Photoswitchable membranes based on peptide-modified nanoporous anodic alumina: toward smart membranes for on-demand molecular transport

Surface engineering of silica based materials with Ni-Fe layered double hydroxide for the efficient removal of methyl orange: Isotherms, kinetics, mechanism and high selectivity studies

Herein, low-cost diatomite (DE) and bentonite (BE) materials were surface modified with Ni-Fe layered double hydroxide (LDHs) (represented as NFD and NFB respectively), using a simple co-precipitation procedure for the removal of methyl orange (MO) dye from water. The adsorbents of both before and after MO adsorption have been studied by XRD, N₂ adsorption-desorption isotherm, FTIR, FESEM-EDX and XPS characterization. The zeta potential analysis was used to observe the surface charge of adsorbents within the pH ranges of 4-10. The MO removal efficiency was significantly improved after LDHs modification, showing a 94.7% and 92.6% efficiency for NFD and NFB at pH 6, respectively. Whereas bare DE and BE have shown removal efficiency of 15.5% and 4.9% respectively. The maximum adsorption capacities of NFD and NFB using the Langmuir isotherm model were found to be 246.9 mgg^-1 and 215.9 mgg^-1 respectively. The designed NFD showed high selectivity towards anionic-based dyes from water and also the effect of salts shows the dye removal percentage was increased and decreased for the addition of Na₂SO₄ and NaCl, respectively. The reusability of NFD and NFB have been studied for a maximum of five cycles and they can remove MO up to four cycles. Therefore, the designed adsorbents can be very effective towards the removal of MO from water and they may be useful for dye-based wastewater treatment.

Influence of sterilization on the performance of anodized nanoporous titanium implants

Towards clinical translation of bioactive nano-engineered titanium implants, achieving appropriate sterilization and understanding its influence on the modified implant characteristics is essential. With limited studies exploring the influence of sterilization techniques on electrochemically anodized titanium with TiO₂ nanostructures, we aimed to advance this domain by performing an in-depth evaluation of the influence of common sterilization techniques (ethanol immersion, various UV irradiation times, gamma irradiation, and dry/wet autoclaving) on TiO₂ nanopores fabricated on micro-rough Ti surfaces (dual micro-nano) via single step anodization. Various sterilized surfaces were systematically compared in terms of topographical, chemical, crystalline, wettability and mechanical characteristics. Next, we investigated the protein adhesion capacity and functions of primary gingival fibroblasts (proliferation, adhesion/alignment and spreading morphology) to compare the bioactivity of the sterilized nanopores. Ethanol immersion, gamma irradiation and UV irradiation conserved the topography of the fabricated nanopores, while autoclave sterilization (both dry and wet) compromised the nanoporous structures. Various duration of UV-sterilization resulted in no significant changes in the surface topography and chemistry of the fabricated TNPs. Our findings revealed that UV irradiation is the most appropriate technique to sterilize nano-engineered titanium implants for appropriate wettability, protein adhesion capacity and enhanced metabolism and proliferation of human gingival fibroblasts (hGFs). This study systematically investigated the influence of sterilization on anodized nano-engineered titanium implants towards achieving reproducible outcomes (in terms of topography, chemistry and bioactivity), and found that UV irradiation holds great promise for application across different nano-engineered metal surfaces.

Functionalized Porous Hydroxyapatite Scaffolds for Tissue Engineering Applications: A Focused Review

Biomaterials have been widely used in tissue engineering applications at an increasing rate in recent years. The increased clinical demand for safe scaffolds, as well as the diversity and availability of biomaterials, has sparked rapid interest in fabricating diverse scaffolds to make significant progress in tissue engineering. Hydroxyapatite (HAP) has drawn substantial attention in recent years owing to its excellent physical, chemical, and biological properties and facile adaptable surface functionalization with other innumerable essential materials. This focused review spotlights a brief introduction on HAP, scope, a historical outline, basic structural features/properties, various synthetic strategies, and their scientific applications concentrating on functionalized HAP in the diverse area of tissue engineering fields such as bone, skin, periodontal, bone tissue fixation, cartilage, blood vessel, liver, tendon/ligament, and corneal are emphasized. Besides clinical translation aspects, the future challenges and prospects of HAP based biomaterials involved in tissue engineering are also discussed. Furthermore, it is expected that researchers may find this review expedient in gaining an overall understanding of the latest advancement of HAP based biomaterials.

Smart pH-Modulated Two-Way Photoswitch Based on a Polymer-Modified Single Nanochannel

In this article, we have demonstrated a smart pH-modulated two-way photoswitch that can reversibly switch ion transport under alternating light exposure over a wide pH range. This photoswitch was prepared by functionalizing the interior of a single conical glass nanochannel with a poly-spiropyran-linked methacrylate (P-SPMA) polymer through surface-initiated atom transfer radical polymerization. The P-SPMA polymer brushes comprise functional groups that are responsive to light and pH, which can cause configuration and charge changes to affect the properties of the nanochannel wall. The SPMA polymer-modified nanochannel not only reversibly controlled ion transport under alternating light irradiation but also efficiently and flexibly regulated the direction and extent of the ion transport based on the pH. This two-way photoswitch exhibits the considerable potential of photoresponsive polymers for the advancement of "intelligent" bionic nanochannel devices for ion screening and optical sensing in various applications.

A Sensitive FRET Biosensor Based on Carbon Dots-Modified Nanoporous Membrane for 8-hydroxy-2'-Deoxyguanosine (8-OHdG) Detection with Au@ZIF-8 Nanoparticles as Signal Quenchers

A sensitive fluorescence resonance energy transfer (FRET) biosensor is proposed to detect 8-hydroxy-2′-deoxyguanosine (8-OHdG), which is a typical DNA oxidation damage product excreted in human urine. The FRET biosensor was based on carbon dots (CDs)-modified nanoporous alumina membrane with CDs as fluorescence donors. Gold nanoparticles were encapsulated in zeolitic imidazolate framework-8 to form Au@ZIF-8 nanoparticles as signal quenchers. CDs and Au@ZIF-8 nanoparticles were biofunctionalized by 8-OHdG antibody. The capture of 8-OHdG on the membrane substrates can bring Au@ZIF-8 nanoparticles closely to CDs. With 350 nm excitation, the fluorescence of CDs was quenched by Au@ZIF-8 nanoparticles and FRET effect occurred. The quenching efficiency was analyzed. The limit of detection (LOD) was 0.31 nM. Interference experiments of the FRET biosensor showed good specificity for 8-OHdG detection. The biosensor could detect urinary 8-OHdG sensitively and selectively with simple sample pretreatment processes. It shows applicability for detecting biomarkers of DNA damage in urine or other biological fluids.

Silicon Nanofluidic Membrane for Electrostatic Control of Drugs and Analytes Elution

Individualized long-term management of chronic pathologies remains an elusive goal despite recent progress in drug formulation and implantable devices. The lack of advanced systems for therapeutic administration that can be controlled and tailored based on patient needs precludes optimal management of pathologies, such as diabetes, hypertension, rheumatoid arthritis. Several triggered systems for drug delivery have been demonstrated. However, they mostly rely on continuous external stimuli, which hinder their application for long-term treatments. In this work, we investigated a silicon nanofluidic technology that incorporates a gate electrode and examined its ability to achieve reproducible control of drug release. Silicon carbide (SiC) was used to coat the membrane surface, including nanochannels, ensuring biocompatibility and chemical inertness for long-term stability for in vivo deployment. With the application of a small voltage (≤ 3 V DC) to the buried polysilicon electrode, we showed in vitro repeatable modulation of membrane permeability of two model analytes-methotrexate and quantum dots. Methotrexate is a first-line therapeutic approach for rheumatoid arthritis; quantum dots represent multi-functional nanoparticles with broad applicability from bio-labeling to targeted drug delivery. Importantly, SiC coating demonstrated optimal properties as a gate dielectric, which rendered our membrane relevant for multiple applications beyond drug delivery, such as lab on a chip and micro total analysis systems (µTAS).

Systematic investigation of intracellular trafficking behavior of one-dimensional alumina nanotubes

Nanotube materials exhibit high drug loading capacity and controlled drug release properties, providing new opportunities for drug delivery. However, the intracellular trafficking paths of 1-dimensional (1D) nanostructured materials are poorly understood compared to their spherical counterparts, impeding the broad application of 1D materials as drug carriers. Here, we report the intracellular trafficking mechanism of nontoxic and biocompatible nanomaterials called anodic alumina nanotubes (AANTs), a model for 1D materials with a geometry that can be precisely engineered. The results indicated that AANTs enter the cells mainly by caveolin endocytosis and micropinocytosis and that cells use a novel macropinocytosis-late endosomes (LEs)-lysosomes route to transport AANTs. Moreover, liposomes (marked by DsRed-Rab18) are fully involved in the classical pathway of early endosomes (EEs)/LEs developing into lysosomes. The AANTs were delivered to the cells via two pathways: slow endocytosis recycling and GLUT4 exocytosis vesicles. The AANTs also induced intracellular autophagy and then degraded via the endolysosomal pathway. Blocking endolysosomal pathways using autophagy inhibitors prevented the degradation of AANTs through lysosomes. Our results add new insights into the pathways and mechanisms of intracellular trafficking of AANTs, and suggest that intracellular trafficking and lysosomal degradation are highly interdependent and important for efficient drug delivery, and should be evaluated together for drug carrier development.

New Acylhydrazone Photoswitches with Quantitative Conversion and High Quantum Yield but without Hydrogen Bond Stabilizing ( Z)-Isomer

Hydrazones are recently attracting increasing interest because of their facile synthesis and high addressability, fatigue resistance, and modifiability as molecular switches. However, this new class of switches generally suffers from low conversion from E- to Z-configuration. Here, novel benzoylhydrazones were synthesized by condensation of 2-methoxynaphthaldhyde and benzoylhydrazine. In this hydrazone system, both sides of the imine double bond had large steric hindrance, so that the ( E)-isomer of the benzoylhydrazones was less stable and easily converted into the ( Z)-isomer even without an intramolecular hydrogen bond. Up to 99% conversion efficiency and 89% quantum yield were obtained, in addition to excellent addressability and high fatigue resistance. Outstandingly, the crystal structure of one ( Z)-isomer disclosed no intermolecular hydrogen bonds between the molecules of the ( Z)-isomer but strong and sequential hydrogen bonds between those of the ( E)-isomer. Therefore, the ( E)-isomer was less soluble in solvents than the ( Z)-isomer. This molecular switch system could be easily modified by both hydrophilic pentaethylene glycol chains and hydrophobic octyl chains. Under light irradiation, the resultant amphiphilic acylhydrazone could be transferred from ( E)-isomer to ( Z)-isomer in more than 90% yield even in water after light irradiation. Meanwhile, the self-assembled big nanospheres could rearrange into much smaller vesicles because of the solubility difference of ( Z)- and ( E)-isomers. After the anticancer drug procarbazine was loaded by this kind of acylhydrazone in water, it could be released by light irradiation, showing potential application in photocontrollable drug release.

Direct Imaging of Photoswitching Molecular Conformations Using Individual Metal Atom Markers

Photoswitching behavior of individual organic molecules was imaged by annular dark-field scanning transmission electron microscopy (ADF-STEM) using a highly electron beam transparent graphene support. Photoswitching azobenzene derivatives with ligands at each end containing single transition-metal atoms (Pt) were designed (Pt-complex), and the distance between the strong ADF-STEM contrast from the two Pt atoms in each Pt-complex is used to track molecular length changes. UV irradiation was used to induce photoswitching of the Pt complex on graphene, and we show that the measured Pt-Pt distances within isolated molecules decrease from ∼2.1 nm to ∼1.4 nm, indicative of a trans-to- cis isomerization. Light illumination of the Pt-complex on the graphene support also caused their diffusion out from initial clusters to the surrounding area of graphene, indicating that the light-activated mobilization overcomes the intermolecular van der Waals interactions. This approach shows how individual isolated heavy metal atoms can be included as markers into complex molecules to track their structural changes using ADF-STEM on graphene supports, providing an effective method to study a diverse range of complex organic materials at the single molecule level.

Bidirectional Photomodulation of Surface Tension in Langmuir Films

Switching systems operating in a cooperative manner capable of converting light energy into mechanical motion are of great interest for optical devices, data storage, nanoscale energy converters and molecular sensing. Herein, photoswitchable monolayers were formed at the air-water interface from either a pure bis(thiaxanthylidene)-based photoswitchable amphiphile or from a mixture of the photoswitchable amphiphile with a conventional lipid dipalmitoylphosphatidylcholine (DPPC). Efficient photoisomerization of the anti-folded to syn-folded geometry of the amphiphile's central core induces changes in the surface pressure in either direction, depending on the initial molecular density. Additionally, the switching behavior can be regulated in the presence of DPPC, which influences the packing of the molecules, thereby controlling the transformation upon irradiation. Bis(thiaxanthylidene)-based photoswitchable monolayers provide a promising system to explore cooperativity and amplification of motion.

Smart Gating Multi-Scale Pore/Channel-Based Membranes

Smart gating membranes are important and promising in membrane science and technology. Rapid progress in developing smart membranes is transforming technology in many different fields, from energy and environmental to the life sciences. How a specific smart behavior for controllable gating of porous membranes can be obtained, especially for nano- and micrometer-sized multi-scale pore/channel-based membrane systems is addressed.