Stimuli-Responsive Free-Standing Layer-By-Layer Films

pH-responsive membranes: Mechanisms, fabrications, and applications

Understanding the mechanisms of pH-responsiveness allows researchers to design and fabricate membranes with specific functionalities for various applications. The pH-responsive membranes (PRMs) are particular categories of membranes that have an amazing aptitude to change their properties such as permeability, selectivity and surface charge in response to changes in pH levels. This review provides a brief introduction to mechanisms of pH-responsiveness in polymers and categorizes the applied polymers and functional groups. After that, different techniques for fabricating pH-responsive membranes such as grafting, the blending of pH-responsive polymers/microgels/nanomaterials, novel polymers and graphene-layered PRMs are discussed. The application of PRMs in different processes such as filtration membranes, reverse osmosis, drug delivery, gas separation, pervaporation and self-cleaning/antifouling properties with perspective to the challenges and future progress are reviewed. Lastly, the development and limitations of PRM fabrications and applications are compared to provide inclusive information for the advancement of next-generation PRMs with improved separation and filtration performance.

A mini-review on bio-inspired polymer self-assembly: single-component and interactive polymer systems

Biology demonstrates meticulous ways to control biomaterials self-assemble into ordered and disordered structures to carry out necessary bioprocesses. Empowering the synthetic polymers to self-assemble like biomaterials is a hallmark of polymer physics studies. Unlike protein engineering, polymer science demystifies self-assembly by purposely embedding particular functional groups into the backbone of the polymer while isolating others. The polymer field has now entered an era of advancing materials design by mimicking nature to a very large extend. For example, we can make sequence-specific polymers to study highly ordered mesostructures similar to studying proteins, and use charged polymers to study liquid-liquid phase separation as in membraneless organelles. This mini-review summarizes recent advances in studying self-assembly using bio-inspired strategies on single-component and multi-component systems. Sequence-defined techniques are used to make on-demand hybrid materials to isolate the effects of chirality and chemistry in synthetic block copolymer self-assembly. In the meantime, sequence patterning leads to more hierarchical assemblies comprised of only hydrophobic and hydrophilic comonomers. The second half of the review discusses complex coacervates formed as a result of the associative charge interactions of oppositely charged polyelectrolytes. The tunable phase behavior and viscoelasticity are unique in studying liquid macrophase separation because the slow polymer relaxation comes primarily from charge interactions. Studies of bio-inspired polymer self-assembly significantly impact how we optimize user-defined materials on a molecular level.

Stimuli-responsive temporary adhesives: enabling debonding on demand through strategic molecular design

Stimuli-responsive temporary adhesives constitute a rapidly developing class of materials defined by the modulation of adhesion upon exposure to an external stimulus or stimuli. Engineering these materials to shift between two characteristic properties, strong adhesion and facile debonding, can be achieved through design strategies that target molecular functionalities. This perspective reviews the recent design and development of these materials, with a focus on the different stimuli that may initiate debonding. These stimuli include UV light, thermal energy, chemical triggers, and other potential triggers, such as mechanical force, sublimation, electromagnetism. The conclusion discusses the fundamental value of systematic investigations of the structure-property relationships within these materials and opportunities for unlocking novel functionalities in future versions of adhesives.

Ratiometric Fluorescent Mapping of pH and Glutathione Dictates Intracellular Transport Pathways of Micellar Nanoparticles

Visualization of intracellular transport pathways is crucial to investigate the internalization mechanism and understand the intracellular behavior of nanomaterials. Herein, we rationalized the design of micellar nanoparticles (NPs) for ratiometric fluorescent mapping of intracellular pH and glutathione (GSH), two essential parameters for maintaining normal cellular functions. Specifically, pH-sensitive naphthalimide-based probe (NPI) and pH-inert rhodamine B (RhB) were covalently labeled to double hydrophilic block copolymers (DHBCs) using the thiolactone chemistry, enabling the covalent attachment of NPI and RhB to one molecule with a redox-responsive disulfide linkage. The dually labeled DHBCs exhibited blue/orange dual emissions in acidic pH, which was further converted into green/orange dual emissions in neutral pH because of the deprotonation of NPI moieties and the sole green emission in the presence of GSH at neutral pH because of the decreased Förster resonance energy transfer efficiency between an NPI donor and an RhB acceptor as a result of GSH-mediated cleavage of disulfide bonds. These remarkable ratiometric fluorescence changes allowed for not only the simultaneous mapping of the intracellular pH and GSH but also the intracellular transport pathways of internalized NPs.

Combining Top-Down and Bottom-Up with Photodegradable Layer-by-Layer Films

Layer-by-layer (LbL) self-assembly of polymer coatings is a bottom-up fabrication technique with broad applicability across a wide range of materials and applications that require control over interfacial properties. While most LbL coatings are chemically uniform in directions both tangent and perpendicular to their substrate, control over the properties of surface coatings as a function of space can enhance their function. To contribute to this rapidly advancing field, our group has focused on the top-down spatiotemporal control possible with photochemically reactive LbL coatings, harnessed through charge-shifting polyelectrolytes enabled by photocleavable ester pendants. The photolysis of the photocleavable esters degrades LbL films containing these polyelectrolytes. The chemical structures of the photocleavable groups dictate the wavelengths responsible for disrupting these coatings, ranging from ultraviolet to near-infrared in our work. In addition, spatially segregating reactive groups into "compartments" within LbL films has enabled us to fabricate reactive free-standing polymer films and multiheight photopatterned coatings. Overall, by combining bottom-up and top-down approaches, photoreactive LbL films enable precise control over the interfacial properties of polymer and composite coatings.

A Biocompatible Multilayer Film from an Asymmetric Picolinium-Containing Polycation with Fast Visible-Light/NIR-Degradability

Finely tuning the photodegradation behavior of the layer-by-layer (LbL) film from the view of controlling the chemical structure of the film-building polymer is still a challenge in related fields. To meet this requirement, a photodegradable polymer (P1) is rationally designed for assembling a visible-light-degradable multilayer film with polystyrene sulfonate (PSS). Compared with similar photopolymers (P2 and P3), this asymmetric picolinium-containing polymer can significantly enhance the degradation rate of as-prepared LbL films; under the same degradation condition, the degradation rate of (P1/PSS)10 is 3 and 6.6 times that of (P2/PSS)10 and (P3/PSS)10, respectively. Moreover, near-infrared light (NIR) is available for triggering the degradation of this film with the assistance of upconversion nanoparticles of YbTm@Lu. The cell cytotoxicity and cell proliferation experiments reveal that P1 is nontoxic and favorable for cell proliferation at concentrations of up to 500 μg mL^-1 . As for (PSS/P1)10 films, the ratio of cell number of these two samples ((PSS/P1)10 modified: photodegraded) increases dramatically and reaches about 1.67:1 after 72 h incubation. On the basis of these results, it is anticipated that P1 and this LbL film is an exceptional candidate for visible-light/NIR degradable materials in materials and biological science, medicine, and optics.

Functional Surfaces through Controlled Assemblies of Upper Critical Solution Temperature Block and Star Copolymers

Endowing surfaces with multiple advanced functionalities, such as temperature-controlled swelling or the triggered release of functional small molecules, is attractive for a large variety of applications ranging from smart textiles to advanced biomedical applications. This Invited Feature Article summarizes recent advances in the development of upper critical solution temperature (UCST) behavior of copolymers in aqueous solutions and compares the fundamental differences between lower critical solution temperature (LCST) and UCST transitions. The effect of polymer chemistry and architecture on UCST transitions is discussed for block copolymer micelles (BCMs) and star polymers in solution and assembled at surfaces. The inclusion of such nanocontainers (i.e., BCMs and star polymers) in layer-by-layer (LbL) coatings and how to control their responsive behavior through deposition conditions and binding partners is explored. Finally, the inclusion and temperature-triggered release of functional small molecules is explored for nanocontainers in LbL coatings. Taken together, UCST nanocontainers containing LbL films are promising building blocks for the development of new generations of practical, functional surface coatings.

Programmable multi-DNA release from multilayered polyelectrolytes using gigahertz nano-electromechanical resonator

BACKGROUND

Controllable and multiple DNA release is critical in modern gene-based therapies. Current approaches require complex assistant molecules for combined release. To overcome the restrictions on the materials and environment, a novel and versatile DNA release method using a nano-electromechanical (NEMS) hypersonic resonator of gigahertz (GHz) frequency is developed.

RESULTS

The micro-vortexes excited by ultra-high frequency acoustic wave can generate tunable shear stress at solid-liquid interface, thereby disrupting molecular interactions in immobilized multilayered polyelectrolyte thin films and releasing embedded DNA strands in a controlled fashion. Both finite element model analysis and experiment results verify the feasibility of this method. The release rate and released amount are confirmed to be well tuned. Owing to the different forces generated at different depth of the films, release of two types of DNA molecules with different velocities is achieved, which further explores its application in combined gene therapy.

CONCLUSIONS

Our research confirmed that this novel platform based on a nano-electromechanical hypersonic resonator works well for controllable single and multi-DNA release. In addition, the unique features of this resonator such as miniaturization and batch manufacturing open its possibility to be developed into a high-throughput, implantable and site targeting DNA release and delivery system.

UV and NIR-Responsive Layer-by-Layer Films Containing 6-Bromo-7-hydroxycoumarin Photolabile Groups

This paper describes polyelectrolyte multilayer films prepared by the layer-by-layer (LbL) technique capable of undergoing dissolution upon exposure to either ultraviolet or near-infrared light. Film dissolution is driven by photochemical deprotection of a random methacrylic copolymer with two types of side chains: (i) 6-bromo-7-hydroxycoumarinyl esters, photocleavable groups that are known to have substantial two-photon photolysis cross sections, and (ii) cationic residues from the commercially available monomer N,N-dimethylaminoethyl methacrylate (DMAEMA). In addition, the dependence of stability of both unirradiated and irradiated films on pH provides experimental evidence for the necessity of disrupting both ion-pairing and hydrophobic interactions between polyelectrolytes to realize film dissolution. This work therefore provides both new fundamental insight regarding photolabile LbL films and expands their applied capabilities to nonlinear photochemical processes.

Self-Cleaning Membranes from Comb-Shaped Copolymers with Photoresponsive Side Groups

In this study, we present a novel self-cleaning, photoresponsive membrane that is capable of removing predeposited foulant layers upon changes in surface morphology in response to UV or visible light irradiation while maintaining stable pore size and water permeance. These membranes were prepared by creating thin film composite (TFC) membranes by coating a porous support membrane with a thin layer of novel comb-shaped graft copolymers at two side-chain lengths featuring polyacrylonitrile (PAN) backbones and photoreactive side chains, synthesized by atom transfer radical polymerization (ATRP). Photoregulated control over membrane properties is attained through a light-induced transition, where the side chains switch between a hydrophobic spiropyran (SP) state and a zwitterionic, hydrophilic merocyanine (MC) state. The light-induced switch between the SP and MC forms changes surface hydrophilicity and causes morphological changes on the membrane surface as evidenced by atomic force microscopy (AFM). Before any phototreatment, the as-coated membrane surface comprises mostly hydrophobic SP groups that allow the adsorption of organic solutes such as proteins the membrane surface, reducing flow rate. Once exposed to UV light, conversion of the SP groups to hydrophilic MC groups leads to the release of adsorbed molecules and the full recovery of the initial water flux. A fouled membrane in the more hydrophilic MC form is also capable of self-cleaning upon conversion to the less hydrophilic SP form by visible light irradiation. The self-cleaning behavior observed for this system, where the surface became less hydrophilic but also experienced a morphological change, demonstrates a novel mechanism that has a mechanical component in addition to the changes in hydrophilicity. It is also the first report, to our knowledge, of self-cleaning performance accompanied by a decrease in hydrophilicity.

pH-Responsive nanofiltration membranes based on porphyrin supramolecular self-assembly by layer-by-layer technique

A novel pH-responsive nanofiltration membrane was fabricated by means of layer-by-layer technique based on porphyrin supramolecular self-assembly.

Poly(styrenesulfonate)-Modified Ni-Ti Layered Double Hydroxide Film: A Smart Drug-Eluting Platform

Drug-eluting stents (DESs) are widely used in the palliative treatment of many kinds of cancers. However, the covered polymers used in DESs are usually associated with stent migration and acute cholecystitis. Therefore, developing noncovered drug-loading layers on metal stents is of great importance. In this work, Ni-Ti layered double hydroxide (Ni-Ti LDH) films were prepared on the surface of nitinol via hydrothermal treatment, and the LDH films were further modified by poly(styrenesulfonate) (PSS). The anticancer drug doxorubicin could be effectively loaded onto the modified films, and drug release could be smartly controlled by the pH. Besides, the drug absorption amounts of cancer cells cultured on the films could be effectively improved. These results indicate that the PSS-modified LDH film may become a promising drug-loading platform that can be used in the design of DESs.

Triggered Release of Encapsulated Cargo from Photoresponsive Polyelectrolyte Nanocomplexes

Combining the numerous advantages of using light as a stimulus, simple free radical random copolymerization, and the easy, all-aqueous preparation of polyelectrolyte complexes (PECs), we prepared photolabile PEC nanoparticles and demonstrated their rapid degradation under UV light. As a proof of concept demonstration, the dye Nile Red was encapsulated in the PECs and successfully released into the surrounding solution as the polyelectrolyte nanocomplex carriers dissolved upon light irradiation.

Near-Infrared Light-Stimulus-Responsive Film as a Sacrificial Layer for the Preparation of Free-Standing Films

It remains a challenge to fabricate sacrificial films that are stable in most of solvents and can be readily decomposed on demand. Here we report the fabrication of a near-infrared (NIR) light decomposable sacrificial film by layer-by-layer (LbL) assembly of UV-light-decomposable poly((4-(2-bromoethoxy)-5-methoxy-2-nitrobenzyl acrylate) triethylammonium bromide) (PNBA-TEA), poly(sodium 4-styrene-sulfonate) (PSS), branched polyethyleimine (bPEI), and lanthanide-doped upconversion nanoparticles (UCNPs). The [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films are stable in deposition solutions of various materials and decompose upon NIR light irradiation. In the [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films, UCNPs can convert NIR light into UV light, which can decompose PNBA-TEA. After immersing the NIR light-irradiated [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films in 0.1 M aqueous NaHCO3 solution, the disintegration of the entire films occurs because of the repulsive force between the negatively charged photoproduct of PNBA-TEA and PSS. LbL-assembled (PAH/PAA)*50 films deposited on top of the NIR-light-decomposable [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films can be conveniently released to produce large-area and defect-free (PAH/PAA)*50 free-standing films after NIR light irradiation and subsequent immersion in 0.1 M aqueous NaHCO3 solution. Because of the satisfactory stability and on-demand decomposable property, the [(PNBA-TEA/PSS)*2/(bPEI/UCNPs)*3]*2 films are promising as sacrificial layers for the fabrication of various free-standing films.