Magnetic-mechanical-electrical-optical coupling effects in GaN-based LED/rare-earth terfenol-D structures

Bending Analysis of Multiferroic Semiconductor Composite Beam towards Smart Cement-Based Materials

A beam-like structure of antisymmetric laminated multiferroic piezoelectric semiconductor (LMPS), which consists of two piezomagnetic (PM) and two piezoelectric semiconductor (PS) layers is proposed. The structure could be in pure flexure deformation under an applied magnetic field. Through this deformation mode and the induced polarization field through the magneto-electro-semiconductive (MES) coupling mechanism, the semiconducting properties of PS layers can be manipulated by the applied magnetic field. In order to better understand and quantitatively describe this deformation mode, the one-dimensional governing equations for the LMPS beam are developed based on the three-dimensional theory. The analytical solutions are then presented for the LMPS cantilever beam with open-circuit conditions. The multi-field coupling responses of the LMPS cantilever beam under the longitudinal magnetic field are investigated. Numerical results show that the amplitude of each physical quantity is proportional to the applied magnetic field, and the thickness ratio of the PS phase plays a significant role in the MES coupling behaviors of the LMPS beam. The proposed structure can be integrated into cement structures but also fabricated cement-based multiferroic PS composite materials and structures. It provides an important material and structure basis for developing structural health monitoring systems in the fields of civil and transportation infrastructures.

High Performance, Stable, and Flexible Piezoelectric Nanogenerator Based on GaN:Mg Nanowires Directly Grown on Tungsten Foil

Rapid development of micro-electromechanical systems increases the need for flexible and durable piezoelectric nanogenerators (f-PNG) with high output power density. In this study, a high-performance, flexible, and highly stable f-PNG is prepared by directly growing the Mg-doped semi-insulating GaN nanowires (NWs) on a 30-µm-thick tungsten foil using vapor-liquid-solid growth mechanism. The direct growth of NWs on metal foil extends the overall lifetime of the f-PNG. The semi-insulating GaN NWs significantly enhance the piezoelectric performance of the f-PNG by reducing free electron density. Additionally, the direct integration of NWs on the tungsten foil improves the conductivity, resulting in current enhancement (2.5 mA) with an output power density of 13 mW cm^-2 . The piezoelectric performance of the f-PNG is investigated under several bending angles, actuation frequencies, continuous vibrations, and airflow velocities. The maximum output voltage exhibited by the f-PNG is 20 V at a bending angle of 155°. The f-PNG is connected to the backside of an index finger to monitor finger bending behavior by changing the current density. Depending on its flexibility and sensitivity, the f-PNG can be used as a health-monitoring sensor to be mounted on joints (fingers, hands, elbows, and knees) to monitor their repeated bending and relaxation.

Enhanced Heat Dissipation in Gallium Nitride-Based Light-Emitting Diodes by Piezo-phototronic Effect

As a new generation of light sources, GaN-based light-emitting diodes (LEDs) have wide applications in lighting and display. Heat dissipation in LEDs is a fundamental issue that leads to a decrease in light output, a shortened lifespan, and the risk of catastrophic failure. Here, the temperature spatial distribution of the LEDs is revealed by using high-resolution infrared thermography, and the piezo-phototronic effect is proved to restrain efficaciously the temperature increment for the first time. We observe the temperature field and current density distribution of the LED array under external strain compensation. Specifically, the temperature rise caused by the self-heating effect is reduced by 47.62% under 0.1% external strain, which is attributed to the enhanced competitiveness of radiative recombination against nonradiative recombination due to the piezo-phototronic effect. This work not only deepens the understanding of the piezo-phototronic effect in LEDs but also provides a novel, easy-to-implement, and economical method to effectively enhance thermal management.

Magnetically Induced Carrier Distribution in a Composite Rod of Piezoelectric Semiconductors and Piezomagnetics

In this work, we study the behavior of a composite rod consisting of a piezoelectric semiconductor layer and two piezomagnetic layers under an applied axial magnetic field. Based on the phenomenological theories of piezoelectric semiconductors and piezomagnetics, a one-dimensional model is developed from which an analytical solution is obtained. The explicit expressions of the coupled fields and the numerical results show that an axially applied magnetic field produces extensional deformation through piezomagnetic coupling, the extension then produces polarization through piezoelectric coupling, and the polarization then causes the redistribution of mobile charges. Thus, the composite rod exhibits a coupling between the applied magnetic field and carrier distribution through combined piezomagnetic and piezoelectric effects. The results have potential applications in piezotronics when magnetic fields are relevant.

Piezotronics and Piezo-phototronics of Third Generation Semiconductor Nanowires

With the fast development of nanoscience and nanotechnology in the last 30 years, semiconductor nanowires have been widely investigated in the areas of both electronics and optoelectronics. Among them, representatives of third generation semiconductors, such as ZnO and GaN, have relatively large spontaneous polarization along their longitudinal direction of the nanowires due to the asymmetric structure in their c-axis direction. Two-way or multiway couplings of piezoelectric, photoexcitation, and semiconductor properties have generated new research areas, such as piezotronics and piezo-phototronics. In this review, an in-depth discussion of the mechanisms and applications of nanowire-based piezotronics and piezo-phototronics is presented. Research on piezotronics and piezo-phototronics has drawn much attention since the effective manipulation of carrier transport, photoelectric properties, etc. through the application of simple mechanical stimuli and, conversely, since the design of new strain sensors based on the strain-induced change in semiconductor properties.

Enhanced NO2 gas sensing of a single-layer MoS2 by photogating and piezo-phototronic effects

NO₂ sensors with ultrahigh sensitivity are demanded for future electronic sensing systems. However, traditional sensors are considerably limited by the relative low sensitivity, high cost and complicated process. Here, we report a simply and reliable flexible NO₂ sensor based on single-layer MoS₂. The flexible sensor exhibits high sensitivity to NO₂ gas due to ultra-large specific surface area and the nature of two-dimensional (2D) semiconductor. When the NO₂ is 400 ppb (parts per billion), compared with the dark and strain-free conditions, the sensitivity of the single-layer sensor is enhanced to 671% with a 625 nm red light-emitting diode (LED) illumination of 4 mW/cm² power under 0.67% tensile strain. More important, the response time is dramatically reduced to ∼16 s and it only needs ∼65 s to complete 90% recovery. A theoretical model is proposed to discuss the microscopic mechanisms. We find that the remarkable sensing characteristics are the result of coupling among piezoelectricity, photoelectricity and adsorption-desorption induced charges transfer in the single-layer MoS₂ Schottky junction based device. Our work opens up the way to further enhancements in the sensitivity of gas sensor based on single-layer MoS₂ by introducing photogating and piezo-phototronic effects in mesoscopic systems.

Probing of Local Multifield Coupling Phenomena of Advanced Materials by Scanning Probe Microscopy Techniques

The characterization of the local multifield coupling phenomenon (MCP) in various functional/structural materials by using scanning probe microscopy (SPM)-based techniques is comprehensively reviewed. Understanding MCP has great scientific and engineering significance in materials science and engineering, as in many practical applications, materials and devices are operated under a combination of multiple physical fields, such as electric, magnetic, optical, chemical and force fields, and working environments, such as different atmospheres, large temperature fluctuations, humidity, or acidic space. The materials' responses to the synergetic effects of the multifield (physical and environmental) determine the functionalities, performance, lifetime of the materials, and even the devices' manufacturing. SPM techniques are effective and powerful tools to characterize the local effects of MCP. Here, an introduction of the local MCP, the descriptions of several important SPM techniques, especially the electrical, mechanical, chemical, and optical related techniques, and the applications of SPM techniques to investigate the local phenomena and mechanisms in oxide materials, energy materials, biomaterials, and supramolecular materials are covered. Finally, an outlook of the MCP and SPM techniques in materials research is discussed.

Color-Tunable Binuclear (Eu, Tb) Nanocomposite Powder for the Enhanced Development of Latent Fingerprints Based on Electrostatic Interactions

Fluorescence color of rare earth-based nanopowder can be modulated by regulating the molar ratio of components, which offers a promising strategy in many fields of applications. Herein, a series of binuclear Eu _xTb_{1- x}(AA)₃Phen ( x = 1, 0.75, 0.5, 0.25, 0.1, 0) complexes were fabricated using acrylic acid (AA) as the first ligand and using 1,10-phenanthroline (Phen) as the second ligand. The characterization results showed that this novel binuclear (Eu, Tb) complex can emit strong red or green light via simply varying the molar ratio of europium and terbium. Moreover, the results of spectroscopic and zeta potential analyses suggested that there was an electrostatic adherence mode in the interaction between the Eu _xTb_{1- x}(AA)₃Phen complex and fingerprint residues. Importantly, our Eu _xTb_{1- x}(AA)₃Phen nanopowder was successfully applied to the enhanced development of latent fingerprints on various surfaces by the powder dusting method, exhibiting a high contrast, sensitivity, and selectivity, as well as a low detection limit in forensic science, which was further confirmed by analysis with an automatic fingerprint identification system. In summary, our synthetic rare earth-based nanopowder exhibits promise as an ideal fluorescent probe for the enhanced development of latent fingerprints, based not only on physical absorption at the macrolevel but also on electrostatic interactions between our rare earth complex and fingerprint residues at the molecular level, which could provide an enhanced affinity compared with traditional fingerprint powders.

Strain-Controlled Recombination in InGaN/GaN Multiple Quantum Wells on Silicon Substrates

This paper reports the photoluminescence (PL) properties of InGaN/GaN multiple quantum well (MQW) light-emitting diodes grown on silicon substrates which were designed with different tensile stress controlling architecture like periodic Si δ-doping to the n-type GaN layer or inserting InGaN/AlGaN layer for investigating the strain-controlled recombination mechanism in the system. PL results turned out that tensile stress released samples had better PL performances as their external quantum efficiencies increased to 17%, 7 times larger than the one of regular sample. Detail analysis confirmed they had smaller nonradiative recombination rates ((2.5~2.8)×10^-2 s^-1 compared to (3.6~4.7)× 10^-2 s^-1), which was associated with the better crystalline quality and absence of dislocations or cracks. Furthermore, their radiative recombination rates were found more stable and were much higher ((5.7~5.8) ×10^-3 s^-1 compared to [9~7] ×10^-4 s^-1) at room temperature. This was ascribed to the suppression of shallow localized states on MQW interfaces, leaving the deep radiative localization centers inside InGaN layers dominating the radiative recombination.

Electric-field driven photoluminescence probe of photoelectric conversion in InGaN-based photovoltaics

The spatial distribution of electric field in photovoltaic multiple quantum wells (MQWs) is extremely important to dictate the mutual competition of photoelectric conversion and optical transition. Here, electric-field-driven photoluminescence (PL) in both steady-state and transient-state has been utilized to directly investigate the internal photoelectric conversion processes in InGaN-based MQW photovoltaic cell. As applying the reversed external electric field, the compensation of the quantum confined stark effect (QCSE) in InGaN QW is beneficial to help the photoabsorbed minor carriers drift out from the localized states, whereas extremely weakening the PL radiative recombination. A directly driven force by the reversed external electric field decreases the transit time of photocarriers drifting in InGaN QW. And hence, the overall dynamic PL decay including both the slow and fast processes gradually speeds up from 19.2 ns at the open-circuit condition to 3.9 ns at a negative bias of -3 V. In particular, the slow PL decay lifetime declines more quickly than that of the fast one. It is the delocalization of photocarriers by electric-field drift that helps to further enhance the high-efficiency photoelectric conversion except for the tunneling transport in InGaN-based MQW photovoltaics. Therefore, it can be concluded that the electric-field PL probe may provide a direct method for evaluating the photoelectric conversion in multilayer quantum structures and related multijunction photovoltaic cells.

Magnetic-Induced-Piezopotential Gated MoS2 Field-Effect Transistor at Room Temperature

Utilizing magnetic field directly modulating/turning the charge carrier transport behavior of field-effect transistor (FET) at ambient conditions is an enormous challenge in the field of micro-nanoelectronics. Here, a new type of magnetic-induced-piezopotential gated field-effect-transistor (MIPG-FET) base on laminate composites is proposed, which consists of Terfenol-D, a ferroelectric single crystal (PMNPT), and MoS₂ flake. When applying an external magnetic field to the MIPG-FET, the piezopotential of PMNPT triggered by magnetostriction of the Terfenol-D can serve as the gate voltage to effectively modulate/control the carrier transport process and the corresponding drain current at room temperature. Considering the two polarization states of PMNPT, the drain current is diminished from 9.56 to 2.9 µA in the P_up state under a magnetic field of 33 mT, and increases from 1.41 to 4.93 µA in the P_down state under a magnetic field of 42 mT and at a drain voltage of 3 V. The current on/off ratios in these states are 330% and 432%, respectively. This work provides a novel noncontact coupling method among magnetism, piezoelectricity, and semiconductor properties, which may have extremely important applications in magnetic sensors, memory and logic devices, micro-electromechanical systems, and human-machine interfacing.

Piezo-Phototronic Matrix via a Nanowire Array

Piezoelectric semiconductors, such as ZnO and GaN, demonstrate multiproperty coupling effects toward various aspects of mechanical, electrical, and optical excitation. In particular, the three-way coupling among semiconducting, photoexcitation, and piezoelectric characteristics in wurtzite-structured semiconductors is established as a new field, which was first coined as piezo-phototronics by Wang in 2010. The piezo-phototronic effect can controllably modulate the charge-carrier generation, separation, transport, and/or recombination in optical-electronic processes by modifying the band structure at the metal-semiconductor or semiconductor-semiconductor heterojunction/interface. Here, the progress made in using the piezo-phototronic effect for enhancing photodetectors, pressure sensors, light-emitting diodes, and solar cells is reviewed. In comparison with previous works on a single piezoelectric semiconducting nanowire, piezo-phototronic nanodevices built using nanowire arrays provide a promising platform for fabricating integrated optoelectronics with the realization of high-spatial-resolution imaging and fast responsivity.

Enhanced Solar Cell Conversion Efficiency of InGaN/GaN Multiple Quantum Wells by Piezo-Phototronic Effect

The piezo-phototronic effect is the tuning of piezoelectric polarization charges at the interface to largely enhance the efficiency of optoelectronic processes related to carrier separation or recombination. Here, we demonstrated the enhanced short-circuit current density and the conversion efficiency of InGaN/GaN multiple quantum well solar cells with an external stress applied on the device. The external-stress-induced piezoelectric charges generated at the interfaces of InGaN and GaN compensate the piezoelectric charges induced by lattice mismatch stress in the InGaN wells. The energy band realignment is calculated with a self-consistent numerical model to clarify the enhancement mechanism of optical-generated carriers. This research not only theoretically and experimentally proves the piezo-phototronic effect modulated the quantum photovoltaic device but also provides a great promise to maximize the use of solar energy in the current energy revolution.

Transparent, Flexible Piezoelectric Nanogenerator Based on GaN Membrane Using Electrochemical Lift-Off

A transparent and flexible piezoelectric nanogenerator (TF PNG) is demonstrated based on a GaN membrane fabricated by electrochemical lift-off. Under shear stress on the TF PNG by finger force (∼182 mN), the GaN membrane effectively undergoes normal stress and generates piezoelectric polarization along the c-axis, resulting in the generation of piezoelectric output from the TF PNG. Although the GaN layer is 315 times thinner than the flexible polyethylene terephthalate (PET) substrate, the low Young's modulus of PET allows the GaN membranes to absorb ∼41% of the applied strain energy, which leads to their large lattice deformation under extremely low applied stress. Maximum output voltage and current values of 4.2 V and 150 nA are obtained, and the time decay of the output voltage is discussed.

Tuning carrier lifetime in InGaN/GaN LEDs via strain compensation for high-speed visible light communication

In recent years, visible light communication (VLC) technology has attracted intensive attention due to its huge potential in superior processing ability and fast data transmission. The transmission rate relies on the modulation bandwidth, which is predominantly determined by the minority-carrier lifetime in III-group nitride semiconductors. In this paper, the carrier dynamic process under a stress field was studied for the first time, and the carrier recombination lifetime was calculated within the framework of quantum perturbation theory. Owing to the intrinsic strain due to the lattice mismatch between InGaN and GaN, the wave functions for the holes and electrons are misaligned in an InGaN/GaN device. By applying an external strain that "cancels" the internal strain, the overlap between the wave functions can be maximized so that the lifetime of the carrier is greatly reduced. As a result, the maximum speed of a single chip was increased from 54 MHz up to 117 MHz in a blue LED chip under 0.14% compressive strain. Finally, a bandwidth contour plot depending on the stress and operating wavelength was calculated to guide VLC chip design and stress optimization.

Piezo-Phototronic Effect in a Quantum Well Structure

With enhancements in the performance of optoelectronic devices, the field of piezo-phototronics has attracted much attention, and several theoretical works have been reported based on semiclassical models. At present, the feature size of optoelectronic devices are rapidly shrinking toward several tens of nanometers, which results in the quantum confinement effect. Starting from the basic piezoelectricity equation, Schrödinger equation, Poisson equation, and Fermi's golden rule, a self-consistent theoretical model is proposed to study the piezo-phototronic effect in the framework of perturbation theory in quantum mechanics. The validity and universality of this model are well-proven with photoluminescence measurements in a single GaN/InGaN quantum well and multiple GaN/InGaN quantum wells. This study provides important insight into the working principle of nanoscale piezo-phototronic devices as well as guidance for the future device design.

Density functional studies on wurtzite piezotronic transistors: influence of different semiconductors and metals on piezoelectric charge distribution and Schottky barrier

The mechanical-electrical coupling properties of piezoelectric semiconductors endow these materials with novel device applications in microelectromechanical systems, sensors, human-computer interfaces, etc. When an applied strain is exerted on a piezoelectric semiconductor, piezoelectric charges are generated at the surface or interface of the semiconductor, which can be utilized to control the electronic transport characteristics. This is the fundamental working mechanism of piezotronic devices, called the piezotronic effect. In the present report, a series of piezotronic transistors composed of different electrode metals and semiconductors is examined using density functional theory calculation. It is found that the influence of semiconductors on the piezotronic effect is larger than the impact of metals, and GaN and CdS are promising candidates for piezotronic and piezo-phototronic devices, respectively. The width of the piezoelectric charge distribution obtained in the present study can be used as a parameter in classical finite-element-method based simulations, which provide guidance on designing high-performance piezotronic devices.

Flexible Self-Powered GaN Ultraviolet Photoswitch with Piezo-Phototronic Effect Enhanced On/Off Ratio

Flexible self-powered sensing is urgently needed for wearable, portable, sustainable, maintenance-free and long-term applications. Here, we developed a flexible and self-powered GaN membrane-based ultraviolet (UV) photoswitch with high on/off ratio and excellent sensitivity. Even without any power supply, the driving force of UV photogenerated carriers can be well boosted by the combination of both built-in electric field and piezoelectric polarization field. The asymmetric metal-semiconductor-metal structure has been elaborately utilized to enhance the carrier separation and transport for highly sensitive UV photoresponse. Its UV on/off ratio and detection sensitivity reach to 4.67 × 10(5) and 1.78 × 10(12) cm·Hz(0.5) W(1-), respectively. Due to its excellent mechanical flexibility, the piezoelectric polarization field in GaN membrane can be easily tuned/controlled based on piezo-phototronic effect. Under 1% strain, a stronger and broader depletion region can be obtained to further enhance UV on/off ratio up to 154%. As a result, our research can not only provide a deep understanding of local electric field effects on self-powered optoelectronic detection, but also promote the development of self-powered flexible optoelectronic devices and integrated systems.

Piezo-Phototronic Effect Controlled Dual-Channel Visible light Communication (PVLC) Using InGaN/GaN Multiquantum Well Nanopillars

Visible light communication (VLC) simultaneously provides illumination and communication via light emitting diodes (LEDs). Keeping a low bit error rate is essential to communication quality, and holding a stable brightness level is pivotal for illumination function. For the first time, a piezo-phototronic effect controlled visible light communication (PVLC) system based on InGaN/GaN multiquantum wells nanopillars is demonstrated, in which the information is coded by mechanical straining. This approach of force coding is also instrumental to avoid LED blinks, which has less impact on illumination and is much safer to eyes than electrical on/off VLC. The two-channel transmission mode of the system here shows great superiority in error self-validation and error self-elimination in comparison to VLC. This two-channel PVLC system provides a suitable way to carry out noncontact, reliable communication under complex circumstances.

High-resolution dynamic pressure sensor array based on piezo-phototronic effect tuned photoluminescence imaging

A high-resolution dynamic tactile/pressure display is indispensable to the comprehensive perception of force/mechanical stimulations such as electronic skin, biomechanical imaging/analysis, or personalized signatures. Here, we present a dynamic pressure sensor array based on pressure/strain tuned photoluminescence imaging without the need for electricity. Each sensor is a nanopillar that consists of InGaN/GaN multiple quantum wells. Its photoluminescence intensity can be modulated dramatically and linearly by small strain (0-0.15%) owing to the piezo-phototronic effect. The sensor array has a high pixel density of 6350 dpi and exceptional small standard deviation of photoluminescence. High-quality tactile/pressure sensing distribution can be real-time recorded by parallel photoluminescence imaging without any cross-talk. The sensor array can be inexpensively fabricated over large areas by semiconductor product lines. The proposed dynamic all-optical pressure imaging with excellent resolution, high sensitivity, good uniformity, and ultrafast response time offers a suitable way for smart sensing, micro/nano-opto-electromechanical systems.