2D Porous Carbons prepared from Layered Organic-Inorganic Hybrids and their Use as Oxygen-Reduction Electrocatalysts

Encapsulating CoNi nanoparticles into nitrogen-doped carbon nanotube arrays as bifunctional oxygen electrocatalyst for rechargeable zinc-air batteries

The high theoretical specific energy and environmental friendliness of zinc-air batteries (ZABs) have garnered significant attention. However, the practical application of ZABs requires overcoming the sluggish kinetics associated with oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, 3D self-supported nitrogen-doped carbon nanotubes (N-CNTs) arrays encapsulated by CoNi nanoparticles on carbon fiber cloth (CoNi@N-CNTs/CFC) are synthesized as bifunctional catalysts for OER and ORR. The 3D interconnected N-CNTs arrays not only improve the electrical conductivity, the permeation and gas escape capabilities of the electrode, but also enhance the corrosion resistance of CoNi metals. DFT calculations reveal that the co-existence of Co and Ni synergistically reduces the energy barrier for OOH conversion to OH, thereby optimizing the Gibbs free energy of the catalysts. Additionally, analysis of the change in energy barrier during the rate-determining step suggests that the primary catalytic active center is Ni site for OER. As a result, CoNi@N-CNTs/CFC exhibits superior catalytic activity with an overpotential of 240 mV at 10 mA cm-2 toward OER, and the onset potential of 0.92 V for ORR. Moreover, utilization of CoNi@N-CNTs/CFC in liquid and solid-state ZABs exhibited exceptional stability, manifesting a consistent cycling operation lasting for 100 and 15 h, respectively.

Three-dimensional porous structured cobalt- and nitrogen-doped carbon nanotube electrocatalyst derived from cobalt-based zeolitic imidazolate framework nanoleaves for high performance zinc-air battery

The development of efficient and cost-effective electrocatalysts to overcome the intrinsic sluggish kinetics of the oxygen reduction reaction (ORR) in zinc-air batteries is crucial. In this study, we introduce a strategy that integrates a template-assisted synthesis with subsequent thermal treatment to fabricate an active and stable cobalt-based nitrogen-doped carbon electrocatalyst, denoted as Co-N-CNT. The strategy adjusts the disordered architecture of the zeolitic imidazolate framework (ZIF) through the synergistic effect of bimetallic species, restricted the growth of zeolitic imidazolate framework nanoleaves (ZIF-L) using salt templates, and directed the transformation from a two-dimensional blade-like morphology to a three-dimensional multi-tiered composite structure. Notably, the Co-N-CNT-800 sample, synthesized at an optimized pyrolysis temperature of 800 °C, exhibits a half-wave potential of 0.89 V and demonstrates stability with sustained cycling over 21 h, which is comparable to the performance of commercial Pt/C electrocatalysts. Moreover, when employed as the cathode in zinc-air batteries, Co-N-CNT-800 not only surpasses Pt/C in terms of power density but also exhibits long-term charge/discharge stability. This findings offer a viable pathway for the design of active and cost-effective ORR electrocatalysts, holding promise for applications in the electrochemical energy storage and conversion systems.

Simultaneously Engineering the First and Second Coordination Shells of Single Iron Catalysts for Enhanced Oxygen Reduction

The atomically dispersed Fe-N4 active site presents enormous potential for various renewable energy conversions. Despite its already remarkable catalytic performance, the local atomic microenvironment of each Fe atom can be regulated to further enhance its efficiency. Herein, a novel conceptual strategy that utilizes a simple salt-template polymerization method to simultaneously adjust the first coordination shell (Fe-N3S1) and second coordination shell (C-S-C, a structure similar to thiophene) of Fe-N4 isolated atoms is proposed. Theoretical studies suggest that this approach can redistribute charge density in the MN4 moiety, lowering the d-band center of the metal site. This weakens the binding of oxygenated intermediates, enhancing oxygen reduction reaction (ORR) activity when compared to only implementing coordination shell regulation. Based on the above discovery, a single Fe atom electrocatalyst with the optimal Fe-N3S1-S active moiety incorporated in nitrogen, sulfur co-doped graphene (Fe-SAc/NSG) is designed and synthesized. The Fe-SAc/NSG catalyst exhibits excellent alkaline ORR activity, exceeding benchmark Pt/C and most Fe-SAc ORR electrocatalysts, as well as superior stability in Zn-air battery. This work aims to pave the way for creating highly active single metal atom catalysts through the localized regulation of their atomic structure.

Isolated Binary Fe-Ni Metal-Nitrogen Sites Anchored on Porous Carbon Nanosheets for Efficient Oxygen Electrocatalysis through High-Temperature Gas-Migration Strategy

Atomically dispersed dual-site catalysts can regulate multiple reaction processes and provide synergistic functions based on diverse molecules and their interfaces. However, how to synthesize and stabilize dual-site single-atom catalysts (DACs) is confronted with challenges. Herein, we report a facile high-temperature gas-migration strategy to synthesize Fe-Ni DACs on nitrogen-doped carbon nanosheets (FeNiSAs/NC). FeNiSAs/NC exhibits a high half-wave potential (0.88 V) for the oxygen reduction reaction (ORR) and a low overpotential of 410 mV at 10 mA cm-2 for the oxygen evolution reaction (OER). As an air electrode for Zn-air batteries (ZABs), it shows better performances in aqueous ZABs and excellent stability and flexibility in solid-state ZABs. The high specific surface area (1687.32 m2/g) of FeNiSAs/NC is conducive to electron transport. Density functional theory (DFT) reveals that the Fe sites are the active center, and Ni sites can significantly optimize the free energy of the oxygen-containing intermediate state on Fe sites, contributing to the improvement of ORR and the corresponding OER activities. This work can provide guidance for the rational design of DACs and understand the structure-activity relationship of SACs with multiple active sites for electrocatalytic energy conversion.

Structural and compositional analysis of MOF-derived carbon nanomaterials for the oxygen reduction reaction

The development of low-cost and efficient cathode catalysts is crucial for the advancement of fuel cells, as the oxygen reduction reaction (ORR) on the cathode is constrained by expensive commercial Pt/C catalysts and a significant energy barrier. Metal-organic frameworks (MOFs) are considered excellent precursors for synthesizing carbon nanomaterials due to their simple synthesis, rich structure and composition. MOF-derived carbon nanomaterials (MDCNM) inherit the morphology of their precursors at low dimensional scales, providing abundant edge defects, larger specific surface area, and excellent electron transport paths. Furthermore, the rich composition of MOFs enables the carbon nanomaterials derived from them to exhibit various physicochemical properties, including stronger electron gaining ability, oxygen affinity, and a higher degree of graphitization, resulting in excellent ORR activity. However, a more detailed analysis is necessary to understand the advantages and mechanisms of MDCNM in the field of the ORR. This review classifies and summarizes the structure and different chemical compositions of MDCNM in low dimensions, and provides an in-depth analysis of the reasons for their improved ORR activity. Additionally, the recent practical applications of MDCNM as cathode material in fuel cells are introduced and analyzed in detail, with a focus on the enhanced electrochemical performance.

A polymer tethering strategy to achieve high metal loading on catalysts for Fenton reactions

The development of heterogenous catalysts based on the synthesis of 2D carbon-supported metal nanocatalysts with high metal loading and dispersion is important. However, such practices remain challenging to develop. Here, we report a self-polymerization confinement strategy to fabricate a series of ultrafine metal embedded N-doped carbon nanosheets (M@N-C) with loadings of up to 30 wt%. Systematic investigation confirms that abundant catechol groups for anchoring metal ions and entangled polymer networks with the stable coordinate environment are essential for realizing high-loading M@N-C catalysts. As a demonstration, Fe@N-C exhibits the dual high-efficiency performance in Fenton reaction with both impressive catalytic activity (0.818 min-1) and H2O2 utilization efficiency (84.1%) using sulfamethoxazole as the probe, which has not yet been achieved simultaneously. Theoretical calculations reveal that the abundant Fe nanocrystals increase the electron density of the N-doped carbon frameworks, thereby facilitating the continuous generation of long-lasting surface-bound •OH through lowering the energy barrier for H2O2 activation. This facile and universal strategy paves the way for the fabrication of diverse high-loading heterogeneous catalysts for broad applications.

Polyethylenimine-Ethylenediamine-Induced Pd Metallene toward Alkaline Oxygen Reduction

Designing two-dimensional (2D) materials functionalized with organic molecules is an effective tactic to enhance catalytic performances for the oxygen reduction reaction (ORR). Herein, we synthesize Pd metallene with in situ modification of polyethylenimine-ethylenediamine (Pd@PEI-EDA metallene), in which PEI-EDA serves as both the structure-directing agent and modifier. Pd@PEI-EDA metallene has ample active sites and tuneable electronic structures due to ultrathin nanosheets with abundant wrinkles and interfacial structure. In contrast with commercial Pd/C and Pt/C, Pd@PEI-EDA metallene displays preferable catalytic ORR performance under alkaline conditions. This work offers an in situ interface engineering tactic for the preparation of 2D polymer-metal electrocatalysts to boost the ORR performance.

Fe-N-C catalysts decorated with oxygen vacancies-rich CeOx to increase oxygen reduction performance for Zn-air batteries

Platinum group metal (PGM)-free catalysts represented by nitrogen and iron co-doped carbon (Fe-N-C) catalysts are desirable and critical for metal-air batteries, but challenges still exist in performance and stability. Here, cerium oxides (CeO_x) are incorporated into a two-dimensional Fe-N-C catalyst (FeNC-Ce-950) via a host-guest strategy. The Ce⁴⁺/Ce³⁺ redox system creates a large number of oxygen vacancies for rapid O₂ adsorption to accelerate the kinetics of oxygen reduction reaction (ORR). Consequently, the as-synthesized FeNC-Ce-950 catalyst exhibits a half-wave potential (E_1/2) of 0.921 V and negligible decay (<2 mV for ΔE_1/2) after 5,000 accelerated durability cycles, significantly outperforming most of ORR catalysts reported in recent years and precious metal counterparts. When applied in a zinc-air battery, it demonstrates a peak power density of 175 mW cm^-2 and a specific capacity of 757 mAh g_Zn^-1. This study also provides a reference for the exploration of Fe-N-C catalysts decorated with variable valence metal oxides.

Hierarchical meso-micro porous FeNC derived from tripolycyanamide-based microporous polymer as efficient electrocatalyst for oxygen reduction reaction

Designing porous FeNC nanomaterials with highly efficient active sites is an effective strategy for constructing high-performance oxygen reduction reaction (ORR) electrocatalysts. N-containing porous organic polymers (POPs) have emerged as promising candidates for the preparation of porous FeNC catalysts. Here, N-rich tripolycyanamide-based microporous polymer (TCAMP)-coated SiO₂ nanospheres (SiO₂@TACMP) were prepared as the precursors of an Fe-N doped hierarchical meso-micro porous carbon (Fe-N-HMC) electrocatalyst for the ORR. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM) characterizations demonstrated that the Fe-N-HMC catalyst possessed a higher content percentage of Fe-N_x active sites and a better distribution of Fe nanoparticles than its Fe-N doped microporous carbon (Fe-N-MC) counterpart. N₂ adsorption-desorption isotherm analysis showed that Fe-N-HMC catalyst exhibited a hierarchical meso-micro porous system, with a Brunauer-Emmett-Teller (BET) surface area (S_BET) of 733 m² g^-1 (∼2 times of Fe-N-MC's S_BET). As a result, Fe-N-HMC catalyst presented a highly efficient ORR performance with a half-wave potential of 0.856 mV, which is similar to the commercial grade 20 wt% Pt/C catalyst and superior to the Fe-N-MC catalyst. Moreover, the as-synthesized Fe-N-HMC catalyst displayed a better durability and methanol tolerance than the commercial Pt/C catalyst. Therefore, Fe-N-HMC shows great promise as an ORR catalyst for fuel batteries and metal-air cells due to its low-cost, high activity, and good stability.

Bifunctional P-Containing RuO2 Catalysts Prepared from Surplus Ru Co-Ordination Complexes and Applied to Zn/Air Batteries

An innovative synthetic route that involves the thermal treatment of selected Ru co-ordination complexes was used to prepare RuO₂-based materials with catalytic activity for oxygen reduction (ORR) and oxygen evolution (OER) reactions. Extensive characterization confirmed the presence of Ru metal and RuP₃O₉ in the materials, with an improved electrocatalytic performance obtained from calcinated [(RuCl₂(PPh₃)₃]. A mechanistic approach for the obtention of such singular blends and for the synergetic contribution of these three species to electrocatalysis is suggested. Catalysts added to carbon-based electrodes were also tested in all-solid and flooded alkaline Zn/air batteries. The former displayed a specific discharge capacity of 10.5 A h g^-1 at 250 mA g^-1 and a power density of 4.4 kW kg^-1 cm^-2. Besides, more than 800 discharge/charge cycles were reached in the flooded alkaline Zn/air battery.

Carbonate-Hydroxide Induced Metal-Organic Framework Transformation Strategy for Honeycomb-Like NiCoP Nanoplates to Drive Enhanced pH-Universal Hydrogen Evolution

Developing a low-cost, pH-universal electrocatalyst is desirable for electrochemical water splitting but remains a challenge. NiCoP is a promising non-noble hydrogen-evolving electrocatalyst due to its high intrinsic electrical conductivity, fast mass transfer effects, and tunable electronic structure. Nevertheless, its hydrogen evolution reaction (HER) activity in full pH-range has been rarely developed. Herein, a Ni-Co carbonate-hydroxide induced metal-organic framework transformation strategy is proposed to in situ grow porous, honeycomb-like NiCoP nanoplates on Ni foam for high-performance, pH-universal hydrogen evolution reaction. The resultant NiCoP catalyst exhibits a highly 2D nanoporous network in which 20-50 nm, well-crystalline nanoparticles are interconnected with each other closely, and delivers versatile HER electroactivity with η₁₀ of 98, 105, and 97 mV in 1 m KOH, 0.5 m H₂ SO₄ , and 1 m phosphate buffer solution electrolytes, respectively. This overpotential remarkably surpasses the one of commercial Pt/Cs in both neutral and alkaline media at a large current density (>100 mA cm^-2 ). The corresponding full water-splitting electrolyzer constructed from the 2D porous NiCoP cathode requires only a cell voltage of 1.43 V at 10 mA cm^-2 , superior to most recently reported electrocatalysts. This work may open up a new avenue on the rational design of nonprecious, pH-universal electrocatalyst.

Macro/Micro-Environment Regulating Carbon-Supported Single-Atom Catalysts for Hydrogen/Oxygen Conversion Reactions

Single-atom catalysts (SACs) have attracted tremendous research interest due to their unique atomic structure, maximized atom utilization, and remarkable catalytic performance. Among the SACs, the carbon-supported SACs have been widely investigated due to their easily controlled properties of the carbon substrates, such as the tunable morphologies, ordered porosity, and abundant anchoring sites. The electrochemical performance of carbon-supported SACs is highly related to the morphological structure of carbon substrates (macro-environment) and the local coordination environments of center metals (micro-environment). This review aims to provide a comprehensive summary on the macro/micro-environment regulating carbon-supported SACs for highly efficient hydrogen/oxygen conversion reactions. The authors first summarize the macro-environment engineering strategies of carbon-supported SACs with altered specific surface areas and porous properties of the carbon substrates, facilitating the mass diffusion kinetics and structural stability. Then the micro-environment engineering strategies of carbon-supported SACs are discussed with the regulated atomic structure and electronic structure of metal centers, boosting the catalytic performance. Insights into the correlation between the co-boosted effect from the macro/micro-environments and catalytic activity for hydrogen/oxygen conversion reactions are summarized and discussed. Finally, the challenges and perspectives are addressed in building highly efficient carbon-supported SACs for practical applications.

Solid-State Reaction Synthesis of Nanoscale Materials: Strategies and Applications

Nanomaterials (NMs) with unique structures and compositions can give rise to exotic physicochemical properties and applications. Despite the advancement in solution-based methods, scalable access to a wide range of crystal phases and intricate compositions is still challenging. Solid-state reaction (SSR) syntheses have high potential owing to their flexibility toward multielemental phases under feasibly high temperatures and solvent-free conditions as well as their scalability and simplicity. Controlling the nanoscale features through SSRs demands a strategic nanospace-confinement approach due to the risk of heat-induced reshaping and sintering. Here, we describe advanced SSR strategies for NM synthesis, focusing on mechanistic insights, novel nanoscale phenomena, and underlying principles using a series of examples under different categories. After introducing the history of classical SSRs, key theories, and definitions central to the topic, we categorize various modern SSR strategies based on the surrounding solid-state media used for nanostructure growth, conversion, and migration under nanospace or dimensional confinement. This comprehensive review will advance the quest for new materials design, synthesis, and applications.

Recent Advances in ZIF-Derived Atomic Metal-N-C Electrocatalysts for Oxygen Reduction Reaction: Synthetic Strategies, Active Centers, and Stabilities

Exploring highly active, stable electrocatalysts with earth-abundant metal centers for the oxygen reduction reaction (ORR) is essential for sustainable energy conversion. Due to the high cost and scarcity of platinum, it is a general trend to develop metal-N-C (M-N-C) electrocatalysts, especially those prepared from the zeolite imidazolate framework (ZIF) to replace/minimize usage of noble metals in ORR electrocatalysis for their amazingly high catalytic efficiency, great stability, and readily-tuned electronic structure. In this review, the most pivotal advances in mechanisms leading to declined catalytic performance, synthetic strategies, and design principles in engineering ZIF-derived M-N-C for efficient ORR catalysis, are presented. Notably, this review focuses on how to improve intrinsic ORR activity, such as M-N_x -C_y coordination structures, doping metal-free heteroatoms in M-N-C, dual/multi-metal sites, hydrogen passivation, and edge-hosted M-N_x . Meanwhile, how to increase active sites density, including formation of M-N complex, spatial confinement effects, and porous structure design, are discussed. Thereafter, challenges and future perspectives of M-N-C are also proposed. The authors believe this instructive review will provide experimental and theoretical guidance for designing future, highly active ORR electrocatalysts, and facilitate their applications in diverse ORR-related energy technologies.

Emerging 2D Materials for Electrocatalytic Applications: Synthesis, Multifaceted Nanostructures, and Catalytic Center Design

Currently, the development of advanced 2D nanomaterials has become an interdisciplinary subject with extensive studies due to their extraordinary physicochemical performances. Beyond graphene, the emerging 2D-material-derived electrocatalysts (2D-ECs) have aroused great attention as one of the best candidates for heterogeneous electrocatalysis. The tunable physicochemical compositions and characteristics of 2D-ECs enable rational structural engineering at the molecular/atomic levels to meet the requirements of different catalytic applications. Due to the lack of instructive and comprehensive reviews, here, the most recent advances in the nanostructure and catalytic center design and the corresponding structure-function relationships of emerging 2D-ECs are systematically summarized. First, the synthetic pathways and state-of-the-art strategies in the multifaceted structural engineering and catalytic center design of 2D-ECs to promote their electrocatalytic activities, such as size and thickness, phase and strain engineering, heterojunctions, heteroatom doping, and defect engineering, are emphasized. Then, the representative applications of 2D-ECs in electrocatalytic fields are depicted and summarized in detail. Finally, the current breakthroughs and primary challenges are highlighted and future directions to guide the perspectives for developing 2D-ECs as highly efficient electrocatalytic nanoplatforms are clarified. This review provides a comprehensive understanding to engineer 2D-ECs and may inspire many novel attempts and new catalytic applications across broad fields.

Molecular Engineering toward High-Crystallinity Yet High-Surface-Area Porous Carbon Nanosheets for Enhanced Electrocatalytic Oxygen Reduction

Carbon-based nanomaterials have been regarded as promising non-noble metal catalysts for renewable energy conversion system (e.g., fuel cells and metal-air batteries). In general, graphitic skeleton and porous structure are both critical for the performances of carbon-based catalysts. However, the pursuit of high surface area while maintaining high graphitization degree remains an arduous challenge because of the trade-off relationship between these two key characteristics. Herein, a simple yet efficient approach is demonstrated to fabricate a class of 2D N-doped graphitized porous carbon nanosheets (GPCNSs) featuring both high crystallinity and high specific surface area by utilizing amine aromatic organoalkoxysilane as an all-in-one precursor and FeCl3 ·6H2 O as an active salt template. The highly porous structure of the as-obtained GPCNSs is mainly attributed to the alkoxysilane-derived SiOx nanodomains that function as micro/mesopore templates; meanwhile, the highly crystalline graphitic skeleton is synergistically contributed by the aromatic nucleus of the precursor and FeCl3 ·6H2 O. The unusual integration of graphitic skeleton with porous structure endows GPCNSs with superior catalytic activity and long-term stability when used as electrocatalysts for oxygen reduction reaction and Zn-air batteries. These findings will shed new light on the facile fabrication of highly porous carbon materials with desired graphitic structure for numerous applications.

Promoting Oxygen Reduction via Crafting Bridge-bonded Oxygen Ligands on Iron Single-Atom Catalyst

Single-atom Fe-N-C catalysts with Fe-N4 coordination structures hailed as the most promising candidates are prohibited by the severe aggregation and migration of metal atoms. Bonding confine strategies can effectively regulate...

Anchoring Fe-N-C Sites on Hierarchically Porous Carbon Sphere and CNT Interpenetrated Nanostructures as Efficient Cathodes for Zinc-Air Batteries

Engineering efficient zinc-air batteries have attracted tremendous attention because of their essential role in the field of renewable energy systems. However, the sluggish reaction kinetics of the oxygen reduction reaction (ORR) at the air cathode impair the battery performance significantly. Recently, metal-N-C-based porous carbon nanoarchitectures have emerged as promising ORR electrocatalysts in zinc-air batteries. Herein, taking advantage of metal-organic complexation and mesoporous silica templates, we successfully anchor Fe-N-C sites on hierarchically porous carbon sphere and carbon nanotube interpenetrated nanostructures (Fe-N-C/HPCS@CNT) to serve as efficient cathodes for zinc-air batteries. Benefiting from its synergistic effects between the highly active Fe-N-C sites, ultrahigh surface areas, and unique hierarchically porous nanostructures, Fe-N-C/HPCS@CNT exhibits preferable ORR performance (E_1/2 = 0.873 V) compared to commercial Pt/C (E_1/2 = 0.841 V). Most importantly, when used as a cathode catalyst for homemade zinc-air batteries, Fe-N-C/HPCS@CNT exhibits gratifying peak power density (164.0 mW cm^-2), large specific capacity (762.0 mAh g^-1), superior long-term stability, extraordinary rate capability, and excellent charge/discharge performance. We believe that this report will not only offer new insights into the design of Fe-N-C-based catalysts but also promote the practical utilization of Fe-N-C-based cathodes for a wide range of energy applications.

Metal-Organic-Framework-Derived Nanostructures as Multifaceted Electrodes in Metal-Sulfur Batteries

Metal-sulfur batteries (MSBs) are considered up-and-coming future-generation energy storage systems because of their prominent theoretical energy density. However, the practical applications of MSBs are still hampered by several critical challenges, i.e., the shuttle effects, sluggish redox kinetics, and low conductivity of sulfur species. Recently, benefiting from the high surface area, regulated networks, molecular/atomic-level reactive sites, the metal-organic frameworks (MOFs)-derived nanostructures have emerged as efficient and durable multifaceted electrodes in MSBs. Herein, a timely review is presented on recent advancements in designing MOF-derived electrodes, including fabricating strategies, composition management, topography control, and electrochemical performance assessment. Particularly, the inherent charge transfer, intrinsic polysulfide immobilization, and catalytic conversion on designing and engineering of MOF nanostructures for efficient MSBs are systematically discussed. In the end, the essence of how MOFs' nanostructures influence their electrochemical properties in MSBs and conclude the future tendencies regarding the construction of MOF-derived electrodes in MSBs is exposed. It is believed that this progress review will provide significant experimental/theoretical guidance in designing and understanding the MOF-derived nanostructures as multifaceted electrodes, thus offering promising orientations for the future development of fast-kinetic and robust MSBs in broad energy fields.

Covalent organic frameworks (COFs) for electrochemical applications

Covalent organic frameworks are a class of extended crystalline organic materials that possess unique architectures with high surface areas and tuneable pore sizes. Since the first discovery of the topological frameworks in 2005, COFs have been applied as promising materials in diverse areas such as separation and purification, sensing or catalysis. Considering the need for renewable and clean energy production, many research efforts have recently focused on the application of porous materials for electrochemical energy storage and conversion. In this respect, considerable efforts have been devoted to the design and synthesis of COF-based materials for electrochemical applications, including electrodes and membranes for fuel cells, supercapacitors and batteries. This review article highlights the design principles and strategies for the synthesis of COFs with a special focus on their potential for electrochemical applications. Recently suggested hybrid COF materials or COFs with hierarchical porosity will be discussed, which can alleviate the most challenging drawback of COFs for these applications. Finally, the major challenges and future trends of COF materials in electrochemical applications are outlined.

Metal-Organic-Framework-Engineered Enzyme-Mimetic Catalysts

Nanomaterial-based enzyme-mimetic catalysts (Enz-Cats) have received considerable attention because of their optimized and enhanced catalytic performances and selectivities in diverse physiological environments compared with natural enzymes. Recently, owing to their molecular/atomic-level catalytic centers, high porosity, large surface area, high loading capacity, and homogeneous structure, metal-organic frameworks (MOFs) have emerged as one of the most promising materials in engineering Enz-Cats. Here, the recent advances in the design of MOF-engineered Enz-Cats, including their preparation methods, composite constructions, structural characterizations, and biomedical applications, are highlighted and commented upon. In particular, the performance, selectivities, essential mechanisms, and potential structure-property relations of these MOF-engineered Enz-Cats in accelerating catalytic reactions are discussed. Some potential biomedical applications of these MOF-engineered Enz-Cats are also breifly proposed. These applications include, for example, tumor therapies, bacterial disinfection, tissue regeneration, and biosensors. Finally, the future opportunities and challenges in emerging research frontiers are thoroughly discussed. Thereby, potential pathways and perspectives for designing future state-of-the-art Enz-Cats in biomedical sciences are offered.

Amorphous MnCO3/C Double Layers Decorated on BiVO4 Photoelectrodes to Boost Nitrogen Reduction

NH₃ is mainly obtained by the Haber-Bosch method in the process of industrial production, which is not only accompanied by huge energy consumption but also environmental pollution. The reduction of N₂ to NH₃ under mild conditions is an important breakthrough to solve the current energy and environmental problems, so the preparation of catalysts that can effectively promote the reduction of N₂ is a crucial step. In this work, BiVO₄ decorated with amorphous MnCO₃/C double layers has been successfully synthesized by a one-step method for the first time. The C and MnCO₃ have been formed as ultrathin film, which enables the establishment of a uniform and tight interface with BiVO₄. The temperature-programmed desorption of N₂ (N₂-TPD) spectra confirmed that the MnCO₃/C could endow BiVO₄ with a drastic enhancement of the chemical absorption ability of a N₂ molecule compared with the pristine BiVO₄. Meanwhile, the method of isotope labeling proved that the catalyst exhibited excellent selectivity for the photocatalytic nitrogen reduction reaction (NRR). The production rate of NH₃ up to 2.426 mmol m^-2 h^-1 has been achieved over the BiVO₄/MnCO₃/C, which is almost 8 times that of pristine BiVO₄. The promoted production rate of NH₃ over BiVO₄/MnCO₃/C could be mainly attributed to the cooperative process between MnCO₃ and C amorphous layers. Therefore, this work could provide an alternative insight to understand the NRR process based on the model of a hierarchical amorphous structure.

Recent development of two-dimensional metal-organic framework derived electrocatalysts for hydrogen and oxygen electrocatalysis

Developing efficient and low-cost electrocatalysts with unique nanostructures is of great significance for improved electrocatalytic reactions, including the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). Two-dimensional (2D) metal-organic frameworks (MOFs) have attracted recent attention because of their unique dimension-related properties, such as ultrathin thickness, large specific surface area, and abundant accessible active sites that can act as good precursors for the derivation of a variety of nanocomposites as active materials in electrocatalysis and energy-related devices. In this review, we present recent developments in 2D MOF-derived nanomaterials for hydrogen and oxygen reactions in overall water-splitting and rechargeable Zn-air batteries. The advantages of various synthetic strategies are summarized and discussed in detail. Finally, we discuss the main challenges and future perspectives of the development of 2D MOF-derived electrocatalysts.

Reconstruction of pH-universal atomic FeNC catalysts towards oxygen reduction reaction

Constructing of single atom catalysts that can stably exist in various energy conversion and storage devices is still in its infancy. Herein, a geometrically optimized three-dimensional hierarchically architectural single atomic FeNC catalyst with fast mass transport and electron transfer is rationally developed by post-molecule pyrolysis assisted with silicon template and reconstructs by ammonia treating. The ammonia-assisted secondary pyrolysis not only compensates for the volatilization of nitrogen species contained in organic precursors but also optimizes the surface structure of FeNC catalyst, thus increasing the content of pyridinic nitrogen and boosting the density of active sites (FeN_x) in FeNC samples. In addition, the pyridinic nitrogen adjusts the electronic distribution in Fe 3d active center and promotes the catalytic performances. Therefore, this hollow spherical atomically dispersed FeNC catalyst delivers outstanding oxygen reduction reaction (ORR) activity in pH-universal electrolyte and surpasses the most reported values.

Active Sites in Single-Atom Fe-Nx-C Nanosheets for Selective Electrochemical Dechlorination of 1,2-Dichloroethane to Ethylene

Electrochemical dechlorination of 1,2-dichloroethane (DCE) is one of the prospective and economic strategies for the preparation of high-value ethylene. However, the exploration of advanced electrocatalysts with high reactivity and selectivity and the identification of their active sites are still a challenge. Herein, a single-atom (SA) Fe-N_x-C nanosheet with the presence of a highly efficient Fe-N₄ coordination pattern is reported. The as-prepared single-atom electrocatalyst exhibits a higher reactivity and ethylene selectivity for DCE dechlorination reaction than those of the commercially adopted 20% Pt-C catalyst. By a combination of experiments and theoretical calculations, the atomically dispersed Fe center in the Fe-N₄ structure was unveiled to be the dominating active site for electrochemical production of ethylene. Our work would offer an approach for the rational development of SA materials and supply crucial insight into the mechanism of ethylene production through the DCE dechlorination reaction.

Graphene-Like Layers from Carbon Black: In Vivo Toxicity Assessment

Graphene-like (GL) layers, a new graphene-related material (GRM), possess peculiar chemical, colloidal, optical and transport properties. Considering the very recent promising application of GL layers in biomedical and bioelectronic fields, it is of utmost importance to investigate the toxicological profile of these nanomaterials. This study represents an important first report of a complete in vivo toxicity assessment of GL layers on embryonic zebrafish (Danio rerio). Our results show that GL layers do not lead to any perturbations in the different biological parameters evaluated, indicating their good biocompatibility on a vertebrate model. The new insight into the biosafety of GL layers will expand their applications in nanomedicine.

Peasecod-Like Hollow Upconversion Nanocrystals with Excellent Optical Thermometric Performance

Trivalent lanthanide (Ln3+)-doped hollow upconversion nanocrystals (UCNCs) usually exhibit unique optical performance that cannot be realized in their solid counterparts, and thus have been receiving tremendous interest from their fundamentals to diverse applications. However, all currently available Ln3+-doped UCNCs are solid in appearance, the preparation of hollow UCNCs remains nearly untouched hitherto. Herein, a class of UCNCs based on Yb3+/Er3+-doped tetralithium zirconium octafluoride (Li4ZrF8:Yb/Er) featuring 2D layered crystal lattice is reported, which makes the fabrication of hollow UCNCs with a peasecod-like shape possible after Ln3+ doping. By employing the first-principle calculations, the unique peasecod-like hollow nanoarchitecture primarily associated with the hetero-valence Yb3+/Er3+ doping into the 2D layered crystal lattice of Li4ZrF8 matrix is revealed. Benefiting from this hollow nanoarchitecture, the resulting Li4ZrF8:Yb/Er UCNCs exhibit an abnormal green upconversion luminescence in terms of the population ratio between two thermally coupled states (2H11/2 and 4S3/2) of Er3+ relative to their solid Li2ZrF6:Yb/Er counterparts, thereby allowing to prepare the first family of hollow Ln3+-doped UCNCs as supersensitive luminescent nanothermometer with almost the widest temperature sensing range (123-800 K). These findings described here unambiguously pave a new way to fabricate hollow Ln3+-doped UCNCs for numerous applications.

Ionic Polyimide Derived Porous Carbon Nanosheets as High-Efficiency Oxygen Reduction Catalysts for Zn-Air Batteries

Two-dimensional (2D) porous carbon nanosheets (2DPCs) have attracted great attention for their good porosity and long-distance conductivity. Factors such as templates, precursors, and carbonization-activation methods, directly determine their performance. However, rational design and preparation of porous carbon materials with controlled 2D morphology and heteroatom dopants remains a challenge. Therefore, an ionic polyimide with both sp² - and sp³ -hybridized nitrogen atoms was prepared as a precursor for fabricating N-doped hexagonal porous carbon nanosheets through a hard-template approach. Because of the large surface area and efficient charge-mass transport, the resulting activated 2D porous carbon nanosheets (2DPCs-a) displayed promising electrocatalytic properties for oxygen reduction reaction (ORR) in alkaline and acidic media, such as ultralow half-wave potential (0.83 vs. 0.84 V of Pt/C) and superior limiting current density (5.42 vs. 5.14 mA cm^-2 of Pt/C). As air cathodes in Zn-air batteries, the as-developed 2DPCs-a exhibited long stability and high capacity (up to 614 mA h g^-1 ), which are both higher than those of commercial Pt/C. This work provides a convenient method for controllable and scalable 2DPCs fabrication as well as new opportunities to develop high-efficiency electrocatalysts for ORR and Zn-air batteries.

Intercalation of Carbon Nanosheet into Layered TiO2 Grain for Highly Interfacial Lithium Storage

Interfacial energy storage contributes a new mechanism to the emergence of energy storage devices with not only a high-energy density of batteries but also a high-power density of capacitors. In this study, success was achieved in preparing a highly ordered two-dimensional (2D) carbon/TiO₂ (C/TiO₂) nanosheet composite using commercially available organic molecules with multifunctional groups and taking advantage of the wedge effects, oxidative polymerization, and carbonization. An experiment was conducted to validate the excellent performance of this 2D composite with respect to interfacial energy storage. The coin cell with 2D C/TiO₂ nanosheet composite demonstrates a specific capacity of as high as 510 mAh g^-1 and a high specific energy of 390.9 Wh kg^-1 at a specific power of 75.9 W kg^-1 with a current density of 0.1 A g^-1, and it also remains 39.0 Wh kg^-1 at a specific power of 8.2 kW kg^-1 with a high current density of 12.8 A g^-1. The excellent electrochemical performance can be attributed to the superior artificial interface capacitive Li⁺ storage capability, which would bridge the energy and power density gap between batteries and capacitors. Meanwhile, there are two varieties of carbon derivatives, 2D carbon nanosheet stacks and exfoliated carbon nanosheets, which can be obtained by wet-chemical etching and mechanical peeling. The experimental route is simple from commercially available raw materials, and it could be scalable at a low cost and large scale, which makes it suitable for application in various fields such as energy storage, nanocatalysis, sensors, and so on.

Ultrasmall 2 D Cox Zn2-x (Benzimidazole)4 Metal-Organic Framework Nanosheets and their Derived Co Nanodots@Co,N-Codoped Graphene for Efficient Oxygen Reduction Reaction

The development of nonprecious metal-nitrogen-carbon (M-N-C) materials with efficient metal utilization and abundant active sites for the oxygen reduction reaction (ORR) is of great significance for fuel cells and metal-air batteries. Ultrasmall 2 D Co_x Zn_2-x (benzimidazole)₄ [Co_x Zn_2-x (bim)₄ ] bimetallic metal-organic framework (MOF) nanosheets (≈2 nm thick) are synthesized by a novel bottom-up strategy and then thermally converted into a core-shell structure of sub-5 nm Co nanodots (NDs) wrapped with 2 to 5 layers of Co,N-codoped graphene (Co@FLG). The size of the Co NDs in Co@FLG could be precisely controlled by the Co/Zn ratio in the Co_x Zn_2-x (bim)₄ nanosheet. As an ORR electrocatalyst, the optimized Co@FLG exhibits an excellent half-wave potential of 0.841 V (vs. RHE), a high limiting current density of 6.42 mA cm^-2 , and great stability in alkaline electrolyte. Co@FLG also has great ORR performance in neutral electrolyte, as well as in Mg-air batteries. The experimental studies and DFT calculations reveal that the high performance of Co@FLG is mainly attributed to its great O₂ absorptivity, which is endowed by the abundant Co-N_x and pyridinic-N in the FLG shell and the strong electron-donating ability from the Co ND core to the FLG shell. This elevates the e_g orbital energy of Co^II and lowers the activation energy for breaking the O=O/O-O bonds. This work sheds light on the design and fabrication of 2 D MOFs and MOF-derived M-N-C materials for energy storage and conversion applications.

Two-dimensional metal-organic frameworks and their derivatives for electrochemical energy storage and electrocatalysis

Two-dimensional (2D) metal-organic frameworks (MOFs) and their derivatives with excellent dimension-related properties, e.g. high surface areas, abundantly accessible metal nodes, and tailorable structures, have attracted intensive attention as energy storage materials and electrocatalysts. A major challenge on the road toward the commercialization of 2D MOFs and their derivatives is to achieve the facile and controllable synthesis of 2D MOFs with high quality and at low cost. Significant developments have been made in the synthesis and applications of 2D MOFs and their derivatives in recent years. In this review, we first discuss the state-of-the-art synthetic strategies (including both top-down and bottom-up approaches) for 2D MOFs. Subsequently, we review the most recent application progress of 2D MOFs and their derivatives in the fields of electrochemical energy storage (e.g., batteries and supercapacitors) and electrocatalysis (of classical reactions such as the HER, OER, ORR, and CO2RR). Finally, the challenges and promising strategies for the synthesis and applications of 2D MOFs and their derivatives are addressed for future development.

MOF-derived two-dimensional N-doped carbon nanosheets coupled with Co-Fe-P-Se as efficient bifunctional OER/ORR catalysts

Developing highly efficient, low-cost and bifunctional electrocatalysts for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) plays a pivotal role in the scalable applications of zinc-air (Zn-air) batteries. Herein, Co-Fe-P-Se nanoparticles supported on two-dimensional nitrogen-doped carbon (Co-Fe-P-Se/NC) to construct a three-dimensional nanostructure were obtained under the assistance of metal-organic frameworks (MOFs). The two-dimensional nanosheet facilitated the electron transfer rate and exposed abundant active sites. The three-dimensional morphology composed of nanosheets was favorable for electrolyte transport and provided abundant channels for gas diffusion during the catalytic process. Moreover, the coexistence of Co and Fe had important effects on promoting the catalytic performances. Lastly, the catalytic performances for OER and ORR could be promoted effectively after the introduction of selenium and phosphorous in the designed electrocatalyst. Benefiting from the above merits, the prepared Co-Fe-P-Se/NC exhibited excellent catalytic performances for OER (overpotential of 0.27 V at 10 mA cm^-2), ORR (half-wave potential of 0.76 V) and rechargeable batteries (a low voltage gap of 0.719 V, high power density of 104 mW cm^-2 at 200 mA cm^-2 and high energy density of 805 W h Kg_Zn^-1). Moreover, the prepared electrocatalyst possessed more stable long-term stability in all the conducted experiments. This work provides a novel approach to develop and construct high-performance bifunctional nanocatalysts for metal-air batteries.

Scalable Synthesis of Micromesoporous Iron-Nitrogen-Doped Carbon as Highly Active and Stable Oxygen Reduction Electrocatalyst

Micromesoporous metal-nitrogen-doped carbons have attracted incremental attention owning to their high activities for the electrocatalyzing oxygen reduction reaction (ORR). However, scalable synthesis of micromesoporous metal-nitrogen-doped carbons having superior electrocatalytic activity and stability remains a challenge. Here, an iron-nitrogen-doped carbon with highly electrocatalytic properties was simply prepared by ZnCl₂ activation of an in situ polymerized iron-containing polypyrrole (PPy@FeCl_x) at high temperature. High yields of polypyrrole (∼98 wt %) and iron-nitrogen-doped carbon (∼47 wt %) could be reached. The eutectic state of FeCl_x-ZnCl₂ and its derived ZnFe₂O₄ maskant played important roles in making micromesopores, scattering iron atoms, and trapping nitrogen atoms, leading to numerous micromesopore defects, a larger specific surface area, a more nitrogen doping content, and active sites for the material. The electrochemical tests and Zn-air battery measurements showed that the micromesoporous iron-nitrogen-doped carbon could achieve much positive onset and half-wave potentials at 0.98 and 0.90 V, respectively, as well as a large current density (6.06 mA/cm²) and good cycling stability. The combination of the iron-nitrogen doping and micromesopore defects by the eutectic salt activation method provided an effective way to scalable synthesize iron-nitrogen-doped carbon as highly active and stable oxygen reduction electrocatalytsts.

Boosting the hydrogen evolution activity of a Co-N-C electrocatalyst by codoping with Al

Co, Al and N tri-doped graphene (CANG) was successfully fabricated via annealing N-doped graphene with Co and Al precursors. The material was characterized by scaning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, physical adsorption, and X-ray photoelectron spectroscopy (XPS). It was found that the as-prepared CANG features a robust three-dimensional hierarchically porous structure. The contents of Co and Al can achieve the maximum value of 2.18 at% and 0.51 at% at the annealing temperature of 950 °C. Upon using the electrocatalyst for the hydrogen evolution reaction (HER), the CANG exhibited remarkable electrocatalytic performance in both acidic (η 10 = 105 mV) and alkaline media (η 10 = 270 mV), and outperforms Co,N-codoped graphene and Al,N-codoped graphene, respectively. In combination with the density functional theory (DFT) calculations, it was revealed that the introduction of the Al heteroatom can decrease the absolute value of hydrogen adsorption free energy (ΔG(H*)) of Co-N-C catalysts, thus greatly enhancing the HER activity. This discovery will provide new guidance to the design of advanced and inexpensive carbon materials for fuel cell, water-splitting and other electrochemical devices.

Augmenting Intrinsic Fenton-Like Activities of MOF-Derived Catalysts via N-Molecule-Assisted Self-catalyzed Carbonization

To overcome the ever-growing organic pollutions in the water system, abundant efforts have been dedicated to fabricating efficient Fenton-like carbon catalysts. However, the rational design of carbon catalysts with high intrinsic activity remains a long-term goal. Herein, we report a new N-molecule-assisted self-catalytic carbonization process in augmenting the intrinsic Fenton-like activity of metal-organic-framework-derived carbon hybrids. During carbonization, the N-molecules provide alkane/ammonia gases and the formed iron nanocrystals act as the in situ catalysts, which result in the elaborated formation of carbon nanotubes (in situ chemical vapor deposition from alkane/iron catalysts) and micro-/meso-porous structures (ammonia gas etching). The obtained catalysts exhibited with abundant Fe/Fe-Nx/pyridinic-N active species, micro-/meso-porous structures, and conductive carbon nanotubes. Consequently, the catalysts exhibit high efficiency toward the degradation of different organic pollutions, such as bisphenol A, methylene blue, and tetracycline. This study not only creates a new pathway for achieving highly active Fenton-like carbon catalysts but also takes a step toward the customized production of advanced carbon hybrids for diverse energy and environmental applications.

Paper-based microfluidic aluminum-air batteries: toward next-generation miniaturized power supply

Paper-based microfluidics (lab on paper) emerges as an innovative platform for building small-scale devices for sensing, diagnosis, and energy storage/conversions due to the power-free fluidic transport capability of paper via capillary action. Herein, we report for the first time that paper-based microfluidic concept can be employed to fabricate high-performing aluminum-air batteries, which entails the use of a thin sheet of fibrous capillary paper sandwiched between an aluminum foil anode and a catalyst coated graphite foil cathode without using any costly air electrode or external pump device for fluid transport. The unique microfluidic configuration can help overcome the major drawbacks of conventional aluminum-air batteries including battery self-discharge, product-induced electrode passivation, and expensive and complex air electrodes which have long been considered as grand obstacles to aluminum-air batteries penetrating the market. The paper-based microfluidic aluminum-air batteries are not only miniaturized in size, easy to fabricate and cost-effective, but they are also capable of high electrochemical performance. With a specific capacity of 2750 A h kg-1 (@20 mA cm-2) and an energy density of 2900 W h kg-1, they are 8.3 and 12.6 times higher than those of the non-fluidic counterpart and significantly outperform many other miniaturized energy sources, respectively. The superior performance of microfluidic aluminum-air batteries originates from the remarkable efficiency of paper capillarity in transporting electrolyte along with O2 to electrodes.

Binder-Free Modification of a Glassy Carbon Electrode by Using Porous Carbon for Voltammetric Determination of Nitro Isomers

In this study, Liquidambar formosana tree leaves have been used as a renewable biomass precursor for preparing porous carbons (PCs). The PCs were produced by pyrolysis of natural waste of leaves after 10% KOH activation under a nitrogen atmosphere and characterized by a variety of state-of-the-art techniques. The PCs possess a large surface area, micro-/mesoporosity, and functional groups on its surface. A glassy carbon electrode modified with high PCs was explored as an efficient binder-free electrocatalyst material for the voltammetric determination of nitro isomers such as 3-nitroaniline (3-NA) and 4-nitroaniline (4-NA). Under optimal experimental conditions, the electrochemical detection of 3-NA and 4-NA was found to have a wide linear range of 0.2-115.6 and 0.5-120 μM and a low detection limit of 0.0551 and 0.0326 μM, respectively, with appreciable selectivity. This route not only enhanced the benefit from biomass wastes but also reduced the cost of producing electrode materials for electrochemical sensors. Additionally, the sensor was successfully applied in the determination of nitro isomers even in the presence of other common electroactive interference and real samples analysis (beverage and pineapple jam solutions). Therefore, the proposed method is simple, rapid, stable, sensitive, specific, reproducible, and cost-effective and can be applicable for real sample detection.

A room-temperature interfacial approach towards iron/nitrogen co-doped fibrous porous carbons as electrocatalysts for the oxygen reduction reaction and Zn-Air batteries

The development of nonprecious and efficient catalysts to boost the oxygen reduction reaction (ORR) is imperative. However, the majority of previously reported approaches suffered from a complicated fabrication procedure, both time consuming and difficult to scale up. Herein, large-scale iron ion embedded polyaniline fibers were successfully fabricated as precursors for preparing iron/nitrogen co-doped fibrous porous carbons (Fe/NPCFs) through an interfacial engineering strategy at room temperature. As ORR electrocatalysts in an alkaline medium (0.1 M KOH), Fe/NPCFs display a positive half-wave potential of 0.827 V (vs. RHE), and high limited current density (up to 5.76 mA cm-2), which are better than those of commercial Pt/C (E1/2 = 0.815 V, JL = 5.47 mA cm-2). Also, Fe/NPCFs exhibit a high ORR catalysis activity (E1/2 = 0.632 V, JL = 5.07 mA cm-2) in acidic medium (0.5 M H2SO4). When used as an air cathode in a primary Zn-air battery, high power density (158.5 mW cm-2) and specific capacity (717.8 mA h g-1) can be easily achieved, outperforming the commercial Pt/C.

Metal-Organic-Framework-Derived 2D Carbon Nanosheets for Localized Multiple Bacterial Eradication and Augmented Anti-infective Therapy

Recently emerging graphene-based 2D nanoplatforms with multiple therapeutic modalities provide enormous opportunities to combat pathogenic bacterial infections. However, because these materials suffer from complicated synthesis, massive dosage requirements, and abundant nonlocalized heat, much more simplified, tunable, and localized eradication approaches are urgently required. Herein, we report on the fabrication of the metal-organic-framework (MOF)-derived 2D carbon nanosheets (2D-CNs) with phase-to-size transformation and localized bacterial eradication capabilities for augmented anti-infective therapy. The MOF-derived, ZnO-doped carbon on graphene (ZnO@G) is first synthesized and then anchored with phase transformable thermally responsive brushes (TRB) by in situ polymerization to yield the TRB-ZnO@G. The TRB-ZnO@G exhibits flexible 2D nanostructures, high photothermal activities, sustained Zn²⁺ ions release, and ON-OFF switchable phase-to-size transformation abilities. Notably, the near-infrared-triggered formation of TRB-ZnO@G-bacteria aggregations enables localized massive Zn²⁺ ions penetration, physical cutting, and hyperthermia killing, which synergistically enhance the disruption of bacterial membranes and intracellular substances. The obtained novel 2D-CNs not only present robust and localized multiple bacterial eradication capabilities with nearly 100% bactericidal efficiency at low concentrations but also possess rapid and safe skin wound disinfection via a short-time photothermal treatment without damaging normal skin tissues or causing accumulative toxicities, thus presenting great potential for broad-spectrum eradication of pathogenic bacteria.

From fluorene molecules to ultrathin carbon nanonets with an enhanced charge transfer capability for supercapacitors

It is a big challenge to synthesize ultrathin carbon nanonets with an enhanced charge transfer capability for high-performance energy storage devices. Herein, ultrathin carbon nanonets (UCNs) were successfully synthesized for the first time from fluorene, a typical aromatic molecule, by a template strategy for supercapacitors. The formation mechanism of UCNs was determined using Density Functional Theory and Materials Studio, in which the fluorene-derived radicals were assembled into UCNs in the template-confinement space with the assistance of KOH. The as-made UCNs feature interconnected high-conductivity net-like architectures with enhanced charge transfer capability, evidenced by their high capacitance, excellent rate performance and cycling stability for symmetrical supercapacitors in a KOH electrolyte. This finding may provide a significant step forward in understanding the formation mechanism of graphene-like materials from more complicated aromatic hydrocarbon molecules, and our work may draw wide attention in the fields of aromatic chemistry and carbon-based energy storage materials.