Self-assembled ultra-high aspect ratio silver nanochains

1D Colloidal chains: recent progress from formation to emergent properties and applications

Integrating nanoscale building blocks of low dimensionality (0D; i.e., spheres) into higher dimensional structures endows them and their corresponding materials with emergent properties non-existent or only weakly existent in the individual building blocks. Constructing 1D chains, 2D arrays and 3D superlattices using nanoparticles and colloids therefore continues to be one of the grand goals in colloid and nanomaterial science. Amongst these higher order structures, 1D colloidal chains are of particular interest, as they possess unique anisotropic properties. In recent years, the most relevant advances in 1D colloidal chain research have been made in novel synthetic methodologies and applications. In this review, we first address a comprehensive description of the research progress concerning various synthetic strategies developed to construct 1D colloidal chains. Following this, we highlight the amplified and emergent properties of the resulting materials, originating from the assembly of the individual building blocks and their collective behavior, and discuss relevant applications in advanced materials. In the discussion of synthetic strategies, properties, and applications, particular attention will be paid to overarching concepts, fresh trends, and potential areas of future research. We believe that this comprehensive review will be a driver to guide the interdisciplinary field of 1D colloidal chains, where nanomaterial synthesis, self-assembly, physical property studies, and material applications meet, to a higher level, and open up new research opportunities at the interface of classical disciplines.

Linear assembly of lead bromide-based nanoparticles inside lead(ii) polymers prepared by mixing the precursors of both the nanoparticle and the polymer

Preparation of 1D assemblies of lead halide-based nanoparticles inside a lead bromide polymer by concurrent formation of lead(ii) oligomers and the nanoparticles in the presence of cyclohexanemethylammonium bromide.

The structure and bonding properties of tiopronin-protected silver nanoparticles as studied by X-ray absorption spectroscopy

Thiolate-protected Ag nanoparticles (NPs) exhibit interesting physical and chemical properties which may lead to various sensing, diagnostic, and therapeutic applications. Further, understanding structure–property relationships of Ag NPs is of great interest to optimize their application. Herein, we used TEM, UV–vis, and a series of synchrotron X-ray spectroscopy techniques to probe the local structure and chemical bonding properties of thiolate-stabilized Ag NPs. Compared with other Ag nanostructures prepared under slightly modified conditions, the Ag NPs were found to have pronounced structural changes, which led to immensely different optical properties. Notably, the NPs were also found to have similar surface structure to recently elucidated Ag nanoclusters prepared with different thiolates. These findings suggest that the NP structure and optical properties can be sensitively tailored by controlling the synthetic conditions. The multi-element, multi-core excitation approach (i.e., Ag K-, Ag L3-, and S K-edges) employed in the X-ray absorption spectroscopy measurements was also demonstrated as an effective tool to uncover the NP structure from both the metal core and the ligand shell perspectives.

Surfactant-Assisted Voltage-Driven Silver Nanoparticle Chain Formation across Microelectrode Gaps in Air

Here we describe the electrodeposition of Ag in the presence of cetyltrimethylammonium bromide (CTAB) onto 5 μm gap Au interdigitated array (IDA) electrodes that are bare, thiol-functionalized, or thiol-functionalized and seeded with 4 nm diameter Au nanoparticles (NPs). After deposition, applying a voltage between 5 and 10 V in air for 0 to 1000 s resulted in one-dimensional (1D) Ag NP chains spanning across the IDA gap. The Ag NP chains form on IDAs functionalized with thiols and Au NP-seeded at about 5 V and at 10 V for the other nonseeded surfaces. Ag NP chains do not form at all up to 10 V when IDAs are treated with ozone or water soaking to remove possible CTA(+) ions from the surface, when Ag deposition takes place in the absence of CTAB, or when the voltage is applied under dry N2 (low humidity). Chain formation occurs by Ag moving from the positive to negative electrode. Coating the devices with a negatively charged surfactant, sodium dodecyl sulfate, also results in Ag NP chains by Ag moving from the positive to the negative electrodes, which confirms that the chains form by electrochemical oxidation at the positive electrode and deposition at the negative electrode. The surfactant ions and thin layer of water present in the humid environment facilitate this electrochemical process.

Reversibly Switching Silver Hierarchical Structures via Reaction Kinetics

Here we report a study on controllable synthesis of hierarchical silver structures via regulating reaction kinetics. Silver particles with various morphologies are synthesized by a solution-based reduction approach at the addition of amino acids. The amino acid is used to coordinate with silver ions to slow down the reduction of silver ions. With the increase of glycine concentration, the morphologies of silver particles switch from dendrites, to flowers and to compacted spheres, which is attributed to the decrease of reaction rate as a result of the coordination. Three more amino acids are examined and confirms the role of reaction kinetic in shaping silver particles. Furthermore, by increasing the concentration of the reductant, the silver morphologies change from compact spheres to loose flowers as a result of the increase of reaction rate. Therefore the silver hierarchical structure can be reversibly switched by reaction kinetics. The silver particles synthesized are tested for surface enhanced Raman scattering (SERS) property and the dendritic particles present a remarkable SERS activity. This study shows that reaction kinetics is a powerful tool to tune hierarchical structures of silver particles, which is expected to be transferable to other material systems.

A new silver nanochain SERS analytical platform to detect trace hexametaphosphate with a rhodamine S molecular probe

Using AgNO3 as the precursor, stable silver nanochain (AgNC) sols, orange-red in color, were prepared using hydrazine hydrate. A strong surface plasmon resonance Rayleigh scattering (RRS) peak occurred at 420 nm plus two surface plasmon resonance (SPR) absorption peaks at 410 nm and 510 nm. Rhodamine S (RhS) cationic dye was absorbed on the as-prepared AgNC substrate to obtain a RhS-AgNC surface-enhanced Raman scattering (SERS) nanoprobe that exhibited a strong SERS peak at 1506 cm(-1) and a strong RRS peak at 375 nm. Upon addition of the analyte sodium hexametaphosphate (HP), it reacted with RhS, which resulted in a decrease in the SERS and RRS peaks that was studied in detail. The decreased SERS and RRS intensities correlated linearly with HP concentration in the range of 0.0125-0.3 µmol/L and 0.05-1.0 µmol/L, with a detection limit of 6 nmol/L and 20 nmol/L HP respectively. Due to advantages of high sensitivity, good selectivity and simple operation, the RhS molecular probes were used to determine HP concentration in real samples.

Surfactant assisted formation of ruthenium nanochains under mild conditions and their catalytic CO oxidation activity

Spontaneous formation of ruthenium nanochains is accomplished in aqueous medium under mild conditions using a seed mediated protocol with cetyl trimethylammonium bromide (CTAB) as the capping agent. They are formed due to the random self-assembly of Ru seeds of ∼3.5 nm size. These 1D nanostructures exhibit better catalytic activity towards the oxidation of CO relative to the ∼3.5 nm seeds and 6 nm Ru nanospheres. The synthesis strategy adopted here is found to be simple, facile and environmentally friendly.

Controlling the synthesis and assembly of fluorescent Au/Ag alloy nanoclusters

Self-assembly of water-soluble fluorescent thiolated Au/Ag alloy NCs into 1D nanostructures in water is demonstrated. Fluorescent Au/Ag alloy NCs with high stability were synthesized through galvanic replacement, starting from nonemissive and unstable AgNC precursors. Then a facile ultrasound method was used to induce a thiolate-driven self-assembly process.

Spontaneous assembly of iridium nanochain-like structures: surface enhanced Raman scattering activity using visible light

A facile, environmentally friendly approach to synthesize branched Ir nanochain-like structures under mild conditions results in nanostructures that serve as active substrates for surface enhanced Raman scattering studies .