ferrite with Potential for Bioapplication

Multifunctional nanocomposites that combine both magnetic and photoluminescent (PL) properties provide significant advantages for nanomedical applications. In this work, a one-stage synthesis of magneto-luminescent nanocomposites (MLNC) with subsequent stabilization is proposed. Microwave synthesis of magnetic carbon dots (M-CDs) was carried out using precursors of carbon dots and magnetic nanoparticles. The effect of stabilization on the morphological and optical properties of nanocomposites has been evaluated. Both types of nanocomposites demonstrate magnetic and PL properties simultaneously. The resulting MLNCs demonstrated excellent solubility in water, tunable PL with a quantum yield of up to 28%, high photostability, and good cytocompatibility. Meanwhile, confocal fluorescence imaging showed that M-CDs were localized in the cell nuclei. Consequently, the multifunctional nanocomposites M-CDs are promising candidates for bioimaging and therapy.

Fluorescence Microscopy-An Outline of Hardware, Biological Handling, and Fluorophore Considerations

Fluorescence microscopy has become a critical tool for researchers to understand biological processes at the cellular level. Micrographs from fixed and live-cell imaging procedures feature in a plethora of scientific articles for the field of cell biology, but the complexities of fluorescence microscopy as an imaging tool can sometimes be overlooked or misunderstood. This review seeks to cover the three fundamental considerations when designing fluorescence microscopy experiments: (1) hardware availability; (2) amenability of biological models to fluorescence microscopy; and (3) suitability of imaging agents for intended applications. This review will help equip the reader to make judicious decisions when designing fluorescence microscopy experiments that deliver high-resolution and informative images for cell biology.

Emerging 2D Nanomaterials for Biomedical Applications

Two-dimensional (2D) nanomaterials are an emerging class of biomaterials with remarkable potential for biomedical applications. The planar topography of these nanomaterials confers unique physical, chemical, electronic and optical properties, making them attractive candidates for therapeutic delivery, biosensing, bioimaging, regenerative medicine, and additive manufacturing strategies. The high surface-to-volume ratio of 2D nanomaterials promotes enhanced interactions with biomolecules and cells. A range of 2D nanomaterials, including transition metal dichalcogenides (TMDs), layered double hydroxides (LDHs), layered silicates (nanoclays), 2D metal carbides and nitrides (MXenes), metal-organic framework (MOFs), covalent organic frameworks (COFs) and polymer nanosheets have been investigated for their potential in biomedical applications. Here, we will critically evaluate recent advances of 2D nanomaterial strategies in biomedical engineering and discuss emerging approaches and current limitations associated with these nanomaterials. Due to their unique physical, chemical, and biological properties, this new class of nanomaterials has the potential to become a platform technology in regenerative medicine and other biomedical applications.

Emerging two-dimensional monoelemental materials (Xenes): Fabrication, modification, and applications thereof in the field of bioimaging as nanocarriers

In recent years, more and more research enthusiasm has been devoted to the development of emerging two-dimensional (2D) monoelement materials (Xenes) and explored potential applications in various fields, especially biomedicine and bioimaging. The inspiring results attribute to their excellent physicochemical properties, including adjustable band gap, surface electronic layout characteristics, and so on, making it easier for surface modification in order to meet designated needs. As a popular interdisciplinary research frontier, a variety of methods for fabricating 2D Xenes have recently been adopted for pre-preparing future practical bioimaging applications, which implies that these materials will have broad clinical application prospects in the future. In this review, we will concentrate on the family of 2D Xenes and summarize their fabrication and modification methods firstly. Then, their applications in bioimaging as nanocarriers will be described according to the Periodic Table of Elements. In addition, current challenges and prospects for further clinical applications will be under discussion and use black phosphorus as a typical example. At last, general conclusion will be made that it is worth expecting that 2D Xenes will play a key role in the next generation of oncologic bioimaging in the future. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials Toxicology and Regulatory Issues in Nanomedicine > Regulatory and Policy Issues in Nanomedicine.

A fluorometric assay for α-glucosidase activity based on quaternary AgInZnS QDs

A sensitive fluorescence strategy was constructed for the detection of α-glucosidase activity based on AgInZnS QDs. The AIZS QDs which were synthesized by hydrothermal method have a fluorescence emission wavelength of 554 nm. Ce⁴⁺ was able to oxidize p-phenylenediamine (PPD) to generate oxPPD, which can quench the fluorescence of AIZS QDs through dynamic quenching. When α-glucosidase was introduced into the system, L-ascorbic acid-2-O-α-D-glucopyranosyl (AAG) could be hydrolyzed to form ascorbic acid (AA), which can reduce Ce⁴⁺ and prevent the oxidation of PPD. Thus, the dynamic quenching process was blocked accompanying with the fluorescence recovery of AIZS QDs. The developed detection system for α-glucosidase displayed a good linear relationship between 0.01 and 0.16 U·mL^-1 with a detection limit of 0.0073 U·mL^-1. The sensing platform with high feasibility and anti-interference is a competitive alternative applied to α-glucosidase-related diagnostics.

Carbon Nanotori Structures for Thermal Transport Applications on Lubricants

Carbon nanostructures have been recently applied to improve industrial manufacturing processes and other materials; such is the case for lubricants used in the metal-mechanic industry. Nanotori are toroidal carbon nanostructures, obtained from chemical treatment of multi-wall carbon nanotubes (MWCNTs). This material has been shown to have superb anti-wear and friction reduction performance, having the ability to homogeneously disperse within water in concentrations between 1–2 wt.%. Obtained results of these novel nanostructures under water mixtures and novel additives were a set point to our studies in different industrial lubricants. In the present work, nanotori structures have been applied in various filler fractions as reinforcement to evaluate the behavior in thermal transport of water-based (WB) and oil-based (OB) lubricants. Temperature-dependent experiments to evaluate the thermal conductivity were performed using a thermal water bath ranging from room temperature up to 323 K. The obtained results showed a highly effective and favorable improvement in the heat transport of both lubricants; oil-based results were better than water-based results, with nanotori structures increasing the lubricants’ thermal transport properties by 70%, compared to pure lubricant.

Manganese Oxide Nanomaterials: Synthesis, Properties, and Theranostic Applications

Despite the comprehensive applications in bioimaging, biosensing, drug/gene delivery, and tumor therapy of manganese oxide nanomaterials (MONs including MnO₂ , MnO, Mn₂ O₃ , Mn₃ O₄ , and MnO_x ) and their derivatives, a review article focusing on MON-based nanoplatforms has not been reported yet. Herein, the representative progresses of MONs on synthesis, heterogene, properties, surface modification, toxicity, imaging, biodetection, and therapy are mainly introduced. First, five kinds of primary synthetic methods of MONs are presented, including thermal decomposition method, exfoliation strategy, permanganates reduction method, adsorption-oxidation method, and hydro/solvothermal. Second, the preparations of hollow MONs and MON-based composite materials are summarized specially. Then, the chemical properties, surface modification, and toxicity of MONs are discussed. Next, the diagnostic applications including imaging and sensing are outlined. Finally, some representative rational designs of MONs in photodynamic therapy, photothermal therapy, chemodynamic therapy, sonodynamic therapy, radiotherapy, magnetic hyperthermia, chemotherapy, gene therapy, starvation therapy, ferroptosis, immunotherapy, and various combination therapy are highlighted.

Recent advances in graphene-based nanomaterials: properties, toxicity and applications in chemistry, biology and medicine

This review (with 239 refs.) summarizes the progress that has been made in applications of graphene-based nanomaterials (such as plain graphene, graphene oxides, doped graphene oxides, graphene quantums dots) in biosensing, imaging, drug delivery and diagnosis. Following an introduction into the field, a first large section covers the toxicity of graphene and its derivatives (with subsections on bacterial toxicity and tissue toxicity). The use of graphene-based nanomaterials in sensors is reviewed next, with subsections on electrochemical, FET-based, fluorescent, chemiluminescent and colorimetric sensors and probes. The large field of imaging is treated next, with subchapters on optical, PET-based, and magnetic resonance based methods. A concluding section summarizes the current status, addresses current challenges, and gives an outlook on potential future trends. Graphical Abstract Schematic presentation of the potential applications of graphene-based materials in life science and biomedicine, emphatically reflected in some vital areas such as DNA analysis, biological monitoring, drug delivery, in vitro labelling, in vivo imaging, tumor target, etc.

Thermo-Responsive Graphene Oxide/Poly(Ethyl Ethylene Phosphate) Nanocomposite via Ring Opening Polymerization

An efficient strategy for growing thermo-sensitive polymers from the surface of exfoliated graphene oxide (GO) is reported in this article. GO sheets with hydroxyls and epoxy groups on the surface were first prepared by modified Hummer's method. Epoxy groups on GO sheets can be easily modified through ring-opening reactions, involving nucleophilic attack by tris(hydroxymethyl) aminomethane (TRIS). The resulting GO-TRIS sheets became a more versatile precursor for next ring opening polymerization (ROP) of ethyl ethylene phosphate (EEP), leading to GO-TRIS/poly(ethyl ethylene phosphate) (GO-TRIS-PEEP) nanocomposite. The nanocomposite was characterized by ¹H NMR, Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), differential thermal gravity (DTG), transmission electron microscopy (TEM) and atomic force microscopy (AFM). Since hydrophilic PEEP chains make the composite separate into single layers through hydrogen bonding interaction, the dispersity of the functionalized GO sheets in water is significantly improved. Meanwhile, the aqueous dispersion of GO-TRIS-PEEP nanocomposite shows reversible temperature switching self-assembly and disassembly behavior. Such a smart graphene oxide-based hybrid material is promising for applications in the biomedical field.

Multifunctional Carbon-Based Nanomaterials: Applications in Biomolecular Imaging and Therapy

Molecular imaging has been widely used not only as an important detection technology in the field of medical imaging for cancer diagnosis but also as a theranostic approach for cancer in recent years. Multifunctional carbon-based nanomaterials (MCBNs), characterized by unparalleled optical, electronic, and thermal properties, have attracted increasing interest and demonstrably hold the greatest promise in biomolecular imaging and therapy. As such, it should come as no surprise that MCBNs have already revealed a great deal of potential applications in biomedical areas, such as bioimaging, drug delivery, and tumor therapy. Carbon nanomaterials can be categorized as graphene, single-walled carbon nanotubes, mesoporous carbon, nanodiamonds, fullerenes, or carbon dots on the basis of their morphologies. In this article, reports of the use of MCBNs in various chemical conjugation/functionalization strategies, focusing on their applications in cancer molecular imaging and imaging-guided therapy, will be comprehensively summarized. MCBNs show the possibility to serve as optimal candidates for precise cancer biotheranostics.

FMSP-Nanoparticles Induced Cell Death on Human Breast Adenocarcinoma Cell Line (MCF-7 Cells): Morphometric Analysis

Currently, breast cancer treatment mostly revolves around radiation therapy and surgical interventions, but often these treatments do not provide satisfactory relief to the patients and cause unmanageable side-effects. Nanomaterials show promising results in treating cancer cells and have many advantages such as high biocompatibility, bioavailability and effective therapeutic capabilities. Interestingly, fluorescent magnetic nanoparticles have been used in many biological and diagnostic applications, but there is no report of use of fluorescent magnetic submicronic polymer nanoparticles (FMSP-nanoparticles) in the treatment of human breast cancer cells. In the present study, we tested the effect of FMSP-nanoparticles on human breast cancer cells (MCF-7). We tested different concentrations (1.25, 12.5 and 50 µg/mL) of FMSP-nanoparticles in MCF-7 cells and evaluated the nanoparticles response morphometrically. Our results revealed that FMSP-nanoparticles produced a concentration dependent effect on the cancer cells, a dose of 1.25 µg/mL produced no significant effect on the cancer cell morphology and cell death, whereas dosages of 12.5 and 50 µg/mL resulted in significant nuclear augmentation, disintegration, chromatic condensation followed by dose dependent cell death. Our results demonstrate that FMSP-nanoparticles induce cell death in MCF-7 cells and may be a potential anti-cancer agent for breast cancer treatment.

Gauging the Nanotoxicity of h2D-C2N toward Single-Stranded DNA: An in Silico Molecular Simulation Approach

Recent toxicological assessments of graphene, graphene oxides, and some other two-dimensional (2D) materials have shown them to be substantially toxic at the nanoscale, where they inhibit and eventually disrupt biological processes. These shortfalls of graphene and analogs have resulted in a quest for novel biocompatible 2D materials with minimum cytotoxicity. In this article, we demonstrate C₂N (h2D-C₂N), a newly synthesized 2D porous graphene analog, to be non-nanotoxic toward genetic materials from an "in-silico" point of view through sequence-dependent binding of different polynucleotide single-stranded DNA (ssDNA) onto it. The calculated binding energy of nucleobases and the free energy of binding of polynucleotides follow the common trait, cytosine > guanine > adenine > thymine, and are well within the limits of physisorption. Ab-initio simulations completely exclude the possibility of any chemical reaction, demonstrating purely noncovalent binding of nucleobases with C₂N through a crucial interplay between hydrogen bonding and π-stacking interactions with the surface. Further, we show that the extent of distortion inflicted upon ssDNA by C₂N is negligible. Analysis of the density of states of the nucleobase-C₂N hybrids confirms minimum electronic perturbation of the bases after adsorption. Most importantly, we demonstrate the potency of C₂N in nucleic acid transportation via reversible binding of ssDNA. The plausible use of C₂N as a template for DNA repair is illustrated through an example of C₂N-assisted complementary ssDNA winding.

Preparation of a temperature-responsive block copolymer-anchored graphene oxide@ZnS NPs luminescent nanocomposite for selective detection of 2,4,6-trinitrotoluene

Thermo-sensitive block copolymer decorated GO@ZnS NPs nanocomposite was constructed via π–π stacking interaction as a robust fluorescent sensing platform for the selective detection of TNT.

Bifunctional Luminomagnetic Rare-Earth Nanorods for High-Contrast Bioimaging Nanoprobes

Nanoparticles exhibiting both magnetic and luminescent properties are need of the hour for many biological applications. A single compound exhibiting this combination of properties is uncommon. Herein, we report a strategy to synthesize a bifunctional luminomagnetic Gd2-xEuxO3 (x = 0.05 to 0.5) nanorod, with a diameter of ~20 nm and length in ~0.6 μm, using hydrothermal method. Gd2O3:Eu(3+) nanorods have been characterized by studying its structural, optical and magnetic properties. The advantage offered by photoluminescent imaging with Gd2O3:Eu(3+) nanorods is that this ultrafine nanorod material exhibits hypersensitive intense red emission (610 nm) with good brightness (quantum yield more than 90%), which is an essential parameter for high-contrast bioimaging, especially for overcoming auto fluorescent background. The utility of luminomagnetic nanorods for biological applications in high-contrast cell imaging capability and cell toxicity to image two human breast cancer cell lines T47D and MDA-MB-231 are also evaluated. Additionally, to understand the significance of shape of the nanostructure, the photoluminescence and paramagnetic characteristic of Gd2O3:Eu(3+) nanorods were compared with the spherical nanoparticles of Gd2O3:Eu(3+).

Carbon nanomaterials: multi-functional agents for biomedical fluorescence and Raman imaging

Carbon based nanomaterials have emerged over the last few years as important agents for biomedical fluorescence and Raman imaging applications. These spectroscopic techniques utilize either fluorescently labelled carbon nanomaterials or the intrinsic photophysical properties of the carbon nanomaterial. In this review article we present the utilization and performance of several classes of carbon nanomaterials, namely carbon nanotubes, carbon nanohorns, carbon nanoonions, nanodiamonds and different graphene derivatives, which are currently employed for in vitro as well as in vivo imaging in biology and medicine. A variety of different approaches, imaging agents and techniques are examined and the specific properties of the various carbon based imaging agents are discussed. Some theranostic carbon nanomaterials, which combine diagnostic features (i.e. imaging) with cell specific targeting and therapeutic approaches (i.e. drug delivery or photothermal therapy), are also included in this overview.

Marriage Strategy of Structure and Composition Designs for Intensifying Ultrasound & MR & CT Trimodal Contrast Imaging

Despite great efforts having been devoted to the design of multimodal imaging probe, almost all design principles of nanotheranostic agents subordinate to simple assemblies of building blocks, resulting in complex preparation process and discounted ability, that is, 1 + 1 < 2. In this report, a novel design strategy, marriage of structure design and composition design that can maximize imaging ability of each building block, ultimately achieving 1 + 1 ≥ 2, has been established. Moreover, a high-efficient ultrasound (US) & MR & CT trimodal contrast agent acts as model to instantiate this design strategy, wherein nanoparticles-induced nonlinear scattering and rattle-type structure-induced double scattering enhancing US imaging, and uniform distribution of Mn(2+) paramagentic centers and "core-satellite" structure of Au atoms favoring enhanced MR imaging and CT imaging, respectively have been validated, achieving optimization of structure design. Importantly, the selected components, silica, Au and MnO are endowed with excellent biocompatibility, displaying the marriage strategy of composition design with aforementioned structure optimization. In in vivo evaluations, such a biocompatible trimodal probe is demonstrated of excellent performance in intensifying CT, MR and US imaging in vivo, especially after positively charged modification by PEI promoting more probes retained in tumor. More importantly, as a universal design strategy, the involved principles in constructing such a US&MR&CT trimodal imaging probe promise great potentials in guiding designs of other materials-based multimodal imaging probe.

Inorganic nanomaterials for bioimaging, targeted drug delivery and therapeutics

Inorganic nanomaterials including gold nanoparticles, mesoporous silica nanoparticles, graphene, magnetic nanoparticles, quantum dots and layered double hydroxides have become one of the most active research fields in biochemistry, biotechnology and biomedicine. Benefiting from the facile synthesis/modification, intrinsically physicochemical properties and good biocompatibility, inorganic nanomaterials have shown great potential in bioimaging, targeted drug delivery and cancer therapies. This Feature Article summarizes recent progress on various inorganic nanocarriers, including the background, synthesis, modification, cytotoxicity, physicochemical properties as well as their applications in biomedicine.

Graphene-based nanomaterials as molecular imaging agents

Molecular imaging (MI) is a noninvasive, real-time visualization of biochemical events at the cellular and molecular level within tissues, living cells, and/or intact objects that can be advantageously applied in the areas of diagnostics, therapeutics, drug discovery, and development in understanding the nanoscale reactions including enzymatic conversions and protein-protein interactions. Consequently, over the years, great advancement has been made in the development of a variety of MI agents such as peptides, aptamers, antibodies, and various nanomaterials (NMs) including single-walled carbon nanotubes. Recently, graphene, a material popularized by Geim & Novoselov, has ignited considerable research efforts to rationally design and execute a wide range of graphene-based NMs making them an attractive platform for developing highly sensitive MI agents. Owing to their exceptional physicochemical and biological properties combined with desirable surface engineering, graphene-based NMs offer stable and tunable visible emission, small hydrodynamic size, low toxicity, and high biocompatibility and thus have been explored for in vitro and in vivo imaging applications as a promising alternative of traditional imaging agents. This review begins by describing the intrinsic properties of graphene and the key MI modalities. After which, we provide an overview on the recent advances in the design and development as well as physicochemical properties of the different classes of graphene-based NMs (graphene-dye conjugates, graphene-antibody conjugates, graphene-nanoparticle composites, and graphene quantum dots) being used as MI agents for potential applications including theranostics. Finally, the major challenges and future directions in the field will be discussed.

Nanostructured magnetic nanocomposites as MRI contrast agents

Magnetic resonance imaging (MRI) has become an integral part of modern clinical imaging due to its non-invasiveness and versatility in providing tissue and organ images with high spatial resolution. With the current MRI advancement, MRI imaging probes with suitable biocompatibility, good colloidal stability, enhanced relaxometric properties and advanced functionalities are highly demanded. As such, MRI contrast agents (CAs) have been an extensive research and development area. In the recent years, different inorganic-based nanoprobes comprising inorganic magnetic nanoparticles (MNPs) with an organic functional coating have been engineered to obtain a suitable contrast enhancement effect. For biomedical applications, the organic functional coating is critical to improve colloidal stability and biocompatibility. Simultaneously, it also provides a building block for generating a higher dimensional secondary structure. In this review, the combinatorial design approach by a self-assembling pre-formed hydrophobic inorganic MNPs core (from non-polar thermolysis synthesis) into various functional organic coatings (e.g. ligands, amphiphilic polymers and graphene oxide) to form water soluble nanocomposites will be discussed. The resultant magnetic ensembles were classified based on their dimensionality, namely, 0-D, 1-D, 2-D and 3-D structures. This classification provides further insight into their subsequent potential use as MRI CAs. Special attention will be dedicated towards the correlation between the spatial distribution and the associated MRI applications, which include (i) coating optimization-induced MR relaxivity enhancement, (ii) aggregation-induced MR relaxivity enhancement, (iii) off-resonance saturation imaging (ORS), (iv) magnetically-induced off-resonance imaging (ORI), (v) dual-modalities MR imaging and (vi) multifunctional nanoprobes.

Synthesis of antibacterial and magnetic nanocomposites by decorating graphene oxide surface with metal nanoparticles

Simple method for preparation of Ag NPs and GO + IO + Ag nanocomposites using cinnamon extract developed. The nanocomposites developed are magnetic and as effective as Ag NPs against bacteria and are cheaper due to less amount of Ag.

Two-dimensional graphene analogues for biomedical applications

In this critical review, we summarize the state-of-the-art progress of two-dimensional graphene analogues with a particular focus on biomedical applications.

Progress in the characterization of bio-functionalized nanoparticles using NMR methods and their applications as MRI contrast agents

Significant progress has been made over the last three decades in the field of NMR, a technique which has proven to have a variety of applications in many scientific disciplines, including nanotechnology. Herein we describe how NMR enables the characterization of nanosystems at different stages of their formation and modification (raw materials, bare or functionalized nanosystems), even making it possible to study in vivo nanoparticle interactions, thereby importantly contributing to nanoparticle design and subsequent optimization. Furthermore, the unique characteristics of nanosystems can open up new prospects for site-targeted, more specific contrast agents, contributing to the development of certain nuclear magnetic resonance applications such as MRI.

Efficient colorimetric pH sensor based on responsive polymer-quantum dot integrated graphene oxide

In this paper, we report the development of a versatile platform for a highly efficient and stable graphene oxide (GO)-based optical sensor that exhibits distinctive ratiometric color responses. To demonstrate the applicability of the platform, we fabricated a colorimetric, GO-based pH sensor that responds to a wide range of pH changes. Our sensing system is based on responsive polymer and quantum dot (QD) hybrids integrated on a single GO sheet (MQD-GO), with the GO providing an excellent signal-to-noise ratio and high dispersion stability in water. The photoluminescence emissions of the blue and orange color-emitting QDs (BQDs and OQDs) in MQD-GO can be controlled independently by different pH-responsive linkers of poly(acrylic acid) (PAA) (pKa=4.5) and poly(2-vinylpyridine) (P2VP) (pKa=3.0) that can tune the efficiencies of Förster resonance energy transfer from the BQDs to the GO and from the OQDs to the GO, respectively. As a result, the color of MQD-GO changes from orange to near-white to blue over a wide range of pH values. The detailed mechanism of the pH-dependent response of the MQD-GO sensor was elucidated by measurements of time-resolved fluorescence and dynamic light scattering. Furthermore, the MQD-GO sensor showed excellent reversibility and high dispersion stability in pure water, indicating that our system is an ideal platform for biological and environmental applications. Our colorimetric GO-based optical sensor can be expanded easily to various other multifunctional, GO-based sensors by using alternate stimuli-responsive polymers.

Magneto-controllable capture and release of cancer cells by using a micropillar device decorated with graphite oxide-coated magnetic nanoparticles

Aiming to highly efficient capture and analysis of circulating tumor cells, a micropillar device decorated with graphite oxide-coated magnetic nanoparticles is developed for magneto-controllable capture and release of cancer cells. Graphite oxide-coated, Fe3 O4 magnetic nanoparticles (MNPs) are synthesized by solution mixing and functionalized with a specific antibody, following by the immobilization of such modified MNPs on our designed micropillar device. For the proof-of-concept study, a HCT116 colorectal cancer cell line is employed to exam the capture efficiency. Under magnetic field manipulation, the high density packing of antibody-modified MNPs on the micropillars increases the local concentration of antibody, as well as the topographic interactions between cancer cells and micropillar surfaces. The flow rate and the micropillar geometry are optimized by studying their effects on capture efficiency. Then, a different number of HCT116 cells spiked in two kinds of cell suspension are investigated, yielding capture efficiency >70% in culture medium and >40% in blood sample, respectively. Moreover, the captured HCT116 cells are able to be released from the micropillars with a saturated efficiency of 92.9% upon the removal of applied magnetic field and it is found that 78% of the released cancer cells are viable, making them suitable for subsequent biological analysis.

Fluorinated graphene oxide; a new multimodal material for biological applications

Fluorinated graphene oxide (FGO) is reported for the first time as a magnetically responsive drug carrier that can serve both as a magnetic resonance imaging (MRI) and photoacoustic contrast agent, under preclinical settings, and as a type of photothermal therapy. Its hydrophilic nature facilitates biocompatibility. FGO as a broad wavelength absorber, with high charge transfer and strong non-linear scattering is optimal for NIR laser-induced hyperthermia.

Covalently interconnected three-dimensional graphene oxide solids

The creation of three-dimensionally engineered nanoporous architectures via covalently interconnected nanoscale building blocks remains one of the fundamental challenges in nanotechnology. Here we report the synthesis of ordered, stacked macroscopic three-dimensional (3D) solid scaffolds of graphene oxide (GO) fabricated via chemical cross-linking of two-dimensional GO building blocks. The resulting 3D GO network solids form highly porous interconnected structures, and the controlled reduction of these structures leads to formation of 3D conductive graphene scaffolds. These 3D architectures show promise for potential applications such as gas storage; CO2 gas adsorption measurements carried out under ambient conditions show high sorption capacity, demonstrating the possibility of creating new functional carbon solids starting with two-dimensional carbon layers.

Efficient temperature sensing platform based on fluorescent block copolymer-functionalized graphene oxide

Efficient temperature-sensing platform was demonstrated using temperature-responsive, fluorescent P7AC-b-PNIPAM-b-PSN3 block copolymer-anchored graphene oxide sheets (FGO). FGO exhibited extraordinary stability in water and showed fast optical on-off switching behavior in response to temperature change.

New horizons for diagnostics and therapeutic applications of graphene and graphene oxide

Graphene, a one-atom-thick two-dimensional (2D) layer of sp(2) -bonded carbon, has received worldwide attention owing to its extraordinary physical and chemical properties. Recently, great efforts have been devoted to explore potential applications of graphene and its oxide in life science, especially in disease-related diagnostics, near-Infrared (NIR) phototherapy and imaging. Here we will introduce recent advances and new horizons in this area, and focus on the rising progress on NIR photothermal therapy for cancer and Alzheimer's disease (AD), human telomerase detection, stem cell proliferation and differentiation on graphene substrate, diagnosis of cancer cell and related biomarkers, drug/nucleotide/peptide delivery and cell imaging, which have not been comprehensively reviewed. We hope to provide an outlook to the applications of graphene and its oxide, especially on the new horizons in this field, and inspire broader interests across various disciplines.