Direct Pen Writing of High-Tc, Flexible Magnesium Diboride Superconducting Arrays

Research Progress of FeSe-based Superconductors Containing Ammonia/Organic Molecules Intercalation

As an important part of Fe-based superconductors, FeSe-based superconductors have become a hot field in condensed matter physics. The exploration and preparation of such superconducting materials form the basis of studying their physical properties. With the help of various alkali/alkaline-earth/rare-earth metals, different kinds of ammonia/organic molecules have been intercalated into the FeSe layer to form a large number of FeSe-based superconductors with diverse structures and different layer spacing. Metal cations can effectively provide carriers to the superconducting FeSe layer, thus significantly increasing the superconducting transition temperature. The orientation of organic molecules often plays an important role in structural modification and can be used to fine-tune superconductivity. This review introduces the crystal structures and superconducting properties of several typical FeSe-based superconductors containing ammonia/organic molecules intercalation discovered in recent years, and the effects of FeSe layer spacing and superconducting transition temperature are briefly summarized.

Wafer-Scale Epitaxy of Flexible Nitride Films with Superior Plasmonic and Superconducting Performance

Transition-metal nitrides (e.g., TiN, ZrN, TaN) are incredible materials with excellent complementary metal-oxide semiconductor compatibility and remarkable performance in refractory plasmonics and superconducting quantum electronics. Epitaxial growth of flexible transition-metal nitride films, especially at the wafer scale, is fundamentally important for developing high-performance flexible photonics and superconducting electronics, but the study is rare thus far. This work reports the high-quality epitaxy of 2-in. titanium nitride (TiN) films on flexible fluorophlogopite-mica (F-mica) substrates via reactive magnetron sputtering. Combined measurements of spectroscopic ellipsometry and electrical transport reveal the superior plasmonic and superconducting performance of TiN/F-mica films owing to the high single crystallinity. More interestingly, the superconductivity of these flexible TiN films can be manipulated by the bending states, and enhanced superconducting critical temperature T_C is observed in convex TiN films with in-plane tensile strain. Density functional theory calculations reveal that the strain can tune the electron-phonon interaction strength and the resultant superconductivity of TiN films. This study provides a promising route toward integrating scalable single-crystalline transition-metal nitride films with flexible electronics for high-performance plasmonics and superconducting electronics.

Healable and Foldable Carbon Nanotube/Wax Conductive Composite

In this study, a composite material with healable and foldable features is formulated to print conductive patterns on rough surfaces, such as paper, cloth, and three-dimensional (3D) printed objects. Carbon nanotubes (CNTs) are mixed with wax to formulate a solid composite for pen writing. The composite has a low percolation threshold of 2.5 wt % CNTs and can be written on various rough substrates, such as paper and cloth, to create conductive patterns for electronic conductors. Because of the strong infrared (IR) absorption of CNTs, the printed patterns can be selectively sintered by noncontact IR radiation efficiently to show great electrical conductivity. The electrical resistance of the written patterns on paper also show an insignificant increase after bending, folding, and crumpling. Furthermore, the conductive composite exhibits great healability after destructive damages. The conductivity of the damaged patterns after severe folding or knife cutting recovers to its original value with thermal or IR heating. Several examples, such as conductive tracks on paper, cloth, or 3D printed objects, are also demonstrated to show the potential of this healable conductive composite for electronic applications.

Touching the theoretical capacity: synthesizing cubic LiTi2(PO4)3/C nanocomposites for high-performance lithium-ion battery

A cubic LiTi2(PO4)3/C composite is successfully prepared via a simple solvothermal method and further glucose-pyrolysis treatment. The as-fabricated LTP/C material delivers an ultra-high reversible capacity of 144 mA h g-1 at 0.2C rate, which is the highest ever reported, and shows considerable performance improvement compared with before. Combining this with the stable cycling performance and high rate capability, such material has a promising future in practical application.

Unprecedented sensitivity towards pressure enabled by graphene foam

Reduced graphene oxide foam (RGOF)-based pressure sensors have been fabricated through the combination of ultrasonic dispersion and freeze-drying methods. Due to the maintenance of the highly disordered structure of the ultrasonic dispersed graphene oxides before the freezing process, the RGOF sensors demonstrated an ultra-high sensitivity of 22.8 kPa^-1, an ultra-low detection limit of around 0.1 Pa, and a superior separation of 0.2-Pascal-scale difference.

Size-tunable, highly sensitive microelectrode arrays enabled by polymer pen lithography

By combining polymer pen lithography (PPL) patterning with in situ polymerization, we report a straightforward and bottom-up approach for bench-top fabrication of microelectrode arrays (MEAs) with well-controlled dimensions. The as-fabricated MEAs can be used to electrodeposit prussian blue in situ and work as a biosensor for H₂O₂ with a detection limit as low as 5 nM at a sensitivity of 0.7 A cm^-2 M^-1.

Superconducting Continuous Graphene Fibers via Calcium Intercalation

Superconductors are important materials in the field of low-temperature magnet applications and long-distance electrical power transmission systems. Besides metal-based superconducting materials, carbon-based superconductors have attracted considerable attention in recent years. Up to now, five allotropes of carbon, including diamond, graphite, C₆₀, CNTs, and graphene, have been reported to show superconducting behavior. However, most of the carbon-based superconductors are limited to small size and discontinuous phases, which inevitably hinders further application in macroscopic form. Therefore, it raises a question of whether continuously carbon-based superconducting wires could be accessed, which is of vital importance from viewpoints of fundamental research and practical application. Here, inspired by superconducting graphene, we successfully fabricated flexible graphene-based superconducting fibers via a well-established calcium (Ca) intercalation strategy. The resultant Ca-intercalated graphene fiber (Ca-GF) shows a superconducting transition at ∼11 K, which is almost 2 orders of magnitude higher than that of early reported alkali metal intercalated graphite and comparable to that of commercial superconducting NbTi wire. The combination of lightness and easy scalability makes Ca-GF highly promising as a lightweight superconducting wire.

Direct Pen Writing of Adhesive Particle-Free Ultrahigh Silver Salt-Loaded Composite Ink for Stretchable Circuits

In this article, we describe a writable particle-free ink for fast fabrication of highly conductive stretchable circuits. The composite ink mainly consists of soluble silver salt and adhesive rubber. Low toxic ketone was employed as the main solvent. Attributed to ultrahigh solubility of silver salt in short-chain ketone and salt-assisted dissolution of rubber, the ink can be prepared into particle-free transparent solution. As-prepared ink has a good chemical stability and can be directly filled into ballpoint pens and use to write on different substrates to form well adhesive silver salt-based composite written traces as needed. As a result of high silver salt loading, the trace can be converted into highly conductive silver nanoparticle-based composites after in situ reduction. Because of the introduction of adhesive elastomeric rubber, the as-formed conductive composite written trace can not only maintain good adhesion to various substrates but also show good conductivity under various deformations. The conductivity of written traces can be enhanced by repeated writing-reduction cycles. Different patterns can be fabricated by either direct handwriting or hand-copying. As proof-of-concept demonstrations, a typical handwriting heart-like circuit was fabricated to show its capability to work under different deformations, and a pressure-sensitive switch was also manufactured to present pressure-dependent change of resistance.

Atom-Thin SnS2-xSex with Adjustable Compositions by Direct Liquid Exfoliation from Single Crystals

Two-dimensional (2D) chalcogenide materials are fundamentally and technologically fascinating for their suitable band gap energy and carrier type relevant to their adjustable composition, structure, and dimensionality. Here, we demonstrate the exfoliation of single-crystal SnS2-xSex (SSS) with S/Se vacancies into an atom-thin layer by simple sonication in ethanol without additive. The introduction of vacancies at the S/Se site, the conflicting atomic radius of sulfur in selenium layers, and easy incorporation with an ethanol molecule lead to high ion accessibility; therefore, atom-thin SSS flakes can be effectively prepared by exfoliating the single crystal via sonication. The in situ pyrolysis of such materials can further adjust their compositions, representing tunable activation energy, band gap, and also tunable response to analytes of such materials. As the most basic and crucial step of the 2D material field, the successful synthesis of an uncontaminated and atom-thin sample will further push ahead the large-scale applications of 2D materials, including, but not limited to, electronics, sensing, catalysis, and energy storage fields.

Single-crystal-conjugated polymers with extremely high electron sensitivity through template-assisted in situ polymerization

Single-crystal-conjugated polymer (SCCP) arrays are prepared successfully via a simple method, which is a combination of the contact thermochemical reaction and solvent-free in situ polymerization. The dramatic X-ray diffraction and selective-area electron diffraction results show the high crystallinity of the SCCP arrays. These SCCP arrays display unique physical properties and show great potential in flexible electronics.