Polyelectrolyte-multilayer-supported Au@Ag core-shell nanoparticles with high catalytic activity

Simultaneous SERS-decoding detection of multiple pathogens in drinking water with home-made portable double-layer filtration and concentration device

The engineering of a home-made portable double-layer filtration and concentration device with the common syringe for rapid analysis of water samples is reported. The core elements of the device were two installed filtration membranes with different pore sizes for respective functions. The upper filtration membrane was used for preliminary intercepting large interfering impurities (interception membrane), while the lower filtration membrane was used for collecting multiple target pathogens (enrichment membrane) for determination. This combination can make the contaminated environmental water, exemplified by surface water, filtrated quickly through the device and just retained the target bacteria of Escherichia coli O157:H7, Staphylococcus aureus, and Listeria monocytogenes on the lower enrichment membrane. Integrating with surface-enhanced Raman spectra (SERS) platform to decode the SERS-Tags (SERS-TagCVa, SERS-TagR6G, and SERS-TagMB) already labeled on each of the enriched bacteria based the antibody-mediated immuno-recognition effect, fast separation, concentration, and detection of multiple pathogenic bacteria from the bulk of contaminated environmental water were realized. Results show that within 30 min, all target bacteria in the lake water can be simultaneously and accurately measured in the range from 101 to 106 CFU mL-1 with detection limit of 10.0 CFU mL-1 without any pre-culture procedures. This work highlights the simplicity, rapidness, cheapness, selectivity, and the robustness of the constructed method for simultaneous detecting multiple pathogens in aqueous samples. This protocol opens a new avenue for facilitating the development of versatile analytical tools for drinking water and food safety monitoring in underdeveloped or developing countries.

Evolution of "On-Barcode" Luminescence Oxygen Channeling Immunoassay by Exploring the Barcode Structure and the Assay System

The multiplexed luminescence oxygen channeling immunoassay (multi-LOCI) platform we developed recently that combines conventional LOCI and suspension array technology is capable of realizing facile "mix-and-measure" multiplexed assays without tedious washing steps. However, previous work lacks comprehensive studies of the structure-performance relationship of the host-guest-structured barcode, which may obstruct the evolution and further translation of this exciting new technology to practical applications. Accordingly, this work revealed that polyelectrolyte interlayers played a crucial role in tuning the packing density of guest acceptor beads (ABs). More interestingly, we noticed that "sparse" barcodes (barcodes with low ABs packing density) exhibited comparable assay performance with "compact" ones (barcodes with high ABs packing density). The high robustness of barcodes allows for multi-LOCI to be a more universal and flexible assay platform. Furthermore, through optimization of the assay system including the laser power, as well as the concentrations of donor beads and biotinylated detection antibodies, the multi-LOCI platform showed a significant improvement in sensitivity compared with our previous work, with the limit of detection decreasing to as low as ca. 1 pg/mL. Impressively, multi-LOCI that enabled simultaneous detection of multiple analytes exhibited comparable sensitivity with the classical single-plexed LOCI, due to the ingenious structural design of the multi-LOCI barcode and the unique "on-barcode" assay format.

Ultrafast Laser-Induced Atomic Structure Transformation of Au Nanoparticles with Improved Surface Activity

Metallic nanoparticles (NPs) play a significant role in nanocatalytic systems, which are important for clean energy conversion, storage, and utilization. Laser fabrication of metallic NPs relying on light-matter interactions provides many opportunities. It is essential to study the atomic structure transformation of nonactive monocrystalline metallic NPs for practical applications. The high-density stacking faults were fabricated in monocrystalline Au NPs through tuning the ultrafast laser-induced relaxation dynamics, and the thermal and dynamic stress effects on the atomic structure transformation were revealed. The atomic structure transformation mainly arises from the thermal effect, and the dynamic stress distribution induced by local energy deposition gives rise to the generation of stacking faults. Au NPs with abundant stacking faults show enhanced surface activity owing to their low coordination number. We suggest that this work expands the knowledge of laser-metallic nanomaterial interactions and provides a method for designing metallic NPs for a wide range of applications.

Self-assembled Janus plasmene nanosheets as flexible 2D photocatalysts

A leaf is a free-standing photocatalytic system that can effectively harvest solar energy and convert CO₂ and H₂O into carbohydrates in a continuous manner without the need for regeneration or tedious product extraction steps. Despite encouraging advances achieved in designing artificial photocatalysts, most of them function in bulk solution or on rigid surfaces. Here, we report on a 2D flexible photocatalytic system based on close packed Janus plasmene nanosheets. One side of the Janus nanosheets is hydrophilic with catalytically active palladium, while the opposite side is hydrophobic with plasmonic nanocrystals. Such a unique design ensures a stable nanostructure on a flexible polymer substrate, preventing dissolution/degradation of plasmonic photocatalysts during chemical conversion in aqueous solutions. Using catalytic reduction of 4-nitrophenol as a model reaction, we demonstrated efficient plasmon-enhanced photochemical conversion on our flexible Janus plasmene. The photocatalytic efficiency could be tuned by adjusting the palladium thickness or types of constituent building blocks or their orientations, indicating the potential for tailor-made catalyst design for desired reactions. Furthermore, the flexible Janus plasmene nanosheets were designed into a small 3D printed artificial tree, which could continuously convert 30 mL of chemicals in 45 minutes.

Pd Nanoparticle-Decorated 3D-Printed Hierarchically Porous TiO2 Scaffolds for the Efficient Reduction of a Highly Concentrated 4-Nitrophenol Solution

The large amount of 4-nitrophenol (4-NP) wastewater produced by the chemical industry has received increased concern over the growing risk of environmental pollution. The ability to catalyze the reduction of highly concentrated 4-NP wastewater is highly desirable for the practical treatment of industrial wastewater, yet it remains a significant challenge. Herein, we report Pd nanoparticle-decorated 3D-printed hierarchically porous TiO₂ scaffolds (Pd/TiO₂ scaffolds) for the efficient reduction of highly concentrated 4-NP wastewater (2 g·L^-1, ∼14.38 mM). The millimeter-sized interconnected channels in the scaffolds are conducive to rapid mass and ion transportation; meanwhile, the abundant micrometer- and nanometer-sized pores on the surface of the scaffolds offer adequate anchoring sites for Pd nanoparticles. The turnover frequency of the hierarchically porous Pd/TiO₂ scaffold (16 layers) is up to 2.69 min^-1, which is 1063 times higher than that of the Pd/TiO₂-bulk material with the same size (0.00253 min^-1). Importantly, no obvious deactivation of the catalytic activity is observed even after 20 cycles of catalytic reduction of 4-NP, showing excellent catalytic stability and reusability. Our strategy of loading the nanostructured catalyst on 3D-printable hierarchically porous structures put forward a flexible and versatile approach for boosting the catalytic performance of the catalysts, including catalytic activity, stability, and reusability, which can help promote their practical application in industry.

Synthesis of Ag-Au/Reduced Graphene Oxide/TiO2 Nanocomposites: Application as a Non-enzymatic Amperometric H2O2 Sensor

Background:

Owing to the strong oxidizing and reducing properties of hydrogen peroxide (H2O2), it has been widely used in many fields. In particular, H2O2 is widely used in the aseptic packaging of drinks and milk. The residue of H2O2 in food is harmful to human health. Therefore, the quantitative detection of H2O2 is of great practical significance.

Methods:

The Ag-Au/RGO/TiO2 nanocomposites were facilely synthesized by photo-reduction approach. Transmission electron microscopy, X-ray photoelectron spectroscopy and Raman spectroscopy were used to characterize the synthesized Ag-Au/RGO/TiO2 nanocomposites. Cyclic voltammetry was used to analyze the electrochemical behavior of H2O2 on the Ag-Au/RGO/TiO2/GCE. Amperometry was applied for quantitative determination of the concentration of H2O2.

Results:

A novel Ag-Au/RGO/TiO2/GCE was prepared. The Ag-Au/RGO/TiO2/GCE displayed high electrocatalytic activity towards H2O2 reduction. An electrochemical reduction peak of H2O2 was achieved on the Ag-Au/RGO/TiO2/GCE. The current responses were linear with the concentrations of H2O2 in the range of 0.01-30 mM with the detection limit of 3.0 μM (S/N = 3).

Conclusion:

An amperometric sensor has been prepared for H2O2 detection using Ag- Au/RGO/TiO2/GCE. The Ag-Au/RGO/TiO2/GCE shows good performance for the determination of H2O2. The proposed sensor exhibits good selectivity and stability.

Facile green synthesis of Ag-Cu decorated ZnO nanocomposite for effective removal of toxic organic compounds and an efficient detection of nitrite ions

A facile and eco-friendly green synthesis of silver-copper@zinc oxide (Ag-Cu@ZnO) nanocomposite using Acacia caesia flower extract and their application on catalytic reduction of toxic compounds and electrochemical sensing of nitrite ions are reported. The phytochemicals present in the extract were utilized for the Ag-Cu metal nanoparticles synthesis and also enhanced the binding capability between ZnO and Ag-Cu NPs. The synthesized nanocomposites were characterized by XRD, UV-Vis spectroscopy, Raman spectra, FTIR, SEM, TEM, EDX, XPS and ICP-AES for the formation of Ag-Cu NPs on ZnO. The Ag-Cu@ZnO nanocomposite showed better catalytic efficiency as compared to monometallic nanoparticles for 4-nitrophenol to 4-aminophenol conversion and Rhodamine B and Congo red dye degradation with 99% efficiency up to four cycles. The Ag-Cu@ZnO modified GC electrode showed enhanced catalytic activity towards nitrite oxidation, and it exhibited better performance compared to the other nanocomposites. An appreciable detection limit (17 μM) was achieved with excellent sensitivity for nitrite detection. The sensor was highly selective even in a many-fold higher concentration of co-existing interfering compounds. The good catalytic and electrochemical sensing is mainly ascribed due to the synergistic effect of Ag-Cu on the ZnO in the Ag-Cu@ZnO nanocomposite materials.

In-situ synthesis of metal nanoparticles@metal-organic frameworks: Highly effective catalytic performance and synergistic antimicrobial activity

M-NP@Zn-BIF (M-NP = Ag or Cu nanoparticle; Zn-BIF is a zinc-based boron imidazolate framework, Zn₂(BH(2-mim)₃)₂(obb); 2-mim = 2-methylimidazole; obb = 4,4'-oxybis(benzoate)) composites were successfully in-situ synthesized by utilizing the reducing ability of the BH bond contained in the Zn-BIF at room temperature without any additional chemical reduction reagents. These composites (225 μg/mL) exhibited excellent catalytic activity to convert 4-nitrophenol to 4-aminophenol in 2.5 min and 6 min with a conversion rate of 99.9 %, respectively. In addition, Ag@Zn-BIF (50 μg/mL) showed highly synergistic antibacterial activity against both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) with a bactericidal rate of approximately 99.9 %. An antibacterial mechanism was proposed for the generation of intracellular reactive oxygen species (ROS) levels. Superoxide radicals (O^2-) and hydroxyl radicals (OH) formed during the antibacterial process were shown to accelerate the death of bacteria. They also exhibited highly photocatalytic activity for Rhodamine B (RhB). When the concentration of the composites is 1000 μg/mL, the photocatalytic efficiency of Ag@Zn-BIF and Cu@Zn-BIF increased by 31.62 and 18.13 times compared with Zn-BIF, respectively. All in all, this study developed a simple and versatile integrated platform for the removal of nitrophenols, organic dyes, and the effective inactivation of bacteria in water.

Significantly Enhanced Thermoelectric Properties of Organic-Inorganic Hybrids with a Periodically Ordered Structure

The deficient order in amorphous components severely affects the thermoelectric (TE) properties in polymers. Encouragingly, two-dimensional layered double hydroxides (LDHs) have been regarded as an efficient host material to tune the conformation of guest molecules and construct ordered hybrids. Herein, we report a facile construction of periodically ordered organic-inorganic TE hybrids by alternative stacking of inorganic LDH nanosheets and organic poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS) molecules. The ordered structure of PEDOT:PSS-LDH gave rise to the extended molecular configuration of PEDOT:PSS, resulting in the improved carrier mobility in the hybrids. Moreover, the energy filtering was induced by such a periodically ordered structure, which blocked the low-energy carriers preferentially and improved the Seebeck coefficient in the hybrids. Therefore, the power factor of the PEDOT:PSS-LDH hybrid was 120-fold higher than that of pristine PEDOT:PSS. These results not only establish an effective method for the construction of periodically ordered TE materials but also address the significance of an ordered structure of molecules in TE materials.

Ultra-small iridium nanoparticles as active catalysts for the selective and efficient reduction of nitroarenes

The ultra-small noble metal iridium nanoparticles (IrNPs) possessing super catalytic activity can be applied in the efficient and selective catalytic reduction of nitroarenes under mild reaction conditions for the first time.

An electrochemical sensing platform amplified with a Au@Ag nanoparticle-decorated three-dimensional N-doped graphene aerogel for ultrasensitive determination of baicalein

A novel electrochemical method for highly sensitive determination of baicalein was developed with Au@Ag/3DNGA as signal amplifier.

Nanofabrication of Au nanoparticles over conductive metallohydrogel nanofibers for nanocatalysis application

A conductive and fluorescent metallohydrogel (1% w/v, CPH) has been synthesized and utilized for nanofabrication of AuNps and nanocatalysis applications.

Theoretical study of the structures of bimetallic Ag-Au and Cu-Au clusters up to 108 atoms

The stable structures of Ag-Au and Cu-Au clusters with 1 : 1, 1 : 3 and 3 : 1 compositions with up to 108 atoms are obtained using a modified adaptive immune optimization algorithm with Gupta potential. The dominant motifs of Ag-Au and Cu-Au clusters are decahedron and icosahedron, respectively. However, in Ag-rich Ag-Au clusters, more icosahedra are found, and in Cu-rich Cu-Au clusters, there exist several decahedral motifs. Four Leary tetrahedral motifs are predicted. Cu_coreAu_shell configurations are predicted in Cu-Au clusters. In Ag-Au clusters, most Ag atoms are on the surface, but partial ones are located in the inner shell, while Au atoms are interconnected in the middle shell.

Synergistic effect of Pd content and polyelectrolyte multilayer structure on nitrobenzene hydrogenation in a microreactor

In this study, we proposed a Pd–polyelectrolyte multilayer (PEM) hybrid film grafted on the polydopamine coated interior wall of a microreactor for nitrobenzene hydrogenation. Here, Pd nanoparticles were in situ synthesized in the PEMs consisting of poly(diallyldimethylammonium chloride) and poly(styrene sulfonate) via a two-stage ion-exchange and reduction process. The preparation process was monitored by UV-vis spectroscopy, which confirmed the formation of Pd in the PEM film. In addition, SEM and ICP-OES results indicated that the Pd content in the PEM film could be controlled by the number of the ion exchange and reduction cycles. Experimental results also showed that the prepared Pd–PEM hybrid film was active for the hydrogenation of nitrobenzene. The microreactor with the Pd–PEM hybrid film via multiple times had the increased catalyst loading, leading to a high yield of aniline and much better durability. In addition, it was also found that the NaCl concentration in the polyelectrolyte solution could affect the structure of the PEM film and therefore the Pd loading and catalytic performance.

In this study, we developed a Pd–PEMs hybrid film grafted on the polydopamine coated interior wall of a microreactor for nitrobenzene hydrogenation.

Gold substrates of controlled roughness and electrokinetic properties formed by nanoparticle deposition

The kinetics of positively charged gold nanoparticle self-assembly on oxidized silicon substrates (wafers) under diffusion-controlled transport was studied using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The latter technique allowed the roughness parameters of the monolayer (root mean square) to be determined as a function of the particle coverage. These results were adequately interpreted in terms of a theoretical model developed for surfaces covered by features of spherical shape considering the tip convolution effect. The stability and the electrokinetic characteristics (zeta potential) of the monolayers were also acquired using streaming potential measurements. It was shown that the inversion of the negative zeta potential of the bare substrate (overcharging) occurs at the particle coverage equal to 0.15, and for larger coverages positive zeta potential values were asymptotically attained. Additionally, the desorption kinetics of the particles was investigated by the streaming potential method, which confirmed the stability of the monolayers for a broad range of pHs. It was argued that these results enable to develop an efficient method for the preparation of gold sensors exhibiting a well-controlled surface roughness and electrostatic charge comprising both negative and positive values.

Carboxymethyl cellulose/polyacrylamide composite hydrogel for cascaded treatment/reuse of heavy metal ions in wastewater

A new bio-based bilateral hydrogel containing carboxymethyl cellulose (CMC) and polyacrylamide (PAM) was prepared for the wastewater remediation. The obtained CMC/PAM composite hydrogel reveals a strong single-ion affinity for copper (Cu^II), lead (Pb^II) and cadmium (Cd^II) ions, as well as multi-ion absorbability with its equilibrium data following the Langmuir adsorption model and its adsorption process abiding by a pseudo-second-order kinetics. To demonstrate its recycled use for the metal ions, the adsorbed Cu^II ions in the hydrogel were reduced in situ to form homogeneously dispersed Cu nanoparticles (NPs), leading to the Cu NPs-loaded CMC/PAM hydrogel. Reduction of 4-nitrophenol to 4-aminophenol with high efficiency was successfully achieved by this Cu NPs-loaded CMC/PAM hydrogel, verifying the hydrogel's dual functionalities towards the wastewater treatment and catalytic application.

Novel alginate/polyethyleneimine hydrogel adsorbent for cascaded removal and utilization of Cu2+ and Pb2+ ions

Heavy metal ion pollution leads to severe health risk to human beings. Herein, a natural and highly efficient sodium alginate (ALG)/polyethyleneimine (PEI) composite hydrogel was designed and fabricated for the removal of heavy metal ions from wastewater. The adsorption of heavy metal ions on the ALG based, 3D composite hydrogel were thoroughly investigated in this study. Furthermore, the in situ reduced metal nanoparticle-loaded ALG/PEI composite hydrogel provided us a sustainable utilization route of the heavy metal ion with a promising adsorption-catalysis ability. In general, this research will present an effective and practical paradigm for the cascaded treatment and recycling of heavy metal ions in wastewater.

Synthesis of silver particles stabilized by a bifunctional SiHx–NHy–PMHS oligomer as recyclable nanocatalysts for the catalytic reduction of 4-nitrophenol

Bifunctional oligomers with both reducing and stabilizing functionalities were prepared and successfully applied to the preparation of silver colloids of around 2 nm size without employing a strong stabilizer such as S and P, which was quite difficult to achieve. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) were performed to determine the morphology and particle size of the Ag colloids. UV-vis spectroscopy and X-ray absorption spectroscopy (XAS) were implemented to investigate the oxidation state of the Ag colloids. Synthesis parameters such as the density control of the ligating functionalities, the propinquity of the reducing and stabilizing groups, the extent of ligand stabilization and the reducing rates were found to have important effects on the formation and stabilization of Ag colloids. The as-synthesized Ag colloids were very stable even after being deposited on silica; then, they were subjected to calcination to get rid of the organics, which afforded Ag NPs (1.9–3.5 nm) on silica with narrow size distribution. These Ag NPs performed excellently in catalytic 4-nitrophenol reduction with conversion of up to 98% within 10 min. Furthermore, the Ag nanoparticles were quite stable and exhibited excellent reusability for seven successive reaction cycles without obvious decay. The straightforward synthesis of the ultra-small and stable Ag NPs has the potential for applications in the synthesis of other supported late transition metals.

A novel strategy using bifunctional SiH_x–NH_y–PMHS without using strong stabilizers was applied to synthesize Ag NPs of around 2 nm size.

Synthesis and scale-up of water-soluble quaternary cationic monomers in a continuous flow system

A novel, simple, power-saving and effective method for the synthesis and scale-up of cationic water-soluble polyelectrolytes represented by dimethyldiallylammonium chloride (DMDAAC) with commercially available reagents in a two-step continuous flow system has been developed.

Synthesis of benzimidazolones by immobilized gold nanoparticles on chitosan extracted from shrimp shells supported on fibrous phosphosilicate

We demonstrate the synthesis of benzimidazolones from o-phenylenediamines and CO₂ in the presence of gold nanoparticles supported on a composite material based on microcrystalline chitosan from shrimp shells and fibrous phosphosilicate.

Monodispersed Ag Nanoparticle in Layered Double Hydroxides as Matrix for Laser Desorption/Ionization Mass Spectrometry

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) in the low-molecular-weight (LMW) range is a long-standing challenge because of the fragments from the matrix and the heterogeneity of the matrix-analyte crystals. In this work, a homogeneous film with the monodispersed Ag nanoparticles (Ag NPs) in the confined interlayer of layered double hydroxides (LDHs) has been achieved. The Ag NPs with advantageous optical absorption could realize the energy capture and transfer process, and LDHs with abundant hydroxyl groups are beneficial for the deprotonated reaction. Therefore, the as-prepared film exhibited interference-free deprotonated signals in negative-ion mode with high ionization efficiency. The uniform matrix-analyte spots were constructed through the homogeneous assembly process, contributing to the high reproducibility for both the liquid and gaseous samples. Good linearities were successfully realized in the range from 0.1 μM to 1.0 mM for glucose with the relative standard deviation (RSD) of 3.8%, and 0.2-2.0 mM with the average RSD of 4.5% for psoralen samples, respectively. It is believed that the proposed matrix could exhibit competitive advantages for MALDI detection in the LMW region, which may provide new insight into development for MALDI mass detection.

Ultrasound-assisted fabrication of metal nano-porous shells across polymer beads and their catalytic activity for reduction of 4-nitrophenol

Metal nano-porous architectures are a novel class of nanomaterials which has been applied in the fields of catalysis, sensing and gas storage because of their high surface-to-volume ratio, high mechanical strength and long-range ordered architectures. A commonly-used synthetic strategies to achieve architectures with high precision and diverse porosity design is the seed-and-growth method. In this work, using a dual-frequency sequential sonication approach, we have demonstrated a sonochemical-assisted one-pot seeding with a successive shell growth synthetic strategy for mesoporous metal deposition via a gold (Au) nanoparticle and poly(styrene) beads system. A uniform coating of gold nanoparticle seeds with dense surface coverage was formed by first employing 300 kHz ultrasound irradiation while the nano-porous shell growth was then performed under 1 MHz ultrasonic frequency. The precise control over the process conditions and parameters allowed for the design of well-defined shell thicknesses and surface roughness and area. The catalytic property of the MNMs was evaluated for the degradation of 4-nitrophenol and a high catalytic activity was achieved for the most porous gold structures, suggesting synergistic effects between the architecture of the nanomaterials and their surface reactivity.

Fabrication of tubular braid reinforced PMIA nanofiber membrane with mussel-inspired Ag nanoparticles and its superior performance for the reduction of 4-nitrophenol

A novel tubular braid reinforced (TBR) PMIA/CA-PEI/Ag nanofiber membrane for application in dynamic catalysis was introduced in this study. The preparation method of the TBR PMIA/CA-PEI/Ag nanofiber membrane was facile and efficient. The TBR PMIA/CA-PEI/Ag nanofiber membrane was characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and thermal gravimetric analysis (TGA). The mechanical properties were evaluated by a universal material testing machine. The tensile strength of TBR nanofiber membrane exceeded 500 MPa, whereas that of the nanofiber membrane without reinforcement was merely 10 MPa. Besides, the compressive strength of the TBR nanofiber membrane was also reinforced, which indicated that the TBR nanofiber membrane could withstand a higher operating pressure. The reduction of 4-NP to 4-AP was selected as the model reaction to evaluate the catalytic property of TBR PMIA/CA-PEI/Ag nanofiber membrane. The apparent rate constant of dynamic catalysis was 34.58 times higher than that of static catalysis. After 10 cycles, the conversion of 4-NP was still higher than 95.3%. This indicated that the TBR PMIA/CA-PEI/Ag nanofiber membrane had superior stability and recyclability. Besides, the TBR PMIA/CA-PEI/Ag nanofiber membrane also showed superior catalytic performance when it was used for catalyzing other environmental pollutants.

A direct assay of carboxyl-containing small molecules by SALDI-MS on a AgNP/rGO-based nanoporous hybrid film

Silver nanoparticles (AgNPs) and reduced graphene oxide (rGO) hybrid nanoporous structures fabricated by the layer-by-layer (LBL) electrostatic self-assembly have been applied as a simple platform for the rapid analysis of carboxyl-containing small molecules by surface-assisted laser desorption/ionization (D/I) mass spectrometry (SALDI-MS). By the simple one-step deposition of analytes onto the (AgNP/rGO)9 multilayer film, the MS measurements of various carboxyl-containing small molecules (including amino acids, fatty acids and organic dicarboxylic acids) can be done. In contrast to other energy transfer materials relative to AgNPs, the signal interferences of a Ag cluster (Agn(+) or Agn(-)) and a C cluster (Cn(+) or Cn(-)) have been effectively reduced or eliminated. The effects of various factors, such as the pore structure and composition of the substrates, on the efficiency of D/I have been investigated by comparing with the (AgNP)9 LBL nanoporous structure, (AgNP/rGO)9/(SiO2NP)6 LBL multilayer film and AgNP/prGO nanocomposites.

Facile synthesis of dispersed Ag nanoparticles on chitosan-TiO2 composites as recyclable nanocatalysts for 4-nitrophenol reduction

This paper presents a facile, rapid, and controllable procedure for the recovery of trace Ag⁺ ions and in situ assembly of well dispersed Ag nanoparticles on chitosan-TiO₂ composites through bioaffinity adsorption followed by photocatalytic reduction. The prepared Ag nanoparticles are proven to be efficient and recyclable nanocatalysts for the reduction of 4-nitrophenol to 4-aminophenol in the presence of NaBH₄. Well dispersed quasi-spherical Ag NPs are synthesized in 20 min in the designed inner-irradiated photocatalytic system under a wide range of Ag⁺ concentrations (50-200 mg l^-1), temperatures (10 °C-25 °C) conditions, and UV or visible light irradiation. The synthesized Ag NPs can catalyze the reduction of 4-nitrophenol by NaBH₄ at 100% conversion in 120 min and preserve the catalytic activity in five successive cycles. This procedure for trace Ag⁺ ions recovery and Ag NPs assembly has the potential to be scaled up for the mass production of recyclable Ag nanocatalysts. The present work provides a green and efficient procedure for the conversion of hazardous 4-nitrophenol to industrially important 4-aminophenol and also sheds a light on designing scaled-up procedures for treating high volumes of wastewater with dilute heavy metals to produce recyclable metallic nanocatalysts in aqueous systems.

Hematite/silica nanoparticle bilayers on mica: AFM and electrokinetic characterization

Tuning the properties of bilayers by controlled deposition of nanoparticles.

Facile Synthesis of Catalytic AuPd Nanoparticles within Capillary Microreactors Using Polyelectrolyte Multilayers for the Direct Synthesis of H2O2

Microreactors present innovative solutions for problems pertaining to conventional reactors and therefore have seen successful application in several industrial processes. Yet, its application in heterogeneously catalyzed gas-liquid reactions has been challenging, mainly due to the lack of an easy and flexible methodology for catalyst incorporation inside these reactors. Herein, we report a facile technique for obtaining small (<2 nm) and well-distributed catalytic nanoparticles on the walls of silica-coated capillaries, that act as micro(channel) reactors. These particles are formed in situ on the reactor walls using polyelectrolyte multilayers (PEMs), built by layer-by-layer self-assembly. Manipulating the PEMs' synthesis condition gives easy control over metal loading, without compromising on particle size. Both monometallic (Au and Pd) and bimetallic (AuPd) nanoparticles were successfully obtained using this technique. Finally, these catalytic microreactors were found to exhibit exceptional activity for the direct synthesis of hydrogen peroxide from H2 and O2.

Tunable preparation of ruthenium nanoparticles with superior size-dependent catalytic hydrogenation properties

Ruthenium (Ru) featured with an unusual catalytic behavior is of great significance in several heterogeneous and electro-catalytic reactions. The preparation of tractable Ru nanocatalysts and the building of highly active catalytic system at ambient temperature remains a grand challenge. Herein, a facile strategy is developed for the controllable preparation of Ru nanoparticles (NPs) with the sizes ranging from 2.6 to 51.5nm. Ru NPs show superior size-dependent catalytic performance with the best kinetic rate constant as high as -1.52min^-1, which could far surpass the other traditional noble metals. Ru NPs exert exceedingly efficient low-temperature catalytic activity and good recyclability in the catalytic reduction of nitroaromatic compounds (NACs) and azo dyes. The developed catalytic system provides a distinguishing insight for the artificial preparation of Ru NPs with desired sizes, and allows for the development of rational design rules for exploring catalysts with superior catalytic performances, potentially broadening the applications of metallic NP-enabled catalytic analysis.

A Multifunctional Tb-MOF for Highly Discriminative Sensing of Eu3+ /Dy3+ and as a Catalyst Support of Ag Nanoparticles

Exploring novel multifunctional rare earth materials is very important because these materials have fundamental interests, such as new structural facts and connecting modes, as well as potential technological applications, including optics, magnetic properties, sorption, and catalytic behaviors. Especially, employing these nanomaterials for sensing or catalytic reactions is still very challenging. Herein, a new superstable, anionic terbium-metal-organic-framework, [H₂ N(CH₃ )₂ ][Tb(cppa)₂ (H₂ O)₂ ], (China Three Gorges University (CTGU-1), H₂ cppa = 5-(4-carboxyphenyl)picolinic acid), is successfully prepared, which can be used as a turn-on, highly-sensitive fluorescent sensor to detect Eu³⁺ and Dy³⁺ , with a detection limitation of 5 × 10^-8 and 1 × 10^-4 m in dimethylformamide, respectively. This result represents the first example of lanthanide-metal-organic-frameworks (Ln-MOF) that can be employed as a discriminative fluorescent probe to recognize Eu³⁺ and Dy³⁺ . In addition, through ion exchanging at room temperature, Ag(I) can be readily reduced in situ and embedded in the anionic framework, which leads to the formation of nanometal-particle@Ln-MOF composite with uniform size and distribution. The as-prepared Ag@CTGU-1 shows remarkable catalytic performance to reduce 4-nitrophenol, with a reduction rate constant κ as large as 2.57 × 10^-2 s^-1 ; almost the highest value among all reported noble-metal-nanoparticle@MOF composites.