Multifunctional Hybrid Porous Micro-/Nanocomposite Materials

Controlled Construction of Surface Hybrid Structures of Zirconium Powder Assisted by Microdroplets and Photopolymerization Collaboration

The controlled construction of hybrid material structures can effectively regulate the physical, chemical, and functional properties of materials. This work explores the feasibility of coupling microdroplets technology and photopolymerization methods to achieve controllable construction of hybrid structures on the surface of ultrafine zirconium (Zr) powder, and investigates the effects of different hybrid structures on the surface mechanical properties, thermal oxidation performance, and electrostatic safety of Zr powder. The photopolymerization reaction process of PMMA on the surface of Zr powder was analyzed, revealing the principle of accelerated photopolymerization reactions within microdroplets, which was experimentally validated. Furthermore, by altering the polymerization reaction conditions and with the assistance of hydrofluoric acid (HF), a mechanism for controlling the hybrid structures on the surface of Zr powder was proposed. The results demonstrated that the collaborative effect of microdroplets and photopolymerization methods efficiently controlled the content and structural characteristics of the PMMA coating on the surface of Zr powder. The further introduction of HF was found to adjust the morphology of the surface hybrid structures and significantly improve the thermal oxidation performance and electrostatic safety of the Zr powder. These findings provided insights into the surface property regulation of active energetic materials and paved the way for the controlled preparation of inorganic-organic hybrid materials.

Antigravity Autonomous Superwettable Pumps for Spontaneous Separation of Oil-Water Emulsions

Oil-water separation based on superwettable materials offers a promising way for the treatment of oil-water mixtures and emulsions. Nevertheless, such separation techniques often require complex devices and external energy input. Therefore, it remains a great challenge to separate oil-water mixtures and emulsions through an energy-efficient, economical, and sustainable way. Here, a novel approach demonstrating the successful separation of oil-water emulsions using antigravity-driven autonomous superwettable pumps is presented. By transitioning from traditional gravity-driven to antigravity-driven separation, the study showcases the unprecedented success in purifying oil/water from emulsions by capillary/siphon-driven superwettable autonomous pumps. These pumps, composed of self-organized interconnected channels formed by the packing of superhydrophobic and superhydrophilic sand particles, exhibit outstanding separation flux, efficiency, and recyclability. The findings of this study not only open up a new avenue for oil-water emulsion separation but also hold promise for profound impacts in the field.

Unique Fluorescence of Aggregation-Induced Emission Luminogens on Solid Surfaces Modified by Silicone Nanofilaments

Aggregation-induced emission (AIE) has revolutionized solid-state fluorescence by overcoming the limitations of aggregation-caused quenching. While extensively studied in solutions, AIE's potential on solid surfaces remains largely unexplored, which can be fundamentally interesting and practically useful. In this work, we demonstrate the successful dispersion of tetraphenylethylene (TPE), one of the most classical AIE luminogens, on solid surfaces coated with silicone nanofilaments (SNF). The high surface area of SNF enables the uniform immobilization of TPE luminogens, replicating their dispersal behavior in solutions. Compared to unmodified surfaces, TPE dispersed on SNF-coated surfaces exhibits significantly enhanced fluorescence intensity. Moreover, a fascinating dynamic blue shift in TPE emission on SNF-coated surfaces is observed, with the velocity controllable by the surface group of SNF by up to 4 orders of magnitude, showing that TPE can be applied to the judgment of the nanoscale morphology and surface free energy of the solid surface. Owing to the superhydrophobicity and self-cleaning properties of SNF, the on-surface fluorescence can be sustained underwater and is resistant to dust contamination and rain erosion, with potential applications of information encryption presented. Our approach of uniformly dispersing AIE luminogens on nanomaterials with high surface areas provides a general methodology for creating on-surface fluorescence and saving the usage of expensive AIE luminogens in applications.

An Eco-Friendly Manner to Prepare Superwetting Melamine Sponges with Switchable Wettability for the Separation of Oil/Water Mixtures and Emulsions

Oil/water separation processes have garnered significant global attention due to the quick growth in industrial development, recurring chemical leakages, and oil spills. Hence, there is a significant demand for the development of inexpensive superwetting materials in an eco-friendly manner to separate oil/water mixtures and emulsions. In this study, a superwetting melamine sponge (SMS) with switchable wettabilities was prepared by modifying melamine sponge (MS) with sodium dodecanoate. The as-prepared SMS exhibited superhydrophobicity, superoleophilicity, underwater superoleophobicity, and underoil superhydrophobicity. The SMS can be utilized in treating both light and heavy oil/water mixtures through the prewetting process. It demonstrated fast permeation fluxes (reaching 108,600 L m-2 h-1 for a light oil/water mixture and 147,700 L m-2 h-1 for a heavy oil/water mixture) and exhibited good separation efficiency (exceeding 99.56%). The compressed SMS was employed in separating surfactant-stabilized water-in-oil emulsions (SWOEs), as well as surfactant-stabilized oil-in-water emulsions (SOWEs), giving high permeation fluxes (reaching 7210 and 5054 L m-2 h-1, respectively). The oil purity for SWOEs' filtrates surpassed 99.98 wt% and the separation efficiencies of SOWEs exceeded 98.84%. Owing to their remarkable capability for separating oil/water mixtures and emulsions, eco-friendly fabrication method, and feasibility for large-scale production, our SMS has a promising potential for practical applications.

A Gemini-Type Superwettable Separator for Consecutive Purification of Water and Oil Phases from Oil-Water Mixtures and Emulsions

Oil pollution results from daily activities and a variety of industries have caused not only severe environmental problems but also wastage of valuable petrochemical resources. Separation based on superwettable materials holds promise; however, practical applications of a single type of superwettable materials were often limited due to their ability in treatment of complicated oil-water systems. Herein, a Gemini-type separator was created through the cooperation of two kinds of superwettable sand particles with opposite wettability, i. e., one is superhydrophobic whereas the other is superhydrophilic. Cooperatively by the two types of superwettable sand, consecutive separation and purification of both water and oil phases from complicated oil-water systems (e. g., water mixed with a lighter or denser oil, water emulsified in oil, oil emulsified in water, and/or a combination of them in one batch) could be achieved with high flux and superior efficiency just in one single operation unit.

Droplet Size-Assisted Polysiloxane Architecting

(Super)antiwetting shielding around engineering materials and protecting them against harsh environmental conditions have been achieved via growing various geometry polysiloxane (or silicone) patterns around them by using a droplet-assisted growth method, where the polymerization takes place inside of the water droplets acting as reaction vessels. The size and distribution of these reaction vessels are the main factors in making different geometry silicone patterns; however, very little is known about the fate of these droplets throughout the polymerization. Here, we propose keeping the relative humidity (% RH) inside the reactor stable throughout the polymerization as a new coating parameter to force the size of the reaction vessel water droplets to be the same for building simply shaped silicone rods with controlled geometry and distribution. In this manner, we grew simple geometry cylindric microrods on surfaces and could tune their length, diameter, inter-rod spacing, and thus the (super)hydrophobicity. Here, we also demonstrate that with changes in the amplitude and stability of the % RH, it is possible to fabricate different (super)hydrophobic nanograsses, conical silicone microrods, and isotropic silicone nanofilaments. The proposed new way of tuning initial and in situ reaction vessel droplet size can be used as a single factor to formulate different geometry silicone patterns with tunable dimensions, leading to different roughness and hydrophobicity. To a certain extent, the droplet size-assisted silicone shaping in this work provides a new way to control the length, diameter, morphology, inter-rod spacing, and thus the (super)hydrophobicity of the silicone patterns, especially those in the shape of simple cylindrical microrods. This control over silicone architecting will help to prepare new (super)hydrophobic coatings with more controlled morphology and thus wettability; on the contrary, it will support surface scientists modeling the connection between surface geometry and (super)antiwetting of such irregular pillared surfaces that remain elusive.

Silicone Nanofilament Coatings as Flexible Catalyst Supports for a Knoevenagel Condensation Reaction in Batch and Flow Systems

In this work, silicone nanofilament (SNF) coatings were prepared via a droplet-assisted growth and shaping (DAGS) approach, where the preparation of the coatings is allowed under ambient conditions. The application of SNF coatings as catalyst supports for amino moieties from (3-aminopropyl)triethoxysilane (APTES) was investigated. With the optimized coating conditions identified, the Brunauer-Emmett-Teller surface areas of a bare glass filter substrate and bare glass beads after the coating have increased by 5-fold and 16-fold, respectively. The SNF-coated filters were readily functionalized with amino groups via a liquid-phase deposition process, and their catalytic activities for a Knoevenagel reaction were evaluated using a batch reactor and a packed bed reactor. In both reactors, the as-prepared filters demonstrated superior catalytic performance over the functionalized filters without SNF coatings. Notably, the unique flexibility of the SNF coatings allowed the facile preparation of a packed bed reactor and a scalable catalytic system. It is expected that the packed bed system established in this study will support the development and the use of various SNF-supported organocatalysts and catalytic materials.

Emerging single-atom iron catalysts for advanced catalytic systems

Due to the elusive structure-function relationship, traditional nanocatalysts always yield limited catalytic activity and selectivity, making them practically difficult to replace natural enzymes in wide industrial and biomedical applications. Accordingly, single-atom catalysts (SACs), defined as catalysts containing atomically dispersed active sites on a support material, strikingly show the highest atomic utilization and drastically boosted catalytic performances to functionally mimic or even outperform natural enzymes. The molecular characteristics of SACs (e.g., unique metal-support interactions and precisely located metal sites), especially single-atom iron catalysts (Fe-SACs) that have a similar catalytic structure to the catalytically active center of metalloprotease, enable the accurate identification of active centers in catalytic reactions, which afford ample opportunity for unraveling the structure-function relationship of Fe-SACs. In this review, we present an overview of the recent advances of support materials for anchoring an atomic dispersion of Fe. Subsequently, we highlight the structural designability of support materials as two sides of the same coin. Moreover, the applications described herein illustrate the utility of Fe-SACs in a broad scope of industrially and biologically important reactions. Finally, we present an outlook of the major challenges and opportunities remaining for the successful combination of single Fe atoms and catalysts.

Sand-Based Economical Micro/Nanocomposite Materials for Diverse Applications

Sand is one of the most fundamental construction materials that is of significant importance and widely used for making concrete, plasters, and mortars, and also for filling under floor and basements. Sand-derived functional materials, for instance superhydrophobic sand, which can be used to prepare liquid marble, separate oil-water mixtures, and transport liquids, have recently been a highly topical and promising research field. However, such materials are mainly prepared using valuable surface modification agents via complicated procedures that are difficult for mass-production, which restricted their true applications. Here, we developed a simple, low-cost, and efficient method for the development of sand-based hierarchical micro/nanostructured composite materials with diverse applications. Briefly, micro/nanostructured superhydrophobic sand was synthesized by one-step in situ growth of a network layer of silicone nanofilaments on the surface of sand microparticles, using only one cheap chemical of small molecules of silanes. The as-prepared superhydrophobic sand displays excellent performance in waterproofing, water storage, soil moisturizing, and oil-water separation. Furthermore, sand-supported micro/nanocomposite catalysts were obtained through covalent attachment of polyamines on the surface of silicone nanofilaments. Such composites, packed in a glass column, were used as a simple flow reactor for Knoevenagel condensation reactions. Quantitative amounts of pure products without further purification can be obtained in such a simple way that just allowing the reactants solution flows through the composite catalysts driven by gravity. These results pave the way toward the development of sand-based multifunctional materials with great potential for industrial use, given their versatile functions and excellent performances but easy-to-fabricate, low-cost preparation procedure.

Nanomotor-Derived Porous Biomedical Particles from Droplet Microfluidics

Porous particles have found widespread applications in therapeutic diagnosis, drug delivery, and tissue engineering due to their typical properties of large surface area, extensive loading capacity, and hierarchical microstructures. Attempts in this aspect are focusing on the development of effective methods to generate functional porous particles. Herein, a simple droplet microfluidics for continuously and directly generating porous particles by introducing bubble-propelled nanomotors into the system is presented. As the nanomotors can continuously generate gas bubbles in the unsolidified droplet templates, the desirable porous microparticles can be obtained after droplet polymerization. It is demonstrated that the generation process is highly controlled and the resultant microparticles show excellent porosity and monodispersity. In addition, the obtained porous microparticles can serve as microcarriers for 3D cell culture, because of their characteristic porous structures and favorable biocompatibility. Moreover, owing to the existence of oxygen in these microparticles, they can be used to improve the healing effects of wounds in the type I diabetes rat models. These remarkable features of the generation strategy and the porous microparticles point to their potential values in various biomedical fields.

Room-temperature fabrication of superhydrophobic covalent organic framework (COF) decorated cotton fabric for high-flux water-in-oil emulsion separation

We report the preparation of a two-dimensional superhydrophobic covalent organic framework (COF)-coated cotton fabric via a rapid one-step method at room temperature. The COF-coated fabric was found to have stable superhydrophobicity and remarkable water-in-oil emulsion separation capacity with ultra-high flux under only gravity.

A facile and green route to fabricate fiber-reinforced membrane for removing oil from water and extracting water under slick oil

Except the good separation performance, the membranes used for oil-water mixture separation should be fabricated with as little wastewater produced as possible. Thus, we proposed a green tactic--water vapor induced phase inversion to prepare the high-strength and superhydrophilic/underwater superoleophobic nonwoven fabric-based cotton/PA6/PAN membranes which is based on the polymer/solvent/nonsolvent ternary system analysis. Differing from adding additives in polymer solution or coagulation bath, above proposed strategy has an "subtractive effect" with the advantages of constructing three-dimensional porous structure and greatly reducing the organic wastewater produced during preparation process. Moreover, the obtained cotton/PA6/PAN membranes exhibited unexpected performances for separating oil-in-water emulsions. An ultrahigh permeation flux of up to 478,000 L m^-2 h^-1 bar^-1 with a separation efficiency of > 99.9% was obtained under the driving pressure of 1.6 KPa, which was one order of magnitude higher than the conventional separation membranes with similar properties. In addition, it is surprising that the cotton/PA6/PAN membranes can also extract water from the slick oil/water immiscible mixture. Therefore, it is expected that the cotton/PA6/PAN membranes can be used in practical oily wastewater purification.

Silicone Nanofilament Support Layers in an Open-Channel System for the Fast Reduction of Para-Nitrophenol

Chemical vapor phase deposition was used to create hydrophobic nanostructured surfaces on glass slides. Subsequently, hydrophilic channels were created by sputtering a metal catalyst on the channels while masking the outside. The surface tension gradient between the hydrophilic surface in the channels and the outside hydrophobicity formed the open-channel system. The reduction of para-nitrophenol (PNP) was studied on these devices. When compared to nanostructure-free reference systems, the created nanostructures, namely, silicone nanofilaments (SNFs) and nano-bagels, had superior catalytic performance (73% and 66% conversion to 55% at 0.5 µL/s flow rate using 20 nm platinum) and wall integrity; therefore, they could be readily used multiple times. The created nanostructures were stable under the reaction conditions, as observed with scanning electron microscopy. Transition electron microscopy studies of platinum-modified SNFs revealed that the catalyst is present as nanoparticles ranging up to 13 nm in size. By changing the target in the sputter coating unit, molybdenum, gold, nickel and copper were evaluated for their catalytic efficiency. The relative order was platinum < gold = molybdenum < nickel < copper. The decomposition of sodium borohydride (NaBH₄) by platinum as a concurrent reaction to the para-nitrophenol reduction terminates the reaction before completion, despite a large excess of reducing agent. Gold had the same catalytic rate as molybdenum, while nickel was two times and copper about four times faster than gold. In all cases, there was a clear improvement in catalysis of silicone nanofilaments compared to a flat reference system.

Multifunctional membranes with super-wetting characteristics for oil-water separation and removal of hazardous environmental pollutants from water: A review

Over the past few years, oil-water separation techniques have been widely researched due to influences of oil pollution. The oil pollution is significantly increasing day-by-day because of ever-increasing usage of oil in daily routine of humans and industrial activities. The separation of water from oil-water emulsions/mixtures through membrane technology has provided absolute necessary qualities such as low cost, eco-friendly, easy-operation and energy efficient. To build up the filter membranes with special super-wettability properties and bearing excellent multifunctional applications is highly attractive research area in current decade. However, evolution of membrane technology suffered many deficiencies including severe fouling, short-standing against high flow speed, surface wettability disorders, non-reusable and limited application. In this review article, we outline the recent advances in membrane technology with respect to special super-wettability properties, enhanced characteristics for purpose to serve oil-water separation, and more specifically its multifunctional applications. Therefore, this study is made for membranes having other than applications, in addition to oil-water separation. Further, the wetting phenomenon of these multifunctional membranes is addressed and highlighted the brief overview of surface wetting types including Superhydrophobic-Superoleophilic membranes, Superhydrophilic-Superoleophobic membranes, and Superhydrophilic-underwater Superoleophobic membranes. Moreover, relative fabrication procedures and multifunctional applications of developed multifunctional super-wetting membranes are also discussed along with wetting behavior. Finally, the current developments and achievements for oil-water separation multifunctional super-wetting membranes are concluded. Besides, it also explores the future challenges and obstacles associated to these membranes. Hence, this article provides brief overview of advancement of oil-water separation based multifunctional super-wetting membranes and ended with new thoughts of further modification/enhancement.

3D Graphene-Based Macrostructures for Water Treatment

Recently, 3D graphene-based macrostructures (3D GBMs) have gained increased attention due to their immense application potential in water treatment. The unique structural features (e.g., large surface area and physically interconnected porous network) as well as fascinating properties (e.g., high electrical conductivity, excellent chemical/thermal stability, ultralightness, and high solar-to-thermal conversion efficiency) render 3D GBMs as promising materials for water purification through adsorption, capacitive deionization, and solar distillation. Moreover, 3D GBMs can serve as scaffolds to immobilize powder nanomaterials to build monolithic adsorbents and photo-/electrocatalysts, which significantly broadens their potential applications in water treatment. Here, recent advances in their synthesis and application toward water purification are highlighted. Remaining challenges and future perspectives are elaborated to highlight future research directions.

Polysilsesquioxane Nanowire Networks as an "Artificial Solvent" for Reversible Operation of Photochromic Molecules

Efficient isomerization of photochromic molecules often requires conformational freedom and is typically not available under solvent-free conditions. Here, we report a general methodology allowing for reversible switching of such molecules on the surfaces of solid materials. Our method is based on dispersing photochromic compounds within polysilsesquioxane nanowire networks (PNNs), which can be fabricated as transparent, highly porous, micrometer-thick layers on various substrates. We found that azobenzene switching within the PNNs proceeded unusually fast compared with the same molecules in liquid solvents. Efficient isomerization of another photochromic system, spiropyran, from a colorless to a colored form was used to create reversible images in PNN-coated glass. The coloration reaction could be induced with sunlight and is of interest for developing "smart" windows.

Hierarchical Structured Multifunctional Self-Cleaning Material with Durable Superhydrophobicity and Photocatalytic Functionalities

Self-cleaning materials, which are inspired and derived from natural phenomena, have gained significant scientific and commercial interest in the past decades as they are energy- and labor-saving and environmentally friendly. Several technologies are developed to obtain self-cleaning materials. The combination of superhydrophobic and photocatalytic properties enables the efficient removal of solid particles and organic contaminations, which could reduce or damage the superhydrophobicity. However, the fragility of the nanoscale roughness of the superhydrophobic surface limits its practical application. Here, a hierarchical structure approach combining micro- and nanoscale architectures is created to protect the nanoscale surface roughness from mechanical damage. Glass beads of 75 µm are partially embedded into a low-density polyethylene film. This composite surface is coated with silicone nanofilaments (SNFs) via the droplet-assisted growth and shaping approach, providing the nanoscale surface roughness as well as the support for the photocatalyst with enlarged surface area. TiO₂ nanoparticles, which serve as the photocatalyst, are synthesized in situ on SNFs through a hydrothermal reaction. The self-cleaning effect is proved using wettability measurements for various liquids, degradation of organic contamination under UV light, and antibacterial tests. The enhanced mechanical durability of the hierarchical structure of the composite material is verified with an abrasion test.

A SuperLEphilic/Superhydrophobic and Thermostable Separator Based on Silicone Nanofilaments for Li Metal Batteries

Conventional polyolefin separators suffer from poor wettability to liquid electrolytes (LEs). Although some modified separators exhibit improved wettability, they are hydrophilic, causing inevitable moisture uptake. Trace water could result in poor performance and safety hazard of Li metal batteries. Here, we report a design idea of superLEphilic/superhydrophobic and thermostable separators by modifying the Celgard separator using silicone nanofilaments. The separator features low moisture uptake (∼0%), fast LE diffusion (454 ms), and high LE uptake (287.8%), LE retention rate, and Li⁺ conductivity. Consequently, the Li/LiFePO₄ cells show high cycling stability (96.05% after 350 cycles), good rate performance (125 mA h g⁻¹ at 5.0 C), low resistance, and stable open circuit voltage at 160°C. Moreover, the separator could improve performance of the other Li metal batteries with high-voltage cathodes and the LiFePO₄/graphite pouch cells. This work provides an avenue for designing advanced separators by using bioinspired superwetting surfaces.

•

A superLEphilic/superhydrophobic separator is first reported for Li metal batteries

•

The separator has low moisture uptake and could improve performance of Li/Li cells

•

The separator features fast LE diffusion, high LE uptake, and Li⁺ conductivity

•

The separator could enhance performance of high-voltage Li metal batteries

Continuous in Situ Extraction toward Multiphase Complex Systems Based on Superwettable Membrane with Micro-/Nanostructures

Liquid-phase extraction is widely used in the chemical industry. Traditional extracting routes always involve multiple procedures, need a large floor space, and have long operating time. "Continuous in situ extraction" that can conduct a real-time integration of solutes extraction and solvents separation simultaneously would be of great significance. Superwettable materials offer us a good choice to separate different immiscible solvents; herein, we achieve continuous in situ extraction of multiphase complex systems by using a porous polytetrafluoroethylene membrane with nanostructure-induced superwettability. It realizes a rapid, selective, and efficient real-time removal of various extracting agents during a continuous process due to their wetting differences. Compared with traditional extraction, our route shows a distinct superiority on saving operating time, enhancing liquid recovery, and simplifying procedures, while still retaining high extracting performance. In addition, our membrane possesses excellent durability even after long-term work in harsh chemical environments or under strong mechanical impacts. Thus, we believe that it will provide a potential alternative for current industrial extractions.

Janus Membranes with Charged Carbon Nanotube Coatings for Deemulsification and Separation of Oil-in-Water Emulsions

Oil/water separation, especially for those surfactant-stabilized oil-in-water (O/W) emulsions, is required to protect our ecological environment from destruction. Janus membranes with a function of deemulsification appear as a kind of efficient materials for the separation of O/W emulsions because of a precise adjustment of the surface nature for the hydrophilic and hydrophobic layers. However, existing strategies of membrane preparation suffer from complicated multisteps, leading to uncontrolled thickness of the hydrophilic deemulsification layer. Herein, we present a facile and tunable method to prepare a series of Janus membranes consisting of negatively or positively charged carbon nanotubes (CNTs) and hydrophobic microfiltration membranes by vacuum filtration. The thickness of the hydrophilic CNT coating is thus well-controlled by engineering the amount of CNTs deposited on the substrate membrane. The prepared Janus membranes are effective for the separation of both heavy oil and light oil from O/W emulsions through deemulsification owing to the charge-screening effect. It is very interesting that those membranes displaying a combination of water contact angle and underwater oil contact angle both above 90° have a unique oil delivery behavior and thus high separation performance of oil from O/W emulsions. Such Janus membranes can retrieve 89% of oil in 40 min from the 1,2-dichloroethane/water emulsions with the droplet size of 19 μm. This easy-to-prepare and easy-to-tune strategy provides feasibilities for practical applications of Janus membranes to the deemulsification and separation of O/W emulsions.

Solution-processable, durable, scalable, fluorine-grafted graphene-based superhydrophobic coating for highly efficient oil/water separation under harsh environment

The coating composed of f-rGO and OPBA as molecular glue can densely adhere on the surface of various commercial materials.

Under-oil superhydrophilic wetted PVDF electrospun modified membrane for continuous gravitational oil/water separation with outstanding flux

Water in the world is becoming an increasingly scarce commodity and the membrane technology is a most effective strategy to address this issue. However, the fouling and low flux of the polymeric membrane remains the big challenges. Novel modified Polyvinylidene fluoride (PVDF) membrane was introduced, in this work, using a novel treatment technique for an electrospun polymeric PVDF membrane to be used in oil/water separation systems. The Characterizations of the modified and pristine membranes showed distinct changes in the phase and crystal structure of the membrane material as well as the wettability. The modification process altered the surface morphology and structure of the membrane by forming hydrophilic microspheres on the membrane surface. Therefore, the proposed treatment converts the membrane from highly hydrophobic to be a superhydrophilic under-oil when wetted with water. Accordingly, in the separation of oil/water mixtures, the modified membrane can achieve an outstanding flux of 20664 L/m². hr under gravity, which is higher than the pristine membrane by infinite times. Moreover, in the separation of the emulsion, a high flux of 2727 L/m². h was achieved. The results exhibited that the modified membrane can treat a huge amount of oily water with a minimal energy consumption. The corresponding separation efficiencies of both of oil/water mixtures and emulsion are more than 99%. The achieved characteristics for the modified and pristine membranes could be exploited to design a novel continuous system for oil/water separation with an excellent efficiency.

Preparation of Superwetting Porous Materials for Ultrafast Separation of Water-in-Oil Emulsions

Functional materials with a superwetting surface property have been extensively explored to achieve emulsion separation. In this paper, we report a simple and inexpensive method for fabricating superhydrophobic/superoleophilic porous materials from polymeric sponges. These microstructured porous materials, which do not contain any fluorinated compounds, maintain their superhydrophobicity and superoleophilicity after long-term organic solvent immersion and display environmental stability. These superhydrophobic porous materials can effectively separate a wide range of water-in-oil emulsions including surfactant-free and surfactant-stabilized water-in-oil emulsions with high efficiency (>99.98%) and high flux (up to 155 000 L m^-2 h^-1 bar^-1). Meanwhile, these materials exhibited excellent pH resistance and antifouling properties. The high performance of our superhydrophobic porous materials and their efficient, low-energy, cost-effective preparation suggest that they have a great potential for practical applications.

Moldable clay-like unit for synthesis of highly elastic polydimethylsiloxane sponge with nanofiller modification

A clay-like unit is beneficial for the moldable synthesis of a superelastic polydimethylsiloxane sponge with nanofiller modification via an ultrasound-assisted in situ polymerization approach.