Construction of Nanowire Heterojunctions: Photonic Function-Oriented Nanoarchitectonics

Visualizing the interfacial-layer-based epitaxial growth process toward organic core-shell architectures

Organic heterostructures (OHTs) with the desired geometry organization on micro/nanoscale have undergone rapid progress in nanoscience and nanotechnology. However, it is a significant challenge to elucidate the epitaxial-growth process for various OHTs composed of organic units with a lattice mismatching ratio of > 3%, which is unimaginable for inorganic heterostructures. Herein, we have demonstrated a vivid visualization of the morphology evolution of epitaxial-growth based on a doped interfacial-layer, which facilitates the comprehensive understanding of the hierarchical self-assembly of core-shell OHT with precise spatial configuration. Significantly, the barcoded OHT with periodic shells obviously illustrate the shell epitaxial-growth from tips to center parts along the seeded rods for forming the core-shell OHT. Furthermore, the diameter, length, and number of periodic shells were modulated by finely tuning the stoichiometric ratio, crystalline time, and temperature, respectively. This epitaxial-growth process could be generalized to organic systems with facile chemical/structural compatibility for forming the desired OHTs.

Photonic double-network hydrogel dressings for antibacterial phototherapy and inflammation regulation in the general management of cutaneous regeneration

The treatment of festering pathogenic bacteria-induced skin wounds with increased inflammation is an ongoing challenge. The traditional antibacterial photothermal therapy always results in localized hyperthermia (over 50 °C), which inevitably delays tissue recovery. To address this serious issue, we devise a novel photonic hydrogel by integrating urchin-like Bi₂S₃ nano-heterojunctions (nano-HJs) into double-network hydrogels for infected skin regeneration. The synergy of NIR-triggered heat and ROS enables the hydrogels to achieve a rapid germicidal efficacy against bacteria within 15 min at mild temperature (below 50 °C). In vitro cell analysis results revealed that the photonic hydrogels exhibit superior cytocompatibility even after NIR illumination. More importantly, an in vivo study demonstrated that the photonic hydrogel dressings have a robust ability of accelerating contagious full-thickness wound regeneration through debriding abscesses, eliminating pathogens, improving collagen deposition, promoting angiogenesis, and adjusting the inflammation state. This photonic hydrogel system provides a general management strategy for the remedy of infectious wounds, where the incorporation of nano-HJs endows the hydrogels with the photodisinfection ability; in addition, the multifunctional hydrogels alleviate the damage from overwhelming heat towards surrounding tissues during phototherapy and steer the inflammation during the process of tissue regeneration. Accordingly, this work highlights the promising application of the photonic hydrogels in conquering refractory pathogen-invaded infection.

Energy Dissipation and Asymmetric Excitation in Hybrid Waveguides for Routing and Coloring

The delivery of optical signals from an external light source to a nanoscale waveguide is highly important for the development of nanophotonic circuits. However, the efficient coupling of external light energy into nanophotonic components is difficult and still remains a challenge. Herein, we use an external silica nanofiber to light up an organic-inorganic hybrid nanowaveguide, namely, a system composed of a polymer filament doped with MoS₂ quantum dots. Nanofiber-excited nanowaveguides in a crossed geometry are found to asymmetrically couple excitation signals along two opposite directions, with different energy dissipation resulting in different colors of the light emitted by MoS₂ quantum dots and collected from the waveguide terminals. Interestingly, rainbow-like light in the hybrid waveguide is achieved by three-in-one mixing of red, green, and blue components. This heterodimensional system of dots in waveguide represents a significant advance toward all-optical routing and full-color display in integrated nanophotonic devices.

Fabrication of the Ni-based composite wires for electrochemical detection of copper(Ⅱ) ions

Copper ions (Cu²⁺) pollution in the water environment poses a great threat to the health function of life-sustaining metabolic activities. However, the current detection methods need relatively expensive instruments, complex operation procedures and long time, so a facile and direct detection method is desired to be developed. In this work, the Ni-based composite wires with p-n junction (the Ni/NiO/ZnO/Chitosan wire) and Schottky junction (the Ni/NiO/Au/Chitosan wire) were fabricated, and the barrier driven electrochemical sensing mechanism was studied. The direct and facile detection of Cu²⁺ was achieved with a wide linear range (0-6000 nM) and a low LOD (0.81 nM). The excellent stability and recovery in real water samples made the Ni-based composite wires a promising candidate for the practical application. The interfacial barriers of semiconductor can be used as a special sensing factor to develop novel sensors.

Nanoarchitectonics beyond Self-Assembly: Challenges to Create Bio-Like Hierarchic Organization

Incorporation of non-equilibrium actions in the sequence of self-assembly processes would be an effective means to establish bio-like high functionality hierarchical assemblies. As a novel methodology beyond self-assembly, nanoarchitectonics, which has as its aim the fabrication of functional materials systems from nanoscopic units through the methodological fusion of nanotechnology with other scientific disciplines including organic synthesis, supramolecular chemistry, microfabrication, and bio-process, has been applied to this strategy. The application of non-equilibrium factors to conventional self-assembly processes is discussed on the basis of examples of directed assembly, Langmuir-Blodgett assembly, and layer-by-layer assembly. In particular, examples of the fabrication of hierarchical functional structures using bio-active components such as proteins or by the combination of bio-components and two-dimensional nanomaterials, are described. Methodologies described in this review article highlight possible approaches using the nanoarchitectonics concept beyond self-assembly for creation of bio-like higher functionalities and hierarchical structural organization.

5,6,12,13-Tetraazaperopyrenes as Unique Photonic and Mechanochromic Fluorophores

5,6,12,13-Tetraazaperopyrenes with different number of tert-butyl groups (c-TAPP-T, c-TAPP-H) were synthesized, via four-fold Bischler-Napieralski cyclization as the key step. As deduced from the single-crystal structures and optical properties, N-doping and substitution type allow for a precise control of intermolecular interactions. Compared to the reported 1,3,8,10-tetraazaperopyrenes, significantly different packing modes were found in 5,6,12,13-tetraazaperopyrenes. Going from c-TAPP-T to c-TAPP-H, two additional tert-butyl groups lead to different preferential growth directions, affording 1D and 2D microcrystals, respectively. Most importantly, both microcrystals exhibit excellent optical waveguide properties with extraordinarily low loss coefficients and unique polarization features. Although c-TAPP-H possesses a rigid and planar core, its crystals display an exceptional mechanochromic fluorescence, which, again, depends on the mode of molecular packing.

One-Dimensional Programmable Polymeric Microfiber Waveguide with Optically Reconfigurable Photonic Functions

Programmable materials and reconfigurable photonic components, which can change their physicochemical properties and functionalities upon external stimuli, are a major topic of interest in modern science. However, most conventional reconfigurable photonic components rely heavily on mechanical deformation, restricting their application. Herein, a novel strategy based on a dynamically tunable fluorescence resonance energy transfer process to design and fabricate programmable fluorescent micropatterns within single polymer microfiber is proposed. A set of reconfigurable photonic components (including optical switchable waveguide systems, photonic analogies of diodes and transistors, as well as one-dimensional (1D) optical encoding) can be achieved within a single polymeric waveguide microfiber straightforwardly, in which such photonic components can be written, erased, and rewritten as 1D binary patterns with tailored external optical stimuli. These results might be of great fundamental value for the rational design of novel reconfigurable photonic devices with numerous potential applications in highly integrated optical communication components and optical computing devices.

Self-assembly as a key player for materials nanoarchitectonics

The development of science and technology of advanced materials using nanoscale units can be conducted by a novel concept involving combination of nanotechnology methodology with various research disciplines, especially supramolecular chemistry. The novel concept is called 'nanoarchitectonics' where self-assembly processes are crucial in many cases involving a wide range of component materials. This review of self-assembly processes re-examines recent progress in materials nanoarchitectonics. It is composed of three main sections: (1) the first short section describes typical examples of self-assembly research to outline the matters discussed in this review; (2) the second section summarizes self-assemblies at interfaces from general viewpoints; and (3) the final section is focused on self-assembly processes at interfaces. The examples presented demonstrate the strikingly wide range of possibilities and future potential of self-assembly processes and their important contribution to materials nanoarchitectonics. The research examples described in this review cover variously structured objects including molecular machines, molecular receptors, molecular pliers, molecular rotors, nanoparticles, nanosheets, nanotubes, nanowires, nanoflakes, nanocubes, nanodisks, nanoring, block copolymers, hyperbranched polymers, supramolecular polymers, supramolecular gels, liquid crystals, Langmuir monolayers, Langmuir-Blodgett films, self-assembled monolayers, thin films, layer-by-layer structures, breath figure motif structures, two-dimensional molecular patterns, fullerene crystals, metal-organic frameworks, coordination polymers, coordination capsules, porous carbon spheres, mesoporous materials, polynuclear catalysts, DNA origamis, transmembrane channels, peptide conjugates, and vesicles, as well as functional materials for sensing, surface-enhanced Raman spectroscopy, photovoltaics, charge transport, excitation energy transfer, light-harvesting, photocatalysts, field effect transistors, logic gates, organic semiconductors, thin-film-based devices, drug delivery, cell culture, supramolecular differentiation, molecular recognition, molecular tuning, and hand-operating (hand-operated) nanotechnology.

Solid surface vs. liquid surface: nanoarchitectonics, molecular machines, and DNA origami

Comparisons of science and technology between these solid and liquid surfaces would be a good navigation for current-to-future developments.

New insights into the electrochemical detection application of p-p junction foam: the effects of the interfacial potential barrier

3D NiO/Co₃O₄ p-p junction foam was fabricated and applied for electrochemical detection of biomarkers. The theoretical model of employing the interfacial potential barrier as an electrochemical tuning factor was explored in depth. The signals of different targets with similar redox properties could be controllably distinguished by depressing or strengthening the potential barrier. The absorbed positively charged molecules would induce negative charges, inciting a decrease of the potential barrier height Φ and resistance, which is an enhanced tuning factor of the electrochemical signal. However, the effects of the absorbed negatively charged molecules went completely in the inverse direction; the resistance increased following by the increased Φ, which is a weakened tuning factor. Furthermore, the optimum adjustive effects of the p-p junction were validated as both the p-type regions are fully exposed. It is a general strategy to solve the difficulty in selective electrochemical detection of an analyte with similar redox properties. The results build a bridge to connect the potential barrier and electrochemical detection.

In Situ Fabrication of Halide Perovskite Nanocrystal-Embedded Polymer Composite Films with Enhanced Photoluminescence for Display Backlights

A simple and versatile in situ fabrication of MAPbX₃ nanocrystal-embedded polymer composite films is developed by controlling the crystallization process from precursor solutions. The composite films exhibit enhanced photoluminescence properties, improved stability, and excellent piezoelectric and mechanical properties. Applications of these composite films as color converters in liquid-crystal-display backlights are demonstrated, showing bright potential in display technology.

Organic Micro/Nanoscale Lasers

Micro/nanoscale lasers that can deliver intense coherent light signals at (sub)wavelength scale have recently captured broad research interest because of their potential applications ranging from on-chip information processing to high-throughput sensing. Organic molecular materials are a promising kind of ideal platform to construct high-performance microlasers, mainly because of their superiority in abundant excited-state processes with large active cross sections for high gain emissions and flexibly assembled structures for high-quality microcavities. In recent years, ever-increasing efforts have been dedicated to developing such organic microlasers toward low threshold, multicolor output, broadband tunability, and easy integration. Therefore, it is increasingly important to summarize this research field and give deep insight into the structure-property relationships of organic microlasers to accelerate the future development. In this Account, we will review the recent advances in organic miniaturized lasers, with an emphasis on tunable laser performances based on the tailorable microcavity structures and controlled excited-state gain processes of organic materials toward integrated photonic applications. Organic π-conjugated molecules with weak intermolecular interactions readily assemble into regular nanostructures that can serve as high-quality optical microcavities for the strong confinement of photons. On the basis of rational material design, a series of optical microcavities with different structures have been controllably synthesized. These microcavity nanostructures can be endowed with effective four-level dynamic gain processes, such as excited-state intramolecular charge transfer, excited-state intramolecular proton transfer, and excimer processes, that exhibit large dipole optical transitions for strongly active gain behaviors. By tailoring these excited-state processes with molecular/crystal engineering and external stimuli, people have effectively modulated the performances of organic micro/nanolasers. Furthermore, by means of controlled assembly and tunable laser performances, efficient outcoupling of microlasers has been successfully achieved in various organic hybrid microstructures, showing considerable potential for the integrated photonic applications. This Account starts by presenting an overview of the research evolution of organic microlasers in terms of microcavity resonators and energy-level gain. Then a series of strategies to tailor the microcavity structures and excited-state dynamics of organic nanomaterials for the modulation of lasing performances are highlighted. In the following part, we introduce the construction and advanced photonic functionalities of organic-microlaser-based hybrid structures and their applications in integrated nanophotonics. Finally, we provide our outlook on the current challenges as well as the future development of organic microlasers. It is anticipated that this Account will provide inspiration for the development of miniaturized lasers with desired performances by tailoring of excited-state processes and microcavity structures toward integrated photonic applications.