Crab Chitin-Based 2D Soft Nanomaterials for Fully Biobased Electric Devices

Photopolymerization Approach to Advanced Polymer Composites: Integration of Surface-Modified Nanofillers for Enhanced Properties

The incorporation of functionalized nanofillers into polymers via photopolymerization approach has gained significant attention in recent years due to the unique properties of the resulting composite materials. Surface modification of nanofillers plays a crucial role in their compatibility and polymerization behavior within the polymer matrix during photopolymerization. This review focuses on the recent developments in surface modification of various nanofillers, enabling their integration into polymer systems through photopolymerization. The review discusses the key aspects of surface modification of nanofillers, including the selection of suitable surface modifiers, such as photoinitiators and polymerizable groups, as well as the optimization of modification conditions to achieve desired surface properties. The influence of surface modification on the interfacial interactions between nanofillers and the polymer matrix is also explored, as it directly impacts the final properties of the nanocomposites. Furthermore, the review highlights the applications of nanocomposites prepared by photopolymerization, such as sensors, gas separation membranes, purification systems, optical devices, and biomedical materials. By providing a comprehensive overview of the surface modification strategies and their impact on the photopolymerization process and the resulting nanocomposite properties, this review aims to inspire new research directions and innovative ideas in the development of high-performance polymer nanocomposites for diverse applications.

Recent advances in nanomaterial-stabilized pickering foam: Mechanism, classification, properties, and applications

Pickering foam is a type of foam stabilized by solid particles known as Pickering stabilizers. These solid stabilizers adsorb at the liquid-gas interface, providing superior stability to the foam. Because of its high stability, controllability, versatility, and minimal environmental impact, nanomaterial-stabilized Pickering foam has opened up new possibilities and development prospects for foam applications. This review provides an overview of the current state of development of Pickering foam stabilized by a wide range of nanomaterials, including cellulose nanomaterials, chitin nanomaterials, silica nanoparticles, protein nanoparticles, clay mineral, carbon nanotubes, calcium carbonate nanoparticles, MXene, and graphene oxide nanosheets. Particularly, the preparation and surface modification methods of various nanoparticles, the fundamental properties of nanomaterial-stabilized Pickering foam, and the synergistic effects between nanoparticles and surfactants, functional polymers, and other additives are systematically introduced. In addition, the latest progress in the application of nanomaterial-stabilized Pickering foam in the oil industry, food industry, porous functional material, and foam flotation field is highlighted. Finally, the future prospects of nanomaterial-stabilized Pickering foam in different fields, along with directions for further research and development directions, are outlined.

A Mini-Review: Fabrication of Polysaccharide Composite Materials Based on Self-Assembled Chitin Nanofibers

This mini-review presents the fabrication methods for polysaccharide composite materials that employ self-assembled chitin nanofibers (ChNFs) as functional components. Chitin is one of the most abundant polysaccharides in nature. However, it is mostly not utilized because of its poor feasibility and processability. Self-assembled ChNFs are efficiently obtained by a regenerative bottom-up process from chitin ion gels using an ionic liquid, 1-allyl-3-methylimodazolium bromide. This is accomplished by immersing the gels in methanol. The resulting dispersion is subjected to filtration to isolate the regenerated materials, producing ChNF films with a morphology defined by highly entangled nanofibers. The bundles are disintegrated by electrostatic repulsion among the amino groups on the ChNFs in aqueous acetic acid to produce thinner fibers known as scaled-down ChNFs. The self-assembled and scaled-down ChNFs are combined with other chitin components to fabricate chitin-based composite materials. ChNF-based composite materials are fabricated through combination with other polysaccharides.

Algal-based wood as a green and sustainable alternative for environmentally friendly & flexible electronic devices membrane bioreactor

Electronic are usually constructed from non-renewable, non-biodegradable, and hazardous materials. Due to the frequent upgrading or discarding of electronic devices, which contributes significantly to environmental pollution, there is a high demand for electronics made from renewable and biodegradable materials with less harmful components. To this end, due to their flexibility, strong mechanical, and optical properties, wood-based electronics have become very appealing as substrates especially for flexible electronics and optoelectronics. However, incorporating numerous features including high conductivity and transparency, flexibility, and mechanical robustness into an environmentally friendly electronic device remains very challenging. Herein, authors have provided the techniques used to fabricate sustainable wood based flexible electronics coupled with their chemical, mechanical, optical, thermal, thermomechanical, and surface properties for various applications. Additionally, the synthesis of a conductive ink based on lignin and the development of translucent wood as a substrate are covered. Future developments and broader applications of wood-based flexible materials are discussed in the final section of the study, with an emphasis on their potential in fields including wearable electronics, renewable energy, and biomedical devices. This research improves upon prior efforts by demonstrating new ways to simultaneously attain better mechanical and optical qualities and environmental sustainability.

CO2-laser-induced carbonization of calcium chloride-treated chitin nanopaper for applications in solar thermal heating

Remarkable progress has been made in the development of carbonized chitin nanofiber materials for various functional applications, including solar thermal heating, owing to their N- and O-doped carbon structures and sustainable nature. Carbonization is a fascinating process for the functionalization of chitin nanofiber materials. However, conventional carbonization techniques require harmful reagents, high-temperature treatment, and time-consuming processes. Although CO₂ laser irradiation has progressed as a facile and second-scale high-speed carbonization process, CO₂-laser-carbonized chitin nanofiber materials and their applications have not yet been explored. Herein, we demonstrate the CO₂-laser-induced carbonization of chitin nanofiber paper (denoted as chitin nanopaper) and investigate the solar thermal heating performance of the CO₂-laser-carbonized chitin nanopaper. While the original chitin nanopaper was inevitably burned out by CO₂ laser irradiation, CO₂-laser-induced carbonization of the chitin nanopaper was achieved by pretreatment with calcium chloride as a combustion inhibitor. The CO₂-laser-carbonized chitin nanopaper exhibits excellent solar thermal heating performance; its equilibrium surface temperature under 1 sun irradiation is 77.7 °C, which is higher than those of the commercial nanocarbon films and the conventionally carbonized bionanofiber papers. This study paves the way for the high-speed fabrication of carbonized chitin nanofiber materials and their application in solar thermal heating toward the effective utilization of solar energy as heat.

Hydrogelation from Self-Assembled and Scaled-Down Chitin Nanofibers by the Modification of Highly Polar Substituents

Chitin nanofibers (ChNFs) with a bundle structure were fabricated via regenerative self-assembly at the nanoscale from a chitin ion gel with an ionic liquid using methanol. Furthermore, the bundles were disentangled by partial deacetylation under alkaline conditions, followed by cationization and electrostatic repulsion in aqueous acetic acid to obtain thinner nanofibers called scaled-down ChNFs. This review presents a method for hydrogelation from self-assembled and scaled-down ChNFs by modifying the highly polar substituents on ChNFs. The modification was carried out by the reaction of amino groups on ChNFs, which were generated by partial deacetylation, with reactive substituent candidates such as poly(2-oxazoline)s with electrophilic living propagating ends and mono- and oligosaccharides with hemiacetallic reducing ends. The substituents contributed to the formation of network structures from ChNFs in highly polar dispersed media, such as water, to produce hydrogels. Moreover, after the modification of the maltooligosaccharide primers on ChNFs, glucan phosphorylase-catalyzed enzymatic polymerization was performed from the primer chain ends to elongate the amylosic graft chains on ChNFs. The amylosic graft chains formed double helices between ChNFs, which acted as physical crosslinking points to construct network structures, giving rise to hydrogels.

Chitin and chitosan derived from crustacean waste valorization streams can support food systems and the UN Sustainable Development Goals

Crustacean waste, consisting of shells and other inedible fractions, represents an underutilized source of chitin. Here, we explore developments in the field of crustacean-waste-derived chitin and chitosan extraction and utilization, evaluating emerging food systems and biotechnological applications associated with this globally abundant waste stream. We consider how improving the efficiency and selectivity of chitin separation from wastes, redesigning its chemical structure to improve biotechnology-derived chitosan, converting it into value-added chemicals, and developing new applications for chitin (such as the fabrication of advanced nanomaterials used in fully biobased electric devices) can contribute towards the United Nations Sustainable Development Goals. Finally, we consider how gaps in the research could be filled and future opportunities could be developed to make optimal use of this important waste stream for food systems and beyond.

Probing the Structural Details of Chitin Nanocrystal-Water Interfaces by Three-Dimensional Atomic Force Microscopy

Chitin is one of the most abundant and renewable natural biopolymers. It exists in the form of crystalline microfibrils and is the basic structural building block of many biological materials. Its surface crystalline structure is yet to be reported at the molecular level. Herein, atomic force microscopy (AFM) in combination with molecular dynamics simulations reveals the molecular-scale structural details of the chitin nanocrystal (chitin NC)-water interface. High-resolution AFM images reveal the molecular details of chitin chain arrangements at the surfaces of individual chitin NCs, showing highly ordered, stable crystalline structures almost free of structural defects or disorder. 3D-AFM measurements with submolecular spatial resolution demonstrate that chitin NC surfaces interact strongly with interfacial water molecules creating stable, well-ordered hydration layers. Inhomogeneous encapsulation of the underlying chitin substrate by these hydration layers reflects the chitin NCs' multifaceted surface character with different chain arrangements and molecular packing. These findings provide important insights into chitin NC structures at the molecular level, which is critical for developing the properties of chitin-based nanomaterials. Furthermore, these results will contribute to a better understanding of the chemical and enzymatic hydrolysis of chitin and other native polysaccharides, which is also essential for the enzymatic conversion of biomass.

Tuning liquid aggregation of zwitterionic chitin nanocrystals by graphene oxide planar catchers via electrostatic regulation

As important structural units, biomass nanomaterials have exhibited great potentials to construct high-performance macroscopic materials for broad applications by liquid assembly. However, the liquid aggregation of nanomaterials was less investigated. Here, we demonstrate that the one-dimensional (1D) zwitterionic chitin nanocrystals (ZChNCs) can be reversibly captured and released by two-dimensional (2D) planar catchers of graphene oxide (GO) sheets. The dominant electrostatic regulation strategy by pH variation drives that there are three reversible changes for the liquid aggregation of ZChNCs and GO, which were the isolated dispersion state (pH > 7), homogeneous hybridization state (7 ≥ pH ≥ 5), and partially stacked hybridization state (pH < 5), respectively. We found there are no sedimentation during the change of liquid aggregation with the higher absolute Zeta potentials (almost>30 mV). Moreover, the ZChNCs-GO nanohybrids have reached a maximum Zeta potential up to -80 mV, which can be explained by the ionization of excess carboxyl groups on the surface of ZChNCs. Besides, the electrostatic regulation endows the nanohybrids with rheological behavior, which is beneficial to the macro assembly of liquid nanomaterials. This work provides a new class of hybrid colloidal nanomaterials, opens the structural design dimension of macro assembly and holds great potentials in high-performance biodegradable material.

Emerging Synthesis Strategies of 2D MOFs for Electrical Devices and Integrated Circuits

The development of advanced electronic devices is boosting many aspects of modern technology and industry. The ever-increasing demand for advanced electrical devices and integrated circuits calls for the design of novel materials, with superior properties for the improvement of working performance. In this review, a detailed overview of the synthesis strategies of 2D metal organic frameworks (MOFs) acquiring growing attention is presented, as a basis for expansion of novel key materials in electrical devices and integrated circuits. A framework of controllable synthesis routes to be implanted in the synthesis strategies of 2D materials and MOFs is described. In short, the synthesis methods of 2D MOFs are summarized and discussed in depth followed by the illustrations of promising applications relating to various electrical devices and integrated circuits. It is concluded by outlining how 2D MOFs can be synthesized in a simpler, highly efficient, low-cost, and more environmentally friendly way which can open up their applicable opportunities as key materials in advanced electrical devices and integrated circuits, enabling their use in broad aspects of the society.

Global Trends in Natural Biopolymers in the 21st Century: A Scientometric Review

Since the 21st century, natural biopolymers have played an indispensable role in long-term global development strategies, and their research has shown a positive growth trend. However, these substantive scientific results are not conducive to our quick grasp of hotspots and insight into future directions and to understanding which local changes have occurred and which trend areas deserve more attention. Therefore, this study provides a new data-driven bibliometric analysis strategy and framework for mining the core content of massive bibliographic data, based on mathematical models VOS Viewer and CiteSpace software, aiming to understand the research prospects and opportunities of natural biopolymers. The United States is reported to be the most important contributor to research in this field, with numerous publications and active institutions; polymer science is the most popular subject category, but the further emphasis should be placed on interdisciplinary teamwork; mainstream research in this field is divided into five clusters of knowledge structures; since the explosion in the number of articles in 2018, researchers are mainly engaged in three fields: “medical field,” “biochemistry field,” and “food science fields.” Through an in-depth analysis of natural biopolymer research, this article provides a better understanding of trends emerging in the field over the past 22 years and can also serve as a reference for future research.

Single Molecular Layer of Chitin Sub-Nanometric Nanoribbons: One-Pot Self-Exfoliation and Crystalline Assembly into Robust, Sustainable, and Moldable Structural Materials

Sub-nanometric materials (SNMs) represent a series of unprecedented size-/morphology-related properties applicable in theoretical research and diverse cutting-edge applications. However, in-depth investigation and wide utilization of organic SNMs are frequently hindered, owing to the complex synthesis procedures, insufficient colloidal stability, poor processability, and high cost. In this work, a low-cost, energy-efficient, convenient, effective, and scalable method is demonstrated for directly exfoliating chitin SNMs from their natural sources through a one-pot "tandem molecular intercalation" process. The resultant solution-like sample, which exhibits ribbon-like feature and contains more than 85% of the single molecular layer (thickness <0.6 nm), is capable of being solution-processed to different types of materials. Thanks to the sub-nanometric size and rich surface functional groups, chitin SNMs reveal versatile intriguing properties that rarely observe in their nano-counterparts (nanofibrils), e.g., crystallization-like assembly in the colloidal state and alcoplasticity/self-adhesiveness in the bulk aggregate state. The finding in this work not only opens a new avenue for the high value-added utilization of chitin, but also provides a new platform for both the theoretical study and practical applications of organic SNMs.

Electromagnetic Shielding and Flame Retardancy of Composite Films Constructed with Cellulose and Graphene Nanoplates

Aimed at improving the electromagnetic (EM) shielding and flame retardancy of cellulose materials, graphene (GE) nanoplates were introduced into cellulose matrix films by blending in1-allyl-3-methylimidazolium chloride. The structure and performance of the obtained composite films were investigated using scanning electron microscopy, X-ray diffraction, thermogravimetric (TG) analysis, EM shielding effectiveness (SE), and combustion tests. GE introduction formed and stacked laminated structures in the films after drying due to controlled shrinkage of the cellulose matrix. The lamination of GE nanoplates into the films was beneficial for providing EM shielding due to multiple internal reflection of EM radiation; furthermore, they also increased flame resistance based on the “labyrinth effect.” The SE of these composite films increased gradually with increased GE content and reached 22.3 dB under an incident frequency of 1500 MHz. TG analysis indicated that these composite films possessed improved thermal stability due to GE addition. Reduced flammability was confirmed by their extended times to ignition or inability to be ignited, reduced heat release rates observed in cone calorimetry tests, and increased limiting oxygen index values. These films with improved EM shielding and flame retardancy could be considered potential candidates for multipurpose materials in various applications, such as electronics and radar evasion.

A comprehensive review on the recent advancements in natural rubber nanocomposites

Natural rubber (NR) is an eminent sustainable material and is the only agricultural product among various rubbers. Use of nanofillers in NR matrix as a reinforcing agent has gained huge attention because they offer excellent matrix-filler interaction upon forming a good dispersion in the NR matrix. Nanoscale dispersion of fillers lead to greater interfacial interactions between NR and fillers compared to microfillers, which in turn lead to a conspicuous reinforcing effect. Addition of various nanofillers into NR matrix improves not only the mechanical properties but also the electrical, thermal and antimicrobial properties to an extreme level. The current review describes the reinforcing ability of various nanofillers such as clay, graphene, carbon nanotube (CNT), titanium dioxide (TiO₂), chitin, cellulose, barium titanate (BaTiO₃) and lignin in NR matrix. Moreover, reinforcement of various hybrid nanofillers in NR is also discussed in a comprehensive manner. The review also includes the historical trajectory of rubber nanocomposites and a comprehensive account on the factors affecting the properties of the NR nanocomposites.

Homogeneous deacetylation and degradation of chitin in NaOH/urea dissolution system

Since being discovered, alkali/urea has been widely used in the dissolution of natural polysaccharides and the preparation of functional materials such as hydrogels, fibers, films and nanoparticles. This work will focus on verifying the structural stability, homogeneous degradation and deacetylation of chitin in alkali-soluble systems. The chitin was dissolved in NaOH/urea solution and stored at different temperature. At the specific time, the structure, viscosity, acetylation degree (DA) and biocompatibility of chitin and prepared chitosan were determined. The results indicated that dissolution process did not affect the structure and bioactivity of chitin. However, with the increase of storage time and temperature, chitin undergone significant homogeneous deacetylation (DA from 99.5% to 33.2%) and degradation (viscosity from 9284 cP to 1538 cP), accompanying by changes in crystalline structure and thermal stability. Moreover, the processed chitins were no-toxic for the biomedicine applications. This work will provide new ideas for the application of alkali-soluble systems.

Preparation of Composite Materials from Self-Assembled Chitin Nanofibers

Although chitin is a representative abundant polysaccharide, it is mostly unutilized as a material source because of its poor solubility and processability. Certain specific properties, such as biodegradability, biocompatibility, and renewability, make nanofibrillation an efficient approach for providing chitin-based functional nanomaterials. The composition of nanochitins with other polymeric components has been efficiently conducted at the nanoscale to fabricate nanostructured composite materials. Disentanglement of chitin microfibrils in natural sources upon the top-down approach and regeneration from the chitin solutions/gels with appropriate media, such as hexafluoro-2-propanol, LiCl/N, N-dimethylacetamide, and ionic liquids, have, according to the self-assembling bottom-up process, been representatively conducted to fabricate nanochitins. Compared with the former approach, the latter one has emerged only in the last one-and-a-half decade. This short review article presents the preparation of composite materials from the self-assembled chitin nanofibers combined with other polymeric substrates through regenerative processes based on the bottom-up approach.

Biomass-Derived Carbon Materials: Controllable Preparation and Versatile Applications

Biomass-derived carbon materials (BCMs) are encountering the most flourishing moment because of their versatile properties and wide potential applications. Numerous BCMs, including 0D carbon spheres and dots, 1D carbon fibers and tubes, 2D carbon sheets, 3D carbon aerogel, and hierarchical carbon materials have been prepared. At the same time, their structure-property relationship and applications have been widely studied. This paper aims to present a review on the recent advances in the controllable preparation and potential applications of BCMs, providing a reference for future work. First, the chemical compositions of typical biomass and their thermal degradation mechanisms are presented. Then, the typical preparation methods of BCMs are summarized and the relevant structural management rules are discussed. Besides, the strategies for improving the structural diversity of BCMs are also presented and discussed. Furthermore, the applications of BCMs in energy, sensing, environment, and other areas are reviewed. Finally, the remaining challenges and opportunities in the field of BCMs are discussed.

Preparation of Nanochitin/Polystyrene Composite Particles by Pickering Emulsion Polymerization Using Scaled-Down Chitin Nanofibers

In this study, we investigate the Pickering emulsion polymerization of styrene using scaled-down chitin nanofibers (SD-ChNFs) as stabilizers to produce nanochitin/polystyrene composite particles. Prior to emulsion polymerization, an SD-ChNF aqueous dispersion was prepared by disintegrating bundles of the parent ChNFs with an upper hierarchical scale in aqueous acetic acid through ultrasonication. After styrene was added to the resulting dispersions, the mixtures at the desired weight ratios (SD-ChNFs to styrene = 0.1:1–1.4:1) were ultrasonicated to produce Pickering emulsions. Radical polymerization was then conducted in the presence of potassium persulfate as an initiator in the resulting emulsions to fabricate the composite particles. The results show that their average diameters decreased to a minimum of 84 nm as the weight ratios of SD-ChNFs to styrene increased. The IR and 1H-NMR spectra of the composite particle supported the presence of both chitin and polystyrene in the material.

High-performance nanostructured bio-based carbon electrodes for energy storage applications

Polyacrylonitrile (PAN)-based carbon precursor is a well-established and researched material for electrodes in energy storage applications due to its good physical properties and excellent electrochemical performance. However, in the fight of preserving the environment and pioneering renewable energy sources, environmentally sustainable carbon precursors with superior electrochemical performance are needed. Therefore, bio-based materials are excellent candidates to replace PAN as a carbon precursor. Depending on the design requirement (e.g. carbon morphology, doping level, specific surface area, pore size and volume, and electrochemical performance), the appropriate selection of carbon precursors can be made from a variety of biomass and biowaste materials. This review provides a summary and discussion on the preparation and characterization of the emerging and recent bio-based carbon precursors that can be used as electrodes in energy storage applications. The review is outlined based on the morphology of nanostructures and the precursor's type. Furthermore, the review discusses and summarizes the excellent electrochemical performance of these recent carbon precursors in storage energy applications. Finally, a summary and outlook are also given. All this together portrays the promising role of bio-based carbon electrodes in energy storage applications.

Pseudosolvent Intercalator of Chitin: Self-Exfoliating into Sub-1 nm Thick Nanofibrils for Multifunctional Chitinous Materials

Traditionally, energy-intensive and time-consuming postmechanical disintegration processes are inevitable in extracting biopolymer nanofibrils from natural materials and thereby hinder their practical applications. Herein, a new, convenient, scalable, and energy-efficient method for exfoliating nanofibrils (ChNFs) from various chitin sources via pseudosolvent-assisted intercalation process is proposed. These self-exfoliated ChNFs possess controllable thickness from 2.2 to 0.8 nm, average diameter of 4-5 nm, high aspect ratio up to 10³ and customized surface chemistries. Particularly, compared with elementary nanofibrils, ChNFs with few molecular layers thick exhibit greater potential to construct high-performance structural materials, e.g., ductile nanopapers with large elongation up to 70.1% and toughness as high as 30.2 MJ m^-3 , as well as soft hydrogels with typical nonlinear elasticity mimicking that of human-skin. The proposed self-exfoliation concept with unique advantages in the combination of high yield, energy efficiency, scalable productivity, less equipment requirements, and mild conditions opens up a door to extract biopolymer nanofibrils on an industrial scale. Moreover, the present modular ChNFs exfoliation will facilitate researchers to study the effect of thickness on the properties of nanofibrils and provide more insight into the structure-function relationship of biopolymer-based materials.

Interface engineering of NiV-LDH@FeOOH heterostructures as high-performance electrocatalysts for oxygen evolution reaction in alkaline conditions

A hybrid heterostructure eletrocatalyst supported on Ni foam is facilely synthesized as a high-performance OER electrocatalyst for alkaline water electrolysis. Compared to their pristine NiV-LDH counterpart, the self-made NiV-LDH@FeOOH heterostructures exhibit an extremely low overpotential of ∼297 mV at 100 mA cm^-2 current output, and excellent long-term durability.

Large cation ethylammonium incorporated perovskite for efficient and spectra stable blue light-emitting diodes

Perovskite light-emitting diodes (PeLEDs) have showed significant progress in recent years; the external quantum efficiency (EQE) of electroluminescence in green and red regions has exceeded 20%, but the efficiency in blue lags far behind. Here, a large cation CH3CH2NH2+ is added in PEA2(CsPbBr3)2PbBr4 perovskite to decrease the Pb-Br orbit coupling and increase the bandgap for blue emission. X-ray diffraction and nuclear magnetic resonance results confirmed that the EA has successfully replaced Cs+ cations to form PEA2(Cs1-xEAxPbBr3)2PbBr4. This method modulates the photoluminescence from the green region (508 nm) into blue (466 nm), and over 70% photoluminescence quantum yield in blue is obtained. In addition, the emission spectra is stable under light and thermal stress. With configuration of PeLEDs with 60% EABr, as high as 12.1% EQE of sky-blue electroluminescence located at 488 nm has been demonstrated, which will pave the way for the full color display for the PeLEDs.

Liquid crystalline and rheological properties of chitin whiskers with different chemical structures and chargeability

The liquid crystalline and rheological properties of chitin whiskers (CHWs) are significant for their application in fabrication of highly ordered composite materials and optical components. The aim of this work was to elucidate the influence of chemical structure and chargeability (zeta potential, electropositivity, electronegativity or zwitterionic character) on the liquid crystalline and rheological properties of CHWs. Firstly, CHWs with different chemical structure, including positively charged whiskers (CHWs and CHWs-D/60 min) and negatively charged whiskers (mCHWs), were designed via acid hydrolysis, deacetylation, and maleation, respectively. Subsequently, the chargeability of the above whiskers was further regulated by protonation or deprotonation. The whisker aqueous suspensions with high zeta potential behaved as nematic liquid crystals or chiral nematic liquid crystals, whereas those with low zeta potential had no liquid crystal characteristics. The viscosity, G', and G" values of the CHWs and CHWs-D/60 min aqueous suspensions treated with protonation were lower than those of the corresponding whiskers treated with deprotonation. However, the mCHWs exhibited different changes in their rheological properties under protonation or deprotonation due to the electronegativity and zwitterionic characteristics. In addition, the effects of ionic strength and pH on the liquid crystalline and rheological properties of CHWs, CHWs-D/60 min, and mCHWs aqueous suspensions varied since the chemical structure and chargeability of whiskers differ.

Nature-derived materials for the fabrication of functional biodevices

Nature provides an incredible source of inspiration, structural concepts, and materials toward applications to improve the lives of people around the world, while preserving ecosystems, and addressing environmental sustainability. In particular, materials derived from animal and plant sources can provide low-cost, renewable building blocks for such applications. Nature-derived materials are of interest for their properties of biodegradability, bioconformability, biorecognition, self-repair, and stimuli response. While long used in tissue engineering and regenerative medicine, their use in functional devices such as (bio)electronics, sensors, and optical systems for healthcare and biomonitoring is finding increasing attention. The objective of this review is to cover the varied nature derived and sourced materials currently used in active biodevices and components that possess electrical or electronic behavior. We discuss materials ranging from proteins and polypeptides such as silk and collagen, polysaccharides including chitin and cellulose, to seaweed derived biomaterials, and DNA. These materials may be used as passive substrates or support architectures and often, as the functional elements either by themselves or as biocomposites. We further discuss natural pigments such as melanin and indigo that serve as active elements in devices. Increasingly, combinations of different biomaterials are being used to address the challenges of fabrication and performance in human monitoring or medicine. Finally, this review gives perspectives on the sourcing, processing, degradation, and biocompatibility of these materials. This rapidly growing multidisciplinary area of research will be advanced by a systematic understanding of nature-inspired materials and design concepts in (bio)electronic devices.

Naturally Derived Wearable Strain Sensors with Enhanced Mechanical Properties and High Sensitivity

Flexible strain sensors are of great interest for future applications in the next-generation wearable electronic devices. However, most of the existing flexible sensors are based on synthetic polymer materials with limitations in biocompatibility and biodegradability, which may lead to potential environmental pollution. Here, we propose a naturally derived wearable strain sensor based on natural-sourced materials including milk protein fabric, natural rubber, tannic, and vitamin C. The obtained sensors exhibit remarkably enhanced mechanical properties and high sensitivity contrast to currently reported natural resource-based sensors, owing to the metal-ligand interface design and the construction of an organized three-dimensional conductive network, which well fit the requirements of electronic skin. This work represents an important advance toward the fabrication of naturally derived high-performance strain sensors and expanding possibilities in the design of environmental-friendly soft actuators, artificial muscle, and other wearable electronic devices.

Wood-Based Flexible Electronics

Next-generation electronics (e.g., substrate and conductor) need to be high performance, multifunctional, and environmentally friendly. Here, we report the creation of a fully wood-based flexible electronics circuit meeting these requirements, where the substrate, a strong, flexible and transparent wood film, is printed with a lignin-derived carbon nanofibers conductive ink. The wood film fabrication involves extensive removal of lignin and hemicellulose to tailor the nanostructure of the material followed by collapsing of the cell walls. This process preserves the original alignment of the cellulose nanofibers and promotes their binding. The film is flexible, yet strong in fiber direction with a Young's modulus and a tensile strength of 49.9 GPa and 469.9 MPa, respectively. Furthermore, a sustainable and bio-based conductive ink is formulated with lignin-derived carbon nanofibers. The bio-based ink is printed on transparent wood film, and a strain sensor application of the printed circuit is demonstrated. Combining the transparent wood film with the conductive ink produces environmental friendly and sustainable wood-based electronics for potential applications such as flexible circuits and sensors. Moreover, we envision the potential for a scalable and continuous fabrication process as well as end-of-life recyclability.

The Renewable and Sustainable Conversion of Chitin into a Chiral Nitrogen-Doped Carbon-Sheath Nanofiber for Enantioselective Adsorption

Well-known hard-template methods for nitrogen (N)-doped chiral carbon nanomaterials require complicated construction and removal of the template, high-temperature pyrolysis, harsh chemical treatments, and additional N-doping processes. If naturally occurring chiral nematic chitin nanostructures [(C₈ H₁₃ NO₅ )_n ] in exoskeletons were wholly transformed into an N-doped carbon, this would be an efficient and sustainable method to obtain a useful chiral nanomaterial. Here, a simple, sacrificial-template-free, and environmentally mild method was developed to produce an N-doped chiral nematic carbon-sheath nanofibril hydrogel with a surface area >300 m²  g^-1 and enantioselective properties from renewable chitin biomass. Calcium-saturated methanol physically exfoliated bulk chitin and produced a chiral nematic nanofibril hydrogel. Hydrothermal treatment of the chiral chitin hydrogel at 190 °C produced an N-doped chiral carbon-sheath nanofibril hydrogel without N-doping. This material preferentially adsorbed d-lactic acid over l-lactic acid and produced 16.3 % enantiomeric excess of l-lactic acid from a racemic mixture.

Preparation and application performance study of biomass-based carbon materials with various morphologies by a hydrothermal/soft template method

Nitrogen-doped carbon materials with controllable morphologies were prepared via a soft template method using chitosan as the carbon and nitrogen source and F127 or ionic liquid as the template. The performance of the materials as electrodes and adsorbents for carbon dioxide removal were evaluated. Carbon spheres (CSs) with developed micropore structures were obtained without a template, whereas a tubular structure (CSF) containing mesopores with long-range order was obtained using F127. Layered carbon (CSI) containing micro-/mesopores with short- and long-range order was obtained using an ionic liquid. The samples exhibited graphite-like structure and the soft template increased the graphitization degree. Nitrogen existed mainly in the form of pyridine and pyridone groups in CSs and CSF and as pyridine, pyridone, and quaternary groups in CSI. The specific capacitances of CSs, CSF, and CSI were 144, 161, and 178 F g^-1, respectively, at a current density of 1.0 A g^-1 in 1 M sulfuric acid. The carbon dioxide adsorption capacities of CSs, CSF, and CSI were 142, 73, and 115 mg g^-1, respectively; CSs displayed the highest value because of its developed micro- and ultramicroporous structure. Our results indicated that these carbon materials with various morphologies can be used as both electrodes and adsorbents.

Spectra stable blue perovskite light-emitting diodes

Device performance and in particular device stability for blue perovskite light-emitting diodes (PeLEDs) remain considerable challenges for the whole community. In this manuscript, we conceive an approach by tuning the 'A-site' cation composition of perovskites to develop blue-emitters. We herein report a Rubidium-Cesium alloyed, quasi-two-dimensional perovskite and demonstrate its great potential for pure-blue PeLED applications. Composition engineering and in-situ passivation are conducted to further improve the material's emission property and stabilities. Consequently, we get a prominent film photoluminescence quantum yield of around 82% under low excitation density. Encouraged by these findings, we finally achieve a spectra-stable blue PeLED with the peak external quantum efficiency of 1.35% and a half-lifetime of 14.5 min, representing the most efficient and stable pure-blue PeLEDs reported so far. The strategy is also demonstrated to be able to generate efficient perovskite blue emitters and PeLEDs in the whole blue spectral region (from 454 to 492 nm).

Conductive Core-Shell Aramid Nanofibrils: Compromising Conductivity with Mechanical Robustness for Organic Wearable Sensing

One-dimensional organic nanomaterials with a combination of electric conductivity, flexibility, and mechanical robustness are highly in demand in a variety of flexible electronic devices. Herein, conducting polymers were combined with robust Kevlar nanofibrils (aramid nanofibrils, abbreviated as ANFs) via in situ polymerization. Owing to the strong interactions between ANFs and conjugated polymers, the resultant core-shell ANFs showed high electric conductivity in combination with flexibility, robustness, physical stability, and endurance to bending and solvents, in sharp contrast to many inorganic conductive nanomaterials. Due to their responsivity of conductivity to different stimuli (e.g., humidity and strain), their membranes were capable not only of sensing human motions and speech words, but also of showing high sensitivity to variation of environmental humidity. In such a way, these core-shell ANFs may pave the way for combining both conductivity and mechanical properties applicable for diverse wearable devices.

Nitrogen doped microporous carbon nanospheres derived from chitin nanogels as attractive materials for supercapacitors

N-doped porous carbon nanospheres were fabricated directly by pyrolyzing chitin nanogels, which were facilely prepared by mechanical agitation induced sol–gel transition of chitin solution in NaOH/urea solvent. The resulting carbon nanospheres displayed ordered micropores (centered at ∼0.6 nm) and high BET surface area of up to 1363 m² g⁻¹, which is substantially larger than that of the carbons from raw chitin (600 m² g⁻¹). In addition, the carbon nanospheres retained a nitrogen content of 3.2% and excellent conductivity. Consequently, supercapacitor electrodes prepared from the carbon nanospheres pyrolyzed at 800 °C showed a specific capacitance as high as 192 F g⁻¹ at a current density of 0.5 A g⁻¹ and impressive rate capability (81% retention at 10 A g⁻¹). When assembled in a symmetrical two-electrode cell, N-doped porous carbon nanospheres demonstrated excellent cycling stability both in aqueous and organic electrolytes (95% retention after 10 000 cycles at 10 A g⁻¹), together with outstanding energy density of 5.1 W h kg⁻¹ at the power density of 2364.9 W kg⁻¹. This work introduces a novel and efficient method to prepared N-doped porous carbon nanospheres directly from chitin and demonstrates the great potential of utilization of abundant polymers from nature in power storage.

N-doped microporous carbon nanospheres were directly carbonized from chitin nanogels and demonstrated fascinating supercapacitance performance.

Green and Facile Production of Chitin from Crustacean Shells Using a Natural Deep Eutectic Solvent

Natural deep eutectic solvents (NADESs) are sustainable, nontoxic, and biodegradable solvents, which are composed of natural primary metabolites. A green and efficient approach based on choline chloride-malic acid, a NADES, was developed for extracting chitin from crustacean shells, and its effectiveness for demineralization and deproteinization was determined. Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were used to investigate changes in the chemical composition of extracted chitin. The results revealed that most of the minerals and proteins were removed from the shrimp shells by using a NADES with the assistance of microwave irradiation. The quality of the obtained chitin was superior, and it displayed a relative crystallinity of 71%. All of these results were achieved without using harsh chemicals, which can raise environmental issues. This study provides a green and facile approach for chitin production from crustacean shells and reveals the potential of NADESs for applications in the extraction of biopolymers from natural sources.

Biopolymer nanofibrils: structure, modeling, preparation, and applications

Biopolymer nanofibrils exhibit exceptional mechanical properties with a unique combination of strength and toughness, while also presenting biological functions that interact with the surrounding environment. These features of biopolymer nanofibrils profit from their hierarchical structures that spun angstrom to hundreds of nanometer scales. To maintain these unique structural features and to directly utilize these natural supramolecular assemblies, a variety of new methods have been developed to produce biopolymer nanofibrils. In particular, cellulose nanofibrils (CNFs), chitin nanofibrils (ChNFs), silk nanofibrils (SNFs) and collagen nanofibrils (CoNFs), as the four most abundant biopolymer nanofibrils on earth, have been the focus of research in recent years due to their renewable features, wide availability, low-cost, biocompatibility, and biodegradability. A series of top-down and bottom-up strategies have been accessed to exfoliate and regenerate these nanofibrils for versatile advanced applications. In this review, we first summarize the structures of biopolymer nanofibrils in nature and outline their related computational models with the aim of disclosing fundamental structure-property relationships in biological materials. Then, we discuss the underlying methods used for the preparation of CNFs, ChNFs, SNF and CoNFs, and discuss emerging applications for these biopolymer nanofibrils.

Ovalbumin self-assembles into amyloid nanosheets that elicit immune responses and facilitate sustained drug release

Amyloids are associated with many neurodegenerative diseases, motivating investigations into their structure and function. Although not linked to a specific disease, albumins have been reported to form many structural aggregates. We were interested in investigating host immune responses to amyloid fibrils assembled from the model protein ovalbumin. Surprisingly, upon subjecting ovalbumin to standard denaturing conditions, we encountered giant protein nanosheets harboring amyloid-like features and hypothesized that these nanosheets might have potential in clinical or therapeutic applications. We found that the nanosheets, without the administration of any additional adjuvant, evoked a strong antibody response in mice that was higher than that observed for native ovalbumin. This suggests that amyloid nanosheets have a self-adjuvanting property. The nanosheet-induced immune response was helper T cell 2 (Th2) biased and negligibly inflammatory. While testing whether the nanosheets might form depots for the sustained release of precursor proteins, we did observe release of ovalbumin that mimicked the conformation of native protein. Moreover, the nanosheets could load the anticancer drug doxorubicin and release it in a slow and sustained manner. Taken together, our results suggest that amyloid nanosheets should be further investigated as either an antigen delivery vehicle or a multifunctional antigen and drug co-delivery system, with potential applications in simultaneous immunotherapy and chemotherapy.

Ultrafine Co Nanoparticles Encapsulated in Carbon-Nanotubes-Grafted Graphene Sheets as Advanced Electrocatalysts for the Hydrogen Evolution Reaction

The rational design of an efficient and inexpensive electrocatalyst based on earth-abundant 3d transition metals (TMs) for the hydrogen evolution reaction still remains a significant challenge in the renewable energy area. Herein, a novel and effective approach is developed for synthesizing ultrafine Co nanoparticles encapsulated in nitrogen-doped carbon nanotubes (N-CNTs) grafted onto both sides of reduced graphene oxide (rGO) (Co@N-CNTs@rGO) by direct annealing of GO-wrapped core-shell bimetallic zeolite imidazolate frameworks. Benefiting from the uniform distribution of Co nanoparticles, the in-situ-formed highly graphitic N-CNTs@rGO, the large surface area, and the abundant porosity, the as-fabricated Co@N-CNTs@rGO composites exhibit excellent electrocatalytic hydrogen evolution reaction (HER) activity. As demonstrated in electrochemical measurements, the composites can achieve 10 mA cm^-2 at low overpotential with only 108 and 87 mV in 1 m KOH and 0.5 m H₂ SO₄ , respectively, much better than most of the reported Co-based electrocatalysts over a wide pH range. More importantly, the synthetic strategy is versatile and can be extended to prepare other binary or even ternary TMs@N-CNTs@rGO (e.g., Co-Fe@N-CNTs@rGO and Co-Ni-Cu@N-CNTs@rGO). The strategy developed here may open a new avenue toward the development of nonprecious high-performance HER catalysts.

One-step Preparation of Monodisperse Multifunctional Macroporous Particles through a Spontaneous Physical Process

Macroporous particles that combine the property features of spherical structures and porous materials are expected to find use over micro- and macroscopic length scales from miniaturized systems such as cell imaging, drug and gene delivery to industrial applications. However, the capacity for de novo design of such materials is still limited. Here, a spontaneous process to fabricate monodisperse multifunctional macroporous particles (MMMPs) by high internal phase emulsion templating is reported. An interesting physical phenomenon involving self-emulsification and synergistic effects between nanoparticles and amphiphilic diblock copolymers is observed in this process. These MMMPs, featured with tailor-made pore structures, pH responsiveness, and magnetic response, could be used as stimuli-responsive carriers for multiple functional molecules with a high loading and releasing efficiency. This new understanding regarding the underlying phenomena that control self-emulsification behavior and synergistic action in emulsion systems provides a unique outlook and a novel approach to the design of potentially multifunctional porous materials for controllable release and delivery processes.

Nacre-Templated Synthesis of Highly Dispersible Carbon Nanomeshes for Layered Membranes with High-Flux Filtration and Sensing Properties

Marine shells not only represent a rapidly accumulating type of fishery wastes but also offer a unique sort of hybrid nanomaterials produced greenly and massively in nature. The elaborate "brick and mortar" structures of nacre enabled the synthesis of carbon nanomeshes with <1 nm thickness, hierarchical porosity, and high specific surface area through pyrolysis, in which two-dimensional (2D) organic layers served as the carbonaceous precursor and aragonite platelets as the hard template. Mineral bridges within 2D organic layers templated the formation of mesh pores of 20-70 nm. In contrast to other hydrophobic carbon nanomaterials, these carbon nanomeshes showed super dispersibility in diverse solvents and thus processability for membranes through filtration, patterning, spray-coating, and ink-writing. The carbon membranes with layered structures were capable of serving not only for high-flux filtration and continuous flow absorption but also for electrochemical and strain sensing with high sensitivity. Thus, utilization of marine shells, on one hand, relieves the environmental concern of shellfish waste, on the other hand, offers a facile, green, low-cost, and massive approach to synthesize unique carbon nanomeshes alternative to graphene nanomeshes and applicable in environmental adsorption, filtration, wearable sensors, and flexible microelectronics.