Complex Hydrides for Energy Storage, Conversion, and Utilization

Inducing One-Step Dehydrogenation of Magnesium Borohydride via Confinement in Robust Dodecahedral Nitrogen-Doped Porous Carbon Scaffold

A dodecahedral activated N-doped porous carbon scaffold is synthesized and used for the nanoconfinement of Mg(BH4)2. The optimized mesoporous scaffold possesses an accumulated pore width of 2.65 nm, high specific surface area (3955.9 m2 g-1), and large pore volume (2.15 cm3 g-1), providing ample space for the confinement of Mg(BH4)2 particles and numerous surface active sites for interactions with the same. The confined Mg(BH4)2 system features a dehydrogenation onset temperature of 81.5 °C, an extremely high capacity of 10.2 wt% H2, and an almost single-step dehydrogenation profile. Moreover, the system exhibits superior capacity retention of 82.7% after 20 cycles at a moderate temperature of 250 °C. Precise activation control enables a transformation from microporous carbon materials to mesoporous ones, and hence the efficient nanoconfinement of Mg(BH4)2 and realization of one-step dehydrogenation. The evolution of borohydride intermediates is systematically revealed throughout the cycling process. Density functional theory calculations demonstrate defective N heteroatoms within the scaffold are vital in reducing the strength of B─H bonds, and the N-doped carbon can facilitate decomposition of the irreversible MgB12H12 intermediate. This study opens up new avenues for designing robust carbon scaffolds doped with heteroatoms and analyzing intermediate evolution in nanoconfined Mg-based borohydride systems.

Sodium Octahydridotriborate as a Solid Electrolyte with Excellent Stability Against Sodium-Metal Anode

Solid-state sodium metal batteries have been extensively investigated because of their potential to improve safety, cost-effectiveness, and energy density. The development of such batteries urgently required a solid-state electrolyte with fast Na-ion conduction and favorable interfacial compatibility. Herein, the progress on developing the NaB3H8 solid-state electrolytes is reported, which show a liquid-like ionic conductivity of 0.05 S cm-1 at 56 °C with an activation energy of 0.35 eV after an order-disorder phase transformation, matching or surpassing the best single-anion hydridoborate conductors investigated up to now. The steady polarization voltage and significantly decreased resistance are achieved in the symmetric Na/NaB3H8/Na cell, indicating the great electrochemical stability and favorable interfacial contact with the Na metal of NaB3H8. Furthermore, a Na/NaB3H8/TiS2 battery, the first high-rate (up to 1 C) solid-state sodium metal battery using the single-anion hydridoborate electrolyte, is demonstrated, which exhibits superior rate capability (168.2 mAh g-1 at 0.1 C and 141.2 mAh g-1 at 1 C) and long-term cycling stability (70.9% capacity retention at 1 C after 300 cycles) at 30 °C. This work may present a new possibility to solve the interfacial limitations and find a new group of solid-state electrolytes for high-performance sodium metal batteries.

Light-Driven De/Rehydrogenation of a LiH Surface under Ambient Conditions

Lithium hydride (LiH), a saline hydride with a hydrogen density of 12.6 wt %, is highly thermostable, which hinders its extensive application in hydrogen storage. In this study, we demonstrate a distinct photodecomposition of LiH under ambient conditions. Ultraviolet-visible (UV-vis) illumination induces hydrogen release and creates surface hydrogen vacancies on LiH. The subsequent H- migration enables hydrogen desorption and the accumulation of vacancies at the subsurface, resulting in the generation of metallic Li clusters. Rehydrogenation, on the contrary, can be charged under UV-vis illumination in 1 bar H2. Such phenomena show that the thermodynamic and kinetic limits in the re/dehydrogenation of LiH can be broken under illumination, which allows hydrogen storage over the LiH surface at temperatures ∼600 K lower than those of the corresponding thermal process. This work provides new insights into the interaction of semiconducting hydrides and photons and opens an avenue for the development and optimization of materials for hydrogen storage and related photodriven reactions.

In Situ Construction of Interface with Photothermal and Mutual Catalytic Effect for Efficient Solar-Driven Reversible Hydrogen Storage of MgH2

Hydrogen storage in MgH2 is an ideal solution for realizing the safe storage of hydrogen. High operating temperature, however, is required for hydrogen storage of MgH2 induced by high thermodynamic stability and kinetic barrier. Herein, flower-like microspheres uniformly constructed by N-doped TiO2 nanosheets coated with TiN nanoparticles are fabricated to integrate the light absorber and thermo-chemical catalysts at a nanometer scale for driving hydrogen storage of MgH2 using solar energy. N-doped TiO2 is in situ transformed into TiNxOy and Ti/TiH2 uniformly distributed inside of TiN matrix during cycling, in which TiN and Ti/TiHx pairs serve as light absorbers that exhibit strong localized surface plasmon resonance effect with full-spectrum light absorbance capability. On the other hand, it is theoretically and experimentally demonstrated that the intimate interface between TiH2 and MgH2 can not only thermodynamically and kinetically promote H2 desorption from MgH2 but also simultaneously weaken Ti─H bonds and hence in turn improve H2 desorption from the combination of weakened Ti─H and Ti─H bonds. The uniform integration of photothermal and catalytic effect leads to the direct action of localized heat generated from TiN on initiating the catalytic effect in realizing hydrogen storage of MgH2 with a capacity of 6.1 wt.% under 27 sun.

Exceptional Hydrogen Uptake in Crystalline InxGa1-xN Semiconductors

The irradiation of InN and InxGa1-xN samples with low-energy H ions results in exceptionally high hydrogen uptake in a crystalline semiconductor. This phenomenon is attributed to specific In-H complex formation. By exploiting spectral fingerprints of the In-H complexes observable in In L3-edge X-ray absorption spectroscopy, we provide direct evidence of complex formation. Density functional theory calculations assist in interpreting the X-ray absorption spectra and offer insights into the energetics of complex formation. We quantify the total amount of reversibly incorporated hydrogen in these semiconductors and discuss their strengths and weaknesses as innovative materials for hydrogen storage.

Interfacial Engineering of Fluorinated TiO2 Nanosheets with Abundant Oxygen Vacancies for Boosting the Hydrogen Storage Performance of MgH2

The interaction between fluorinated surface in the partially reduced nano-crystallite titanium dioxide (TiO2-x(F)) and MgH2 is studied for the first time. Compared with pristine MgH2 (416 °C), the onset desorption temperature of MgH2+5 wt.% TiO2-x(F) composite can be dramatically lowered to 189 °C. In addition, the composite exhibits remarkable dehydrogenation kinetics, which can release 6.0 wt.% hydrogen thoroughly within 6 min at 250 °C. The apparent activation energy for dehydriding is decreased from 268.42 to 119.96 kJ mol-1. Structural characterization and theoretical calculations indicate that the synergistic effect between multivalent Ti species, and the in situ formed MgF2 and MgF2-xHx is beneficial for improving the hydrogen storage performance of MgH2. Moreover, oxygen vacancies can accelerate the electron transportation and facilitate hydrogen diffusion. The study provides a novel perspective on the modification of MgH2 by fluorinated transition metal oxide catalyst.

A High-Rate and Long-Life Sodium Metal Battery Based on a NaB3H8 ⋅ xNH3@NaB3H8 Composite Solid-State Electrolyte

All-solid-state sodium metal batteries are promising for large-scale energy storage applications owing to their intrinsic safety and cost-effectiveness. However, they generally suffer from sodium dendrite growth or rapid capacity fading, especially at high rates, mainly due to poor wettability, sluggish ionic transport, or low interfacial stability of the solid electrolytes. Herein, we report a novel composite, NaB3H8 ⋅ xNH3@NaB3H8 (x<1), as a new class of solid electrolyte for high-rate batteries. NaB3H8 ⋅ xNH3@NaB3H8 is obtained from the sticky NaB3H8 ⋅ NH3 after removal of NH3 partially at room temperature. It delivers an ionic conductivity of 0.84 mS cm-1 at 25 °C and reaches 20.64 mS cm-1 at 45 °C after an order-disorder phase transformation. It also reveals a good capability of dendrite suppression and remarkable stability against sodium metal. These performances enable the all-solid-state Na//TiS2 battery with a high capacity of 232.4 mAh g-1 (97.2 % of theoretical capacity) and long-term cycling stability at 1 C. Notably, this battery shows superior long-life cycling stability even at 5 and 10 C, which has been rarely reported in all-solid-state sodium metal batteries. This work opens a new group of solid electrolytes, contributing to fast-charging or high-power-density sodium metal batteries.

Atomic reconstruction for realizing stable solar-driven reversible hydrogen storage of magnesium hydride

Reversible solid-state hydrogen storage of magnesium hydride, traditionally driven by external heating, is constrained by massive energy input and low systematic energy density. Herein, a single phase of Mg2Ni(Cu) alloy is designed via atomic reconstruction to achieve the ideal integration of photothermal and catalytic effects for stable solar-driven hydrogen storage of MgH2. With the intra/inter-band transitions of Mg2Ni(Cu) and its hydrogenated state, over 85% absorption in the entire spectrum is achieved, resulting in the temperature up to 261.8 °C under 2.6 W cm-2. Moreover, the hydrogen storage reaction of Mg2Ni(Cu) is thermodynamically and kinetically favored, and the imbalanced distribution of the light-induced hot electrons within CuNi and Mg2Ni(Cu) facilitates the weakening of Mg-H bonds of MgH2, enhancing the "hydrogen pump" effect of Mg2Ni(Cu)/Mg2Ni(Cu)H4. The reversible generation of Mg2Ni(Cu) upon repeated dehydrogenation process enables the continuous integration of photothermal and catalytic roles stably, ensuring the direct action of localized heat on the catalytic sites without any heat loss, thereby achieving a 6.1 wt.% H2 reversible capacity with 95% retention under 3.5 W cm-2.

Hydrogen production, storage, and transportation: recent advances

One such technology is hydrogen-based which utilizes hydrogen to generate energy without emission of greenhouse gases. The advantage of such technology is the fact that the only by-product is water. Efficient storage is crucial for the practical application of hydrogen. There are several techniques to store hydrogen, each with certain advantages and disadvantages. In gaseous hydrogen storage, hydrogen gas is compressed and stored at high pressures, requiring robust and expensive pressure vessels. In liquid hydrogen storage, hydrogen is cooled to extremely low temperatures and stored as a liquid, which is energy-intensive. Researchers are exploring advanced materials for hydrogen storage, including metal hydrides, carbon-based materials, metal-organic frameworks (MOFs), and nanomaterials. These materials aim to enhance storage capacity, kinetics, and safety. The hydrogen economy envisions hydrogen as a clean energy carrier, utilized in various sectors like transportation, industry, and power generation. It can contribute to decarbonizing sectors that are challenging to electrify directly. Hydrogen can play a role in a circular economy by facilitating energy storage, supporting intermittent renewable sources, and enabling the production of synthetic fuels and chemicals. The circular economy concept promotes the recycling and reuse of materials, aligning with sustainable development goals. Hydrogen availability depends on the method of production. While it is abundant in nature, obtaining it in a clean and sustainable manner is crucial. The efficiency of hydrogen production and utilization varies among methods, with electrolysis being a cleaner but less efficient process compared to other conventional methods. Chemisorption and physisorption methods aim to enhance storage capacity and control the release of hydrogen. There are various viable options that are being explored to solve these challenges, with one option being the use of a multilayer film of advanced metals. This work provides an overview of hydrogen economy as a green and sustainable energy system for the foreseeable future, hydrogen production methods, hydrogen storage systems and mechanisms including their advantages and disadvantages, and the promising storage system for the future. In summary, hydrogen holds great promise as a clean energy carrier, and ongoing research and technological advancements are addressing challenges related to production, storage, and utilization, bringing us closer to a sustainable hydrogen economy.

Experimentally validated design principles of heteroatom-doped-graphene-supported calcium single-atom materials for non-dissociative chemisorption solid-state hydrogen storage

Non-dissociative chemisorption solid-state storage of hydrogen molecules in host materials is promising to achieve both high hydrogen capacity and uptake rate, but there is the lack of non-dissociative hydrogen storage theories that can guide the rational design of the materials. Herein, we establish generalized design principle to design such materials via the first-principles calculations, theoretical analysis and focused experimental verifications of a series of heteroatom-doped-graphene-supported Ca single-atom carbon nanomaterials as efficient non-dissociative solid-state hydrogen storage materials. An intrinsic descriptor has been proposed to correlate the inherent properties of dopants with the hydrogen storage capability of the carbon-based host materials. The generalized design principle and the intrinsic descriptor have the predictive ability to screen out the best dual-doped-graphene-supported Ca single-atom hydrogen storage materials. The dual-doped materials have much higher hydrogen storage capability than the sole-doped ones, and exceed the current best carbon-based hydrogen storage materials.

Nanoscale engineering of solid-state materials for boosting hydrogen storage

The development of novel materials capable of securely storing hydrogen at high volumetric and gravimetric densities is a requirement for the wide-scale usage of hydrogen as an energy carrier. In recent years, great efforts via nanoscale tuning and designing strategies on both physisorbents and chemisorbents have been devoted to improvements in their thermodynamic and kinetic aspects. Increasing the hydrogen storage capacity/density for physisorbents and chemisorbents and improving the dehydrogenation kinetics of hydrides are still considered a challenge. The extensive and fast development of advanced nanotechnologies has fueled a surge in research that presents huge potential in designing solid-state materials to meet the ultimate U.S. Department of Energy capacity targets for onboard light-duty vehicles, material-handling equipments, and portable power applications. Different from the existing literature, in this review, particular attention is paid to the recent advances in nanoscale engineering of solid-state materials for boosting hydrogen storage, especially the nanoscale tuning and designing strategies. We first present a short overview of hydrogen storage mechanisms of nanoscale engineering for boosted hydrogen storage performance on solid-state materials, for example, hydrogen spillover, nanopump effect, nanosize effect, nanocatalysis, and other non-classical hydrogen storage mechanisms. Then, the focus is on recent advancements in nanoscale engineering strategies aimed at enhancing the gravimetric hydrogen storage capacity of porous materials, reducing dehydrogenation temperature and improving reaction kinetics and reversibility of hydrogen desorption/absorption for metal hydrides. Effective nanoscale tuning strategies for enhancing the hydrogen storage performance of porous materials include optimizing surface area and pore volume, fine-tuning nanopore sizes, introducing nanostructure doping, and crafting nanoarchitecture and nanohybrid materials. For metal hydrides, successful strategies involve nanoconfinement, nanosizing, and the incorporation of nanocatalysts. This review further addresses the points to future research directions in the hope of ushering in the practical applications of hydrogen storage materials.

Chemical Looping Technology in Mild-Condition Ammonia Production: A Comprehensive Review and Analysis

Ammonia is an efficient and clean hydrogen carrier that promises to tackle the increasing energy and environmental problems. However, more than 90% of ammonia is produced by the Haber-Bosch process, and its enormous energy consumption and CO2 emissions require the development of novel alternatives. Chemical looping technology can decouple the one-step ammonia synthesis reaction into separated nitridation and hydrogenation processes at atmospheric pressure, thereby achieving the mild ammonia synthesis based on renewable energy. The strategy of stepwise reactions circumvents the problem of competing adsorption of N2 and H2 /H2 O at the active sites and provides additive freedom for optimal regulation of sub-reactions. This review introduces the concept and mechanism of chemical looping ammonia production (CLAP), and comprehensively summarizes the state-of-art research from the perspective of reaction pathways and nitrogen carriers. The challenges faced by CLAP and strategies to address them in terms of nitrogen carriers, methods, equipment, and technological processes are also proposed.

Storing electrons from H2 for transfer to CO2, all at room temperature

We present an Ir complex that extracts electrons from H2 at room temperature and stores them as a H2-derived energy carrier (H2EC) at room temperature. Furthermore, we demonstrate that this complex reduces CO2 to a metal-CO22- species at room temperature, and present the first electrospray ionisation mass spectrum for this compound.

Recent progress and strategic perspectives of inorganic solid electrolytes: fundamentals, modifications, and applications in sodium metal batteries

Solid-state electrolytes (SEs) have attracted overwhelming attention as a promising alternative to traditional organic liquid electrolytes (OLEs) for high-energy-density sodium-metal batteries (SMBs), owing to their intrinsic incombustibility, wider electrochemical stability window (ESW), and better thermal stability. Among various kinds of SEs, inorganic solid-state electrolytes (ISEs) stand out because of their high ionic conductivity, excellent oxidative stability, and good mechanical strength, rendering potential utilization in safe and dendrite-free SMBs at room temperature. However, the development of Na-ion ISEs still remains challenging, that a perfect solution has yet to be achieved. Herein, we provide a comprehensive and in-depth inspection of the state-of-the-art ISEs, aiming at revealing the underlying Na⁺ conduction mechanisms at different length scales, and interpreting their compatibility with the Na metal anode from multiple aspects. A thorough material screening will include nearly all ISEs developed to date, i.e., oxides, chalcogenides, halides, antiperovskites, and borohydrides, followed by an overview of the modification strategies for enhancing their ionic conductivity and interfacial compatibility with Na metal, including synthesis, doping and interfacial engineering. By discussing the remaining challenges in ISE research, we propose rational and strategic perspectives that can serve as guidelines for future development of desirable ISEs and practical implementation of high-performance SMBs.

Room-Temperature Transient Hydrogen Uptake of MgH2 Induced by Nb-Doped TiO2 Solid-Solution Catalysts

The practical applications of MgH₂ as a high-density hydrogen carrier depend heavily on efficient and low-cost catalysts to accelerate the dehydriding/hydriding reactions at moderate temperatures. In the present work, this issue is addressed by synthesizing Nb-doped TiO₂ solid-solution-type catalysts that dramatically improve the hydrogen sorption performances of MgH₂. The catalyzed MgH₂ can absorb 5 wt % of H₂ even at room temperature for 20 s, release 6 wt % of H₂ at 225 °C within 12 min, and the complete dehydrogenation can be achieved at 150 °C under a dynamic vacuum atmosphere. Density functional theory calculations reveal that Nb doping introduces Nb 4d orbitals with stronger interaction with H 1s into the density of states of TiO₂. This considerably enhances both the adsorption and dissociation ability of the H₂ molecule on the catalysts surface and the hydrogen diffusion across the specific Mg/Ti(Nb)O₂ interface. The successful implementation of solid solution-type catalysts in MgH₂ offers a demonstration and inspiration for the development of high-performance catalysts and solid-state hydrogen storage materials.

Recent Advances in Electrochemical-Based Silicon Production Technologies with Reduced Carbon Emission

Sustainable and low-carbon-emission silicon production is currently one of the main focuses for the metallurgical and materials science communities. Electrochemistry, considered a promising strategy, has been explored to produce silicon due to prominent advantages: (a) high electricity utilization efficiency; (b) low-cost silica as a raw material; and (c) tunable morphologies and structures, including films, nanowires, and nanotubes. This review begins with a summary of early research on the extraction of silicon by electrochemistry. Emphasis has been placed on the electro-deoxidation and dissolution-electrodeposition of silica in chloride molten salts since the 21st century, including the basic reaction mechanisms, the fabrication of photoactive Si films for solar cells, the design and production of nano-Si and various silicon components for energy conversion, as well as storage applications. Besides, the feasibility of silicon electrodeposition in room-temperature ionic liquids and its unique opportunities are evaluated. On this basis, the challenges and future research directions for silicon electrochemical production strategies are proposed and discussed, which are essential to achieve large-scale sustainable production of silicon by electrochemistry.

Investigation on the Formation of Rare-Earth Metal Phenoxides via Metathesis

A number of alkali organometallic complexes with suitable thermodynamic properties and high capacity for hydrogen storage have been synthesized; however, few transition metal–organic complexes have been reported for hydrogen storage. Moreover, the synthetic processes of these transition metal–organic complexes via metathesis were not well characterized previously, leading to a lack of understanding of the metathesis reaction. In the present study, yttrium phenoxide and lanthanum phenoxide were synthesized via metathesis of sodium phenoxide with YCl3 and LaCl3, respectively. Quasi in situ NMR, UV-vis, and theoretical calculations were employed to characterize the synthetic processes and the final products. It is revealed that the electron densities of phenoxides in rare-earth phenoxides are lower than in sodium phenoxide due to the stronger Lewis acidity of Y3+ and La3+. The synthetic process may follow a pathway of stepwise formation of dichloride, monochloride, and chloride-free species. Significant decreases in K-band and R-band absorption were observed in UV-vis, which may be due to the weakened conjugation effect between O and the aromatic ring after rare-earth metal substitution. Two molecular structures, i.e., planar and nonplanar, are identified by theoretical calculations for each rare-earth phenoxide. Since these two structures have very close single-point energies, they may coexist in the materials.

Germanium hydrides as an efficient hydrogen-storage material operated by an iron catalyst

The use of metal hydrides such as NaBH₄ as hydrogen-storage materials has recently received substantial research attention on account of the worldwide demand for the development of efficient hydrogen-production, -storage, and -transportation systems. Here, we report the quantitative production of H₂ gas from a germanium hydride, Ph₂GeH₂, mediated by an iron catalyst at room temperature via dehydrogenative coupling, concomitant with the formation of (GePh₂)₅. Of particular importance is that Ph₂GeH₂ can be facilely recovered from (GePh₂)₅ by contact with 1 atm of H₂ or PhICl₂/LiAlH₄ at 0 °C or 40 °C, respectively. A detailed reaction mechanism for the iron-catalyzed dehydrogenative coupling of Ph₂GeH₂ is proposed based on the isolation of four intermediate iron species.

Solar-Driven Reversible Hydrogen Storage

The lack of safe and efficient hydrogen storage is a major bottleneck for large-scale application of hydrogen energy. Reversible hydrogen storage of light-weight metal hydrides with high theoretical gravimetric and volumetric hydrogen density is one ideal solution but requires extremely high operating temperature with large energy input. Herein, taking MgH₂ as an example, a concept is demonstrated to achieve solar-driven reversible hydrogen storage of metal hydrides via coupling the photothermal effect and catalytic role of Cu nanoparticles uniformly distributed on the surface of MXene nanosheets (Cu@MXene). The photothermal effect of Cu@MXene, coupled with the "heat isolator" role of MgH₂ indued by its poor thermal conductivity, effectively elevates the temperature of MgH₂ upon solar irradiation. The "hydrogen pump" effect of Ti and TiH_x species that are in situ formed on the surface of MXene from the reduction of MgH₂ , on the other hand, plays a catalytic role in effectively alleviating the kinetic barrier and hence decreasing the operating temperature required for reversible hydrogen adsorption and desorption of MgH₂ . Based on the combination of photothermal and catalytic effect of Cu@MXene, a reversible hydrogen storage capacity of 5.9 wt% is achieved for MgH₂ after 30 cycles using solar irradiation as the only energy source.

Paving the Way to the Fuel of the Future-Nanostructured Complex Hydrides

Hydrides have emerged as strong candidates for energy storage applications and their study has attracted wide interest in both the academic and industry sectors. With clear advantages due to the solid-state storage of hydrogen, hydrides and in particular complex hydrides have the ability to tackle environmental pollution by offering the alternative of a clean energy source: hydrogen. However, several drawbacks have detracted this material from going mainstream, and some of these shortcomings have been addressed by nanostructuring/nanoconfinement strategies. With the enhancement of thermodynamic and/or kinetic behavior, nanosized complex hydrides (borohydrides and alanates) have recently conquered new estate in the hydrogen storage field. The current review aims to present the most recent results, many of which illustrate the feasibility of using complex hydrides for the generation of molecular hydrogen in conditions suitable for vehicular and stationary applications. Nanostructuring strategies, either in the pristine or nanoconfined state, coupled with a proper catalyst and the choice of host material can potentially yield a robust nanocomposite to reliably produce H2 in a reversible manner. The key element to tackle for current and future research efforts remains the reproducible means to store H2, which will build up towards a viable hydrogen economy goal. The most recent trends and future prospects will be presented herein.

Alloying effect of Ni-Mo catalyst in hydrogenation of N-ethylcarbazole for hydrogen storage

Liquid organic hydrogen storage with N-ethylcarbazole (NEC) as a carrier is a very promising method. The use of precious metal hydrogenation catalysts restricts the development in industrial grade. Efficient and low-cost hydrogen storage catalysts are essential for its application. In this work, a Ni-Mo alloy catalyst supported by commercial activated carbon was synthesized by impregnation method, and the Ni-Mo ratio and preparation conditions were optimized. The catalyst was characterized by XRD, XPS, H₂-TPR, SEM, and TEM. The results showed that the doping of Mo could dramatically promote the catalytic hydrogenation of N-ethylcarbazole by the Ni-based catalyst. More than 5.75 wt% hydrogenation could be achieved in 4 h using the Ni-Mo catalyst, and the selectivity of the fully hydrogenated product 12H-NEC could be effectively improved. This result reduces the cost of hydrogenation catalysts by more than 90% and makes liquid organic hydrogen storage a scaled possibility.

Ti-Mn hydrogen storage alloys: from properties to applications

Efficient and safe storage of hydrogen is an important link in the process of hydrogen energy utilization. Hydrogen storage with hydrogen storage materials as the medium has the characteristics of high volumetric hydrogen storage density and good safety. Among many hydrogen storage materials, only rare earth-based and titanium-based hydrogen storage alloys have been applied thus far. In this work, current state-of-the-art research and applications of Ti-Mn hydrogen storage alloys are reviewed. Firstly, the hydrogen storage properties and regulation methods of binary to multicomponent Ti-Mn alloys are introduced. Then, the applications of Ti-Mn alloys in hydrogen storage, hydrogen compression and catalysis are discussed. Finally, the future research and development of Ti-Mn hydrogen storage alloys is proposed.

Directed Stabilization by Air-Milling and Catalyzed Decomposition by Layered Titanium Carbide Toward Low-Temperature and High-Capacity Hydrogen Storage of Aluminum Hydride

AlH₃ is a metastable hydride with a theoretical hydrogen capacity of 10.01 wt % and is very easy to decompose during ball milling especially in the presence of many catalysts, which will lead to the attenuation of the available hydrogen capacity. In this work, AlH₃ was ball milled in air (called "air-milling") with layered Ti₃C₂ to prepare a Ti₃C₂-catalyzed AlH₃ hydrogen storage material. Such air-milled and Ti₃C₂-catalyzed AlH₃ possesses excellent hydrogen storage performances, with a low initial decomposition temperature of just 61 °C and a high hydrogen release capacity of 8.1 wt %. In addition, 6.9 wt % of hydrogen can be released within 20 min at constantly 100 °C, with a low activation energy as low as 40 kJ mol^-1. Air-milling will lead to the formation of an Al₂O₃ oxide layer on the AlH₃ particles, which will prevent continuous decomposition of AlH₃ when milling with active layered Ti₃C₂. The layered Ti₃C₂ will grip on and intrude into the AlH₃ particle oxide layers and then catalyze the decomposition of AlH₃ during heating. The strategy employing air-milling as a synthesis method and utilizing layered Ti₃C₂ as a catalyst in this work can solve the key issue of severe decomposition during ball milling with catalysts economically and conveniently and thus achieve both high-capacity and low-temperature hydrogen storage of AlH₃. This air-milling method is also effective for other active catalysts toward both reducing the decomposition temperature and increasing the available hydrogen capacity of AlH₃.

Impact of Hydrogen Liquefaction on Hydrogen Fuel Quality for Transport Applications (ISO-14687:2019)

Decarbonisation of the energy sector is becoming increasingly more important to the reduction in climate change. Renewable energy is an effective means of reducing CO2 emissions, but the fluctuation in demand and production of energy is a limiting factor. Liquid hydrogen allows for long-term storage of energy. Hydrogen quality is important for the safety and efficiency of the end user. Furthermore, the quality of the hydrogen gas after liquefaction has not yet been reported. The purity of hydrogen after liquefaction was assessed against the specification of Hydrogen grade D in the ISO-14687:2019 by analysing samples taken at different locations throughout production. Sampling was carried out directly in gas cylinders, and purity was assessed using multiple analytical methods. The results indicate that the hydrogen gas produced from liquefaction is of a higher purity than the starting gas, with all impurities below the threshold values set in ISO-14687:2019. The amount fraction of water measured in the hydrogen sample increased with repeated sampling from the liquid hydrogen tank, suggesting that the sampling system used was affected by low temperatures (−253 °C). These data demonstrate for the first time the impact of liquefaction on hydrogen purity assessed against ISO-14687:2019, showing that liquified hydrogen is a viable option for long-term energy storage whilst also improving quality.

Recent Development in Nanoconfined Hydrides for Energy Storage

Hydrogen is the ultimate vector for a carbon-free, sustainable green-energy. While being the most promising candidate to serve this purpose, hydrogen inherits a series of characteristics making it particularly difficult to handle, store, transport and use in a safe manner. The researchers' attention has thus shifted to storing hydrogen in its more manageable forms: the light metal hydrides and related derivatives (ammonia-borane, tetrahydridoborates/borohydrides, tetrahydridoaluminates/alanates or reactive hydride composites). Even then, the thermodynamic and kinetic behavior faces either too high energy barriers or sluggish kinetics (or both), and an efficient tool to overcome these issues is through nanoconfinement. Nanoconfined energy storage materials are the current state-of-the-art approach regarding hydrogen storage field, and the current review aims to summarize the most recent progress in this intriguing field. The latest reviews concerning H2 production and storage are discussed, and the shift from bulk to nanomaterials is described in the context of physical and chemical aspects of nanoconfinement effects in the obtained nanocomposites. The types of hosts used for hydrogen materials are divided in classes of substances, the mean of hydride inclusion in said hosts and the classes of hydrogen storage materials are presented with their most recent trends and future prospects.

Rational Design of Endohedral Superhalogens without Using Metal Cations and Electron Counting Rules

Superhalogens, predicted 40 years ago, have attracted considerable attention due to their potential as building blocks of novel materials with various applications. While a large number of superhalogen clusters have been theoretically predicted and experimentally synthesized, they either require the use of a metal cation or electron counting rules. In particular, very rare endohedral cage clusters in defiance of the above requirements have been found to be superhalogens. In this work, motivated by recent experimental advances in endohedral cage clusters, we present a rational design principle for creating a new class of such superhalogens. Focusing on the chemical formula of A@Si₂₀X₂₀ (A = F, Cl, Br, I, BH₄, BF₄; X = H, F, Cl, Br, I, BO, CN, SCN, CH₃), we use first-principles calculations to study 54 different clusters and show that these clusters possess electron affinities as high as 8.5 eV. Some of these clusters with X = BO and CN can even be stable as dianions, with large second electron affinity ∼2 eV. Similarly, Cl@C₆₀ is found to be a superhalogen. This class of superhalogens is different from the conventional ones with chemical formula MX_k+1, where X is a halogen and M is a cation with a formal +k oxidation state. Interestingly, the electron affinities of A@Si₂₀X₂₀ are almost independent of the central A moiety, but are guided by the functional group X. The potential of these endohedral superhalogens as electrolytes in Li-ion batteries is discussed.

Structural diversity and hydrogen storage properties in the system K-Si-H

KSiH₃ exhibits 4.1 wt% experimental hydrogen storage capacity and shows reversibility under moderate conditions, which provides fresh impetus to the search for other complex hydrides in the K-Si-H system. Here, we reproduce the stable Fm3̄m phase of K₂SiH₆ and uncover two denser phases, space groups P3̄m1 and P6₃mc at ambient pressure, by means of first-principles structure searches. We note that P3̄m1-K₂SiH₆ has a high hydrogen content of 5.4 wt% and a volumetric density of 88.3 g L^-1. Further calculations suggest a favorable dehydrogenation temperature T_des of -20.1/55.8 °C with decomposition into KSi + K + H₂. The higher hydrogen density and appropriate dehydrogenation temperature indicate that K₂SiH₆ is a promising hydrogen storage material, and our results provide helpful and clear guidance for further experimental studies. We found three further potential hydrogen storage materials stable at high pressure: K₂SiH₈, KSiH₇ and KSiH₈. These results suggest the need for further investigations into hydrogen storage materials among such ternary hydrides at high pressure.

De-hydrogenation/Rehydrogenation Properties and Reaction Mechanism of AmZn(NH2)n-2nLiH Systems (A = Li, K, Na, and Rb)

With the aim to find suitable hydrogen storage materials for stationary and mobile applications, multi-cation amide-based systems have attracted considerable attention, due to their unique hydrogenation kinetics. In this work, AmZn(NH2)n (with A = Li, K, Na, and Rb) were synthesized via an ammonothermal method. The synthesized phases were mixed via ball milling with LiH to form the systems AmZn(NH2)n-2nLiH (with m = 2, 4 and n = 4, 6), as well as Na2Zn(NH2)4∙0.5NH3-8LiH. The hydrogen storage properties of the obtained materials were investigated via a combination of calorimetric, spectroscopic, and diffraction methods. As a result of the performed analyses, Rb2Zn(NH2)4-8LiH appears as the most appealing system. This composite, after de-hydrogenation, can be fully rehydrogenated within 30 s at a temperature between 190 °C and 200 °C under a pressure of 50 bar of hydrogen.

An Overview of the Recent Advances of Additive-Improved Mg(BH4)2 for Solid-State Hydrogen Storage Material

Recently, hydrogen (H2) has emerged as a superior energy carrier that has the potential to replace fossil fuel. However, storing H2 under safe and operable conditions is still a challenging process due to the current commercial method, i.e., H2 storage in a pressurised and liquified state, which requires extremely high pressure and extremely low temperature. To solve this problem, research on solid-state H2 storage materials is being actively conducted. Among the solid-state H2 storage materials, borohydride is a potential candidate for H2 storage owing to its high gravimetric capacity (majority borohydride materials release >10 wt% of H2). Mg(BH4)2, which is included in the borohydride family, shows promise as a good H2 storage material owing to its high gravimetric capacity (14.9 wt%). However, its practical application is hindered by high thermal decomposition temperature (above 300 °C), slow sorption kinetics and poor reversibility. Currently, the general research on the use of additives to enhance the H2 storage performance of Mg(BH4)2 is still under investigation. This article reviews the latest research on additive-enhanced Mg(BH4)2 and its impact on the H2 storage performance. The future prospect and challenges in the development of additive-enhanced Mg(BH4)2 are also discussed in this review paper. To the best of our knowledge, this is the first systematic review paper that focuses on the additive-enhanced Mg(BH4)2 for solid-state H2 storage.

Technologies and perspectives for achieving carbon neutrality

Global development has been heavily reliant on the overexploitation of natural resources since the Industrial Revolution. With the extensive use of fossil fuels, deforestation, and other forms of land-use change, anthropogenic activities have contributed to the ever-increasing concentrations of greenhouse gases (GHGs) in the atmosphere, causing global climate change. In response to the worsening global climate change, achieving carbon neutrality by 2050 is the most pressing task on the planet. To this end, it is of utmost importance and a significant challenge to reform the current production systems to reduce GHG emissions and promote the capture of CO2 from the atmosphere. Herein, we review innovative technologies that offer solutions achieving carbon (C) neutrality and sustainable development, including those for renewable energy production, food system transformation, waste valorization, C sink conservation, and C-negative manufacturing. The wealth of knowledge disseminated in this review could inspire the global community and drive the further development of innovative technologies to mitigate climate change and sustainably support human activities.

Graphene and Carbon Nanotubes Fibrous Composite Decorated with PdMg Alloy Nanoparticles with Enhanced Absorption-Desorption Kinetics for Hydrogen Storage Application

We describe a graphene and fibrous multiwall carbon nanotubes (f-MWCNT) composite film prepared by plasma-enhanced chemical vapor deposition for use as a suitable and possible candidate of hydrogen storage materials. A high storage capacity of 5.53 wt% has been obtained with improved kinetics. The addition of binary PdMg alloy nanoparticles to the surface of graphene-fibrous nanotubes composite films raised the storage capacity by 53% compared to the film without PdMg decorated nanoparticles. Additionally, the graphene/f-MWCNT composite film decorated with PdMg nanoparticles exhibited an enhanced hydrogen absorption-desorption kinetics. The fibrous structure of the MWCNTs, alongside graphene sheets within the film, creates an enormous active region site for hydrogen reaction. The addition of PdMg nanoparticles enhanced the reaction kinetics due to the catalytic nature of Pd, and increased the hydrogen content due to the high absorption capacity of Mg nanoparticles. The combination of Pd and Mg in a binary alloy nanoparticle enhanced the hydrogen capacity and absorption-desorption kinetics.

Liquid Hydrogen: A Review on Liquefaction, Storage, Transportation, and Safety

Decarbonization plays an important role in future energy systems for reducing greenhouse gas emissions and establishing a zero-carbon society. Hydrogen is believed to be a promising secondary energy source (energy carrier) that can be converted, stored, and utilized efficiently, leading to a broad range of possibilities for future applications. Moreover, hydrogen and electricity are mutually converted, creating high energy security and broad economic opportunities toward high energy resilience. Hydrogen can be stored in various forms, including compressed gas, liquid hydrogen, hydrides, adsorbed hydrogen, and reformed fuels. Among these, liquid hydrogen has advantages, including high gravimetric and volumetric hydrogen densities and hydrogen purity. However, liquid hydrogen is garnering increasing attention owing to the demand for long storage periods, long transportation distances, and economic performance. This paper reviews the characteristics of liquid hydrogen, liquefaction technology, storage and transportation methods, and safety standards to handle liquid hydrogen. The main challenges in utilizing liquid hydrogen are its extremely low temperature and ortho- to para-hydrogen conversion. These two characteristics have led to the urgent development of hydrogen liquefaction, storage, and transportation. In addition, safety standards for handling liquid hydrogen must be updated regularly, especially to facilitate massive and large-scale hydrogen liquefaction, storage, and transportation.

Roles of Ti-Based Catalysts on Magnesium Hydride and Its Hydrogen Storage Properties

Magnesium-based hydrides are considered as promising candidates for solid-state hydrogen storage and thermal energy storage, due to their high hydrogen capacity, reversibility, and elemental abundance of Mg. To improve the sluggish kinetics of MgH2, catalytic doping using Ti-based catalysts is regarded as an effective approach to enhance Mg-based materials. In the past decades, Ti-based additives, as one of the important groups of catalysts, have received intensive endeavors towards the understanding of the fundamental principle of catalysis for the Mg-H2 reaction. In this review, we start with the introduction of fundamental features of magnesium hydride and then summarize the recent advances of Ti-based additive doped MgH2 materials. The roles of Ti-based catalysts in various categories of elemental metals, hydrides, oxides, halides, and intermetallic compounds were overviewed. Particularly, the kinetic mechanisms are discussed in detail. Moreover, the remaining challenges and future perspectives of Mg-based hydrides are discussed.

Quantifying Species Populations in Multivalent Borohydride Electrolytes

Multivalent batteries represent an important beyond Li-ion energy storage concept. The prospect of calcium batteries, in particular, has emerged recently due to novel electrolyte demonstrations, especially that of a ground-breaking combination of the borohydride salt Ca(BH₄)₂ dissolved in tetrahydrofuran. Recent analysis of magnesium and calcium versions of this electrolyte led to the identification of divergent speciation pathways for Mg²⁺ and Ca²⁺ despite identical anions and solvents, owing to differences in cation size and attendant flexibility of coordination. To test these proposed speciation equilibria and develop a more quantitative understanding thereof, we have applied pulsed-field-gradient nuclear magnetic resonance and dielectric relaxation spectroscopy to study these electrolytes. Concentration-dependent variation in anion diffusivities and solution dipole relaxations, interpreted with the aid of molecular dynamics simulations, confirms these divergent Mg²⁺ and Ca²⁺ speciation pathways. These results provide a more quantitative description of the electroactive species populations. We find that these species are present in relatively small quantities, even in the highly active Ca(BH₄)₂/tetrahydrofuran electrolyte. This finding helps interpret previous characterizations of metal deposition efficiency and morphology control and thus provides important fundamental insight into the dynamic properties of multivalent electrolytes for next-generation batteries.

Splitting of multiple hydrogen molecules by bioinspired diniobium metal complexes: a DFT study

Splitting of molecular hydrogen (H₂) into bridging and terminal hydrides is a common step in transition metal chemistry. Herein, we propose a novel organometallic platform for cleavage of multiple H₂ molecules, which combines metal centers capable of stabilizing multiple oxidation states, and ligands bearing positioned pendant basic groups. Using quantum chemical modeling, we show that low-valent, early transition metal diniobium(ii) complexes with diphosphine ligands featuring pendant amines can favorably uptake up to 8 hydrogen atoms, and that the energetics are favored by the formation of intramolecular dihydrogen bonds. This result suggests new possible strategies for the development of hydrogen scavenger molecules that are able to perform reversible splitting of multiple H₂ molecules.

Clean production and utilisation of hydrogen in molten salts

Green and low cost production of strategic materials such as steel and graphene at large scale is a critical step towards sustainable industrial developments. Hydrogen is a green fuel for the future, and a key element for the clean production of steel. However, the sustainable and economic production of hydrogen is a barrier towards its large scale utilisation in iron and steelmaking, and other possible applications. As a key challenge, the water electrolysis, which is commonly used for the carbon-free production of hydrogen, is uneconomic and involves various problems including the corrosion of equipment, the use of expensive catalysts and high over-potentials, limiting its viability. Moreover, the hydrogen transportation from the electrolyser to the utilisation unit is problematic in terms of cost and safety. From a thermodynamic point of view, the potential and efficiency of the water splitting process can greatly be improved at high temperatures. Therefore, a practical approach to resolve the above-mentioned shortcomings can be based on the electro-generation of hydrogen in high temperature molten salts, and the utilisation of the generated hydrogen in situ to produce metals, alloys or other commercially valuable materials. Clean production of alloy powders is particularly interesting due to the rising of advanced manufacturing methods like additive manufacturing. The hydrogen produced in molten salts can also be used for the large scale preparation of high value advanced carbon nanostructures such as single and multi-layer high quality graphene and nanodiamonds. The combination of these findings can lead to the fabrication of hybrid structures with interesting energy and environmental applications. Surprisingly, the production of a large variety of materials such as Fe, Mo, W, Ni and Co-based alloys should be achievable by the electrolytic hydrogen produced in molten salts at a potential of around 1 V, which can easily be powered by advanced photovoltaic cells. This review discusses the recent advancements on these topics.

Nanoconfinement of Molecular Magnesium Borohydride Captured in a Bipyridine-Functionalized Metal-Organic Framework

The lower limit of metal hydride nanoconfinement is demonstrated through the coordination of a molecular hydride species to binding sites inside the pores of a metal-organic framework (MOF). Magnesium borohydride, which has a high hydrogen capacity, is incorporated into the pores of UiO-67bpy (Zr₆O₄(OH)₄(bpydc)₆ with bpydc^2- = 2,2'-bipyridine-5,5'-dicarboxylate) by solvent impregnation. The MOF retained its long-range order, and transmission electron microscopy and elemental mapping confirmed the retention of the crystal morphology and revealed a homogeneous distribution of the hydride within the MOF host. Notably, the B-, N-, and Mg-edge XAS data confirm the coordination of Mg(II) to the N atoms of the chelating bipyridine groups. In situ ¹¹B MAS NMR studies helped elucidate the reaction mechanism and revealed that complete hydrogen release from Mg(BH₄)₂ occurs as low as 200 °C. Sieverts and thermogravimetric measurements indicate an increase in the rate of hydrogen release, with the onset of hydrogen desorption as low as 120 °C, which is approximately 150 °C lower than that of the bulk material. Furthermore, density functional theory calculations support the improved dehydrogenation properties and confirm the drastically lower activation energy for B-H bond dissociation.

A Unique Double-Layered Carbon Nanobowl-Confined Lithium Borohydride for Highly Reversible Hydrogen Storage

Poor reversibility and high desorption temperature restricts the practical use of lithium borohydride (LiBH₄ ) as an advanced hydrogen store. Herein, a LiBH₄ composite confined in unique double-layered carbon nanobowls prepared by a facile melt infiltration process is demonstrated, thanks to powerful capillary effect under 100 bar of H₂ pressure. The gradual formation of double-layered carbon nanobowls is witnessed by transmission electron microscopy (TEM) observation. Benefiting from the nanoconfinement effect and catalytic function of carbon, this composite releases hydrogen from 225 °C and peaks at 353 °C, with a hydrogen release amount up to 10.9 wt%. The peak temperature of dehydriding is lowered by 112 °C compared with bulk LiBH₄ . More importantly, the composite readily desorbs and absorbs ≈8.5 wt% of H₂ at 300 °C and 100 bar H₂ , showing a significant reversibility of hydrogen storage. Such a high reversible capacity has not ever been observed under the identical conditions. The usable volumetric energy density reaches as high as 82.4 g L^-1 with considerable dehydriding kinetics. The findings provide insights in the design and development of nanosized complex hydrides for on-board applications.