Highly Efficient and Stable GABr-Modified Ideal-Bandgap (1.35 eV) Sn/Pb Perovskite Solar Cells Achieve 20.63% Efficiency with a Record Small Voc Deficit of 0.33 V

Alder-Ene Reaction-Mediated Suppression of Tin(II) Oxidation for Efficient Tin-Lead Perovskite Solar Cells

Despite numerous studies have reported the inhibition of tin (II) oxidation in mixed tin-lead halide perovskite, there remains a dearth of mechanistic information regarding how tin (II) undergoes oxidation in the precursor solution, particularly in terms of the involvement of DMSO. We here take advantage of density functional theory (DFT) to uncover that SnI2 can coordinate with DMSO and react with singlet oxygen, resulting in the generation of Sn (IV). Moreover, our DFT simulations reveal that benzaldehyde oxime (BZHO) competes with SnI2 in reacting with oxygen through the Alder-ene reaction, hence effectively restraining the oxidation of tin (II), which is further verified by several experimental characterizations. Besides, the introduction of BZHO has also regulated the crystallization of the perovskite film and modified the electronic structure of the perovskite surface. As a result, the perovskite solar cells with the addition of BZHO demonstrate superior performance and operational stability, retaining 82 % of the initial PCE under continuous 1-sun illumination for 800 hours. Furthermore, the efficiency of all-perovskite tandem solar cells treated with BZHO reached 26.76 %. Therefore, this work presents a promising strategy for designing high-performance and stable all-perovskite tandem solar cells.

Enhanced Electric Field Minimizing Quasi-Fermi Level Splitting Deficit for High-Performance Tin-Lead Perovskite Solar Cells

The quasi-Fermi level splitting (QFLS) deficit caused by the non-radiative recombination at the interface of perovskite/electron transport layer (ETL) can lead to severe open-circuit voltage (VOC) loss and thus decreases the efficiency of perovskite solar cells (PSCs), however, has received limited attention in inverted tin-lead PSCs. Herein, the strategy of constructing an extra-electric field is presented by introducing ferroelectric polymer dipoles (FPD)-β-poly(1,1-difluoroethylene)-to suppress the QFLS deficit. The directional polarization of FPD can enhance the built-in electric field (BEF) and thus promote the charge transfer at the perovskite/ETL interface, which effectively suppresses non-radiative recombination. Furthermore, the incorporation of FPD facilitates high-quality crystallization of perovskite and reduces the surface energetic disorder. Therefore, the QFLS deficit in the perovskite/ETL half-stacked device is reduced from 62 to 27 meV after incorporating FPD, and the optimized device achieves an efficiency of 23.44% with a high VOC of 0.88 V. Additionally, the addition of FPD increases the activation energy for ion migration, which can reduce the effect of ion migration on the long-term stability of the device. Consequently, the FPD-incorporated device retains 88% of the initial efficiency after 1100 h of continuous illumination at the maximum power point (MPP).

The Promise and Challenges of Inverted Perovskite Solar Cells

Recently, there has been an extensive focus on inverted perovskite solar cells (PSCs) with a p-i-n architecture due to their attractive advantages, such as exceptional stability, high efficiency, low cost, low-temperature processing, and compatibility with tandem architectures, leading to a surge in their development. Single-junction and perovskite-silicon tandem solar cells (TSCs) with an inverted architecture have achieved certified PCEs of 26.15% and 33.9% respectively, showing great promise for commercial applications. To expedite real-world applications, it is crucial to investigate the key challenges for further performance enhancement. We first introduce representative methods, such as composition engineering, additive engineering, solvent engineering, processing engineering, innovation of charge transporting layers, and interface engineering, for fabricating high-efficiency and stable inverted PSCs. We then delve into the reasons behind the excellent stability of inverted PSCs. Subsequently, we review recent advances in TSCs with inverted PSCs, including perovskite-Si TSCs, all-perovskite TSCs, and perovskite-organic TSCs. To achieve final commercial deployment, we present efforts related to scaling up, harvesting indoor light, economic assessment, and reducing environmental impacts. Lastly, we discuss the potential and challenges of inverted PSCs in the future.

Molecule Anchoring Strategy Promotes Vertically Homogeneous Crystallization and Aligned Interfaces for Efficient Pb-Sn Perovskite Solar Cells and Tandem Device

Narrow-bandgap (NBG) Pb-Sn perovskites are ideal candidates as rear subcell in all-perovskite tandem solar cells. Because Pb-Sn perovskites contain multiple components, the rational regulation of vertical structure and both interfaces of the film is primarily crucial to achieve high-performing NBG perovskite solar cells (PSCs). Herein, a molecule anchoring strategy is developed to in situ construct Cs0.1MA0.3FA0.6Pb0.5Sn0.5I3 perovskite film with vertically aligned crystals and optimized interfaces. Specifically, l-alanine methyl ester is developed as an anchoring additive to induce the vertical crystal growth, while PEA2PbI3SCN film is introduced to promote the homogeneous crystallization at the buried interface via SCN- anchoring with cations. Further ethylenediamine dihalides (EDA(I/Cl)2) post-treatment leads to the gradient energy level alignment on the film surface. Pb-Sn PSCs based on such film show efficient charge transport and extraction, producing a champion power conversion efficiency (PCE) of 22.3% with an impressive fill factor of 82.14%. Notably, combining with semitransparent 1.78 eV wide-bandgap PSCs, the four-terminal all-perovskite tandem device achieves a PCE of 27.1%. This work opens up a new pathway to boost the performance of Pb-Sn PSCs and their tandem devices.

Effect of ABX3 site changes on the performance of tin-lead mixed perovskite solar cells

Tin-lead mixed perovskite solar cells (TLMPSCs), with the advantage of approaching the Shockley-Queisser (S-Q) limit for photovoltaic applications, have been rapidly developed and achieved a power conversion efficiency (PCE) of 23.7%. Although the low toxicity of TLMPSCs is conducive to sustainable development, the oxidation of Sn2+ could destroy the perovskite structure easily. Thus, most researchers are devoted to improving the photoelectric performance and stability through additive engineering, interface engineering, device structure optimization, solvent engineering, etc. However, TLMPs with different A-sites and X-sites in the ABX3 model and an optimal ratio of Sn : Pb still need to be investigated; this is the basis of mechanistic analysis. In this paper, we introduce TLMPSCs with different A-sites, X-sites, and Sn-Pb ratios. The mechanism and properties of the cations are analyzed based on the performance of TLMPSCs. Finally, a series of prospects for optimizing ABX3 are put forward, with the hope of attracting the attention and interest of researchers.

Progress of Hole-Transport Layers in Mixed Sn-Pb Perovskite Solar Cells

Hybrid organic-inorganic lead halide perovskite solar cells (PSCs) have rapidly emerged as a promising photovoltaic technology, with record efficiencies surpassing 26%, approaching the theoretical Shockley-Queisser limit. The advent of all-perovskite tandem solar cells (APTSCs), integrating Pb-based wide-bandgap (WBG) with mixed Sn-Pb narrow-bandgap (NBG) perovskites, presents a compelling pathway to surpass this limit. Despite recent innovations in hole transport layers (HTLs) that have significantly improved the efficiency and stability of lead-based PSCs, an effective HTL tailored for Sn-Pb NBG PSCs remains an unmet need. This review highlights the essential role of HTLs in enhancing the performance of Sn-Pb PSCs, focusing on their ability to mitigate non-radiative recombination and optimize the buried interface, thereby improving film quality. The distinct attributes of Sn-Pb perovskites, such as their lower energy levels and accelerated crystallization rates, necessitate HTLs with specialized properties. In this study, the latest advancements in HTLs are systematically examined for Sn-Pb PSCs, encompassing organic, self-assembled monolayer (SAM), inorganic materials, and HTL-free designs. The review critically assesses the inherent limitations of each HTL category, and finally proposes strategies to surmount these obstacles to reach higher device performance.

Strategies for Improving Efficiency and Stability of Inverted Perovskite Solar Cells

Perovskite solar cells (PSCs) have attracted widespread research and commercialization attention because of their high power conversion efficiency (PCE) and low fabrication cost. The long-term stability of PSCs should satisfy industrial requirements for photovoltaic devices. Inverted PSCs with a p-i-n architecture exhibit considerable advantages because of their excellent stability and competitive efficiency. The continuously broken-through PCE of inverted PSCs shows huge application potential. This review summarizes the developments and outlines the characteristics of inverted PSCs including charge transport layers (CTLs), perovskite compositions, and interfacial regulation strategies. The latest effective CTLs, interfacial modification, and stability promotion strategies especially under light, thermal, and bias conditions are emphatically analyzed. Furthermore, the applications of the inverted structure in high-efficiency and stable tandem, flexible photovoltaic devices, and modules and their main obstacles are systematically introduced. Finally, the remaining challenges faced by inverted devices are discussed, and several directions for advancing inverted PSCs are proposed according to their development status and industrialization requirements.

High-Performance Ideal Bandgap Sn-Pb Mixed Perovskite Solar Cells Achieved by MXene Passivation

Ideal bandgap (1.3-1.4 eV) Sn-Pb mixed perovskite solar cells (PSC) hold the maximum theoretical efficiency given by the Shockley-Queisser limit. However, achieving high efficiency and stable Sn-Pb mixed PSCs remains challenging. Here, piperazine-1,4-diium tetrafluoroborate (PDT) is introduced as spacer for bottom interface modification of ideal bandgap Sn-Pb mixed perovskite. This spacer enhances the quality of the upper perovskite layer and forms better energy band alignment, leading to enhanced charge extraction at the hole transport layer (HTL)/perovskite interface. Then, 2D Ti3C2Tx MXene is incorporated for surface treatment of perovskite, resulting in reduced surface trap density and enhanced interfacial electron transfer. The combinations of double-sided treatment afford the ideal bandgap PSC with a high efficiency of 20.45% along with improved environment stability. This work provides a feasible guideline to prepare high-performance and stable ideal-bandgap PSCs.

From Wide-Bandgap to Narrow-Bandgap Perovskite: Applications from Single-Junction to Tandem Optoelectronics

As perovskite solar device is burgeoning photoelectronic device, numerous studies to optimize perovskite solar device have been demonstrated. Amongst various advantages from perovskite light absorbing layer, attractive property of tunable bandgap allowed perovskite to be adopted in many different fields. Easily tunable bandgap property of perovskite opened the wide application and to get the most out of its potential, many researchers contributed as well. By precursor composition engineering, narrow bandgap with bandgap of less than 1.4 eV and wide bandgap with bandgap of more than 1.7 eV were achieved. Optimization of both narrow and wide bandgap perovskite solar cell could pave the way to all-perovskite tandem solar cell which is combination of top cell with wide bandgap and bottom cell with narrow bandgap. This review highlights numerous efforts to advance device performance of both narrow and wide bandgap perovskite solar cell and how they challenged the issues. And finally, efforts to operate and utilize all-tandem perovskite device in real world will be discussed.

Hot-Carrier Cooling Regulation for Mixed Sn-Pb Perovskite Solar Cells

The rapid relaxation of hot carriers leads to energy loss in the form of heat and consequently restricts the theoretical efficiency of single-junction solar cells; However, this issue has not received much attention in tin-lead perovskites solar cells. Herein, tin(II) oxalate (SnC2O4) is introduced into tin-lead perovskite precursor solution to regulate hot-carrier cooling dynamics. The addition of SnC2O4 increases the length of carrier diffusion, extends the lifetime of carriers, and simultaneously slows down the cooling rate of carriers. Furthermore, SnC2O4 can bond with uncoordinated Sn2+ and Pb2+ ions to regulate the crystallization of perovskite and enable large grains. The strongly reducing properties of the C2O4 2- can inhibit the oxidation of Sn2+ to Sn4+ and minimize the formation of Sn vacancies in the resulting perovskite films. Additionally, as a substitute for tin(II) fluoride, the introduction of SnC2O4 avoids the carrier transport issues caused by the aggregation of F- ions at the interface. As a result, the SnC2O4-treated Sn-Pb cells show a champion efficiency of 23.36%, as well as 27.56% for the all-perovskite tandem solar cells. Moreover, the SnC2O4-treated devices show excellent long-term stability. This finding is expected to pave the way toward stable and highly efficient all-perovskite tandem solar cells.

Enhancing the Efficiency and Stability of Tin-Lead Perovskite Solar Cells via Sodium Hydroxide Dedoping of PEDOT:PSS

Tin-lead (Sn-Pb) perovskite solar cells (PSCs) have gained interest as candidates for the bottom cell of all-perovskite tandem solar cells due to their broad absorption of the solar spectrum. A notable challenge arises from the prevalent use of the hole transport layer, PEDOT:PSS, known for its inherently high doping level. This high doping level can lead to interfacial recombination, imposing a significant limitation on efficiency. Herein, NaOH is used to dedope PEDOT:PSS, with the aim of enhancing the efficiency of Sn-Pb PSCs. Secondary ion mass spectrometer profiles indicate that sodium ions diffuse into the perovskite layer, improving its crystallinity and enlarging its grains. Comprehensive evaluations, including photoluminescence and nanosecond transient absorption spectroscopy, confirm that dedoping significantly reduces interfacial recombination, resulting in an open-circuit voltage as high as 0.90 V. Additionally, dedoping PEDOT:PSS leads to increased shunt resistance and high fill factor up to 0.81. As a result of these improvements, the power conversion efficiency is enhanced from 19.7% to 22.6%. Utilizing NaOH to dedope PEDOT:PSS also transitions its nature from acidic to basic, enhancing stability and exhibiting less than a 7% power conversion efficiency loss after 1176 h of storage in N2 atmosphere.

Narrow Bandgap Metal Halide Perovskites for All-Perovskite Tandem Photovoltaics

All-perovskite tandem solar cells are attracting considerable interest in photovoltaics research, owing to their potential to surpass the theoretical efficiency limit of single-junction cells, in a cost-effective sustainable manner. Thanks to the bandgap-bowing effect, mixed tin-lead (Sn-Pb) perovskites possess a close to ideal narrow bandgap for constructing tandem cells, matched with wide-bandgap neat lead-based counterparts. The performance of all-perovskite tandems, however, has yet to reach its efficiency potential. One of the main obstacles that need to be overcome is the─oftentimes─low quality of the mixed Sn-Pb perovskite films, largely caused by the facile oxidation of Sn(II) to Sn(IV), as well as the difficult-to-control film crystallization dynamics. Additional detrimental imperfections are introduced in the perovskite thin film, particularly at its vulnerable surfaces, including the top and bottom interfaces as well as the grain boundaries. Due to these issues, the resultant device performance is distinctly far lower than their theoretically achievable maximum efficiency. Robust modifications and improvements to the surfaces of mixed Sn-Pb perovskite films are therefore critical for the advancement of the field. This Review describes the origins of imperfections in thin films and covers efforts made so far toward reaching a better understanding of mixed Sn-Pb perovskites, in particular with respect to surface modifications that improved the efficiency and stability of the narrow bandgap solar cells. In addition, we also outline the important issues of integrating the narrow bandgap subcells for achieving reliable and efficient all-perovskite double- and multi-junction tandems. Future work should focus on the characterization and visualization of the specific surface defects, as well as tracking their evolution under different external stimuli, guiding in turn the processing for efficient and stable single-junction and tandem solar cell devices.

Optimizing Lead-free MASnBr3 Perovskite Solar Cells for High-Efficiency and Long-Term Stability Using Graphene and Advanced Interface Layers

Perovskite solar cells (PSCs) have garnered significant attention in the scientific community due to their rapid increase in performance. Inorganic perovskite devices have been noted for their high performance and long-term stability. This study introduces a device optimization process guided by modeling to produce high-efficiency PSCs using lead-free n-i-p methylammonium tin bromide (MASnBr3) materials. We have thoroughly examined the impact of both the absorber and interface layers on the optimized structure. Our approach utilized graphene as the interface layer between the hole transport and absorber layers. We employed zinc oxide (ZnO)/Al and 3C-SiC as interface layers between the absorber and electron transport layers. The optimization process involved adjusting the thicknesses of the absorber layer and interface layers and minimizing defect densities. Our proposed optimized device structure, ZnO/3C-SiC/MASnBr3/graphene/CuO/Au, demonstrates theoretical power conversion efficiencies of 31.97%, fill factors of 89.38%, a current density of 32.54 mA/cm2, a voltage of 1.112 V, and a quantum efficiency of 94%. This research underscores the ability of MASnBr3 as a nontoxic perovskite material for sustainable energy from renewable sources' applications.

Mutually Tuned Dual Additive Engineering Synergistically Enhances the Photovoltaic Performance of Tin-Based Perovskite Solar Cells

Tin-based perovskite solar cells (T-PSCs) have become the star photovoltaic products in recent years due to their low environmental toxicity and superior photovoltaic performance. However, the easy oxidation of Sn2+ and the energy level mismatch between the perovskite film and charge transport layer limit its efficiency. In order to regulate the microstructure and photoelectric properties of tin-based perovskite films to enhance the efficiency and stability of T-PSCs, guanidinium bromide (GABr) and organic Lewis-based additive methylamine cyanate (MAOCN) are introduced into the FA0.9PEA0.1SnI3-based perovskite precursor. A series of characterizations show that the interactions between additive molecules and perovskite mutually reconcile to improve the photovoltaic performance of T-PSCs. The introduction of GABr can adjust the band gap of the perovskite film and energy level alignment of T-PSCs. They significantly increase the open-circuit voltage (Voc). The MAOCN material can form hydrogen bonds with SnI2 in the precursor, which can inhibit the oxidation of Sn2+ and significantly improve the short-circuit current density (Jsc). The synergistic modulation of the dual additives reduces the trap-state density and improves photovoltaic performance, resulting in an increased champion efficiency of 9.34 for 5.22% of the control PSCs. The unencapsulated T-PSCs with GABr and MAOCN dual additives prepared in the optimized process can retain more than 110% of their initial efficiency after aging for 1750 h in a nitrogen glovebox, but the control PSCs maintain only 50% of their initial efficiency kept in the same conditions. This work provides a new perspective to further improve the efficiency and stability of T-PSCs.

Component Distribution Regulation in Sn-Pb Perovskite Solar Cells through Selective Molecular Interaction

Tin-lead (Sn-Pb) perovskite solar cells (PSCs) with near-ideal bandgap still lag behind the pure lead PSCs. Disordered heterojunctions caused by inhomogeneous Sn/Pb ratio in the binary perovskite film induce large recombination loss. Here, an Sn-Pb perovskite film is reported with homogeneous component and energy distribution by introducing hydrazine sulfate (HS) in Sn perovskite precursor. HS can form hydrogen bond network and coordinate with FASnI3 thus no longer bond with Pb2+ , which reduces the crystallization rate of tin perovskite to the level of lead analog. The strong bonding between SO4 2- and Sn2+ can also suppress its oxidation. As a result, the Sn-Pb PSCs with HS exhibit a significantly improved VOC of 0.91 V along with a high efficiency of 23.17%. Meanwhile, the hydrogen bond interaction network, strong bonding between Sn2+ and sulfate ion also improve the thermal, storage, and air stability of resulting devices.

Progress and outlook of Sn-Pb mixed perovskite solar cells

Organic-inorganic hybrid perovskites have revolutionized solar cell research owing to their excellent material properties. Most previous research has been done on Pb-based perovskites. Recently, efforts to discover a Pb-free or Pb-less perovskite material with an ideal bandgap ranging 1.1-1.3 eV have led researchers to investigate Sn-Pb mixed perovskites. Sn-Pb mixed perovskites have a bandgap of ~ 1.25 eV, which is suitable for high-efficiency single-junction and perovskite/perovskite tandem solar cells. Moreover, the Pb content of Sn-Pb mixed perovskites is 50-60% lower than that of Pb-based perovskites, partially mitigating the Pb toxicity issue. However, incorporating Sn²⁺ into the crystal structure also causes various drawbacks, such as inhomogeneous thin film morphologies, easy oxidation of Sn²⁺, and more vulnerable surface properties. Researchers have made substantial progress in addressing these challenges through improvements in compositional design, structural optimization, precursor design, and surface treatments. In this review, we provide a comprehensive overview of the progress in Sn-Pb mixed perovskite solar cells. Furthermore, we analyze the key variables and trends as well as provide an outlook for future directions in the research on Sn-Pb mixed perovskites.

Bidirectional Anions Gathering Strategy Afford Efficient Mixed PbSn Perovskite Solar Cells

Mixed lead-tin (PbSn) perovskite solar cells (PSCs) possess low toxicity and adjustable bandgap for both single-junction and all-perovskite tandem solar cells. However, the performance of mixed PbSn PSCs still lags behind the theoretical efficiency. The uncontrollable crystallization and the resulting structural defect are important reasons. Here, the bidirectional anions gathering strategy (BAG) is reported by using Methylammonium acetate (MAAc) and Methylammonium thiocyanate (MASCN) as perovskite bulk additives, which Ac^- escapes from the perovskite film top surface while SCN^- gathers at the perovskite film bottom in the crystallization process. After the optoelectronic techniques, the bidirectional anions movement caused by the top-down gradient crystallization is demonstrated. The layer-by-layer crystallization can collect anions in the next layer and gather at the broader, enabling a controllable crystallization process, thus getting a high-quality perovskite film with better phase crystallinity and lower defect concentration. As a result, PSCs treated by the BAG strategy exhibit outstanding photovoltaic and electroluminescent performance with a champion efficiency of 22.14%. Additionally, it demonstrates excellent long-term stability, which retains ≈92.8% of its initial efficiency after 4000 h aging test in the N₂ glove box.

Prospects for Tin-Containing Halide Perovskite Photovoltaics

Tin-containing metal halide perovskites have enormous potential as photovoltaics, both in narrow band gap mixed tin-lead materials for all-perovskite tandems and for lead-free perovskites. The introduction of Sn(II), however, has significant effects on the solution chemistry, crystallization, defect states, and other material properties in halide perovskites. In this perspective, we summarize the main hurdles for tin-containing perovskites and highlight successful attempts made by the community to overcome them. We discuss important research directions for the development of these materials and propose some approaches to achieve a unified understanding of Sn incorporation. We particularly focus on the discussion of charge carrier dynamics and nonradiative losses at the interfaces between perovskite and charge extraction layers in p-i-n cells. We hope these insights will aid the community to accelerate the development of high-performance, stable single-junction tin-containing perovskite solar cells and all-perovskite tandems.

Exploring Solar Cells Based on Lead- and Iodide-Deficient Halide Perovskite (d-HP) Thin Films

Perovskite solar cells have become more and more attractive and competitive. However, their toxicity induced by the presence of lead and their rather low stability hinders their potential and future commercialization. Reducing lead content while improving stability then appears as a major axis of development. In the last years, we have reported a new family of perovskite presenting PbI⁺ unit vacancies inside the lattice caused by the insertion of big organic cations that do not respect the Goldschmidt tolerance factor: hydroxyethylammonium HO-(CH₂)₂-NH₃⁺ (HEA⁺) and thioethylammonium HS-(CH₂)₂-NH₃⁺ (TEA⁺). These perovskites, named d-HPs for lead and halide-deficient perovskites, present a 3D perovskite corner-shared Pb_1-xI_3-x network that can be assimilated to a lead-iodide-deficient MAPbI₃ or FAPbI₃ network. Here, we propose the chemical engineering of both systems for solar cell optimization. For d-MAPbI₃-HEA, the power conversion efficiency (PCE) reached 11.47% while displaying enhanced stability and reduced lead content of 13% compared to MAPbI₃. On the other hand, d-FAPbI₃-TEA delivered a PCE of 8.33% with astounding perovskite film stability compared to classic α-FAPI. The presence of TEA⁺ within the lattice impedes α-FAPI degradation into yellow δ-FAPbI₃ by direct degradation into inactive Pb(OH)I, thus dramatically slowing the aging of d-FAPbI₃-TEA perovskite.

Tuning Perovskite Surface Polarity via Dipole Moment Engineering for Efficient Hole-Transport-Layer-Free Sn-Pb Mixed-Perovskite Solar Cells

Post-treatment has been recognized as one of the effective methods for passivating the underlying defects in perovskite solar cells (PSCs), but little attention has been paid to how to pick suitable passivation agents with diverse isomers for efficient PSCs, particularly for the tin-lead (Sn-Pb) mixed PSCs. Here, we introduce the dependence of the power conversion efficiency (PCE) on a dipole moment for surface passivator screening, in which we chose three trifluoromethyl-phenylethylamine hydroiodide (CF₃-PEAI) isomers as surface-treatment materials for hole-transport-layer-free (HTL-free) Sn-Pb mixed PSCs. The different positions of the -CF₃ group for the CF₃-PEAI isomer result in different dipole moments, which influences the interaction between CF₃-PEAI and lead iodide. The para position CF₃ with the highest dipole moment exhibits a higher PCE than the ortho-position with a lower dipole moment, which is attributed to the large dipole moment on the surface that could tune the surface polarity from p-type to n-type, facilitating electron charge transport in the HTL-free Sn-Pb mixed PSCs. An ultrathin 2D layer is formed on the perovskite surface to passivate the surface defects, which is responsible for the enhancement of the PCE and stability of the PSCs. As a result, the open-circuit voltage (V_OC) of the device is improved from 0.775 to 0.824 V, yielding a champion PCE of 20.17%, which is one of the highest PCEs among the reported HTL-free Sn-Pb mixed PSCs. The device also shows improved stability with remaining 75% of its initial PCEs after storage in N₂ for 700 h.

Graded 2D/3D Perovskite Hetero-Structured Films with Suppressed Interfacial Recombination for Efficient and Stable Solar Cells via DABr Treatment

Several strategies and approaches have been reported for improving the resilience and optoelectronic properties of perovskite films. However, fabricating a desirable and stable perovskite absorber layer is still a great challenge due to the optoelectronic and fabrication limitations of the materials. Here, we introduce diethylammonium bromide (DABr) as a post-treatment material for the pre-deposited methylammonium lead iodide (MAPbI₃) film to fabricate a high-quality two-dimensional/three-dimensional (2D/3D) stacked hetero-structure perovskite film. The post-treatment method of DABr not only induces the small crystals of MAPbI₃ perovskite secondary growth into a large crystal, but also forms a 2D capping layer on the surface of the 3D MAPbI3 film. Meanwhile, the grains and crystallization of 3D film with DABr post-treatment are significantly improved, and the surface defect density is remarkably reduced, which in turn effectively suppressed the charge recombination in the interface between the perovskite layer and the charge transport layer. The perovskite solar cell based on the DABr-treatment exhibited a significantly enhanced power conversion efficiency (PCE) of 19.10% with a notable improvement in the open circuit voltage (V_OC) of 1.06 V and good stability, advocating the potential of this perovskite post-treatment approach.

Integrated Ideal-Bandgap Perovskite/Bulk-Heterojunction Solar Cells with Efficiencies > 24

Here, the authors report a highly efficient integrated ideal-bandgap perovskite/bulk-heterojunction solar cell (IPBSC) with an inverted architecture, featuring a near infrared (NIR) polymer DTBTI-based bulk-heterojunction (BHJ) layer atop guanidinium bromide (GABr)-modified FA_0.7 MA_0.3 Pb_0.7 Sn_0.3 I₃ perovskite film as the photoactive layer. The IPBSC shows cascade-like energy level alignment between the charge-extractionlayer/perovskite/BHJ and efficient passivation effect of BHJ on perovskite. Thanks to the well-matched energy level alignment and high-quality ideal bandgap-based perovskite film, an efficient charge transfer occurs between the charge-extraction-layer/perovskite/BHJ. Moreover, the NIR polymer DTBTI on the perovskite film leads to an improved NIR light response for the IPBSC. In addition, the O, S and N atoms in the DTBTI polymer yield a strong interaction with perovskite, which is conducive to reducing the defects of the perovskite and suppressing charge recombination. As a result, the solar cell achieves a power conversion efficiency (PCE) of 24.27% (certificated value at 23.4% with 0.283-volt voltage loss), currently the recorded efficiency for both IPBSCs and Pb-Sn alloyed PSCs, and which is over the highest efficiency of perovskite-organic tandem solar cell. Moreover, the thermal, humidity and long-term operational stabilities of the IPBSCs are also significantly improved compared with the control PSCs.

Improving the Air Resistance of the Precursor Solution for Ambient-Air Coating of an Sn-Pb Perovskite Film with Superior Photovoltaic Performance

Owing to narrow band gap and low toxicity, tin-lead (Sn-Pb) hybrid perovskites have shown great potential in photovoltaic applications, and the highest power conversion efficiency (PCE) of Sn-Pb perovskite solar cells (PSCs) has recently reached 23.6%. However, it is still challenging to prepare Sn-Pb films in open-air condition due to the Sn²⁺ oxidation of the precursor solution under this condition. In this work, we report the stabilizing of the Sn-Pb perovskite precursor solution by using ionic liquid methylammonium acetate (MAAc) as the solvent, which enables the fabrication of Sn-Pb films in air. MAAc is found to coordinate with the Sn-Pb precursor via abundant hydrogen bonding, which stabilizes the colloids and protects the Sn²⁺ stability in the precursor solution in air. Therefore, the durability of the Sn-Pb precursor solution based on the MAAc solvent is greatly improved, which enables the fabrication of efficient PSCs and achieves a champion PCE of ∼16% with robust device stability. Moreover, due to the chemical interactions of MAAc with Sn-Pb perovskites, the Pb leakage is also suppressed in the MAAc-based Sn-Pb PSCs. This work demonstrates a feasible strategy for reliable fabrication of Sn-Pb PSCs, which could also be applied in many other optoelectronic devices.

Physics of defects in metal halide perovskites

Metal halide perovskites are widely used in optoelectronic devices, including solar cells, photodetectors, and light-emitting diodes. Defects in this class of low-temperature solution-processed semiconductors play significant roles in the optoelectronic properties and performance of devices based on these semiconductors. Investigating the defect properties provides not only insight into the origin of the outstanding performance of perovskite optoelectronic devices but also guidance for further improvement of performance. Defects in perovskites have been intensely studied. Here, we review the progress in defect-related physics and techniques for perovskites. We survey the theoretical and computational results of the origin and properties of defects in perovskites. The underlying mechanisms, functions, advantages, and limitations of trap state characterization techniques are discussed. We introduce the effect of defects on the performance of perovskite optoelectronic devices, followed by a discussion of the mechanism of defect treatment. Finally, we summarize and present key challenges and opportunities of defects and their role in the further development of perovskite optoelectronic devices.

Quasi-2D Bilayer Surface Passivation for High Efficiency Narrow Bandgap Perovskite Solar Cells

The combination of comprehensive surface passivation and effective interface carriers transfer plays a critical role in high-performance perovskite solar cells. A 2D structure is an important approach for surface passivation of perovskite film, however, its large band gap could compromise carrier transfer. Herein, we synthesize a new molecule 2-thiopheneethylamine thiocyanate (TEASCN) for the construction of bilayer quasi-2D structure precisely on a tin-lead mixed perovskite surface. This bilayer structure can passivate the perovskite surface and ensure effective carriers transfer simultaneously. As a result, the open-circuit voltage (V_oc ) of the device is increased without sacrificing short-circuit current density (J_sc ), giving rise to a high certified efficiency from a credible third-party certification of narrow band gap perovskite solar cells. Furthermore, theoretical simulation indicates that the inclusion of TEASCN makes the bilayer structure thermodynamically more stable, which provides a strategy to tailor the number of layers of quasi-2D perovskite structures.

Using Ligand Engineering to Produce Efficient and Stable Pb-Sn Perovskite Solar Cells with Antioxidative 2D Capping Layers

Pb-Sn binary halide perovskites are a promising photovoltaic material due to their low toxicity and optical absorption spectrum well matched to the solar spectrum. However, the ready oxidation of Sn²⁺ to Sn⁴⁺ makes the material system currently too unstable to commercialize. Herein, ligand engineering based on antioxidative tyramine (hydrochloride, TACl) is presented for the first time to increase the stability of this material system. Using this strategy, we generate a two-dimensional (2D) capping layer on top of a standard three-dimensional Pb-Sn film. After capping, the surface defects can be passivated and the TACl-based 2D perovskite effectively protected Sn²⁺ from oxidation, which stabilized the Sn-Pb perovskite composition, avoiding the Pb-based perovskite formation. It is further found that the TACl treatment suppressed the halide segregation and improved the perovskite film photostability. Cell efficiency increases from 16.25 to 18.28% and device lifetime (T₈₀) increases from less than 100 to over 1000 h. Our finding suggests that tuning ligand form/function represents a potentially highly productive direction to explore when trying to produce stable tin-based perovskite devices.

Reducing Energy Disorder for Efficient and Stable Sn−Pb Alloyed Perovskite Solar Cells

An organic small molecule, 1-bromo-4-(methylsulfinyl)benzene (BBMS), was utilized to reduce the energy disorder of a Sn-Pb alloyed perovskite film via hydrogen bonding and coordination bonding interactions, and the resultant BBMS-treated device showed a high efficiency of over 22 % as well as outstanding long-term stability.

Highly Efficient and Stable CsPbTh3 (Th = I, Br, Cl) Perovskite Solar Cells by Combinational Passivation Strategy

The distorted lead iodide octahedra of all-inorganic perovskite based on triple halide-mixed CsPb(I_2.85 Br_0.149 Cl_0.001 ) framework have made a tremendous breakthrough in its black phase stability and photovoltaic efficiency. However, their performance still suffers from severe ion migration, trap-induced nonradiative recombination, and black phase instability due to lower tolerance factor and high total energy. Here, a combinational passivation strategy to suppress ion migration and reduce traps both on the surface and in the bulk of the CsPhTh₃ perovskite film is developed, resulting in improved power conversion efficiency (PCE) to as high as 19.37%. The involvement of guanidinium (GA) into the CsPhTh₃ perovskite bulk film and glycocyamine (GCA) passivation on the perovskite surface and grain boundary synergistically enlarge the tolerance factor and suppress the trap state density. In addition, the acetate anion as a nucleating agent significantly improves the thermodynamic stability of GA-doped CsPbTh₃ film through the slight distortion of PbI₆ octahedra. The decreased nonradiative recombination loss translates to a high fill factor of 82.1% and open-circuit voltage (V_OC ) of 1.17 V. Furthermore, bare CsPbTh₃ perovskite solar cells without any encapsulation retain 80% of its initial PCE value after being stored for one month under ambient conditions.

High-Performance Tin-Lead Mixed-Perovskite Solar Cells with Vertical Compositional Gradient

Sn-Pb mixed perovskites with bandgaps in the range of 1.1-1.4 eV are ideal candidates for single-junction solar cells to approach the Shockley-Queisser limit. However, the efficiency and stability of Sn-Pb mixed-perovskite solar cells (PSCs) still lag far behind those of Pb-based counterparts due to the easy oxidation of Sn²⁺ . Here, a reducing agent 4-hydrazinobenzoic acid is introduced as an additive along with SnF₂ to suppress the oxidation of Sn²⁺ . Meanwhile, a vertical Pb/Sn compositional gradient is formed spontaneously after an antisolvent treatment due to different solubility and crystallization kinetics of Sn- and Pb-based perovskites and it can be finely tuned by controlling the antisolvent temperature. Because the band structure of a perovskite is dependent on its composition, graded vertical heterojunctions are constructed in the perovskite films with a compositional gradient, which can enhance photocarrier separation and suppress carrier recombination in the resultant PSCs. Under optimal fabrication conditions, the Sn-Pb mixed PSCs show power conversion efficiency up to 22% along with excellent stability during light soaking.

Plasmon-coupled Au-nanochain functionalized PEDOT:PSS for efficient mixed tin-lead iodide perovskite solar cells

Au nanochains with a coupled plasmonic nanostructure were first introduced into PEDOT:PSS used as a hole transport layer to fabricate mixed tin-lead PSCs. The improved electrical properties and the promotion of optical absorption contributed to a high PCE of 19.2%. Moreover, the PSCs show substantial enhancement in stability.

Spiro[cyclopentadithiophene-dioxolane]-Based D-A-D Type Organic Molecule for Both Crystallization Improvement and Band Adjustment of Perovskites

To improve the crystallization and meanwhile adjust the band levels of perovskites, we design and synthesize a novel organic molecule, 4,4'-(spiro[cyclopenta[1,2-b:5,4-b']dithiophene-4,2'-[1,3]dioxolane]-2,6-diyl)bis(N,N-bis(4-methoxyphenyl)aniline) (TM1), to dissolve in an antisolvent for the antisolvent engineering of perovskite solar cells (PSCs). The coordination interactions between TM1 and Pb²⁺ ions in perovskites and the hydrogen bonds between the O atoms in the methoxy of TM1 and the MA⁺ in perovskites are characterized with X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. Owing to these interactions, TM1 can improve the perovskite crystallization, which reduces the trap density, enhances the interfacial hole extraction, and retards charge recombination as well, boosting short-circuit photocurrent notably. TM1 also shifts the valence band of perovskites upward by 0.17 eV, which aligns better with the highest occupied molecular orbital of hole transport materials and thus increases the open-circuit photovoltage significantly. As a result, the power conversion efficiency is enhanced from 17.22 to 20.21% by TM1. Moreover, TM1 can also improve device stability significantly. These findings demonstrate that TM1 is a kind of functional material as an additive in an antisolvent for both crystallization improvement and energy level adjustment of perovskites toward highly efficient and stable PSCs.

β-Diketone Coordination Strategy for Highly Efficient and Stable Pb-Sn Mixed Perovskite Solar Cells

The narrow bandgap Pb-Sn hybrid perovskite materials with lower toxicities and adjustable optical bandgaps provide the opportunity to construct high-efficiency perovskite solar cells (PerSCs). To solve the issues of the uncontrollable crystallization rate of Pb-Sn perovskite and easy oxidation of Sn²⁺, a β-diketone-based additive, N,N,N',N'-tetraphenylmalondiamide (TPMA), is introduced to coordinate with Pb²⁺ and Sn²⁺. The introduction of TPMA can improve the morphology of perovskite films and decrease the density of defect states, resulting in an enhanced power conversion efficiency of >20% and improved stability. The PerSC without encapsulation retains 94% of its initial efficiency after being stored for 1000 h in a nitrogen-filled glovebox and shows a lifetime of only 8% degradation after being continuously heated for 100 h at 80 °C. This work represents a new strategy of introducing a β-diketone ligand as an additive in precursor engineering for achieving efficient and stable PerSCs.

Tuning structural isomers of phenylenediammonium to afford efficient and stable perovskite solar cells and modules

Organic halide salt passivation is considered to be an essential strategy to reduce defects in state-of-the-art perovskite solar cells (PSCs). This strategy, however, suffers from the inevitable formation of in-plane favored two-dimensional (2D) perovskite layers with impaired charge transport, especially under thermal conditions, impeding photovoltaic performance and device scale-up. To overcome this limitation, we studied the energy barrier of 2D perovskite formation from ortho-, meta- and para-isomers of (phenylene)di(ethylammonium) iodide (PDEAI₂) that were designed for tailored defect passivation. Treatment with the most sterically hindered ortho-isomer not only prevents the formation of surficial 2D perovskite film, even at elevated temperatures, but also maximizes the passivation effect on both shallow- and deep-level defects. The ensuing PSCs achieve an efficiency of 23.9% with long-term operational stability (over 1000 h). Importantly, a record efficiency of 21.4% for the perovskite module with an active area of 26 cm² was achieved.

Antioxidation and Energy-Level Alignment for Improving Efficiency and Stability of Hole Transport Layer-Free and Methylammonium-Free Tin-Lead Perovskite Solar Cells

Tin-lead (Sn-Pb) perovskites have shown great potential in applications of single-junction perovskite solar cells (PSCs) and tandem devices due to outstanding photoelectrical properties and low band gaps. Currently, Sn-Pb PSCs typically have a p-i-n structure, but choices of hole transport layer (HTL) materials are very limited and there are different concerns in each of them. Eliminating the HTL is a direct and promising strategy to address the concerns, but is rarely studied. In this work, we demonstrate HTL-free and MA-free based Sn-Pb PSCs and a synergistic integration strategy of simultaneously introducing a reducing agent and in situ surface passivation. With the integration strategy, Sn-Pb perovskite films with enhanced antioxidation, reduced trap density, prolonged carrier lifetime, and improved energy-level alignment are achieved. Consequently, final HTL-free PSCs exhibit a champion power conversion efficiency (PCE) of 17.4%, which is a new record for HTL-free and MA-free Sn-Pb PSCs. Meanwhile, the integration strategy-based HTL-free device maintains excellent stability with efficiency unchanged for the first 200 h, and finally retaining 81% of the efficiency after 480 h aging in the air. This study shows the potential of achieving desirable HTL-free and MA-free Sn-Pb PSCs and offers more opportunities for tandem solar cells and other photovoltaic devices.

Chlorides, other Halides, and Pseudo-Halides as Additives for the Fabrication of Efficient and Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) are attracting a tremendous attention from the scientific community due to their excellent power conversion efficiency, low cost, and great promise for the future of solar energy. The best PSCs have already achieved a certified power conversion efficiency (PCE) of 25.5 % after an unprecedented rapid performance rise. However, high requirements with respect to large area, high-efficiency devices, and stability are still the challenges. Major efforts, especially for achieving a high degree of chemical control, have been made to reach these targets. The use of halide additives has played a critical role in improving the efficiency and stability. The present paper reviews the important breakthroughs in PSC technologies made by using halide additives, especially chloride, and pseudo-halide additives for the preparation of the perovskite layers, other layers, and interfaces of the devices. These additives help perovskite (PVK) crystallization and layer morphology control, grain boundary reduction, bulk and interface defects passivation, and so on. Normally, these halide additives play different roles depending on their categories and their location. Herein, recent progresses made due to additives employment in every possible layer of PSCs are reviewed, with focus on chloride, other halides, and pseudo-halides as additives in PVK films, halide additives in carrier transport layers, and at PVK-contact interfaces. Finally, an outlook of engineering of these additives in PSC progress is given.

Optoelectronic Properties of Tin-Lead Halide Perovskites

Mixed tin-lead halide perovskites have recently emerged as highly promising materials for efficient single- and multi-junction photovoltaic devices. This Focus Review discusses the optoelectronic properties that underpin this performance, clearly differentiating between intrinsic and defect-mediated mechanisms. We show that from a fundamental perspective, increasing tin fraction may cause increases in attainable charge-carrier mobilities, decreases in exciton binding energies, and potentially a slowing of charge-carrier cooling, all beneficial for photovoltaic applications. We discuss the mechanisms leading to significant bandgap bowing along the tin-lead series, which enables attractive near-infrared bandgaps at intermediate tin content. However, tin-rich stoichiometries still suffer from tin oxidation and vacancy formation which often obscures the fundamentally achievable performance, causing high background hole densities, accelerating charge-carrier recombination, lowering charge-carrier mobilities, and blue-shifting absorption onsets through the Burstein-Moss effect. We evaluate impacts on photovoltaic device performance, and conclude with an outlook on remaining challenges and promising future directions in this area.

GABr Post-Treatment for High-Performance MAPbI3 Solar Cells on Rigid Glass and Flexible Substrate

Perovskite solar cells have exhibited astonishing photoelectric conversion efficiency and have shown a promising future owing to the tunable content and outstanding optoelectrical property of hybrid perovskite. However, the devices with planar architecture still suffer from huge Voc loss and severe hysteresis effect. In this research, Guanidine hydrobromide (GABr) post-treatment is carried out to enhance the performance of MAPbI3 n-i-p planar perovskite solar cells. The detailed characterization of perovskite suggests that GABr post-treatment results in a smoother absorber layer, an obvious reduction of trap states and optimized energy level alignment. By utilizing GABr post-treatment, the Voc loss is reduced, and the hysteresis effect is alleviated effectively in MAPbI3 solar cells. As a result, solar cells based on glass substrate with efficiency exceeding 20%, Voc of 1.13 V and significantly mitigated hysteresis are fabricated successfully. Significantly, we also demonstrate the effectiveness of GABr post-treatment in flexible device, whose efficiency is enhanced from 15.77% to 17.57% mainly due to the elimination of Voc loss.

An Efficient and Stable Perovskite Solar Cell with Suppressed Defects by Employing Dithizone as a Lead Indicator

The defects in perovskite films are one of the most non-negligible factors that can attenuate the performances of perovskite solar cell. This work fabricates defect-reduced perovskite film by using the lead indicator (dithizone) as an additive of perovskite functional layer. The dithizone can retard the crystallization rate of perovskite films, passivate the defects, and enhance the structure stability of perovskite by coordinating with lead atoms. As a result, the device doped with dithizone yields outstanding power conversion efficiency and stability.

Narrow-Bandgap Mixed Lead/Tin-Based 2D Dion-Jacobson Perovskites Boost the Performance of Solar Cells

The advent of the two-dimensional (2D) family of halide perovskites and their demonstration in 2D/three-dimensional (3D) hierarchical film structures broke new ground toward high device performance and good stability. The 2D Dion-Jacobson (DJ) phase halide perovskites are especially attractive in solar cells because of their superior charge transport properties. Here, we report on 2D DJ phase perovskites using a 3-(aminomethyl)piperidinium (3AMP) organic spacer for the fabrication of mixed Pb/Sn-based perovskites, exhibiting a narrow bandgap of 1.27 eV and a long carrier lifetime of 657.7 ns. Consequently, solar cells employing mixed 2D DJ 3AMP-based and 3D MA_0.5FA_0.5Pb_0.5Sn_0.5I₃ (MA = methylammonium, FA = formamidinium) perovskite composites as light absorbers achieve enhanced efficiency and stability, giving a power conversion efficiency of 20.09% with a high open-circuit voltage of 0.88 V, a fill factor of 79.74%, and a short-circuit current density of 28.63 mA cm^-2. The results provide an effective strategy to improve the performance of single-junction narrow-bandgap solar cells and, potentially, to give a highly efficient alternative to bottom solar cells in tandem devices.