Borophene: New Sensation in Flatland

An electrochemical bio-electronic tongue based on borophene/PPy@ITO hybrid for selective caffeine identification

Caffeine is a natural stimulant found in various plants. Some individuals are particularly sensitive to caffeine and may experience adverse effects even with minimal intake. In order to address the potential health risks associated with high caffeine use, it is imperative to establish a precise, straightforward, efficient, and cost-efficient approach for measuring caffeine levels in regularly consumed items. This article explores electrochemical techniques for monitoring bitterness induced by caffeine. The fabricated bio-electronic tongue (Bio-ET) comprised a modified electrode made of borophene/PPy@ITO, created by electropolymerizing polypyrrole (PPy) onto indium tin oxide (ITO) and subsequently decorating it with borophene sheets. Cyclic voltammetry (CV) was used to investigate the electrochemical characteristics of caffeine on borophene/PPy@ITO. The findings revealed that the Bio-ET exhibited strong electro-oxidation and reduction activity towards caffeine, indicated by the presence of distinct redox peaks. The Bio-ET demonstrated a linear range from 0.5 to 700 μM with a limit of detection (LOD) of 0.177 μM. The Bio-ET electrode was successfully employed for caffeine quantification in real samples, including coffee, black tea, and regular tea, yielding excellent electrocatalytic performance. Furthermore, the potential of the Bio-ET system could lead to the development of portable, user-friendly devices for on-site analysis, facilitating rapid testing in various settings, such as beverages and pharmaceuticals, and presenting a promising direction for both research and commercial applications.

Doping of Mn2+ ion into boron quantum dots with enhanced fluorescence properties for sensing of L-thyroxine biomarker and bioimaging applications

L-thyroxine serves as a primary biomarker for diagnosing hypothyroidism and it is also utilized in hormone replacement therapy. Regular assessment of thyroxine levels is crucial for preventing health issues in hypothyroid patients, suggesting the requirement of a facile analytical tool for the detection of L-thyroxine. In this work, a straightforward and efficient synthetic method is introduced for in-situ preparation of Mn2+-doped boron quantum dots (Mn2+@B-QDs) derived from boron powder through a solvothermal reaction. The introduction of Mn2+ ion into B-QDs not only enhances fluorescence efficiency but also provides favorable sites within the QDs, expanding their potential applications in analytical chemistry. The blue fluorescent Mn2+ @B-QDs exhibited excellent performance for the selective recognition of L-thyroxine via a dynamic quenching mechanism. Under ideal conditions, a good linear relation was observed between the fluorescence emission intensity ratio of Mn2+@B-QDs and the concentration of L-thyroxine in the range of 0.125-5 μM, with a lower detection limit of 59.86 nM. The Mn2+@B-QDs exhibited the negligible cytotoxicity against A549 lung cancer cell lines and demonstrated good biocompatibility toward Saccharomyces cerevisiae cells.

Anti-bacterial efficacy of Boron Nanosheet against clinical isolates and its in vivo toxicity assessment using Artemiasalina

Microbes have been increasing their potential against newly developed drugs and antibiotics daily. The increased microbial drug resistance is still a challenging societal inconvenience. 2D nanomaterials, such as graphene, fascinate researchers with their unique physical and chemical properties and have a major role in current science and technology. Nowadays, researchers have been replacing graphene with its analogous 2D material, borophene, which is a single layer of boron with a honeycomb plane. Boron nanosheets which are theoretically investigated, have been synthesized by various top-down and bottom-up approaches. Our study focuses on synthesizing boron-based material from the precursor MgB2 which possesses a honeycomb boron structure with sandwiched Mg atoms. The Mg atoms have been selectively removed using the chelating agents at alkaline pH. The synthesized boron nanosheets have been characterized by FT-IR, Raman, XRD, FESEM, EDS, and TGA. The formation of B-H-B, B-B and B-O bond is confirmed by FT-IR and Raman spectra. It is also evident from XPS spectra which possess B1s spectra at 193 eV. The efficient chelation and exfoliation is confirmed by EDS and FESEM analysis which shows the presence of boron and trace amount of Mg with bark like projections. Though there are several studies on antibacterial activity of compounds, generally the studies are with laboratory cultures of bacterial strains. Clinical studies offer more valid results and are very sparse in literature. The use of clinical strains in the present study is one of the novelty. It has also been analyzed for its anti-bacterial activity against clinical strains of B. subtilis, S. aureus, E. coli, and K. pneumonia. Boron nanosheets possess an enhanced zone of inhibition (8 mm, 11 mm) against clinical strains of B. subtilis where the micro dilution studies show MIC and MBC values as 125 μg and 62.5 μg. The in vivo toxicity studies carried out using Brine Shrimp Lethality Assay reveal higher LC50 values of boron nanosheets (>1 mg/ml), which in turn portrays its non-toxic nature. Thus, the synthesized boron nanosheets are toxic to multidrug-resistant B. subtilis where it is non-toxic to mammalian cells. Thus, the study could advance the applications of borophene in biomedical applications.

Roadmap for Borophene Gas Sensors

Borophene, a two-dimensional allotrope of boron, has emerged as a promising material for gas sensing because of its exceptional electronic properties and high surface reactivity. This review comprehensively overviews borophene synthesis methods, properties, and sensing applications. However, it is crucial to acknowledge the substantial gap between the abundance of theoretical literature and the limited experimental studies. While theoretical investigations have elucidated the stability and remarkable sensing capabilities of various borophene polymorphs across different gases, significant experimental challenges have hindered the translation of these theoretical predictions into practical devices. Consequently, this review carefully studies these challenges and shortcomings that are jeopardizing the practical implementation of borophene in real-world settings. Specifically, four key issues are thoroughly studied, such as superficial borophene oxidation upon exposure to the air, interference from relative humidity on gas molecule detection, lack of selectivity, and synthesis scalability. Finally, novel strategies are proposed to overcome these bottlenecks. By adopting these approaches, borophene can pave the way to drive the advancement of the next generation of sensing devices.

Experimental Realization of Fluoroborophene

Borophene, an anisotropic metallic Dirac material exhibits superlative physical and chemical properties. While the lack of bandgap restricts its electronic chip applications, insufficient charge carrier density and electrochemical/catalytically active sites, restricts its energy storage and catalysis applications. Fluorination of borophene can induce bandgap and yield local electron injection within its crystallographic lattice. Herein, a facile synthesis of fluoroborophene with tunable fluorine content through potassium fluoride-assisted solvothermal-sonochemical combinatorial approach is reported. Fluoroborophene monolayers with lateral dimension 50 nm-5 µm are synthesized having controlled fluorine content (12-35%). Fluoroborophene exhibits inter-twinned crystallographic structure, with fluorination-tunable visible-range bandgap ≈1.5-2.5 eV, and density functional theory calculations also corroborate it. Fluoroborophene is explored for electrocatalytic oxygen evolution reaction in an alkaline medium and bestow a good stability. Tunable bandgap, electrophilicity and molecular anchoring capability of fluoroborophene will open opportunities for novel electronic/optoelectronic/spintronic chips, energy storage devices, and in numerous catalytic applications.

2D Materials for Potable Water Application: Basic Nanoarchitectonics and Recent Progresses

Water polluted by toxic chemicals due to waste from chemical/pharmaceuticals and harmful microbes such as E. Coli bacteria causes several fatal diseases; and therefore, water filtration is crucial for accessing clean and safe water necessary for good health. Conventional water filtration technologies include activated carbon filters, reverse osmosis, and ultrafiltration. However, they face several challenges, including high energy consumption, fouling, limited selectivity, inefficiencies in removing certain contaminants, dimensional control of pores, and structural/chemical changes at higher thermal conditions and upon prolonged usage of water filter. Recently, the advent of 2D materials such as graphene, BN, MoS2, MXenes, and so on opens new avenues for advanced water filtration systems. This review delves into the nanoarchitectonics of 2D materials for water filtration applications. The current state of water filtration technologies is explored, the inherent challenges they face are outlines, and the unique properties and advantages of 2D materials are highlighted. Furthermore, the scope of this review is discussed, which encompasses the synthesis, characterization, and application of various 2D materials in water filtration, providing insights into future research directions and potential industrial applications.

Graphene via Microwave Expansion of Graphite Followed by Cryo-Quenching and its Application in Electrostatic Droplet Switching

Monoelemental atomic sheets (Xenes) and other 2D materials offer record electronic mobility, high thermal conductivity, excellent Young's moduli, optical transparency, and flexural capability, revolutionizing ultrasensitive devices and enhancing performance. The ideal synthesis of these quantum materials should be facile, fast, scalable, reproducible, and green. Microwave expansion followed by cryoquenching (MECQ) leverages thermal stress in graphite to produce high-purity graphene within minutes. MECQ synthesis of graphene is reported at 640 and 800 W for 10 min, followed by liquid nitrogen quenching for 5 and 90 min of sonication. Microscopic and spectroscopic analyses confirmed the chemical identity and phase purity of monolayers and few-layered graphene sheets (200-12 µm). Higher microwave power yields thinner layers with enhanced purity. Molecular dynamics simulations and DFT calculations support the exfoliation under these conditions. Electrostatic droplet switching is demonstrated using MECQ-synthesized graphene, observing electrorolling of a mercury droplet on a BN/graphene interface at voltages above 20 V. This technique can inspire the synthesis of other 2D materials with high purity and enable new applications.

Advances In Borophene: Synthesis, Tunable Properties, and Energy Storage Applications

Monolayer boron nanosheet, commonly known as borophene, has garnered significant attention in recent years due to its unique structural, electronic, mechanical, and thermal properties. This review paper provides a comprehensive overview of the advancements in the synthetic strategies, tunable properties, and prospective applications of borophene, specifically focusing on its potential in energy storage devices. The review begins by discussing the various synthesis techniques for borophene, including molecular beam epitaxy (MBE), chemical vapor deposition (CVD), and chemical methods, such as ultrasonic exfoliation and thermal decomposition of boron-containing precursors. The tunable properties of borophene, including its electronic, mechanical, and thermal characteristics, are extensively reviewed, with discussions on its bandgap engineering, plasmonic behavior, and thermal conductivity. Moreover, the potential applications of borophene in energy storage devices, particularly as anode materials in metal-ion batteries and supercapacitors, along with its prospects in other energy storage systems, such as sodium-oxygen batteries, are succinctly, discussed. Hence, this review provides valuable insights into the synthesis, properties, and applications of borophene, offering much-desired guidance for further research and development in this promising area of nanomaterials science.

Unveiling the electronic and magnetic landscape of 3d transition metal doped hydrogenated borophenes: a first-principles study

In this study, density functional theory (DFT) simulations have been utilized to probe the intricate electronic and magnetic properties of pristine and 3d transition metal doped hydrogenated borophenes. It has been investigated through electronic structure calculations that the hydrogenation of 2-Pmmn borophene leads to the emergence of an in-plane Dirac cone, elucidating its transformation into a potential Dirac material with fortified stability. By employing spin-polarized DFT calculations with the Hubbard U correction, we have estimated the electronic and magnetic states of transition metal doped hydrogenated borophenes. Our analysis reveals that the Cr doped hydrogenated borophene manifests the highest magnetic moment of 4.76μB, making it a promising magnetic 2D material. Furthermore, the exchange energy has been calculated by considering the interaction between two transition metal atoms, to assess its magnetic state (ferromagnetic/antiferromagnetic/non-magnetic). The mean field theory and Heisenberg model have been utilized for Néel and Curie temperature estimation, corresponding to anti-ferromagnetic and ferromagnetic states respectively. The present study contributes to the design and understanding of Dirac materials with tailored electronic and magnetic characteristics, highlighting the potential for novel applications in electronics and spintronics. The insights gained from this work may pave the way for future experimental investigations and the realization of functionalized 2D materials with tunable properties.

The Rise of Xene Hybrids

Xenes, mono-elemental atomic sheets, exhibit Dirac/Dirac-like quantum behavior. When interfaced with other 2D materials such as boron nitride, transition metal dichalcogenides, and metal carbides/nitrides/carbonitrides, it enables them with unique physicochemical properties, including structural stability, desirable bandgap, efficient charge carrier injection, flexibility/breaking stress, thermal conductivity, chemical reactivity, catalytic efficiency, molecular adsorption, and wettability. For example, BN acts as an anti-oxidative shield, MoS2 injects electrons upon laser excitation, and MXene provides mechanical flexibility. Beyond precise compositional modulations, stacking sequences, and inter-layer coupling controlled by parameters, achieving scalability and reproducibility in hybridization is crucial for implementing these quantum materials in consumer applications. However, realizing the full potential of these hybrid materials faces challenges such as air gaps, uneven interfaces, and the formation of defects and functional groups. Advanced synthesis techniques, a deep understanding of quantum behaviors, precise control over interfacial interactions, and awareness of cross-correlations among these factors are essential. Xene-based hybrids show immense promise for groundbreaking applications in quantum computing, flexible electronics, energy storage, and catalysis. In this timely perspective, recent discoveries of novel Xenes and their hybrids are highlighted, emphasizing correlations among synthetic parameters, structure, properties, and applications. It is anticipated that these insights will revolutionize diverse industries and technologies.

Ultrathin Boron Growth onto Nanodiamond Surfaces via Electrophilic Boron Precursors

Diamond as a templating substrate is largely unexplored, and the unique properties of diamond, including its large bandgap, thermal conductance, and lack of cytotoxicity, makes it versatile in emergent technologies in medicine and quantum sensing. Surface termination of an inert diamond substrate and its chemical reactivity are key in generating new bonds for nucleation and growth of an overlayer material. Oxidized high-pressure high temperature (HPHT) nanodiamonds (NDs) are largely terminated by alcohols that act as nucleophiles to initiate covalent bond formation when an electrophilic reactant is available. In this work, we demonstrate a templated synthesis of ultrathin boron on ND surfaces using trigonal boron compounds. Boron trichloride (BCl3), boron tribromide (BBr3), and borane (BH3) were found to react with ND substrates at room temperature in inert conditions. BBr3 and BCl3 were highly reactive with the diamond surface, and sheet-like structures were produced and verified with electron microscopy. Surface-sensitive spectroscopies were used to probe the molecular and atomic structure of the ND constructs' surface, and quantification showed the boron shell was less than 1 nm thick after 1-24 h reactions. Observation of the reaction supports a self-terminating mechanism, similar to atomic layer deposition growth, and is likely due to the quenching of alcohols on the diamond surface. X-ray absorption spectroscopy revealed that boron-termination generated midgap electronic states that were originally predicted by density functional theory (DFT) several years ago. DFT also predicted a negative electron surface, which has yet to be confirmed experimentally here. The boron-diamond nanostructures were found to aggregate in dichloromethane and were dispersed in various solvents and characterized with dynamic light scattering for future cell imaging or cancer therapy applications using boron neutron capture therapy (BNCT). The unique templating mechanism based on nucleophilic alcohols and electrophilic trigonal precursors allows for covalent bond formation and will be of interest to researchers using diamond for quantum sensing, additive manufacturing, BNCT, and potentially as an electron emitter.

Borophene: a piezocatalyst for water remediation

Borophene is an emerging two-dimensional material exhibiting exceptional piezocatalytic activity under the influence of ultrasonic vibrations, as exemplified herein by the decomposition of highly stable organic dyes in water. After 6 minutes of exposure, borophene sheets converted up to 92 percent of a mixture of dye molecules at room temperature.

Ultrafast switching in spin field-effect transistors based on borophene nanoribbons

Borophene, owing to the high mobility and long spin coherent length of its carriers, presents significant opportunities in ultrafast spintronics. In this research, we investigate the spin-dependent conductance of a Datta-Das field-effect transistor (FET) based on an armchair β12-borophene nanoribbon (BNR) using the tight-binding (TB) Hamiltonian in combination with the non-equilibrium Green's function (NEGF) method. The spin FET electrodes are magnetized by ferromagnetic (FM) insulators arranged in both parallel and anti-parallel configurations. This device acts as a controllable spin filter in the presence of Rashba spin-orbit coupling (SOC) for both configurations and its spin current is well modulated by a gate voltage and the strength of the Rashba SOC. For anti-parallel configurations, an energy gap emerges within a certain range of incoming electron energy which can disappear for electrons with flipped spin under the Rashba SOC. Furthermore, our findings indicate that the electron-electron (e-e) interaction helps the spin precession of electrons injected into the spin FET channel, thereby strengthening the Rashba SOC effect. Notably, a gate voltage can adjust the current-voltage (I-V) characteristics of this device. Finally, our calculations demonstrate that under the same conditions, the current magnitude and Ion/Ioff ratio of borophene spin FETs are several times higher than those of graphene and silicene spin FETs.

Mechanism of electrocatalytic CO2 reduction reaction by borophene supported bimetallic catalysts

Bimetal atom catalysts (BACs) hold significant potential for various applications as a result of the synergistic interaction between adjacent metal atoms. This interaction leads to improved catalytic performance, while simultaneously maintaining high atomic efficiency and exceptional selectivity, similar to single atom catalysts (SACs). Bimetallic site catalysts (M2β12) supported by β12-borophene were developed as catalysts for electrocatalytic carbon dioxide reduction reaction (CO2RR). The research on density functional theory (DFT) demonstrates that M2β12 exhibits exceptional stability, conductivity, and catalytic activity. Investigating the most efficient reaction pathway for CO2RR by analyzing the Gibbs free energy (ΔG) during potential determining steps (PDS) and choosing a catalyst with outstanding catalytic performance for CO2RR. The overpotential required for Fe2β12 and Ag2β12 to generate CO is merely 0.05 V. This implies that the conversion of CO2 to CO can be accomplished with minimal additional voltage. The overpotential values for Cu2β12 and Ag2β12 during the formation of HCOOH were merely 0.001 and 0.07 V, respectively. Furthermore, the Rh2β12 catalyst exhibits a relatively low overpotential of 0.51 V for CH3OH and 0.65 V for CH4. The Fe2β12 produces C2H4 through the *CO-*CO pathway, while Ag2β12 generates CH3CH2OH via the *CO-*CHO coupling pathway, with remarkably low overpotentials of 0.84 and 0.60 V, respectively. The study provides valuable insights for the systematic design and screening of electrocatalysts for CO2RR that exhibit exceptional catalytic performance and selectivity.

Boron nanosheets boosting solar thermal water evaporation

Hydrogel-based solar vapour generators (SVGs) are promising for wastewater treatment and desalination. The performance of SVG systems is governed by solar thermal conversion and water management. Progress has been made in achieving high energy conversion efficiency, but the water evaporation rates are still unsatisfactory under 1 sun irradiation. This study introduced novel two-dimensional (2D) boron nanosheets as additives into hydrogel-based SVGs. The resulting SVGs exhibit an outstanding evaporation rate of 4.03 kg m-2 h-1 under 1 sun irradiation. This significant improvement is attributed to the 2D boron nanosheets, which leads to the formation of a higher content of intermediate water and reduced water evaporation enthalpy to 845.11 kJ kg-1. The SVGs into which boron nanosheets were incorporated also showed high salt resistance and durability, demonstrating their great potential for desalination applications.

Substrate-induced strain and exchange field effects on the electronic and thermal properties of monolayer β12-borophene

The recently uncovered two-dimensional materials serve as versatile building blocks for electronic devices. In this study, we methodically investigate the impact of substrate-induced strain and exchange field effects on the electronic density of states (EDOS) and electronic heat capacity (EHC) of single-layer β12-borophene. Utilizing the Green's function approach, we compute these functions. The van Hove singularities in EDOS are observed to shift with strain, and depending on the direction and strength of the exchange field, the number of singularities increases. All these responses can be attributed to the renormalization of the velocity of electronic bands. Additionally, the inherent Schottky anomaly (an unusual peak at low temperatures) in the EHC undergoes a notable shift to higher and lower temperatures and variations in the intensity of the EHC due to substrate effects.

2D Materials in Flexible Electronics: Recent Advances and Future Prospectives

Flexible electronics have recently gained considerable attention due to their potential to provide new and innovative solutions to a wide range of challenges in various electronic fields. These electronics require specific material properties and performance because they need to be integrated into a variety of surfaces or folded and rolled for newly formatted electronics. Two-dimensional (2D) materials have emerged as promising candidates for flexible electronics due to their unique mechanical, electrical, and optical properties, as well as their compatibility with other materials, enabling the creation of various flexible electronic devices. This article provides a comprehensive review of the progress made in developing flexible electronic devices using 2D materials. In addition, it highlights the key aspects of materials, scalable material production, and device fabrication processes for flexible applications, along with important examples of demonstrations that achieved breakthroughs in various flexible and wearable electronic applications. Finally, we discuss the opportunities, current challenges, potential solutions, and future investigative directions about this field.

Multi-doped borophene catalysts with engineered defects for CO2 reduction: A DFT study

Carbon dioxide reduction reaction (CO2RR) to convert carbon dioxide (CO2) into value-added products via the electrochemical method is a conducive way to tackle the hazard of high CO2 emissions. The present DFT study reports a novel dual chromium-anchored tri-vacancy borophene (Cr2/TV-β12) electrocatalyst, which showed high selectivity and stability for CO2RR. A tri-vacancy defect was introduced in β12 borophene to create an 11-membered ring borophene sheet (TV-β12), and 28 different electrocatalysts were explored via doping various transition metals (Co, Cr, Cu, Fe, Mn, Ni, Zn). Density functional theory simulation results revealed that the Cr2/TV-β12 electrocatalyst adsorbs and activates CO2 efficiently, which was validated by the partial density of states, charge density difference, Bader charge, and crystal orbital Hamilton population analyses. The limiting potential for CO2RR was evaluated to be -0.45 V, against hydrogen evolution reaction (HER) (0.57 V), with the main product being formaldehyde. The catalyst showed selectivity towards CO2 reduction and suppressed HER. The usual problem of carbon monoxide poisoning encountered in CO2 reduction was also assessed and a high resistance against the same was established. At the outset, the research revealed that dual atom-doped tri-vacancy β12 borophene has tremendous potential to be utilized as an efficient catalyst for CO2RR.

Gas Sensing Properties of Pd-Decorated GeSe Monolayer toward Formaldehyde and Benzene Molecules: A First-Principles Study

In this study, the gas sensing properties of formaldehyde (HCHO) and benzene (C6H6) adsorbed on two-dimensional (2D) pristine GeSe and Pd-decorated GeSe (Pd-GeSe) monolayers are studied by using first-principles calculations. The adsorption energies, electronic properties, optical properties, sensitivity, and recovery time of the gas adsorption systems have been thoroughly investigated. It is found that the adsorption of C6H6 on two substrate surfaces and the adsorption of HCHO on pristine GeSe are examples of physical adsorption. However, after HCHO adsorption on the Pd-GeSe monolayer, the adsorption system exhibits an increased adsorption energy of -1.21 eV, which is more favorable compared with the other adsorption systems studied. Moreover, the electron localization function and charge transfer from Pd-GeSe to HCHO are significantly enhanced, indicating distinct chemical adsorption behavior. Furthermore, it demonstrates a larger band gap change rate of 18.8% and a significant enhancement of optical absorption upon the adsorption of HCHO on the Pd-GeSe monolayer. Additionally, the appropriate sensitivity and moderate recovery time for the adsorption of HCHO on the Pd-GeSe surface indicate that the Pd-GeSe monolayer possesses an outstanding sensing capability for HCHO gas.

MXene and Xene: promising frontier beyond graphene in tissue engineering and regenerative medicine

The emergence of 2D nanomaterials (2D NMs), which was initiated by the isolation of graphene (G) in 2004, revolutionized various biomedical applications, including bioimaging and -sensing, drug delivery, and tissue engineering, owing to their unique physicochemical and biological properties. Building on the success of G, a novel class of monoelemental 2D NMs, known as Xenes, has recently emerged, offering distinct advantages in the fields of tissue engineering and regenerative medicine. In this review, we focus on the comparison of G and Xene materials for use in fabricating tissue engineering scaffolds. After a brief introduction to the basic physicochemical properties of these materials, recent representative studies are classified in terms of the engineered tissue, i.e., bone, cartilage, neural, muscle, and skin tissues. We analyze several methods of improving the clinical potential of Xene-laden scaffolds using state-of-the-art fabrication technologies and innovative biomaterials. Despite the considerable advantages of Xene materials, critical concerns, such as biocompatibility, biodistribution and regulatory challenges, should be considered. This review and collaborative efforts should advance the field of Xene-based tissue engineering and enable innovative, effective solutions for use in future tissue regeneration.

Magnetic semiconducting borophenes and their derivatives

Two semiconducting borophenes with layer-dependent magnetism are predicted based on spin-polarized density functional theory. Both monolayer borophenes are ferromagnetic. One is composed of B3 and B15 triangular motifs, exhibiting bipolar spin polarization and a magnetic moment of 1.00 μB per primitive cell. The other consists of B15 triangular motifs, possessing a Curie temperature of about 437 K and a magnetic moment of 3.00 μB per primitive cell. B atoms located between the triangular motifs are essential for inducing ferromagnetism in monolayer borophenes. However, bilayer borophenes with high-symmetry stacking orders are nonmagnetic. Furthermore, magnetic boron nanotubes and fullerenes could be made of monolayer borophenes. Finally, we propose to fabricate these magnetic semiconducting borophenes from the buckled triangular structure of borophenes via selective electron beam ionization of B atoms by scanning transmission electron microscopy.

Multifunctional carbon nitride nanoarchitectures for catalysis

Catalysis is at the heart of modern-day chemical and pharmaceutical industries, and there is an urgent demand to develop metal-free, high surface area, and efficient catalysts in a scalable, reproducible and economic manner. Amongst the ever-expanding two-dimensional materials family, carbon nitride (CN) has emerged as the most researched material for catalytic applications due to its unique molecular structure with tunable visible range band gap, surface defects, basic sites, and nitrogen functionalities. These properties also endow it with anchoring capability with a large number of catalytically active sites and provide opportunities for doping, hybridization, sensitization, etc. To make considerable progress in the use of CN as a highly effective catalyst for various applications, it is critical to have an in-depth understanding of its synthesis, structure and surface sites. The present review provides an overview of the recent advances in synthetic approaches of CN, its physicochemical properties, and band gap engineering, with a focus on its exclusive usage in a variety of catalytic reactions, including hydrogen evolution reactions, overall water splitting, water oxidation, CO2 reduction, nitrogen reduction reactions, pollutant degradation, and organocatalysis. While the structural design and band gap engineering of catalysts are elaborated, the surface chemistry is dealt with in detail to demonstrate efficient catalytic performances. Burning challenges in catalytic design and future outlook are elucidated.

Prediction of a planar BxP monolayer with inherent metallicity and its potential as an anode material for Na and K-ion batteries: a first-principles study

Borophene, the lightest two-dimensional material, exhibits exceptional storage capacity as an anode material for sodium-ion batteries (NIBs) and potassium-ion batteries (PIBs). However, the pronounced surface activity gives rise to strong interfacial bonding between borophene and the metal substrate it grows on. Incorporation of heterogeneous atoms capable of forming strong bonds with boron to increase borophene stability while preserving its intrinsic metallic conductivity and high theoretical capacity remains a great challenge. In this study, a particle swarm optimization (PSO) method was employed to determine several new two-dimensional monolayer boron phosphides (BxP, x = 3-6) with rich boron components. The obtained BxP has great potential to be used as an anode material for sodium-ion batteries/potassium-ion batteries (SIBs/PIBs), according to DFT calculations. BxP demonstrates remarkable stability compared with borophene which ensures their feasibility of experimental synthesis. Moreover, B5P and B6P exhibit high electronic conductivity and ionic conductivity, with migration energy barriers of 0.20 and 0.21 eV for Na ions and 0.07 eV for K ions. Moreover, the average open circuit voltage falls within a favorable range of 0.25-0.73 V, which results in a high storage capacity of 1119-2103 mA h g-1 for SIBs and 631-839 mA h g-1 for PIBs. This study paves the way for exploring boron-rich 2D electrode materials for energy applications and provides valuable insights into the functionalization and stabilization of borophene.

Covalent organic frameworks: linkage types, synthetic methods and bio-related applications

Covalent organic frameworks (COFs) are composed of small organic molecules linked via covalent bonds, which have tunable mesoporous structure, good biocompatibility and functional diversities. These excellent properties make COFs a promising candidate for constructing biomedical nanoplatforms and provide ample opportunities for nanomedicine development. A systematic review of the linkage types and synthesis methods of COFs is of indispensable value for their biomedical applications. In this review, we first summarize the types of various linkages of COFs and their corresponding properties. Then, we highlight the reaction temperature, solvent and reaction time required by different synthesis methods and show the most suitable synthesis method by comparing the merits and demerits of various methods. To appreciate the cutting-edge research on COFs in bioscience technology, we also summarize the bio-related applications of COFs, including drug delivery, tumor therapy, bioimaging, biosensing and antimicrobial applications. We hope to provide insight into the interdisciplinary research on COFs and promote the development of COF nanomaterials for biomedical applications and their future clinical translations.

Influence of plasma kinetic energy during the pulsed laser deposition of borophene films on silicon (100)

Developing borophene films with good structural stability on non-metallic substrates to maximize their potential in photosensitivity, gas detection, photothermia, energy storage, and deformation detection, among others has been challenging in recent years. Herein, we succeeded in the pulsed laser deposition of multilayered borophene films on Si (100) with β12 or χ3 bonding by tuning the mean kinetic energy in the plasma during the deposition process. Raman and X-ray photoelectron spectroscopies confirm β12 and χ3 bonding in the films. Borophene films with β12 bonding were obtained by tuning a high mean kinetic energy in the plasma, while borophene with χ3 bonding required a relatively low mean kinetic energy. Atomic force microscopy (AFM) micrographs revealed a granular and directional growth of the multilayered borophene films following the linear atomic terraces from the (100) silicon substrate. AFM nanofriction was used to access the borophene surfaces and to reveal the pull-off force and friction coefficient of the films where the surface oxide showed a significant contribution. To summarize, we show that it is possible to deposit multilayered borophene thin films with different bondings by tuning the mean kinetic energy during pulsed laser deposition. The characterization of the plasma during borophene deposition accompanies our findings, providing support for the changes in kinetic energy.

Introducing Structures from Hexagonal Borophene to Nitrophene and Their Thermal Conductivity Investigation Using a Reactive Molecular Dynamics Simulation

In the present work, the thermal conductivity (TC) of hexagonal structures of boron nitride and borophene was investigated by a reactive molecular dynamics (MD) simulation. Also, to figure out the effect of the boron and nitrogen in the hexagonal structure, five other hypothetical structures were created (in addition to the structure of boron nitride and borophene) and their structures were represented by the symbol BxNy, where x refers to the number of boron atoms and y refers to the number of nitrogen atoms. In this regard, B6N0 refers to borophene, B3N3 is boron nitride, and B0N6 is called nitrophene. The TC of B6N0 and B3N3 structures was calculated and compared with the literature values. Besides these two compounds, the five other structures have not been experimentally synthesized yet, so the TC of the five other hypothetical structures were predicted in the present work. The lowest TC belonged to B3N3, and the highest one was for B0N6. Based on the inherent potential of reactive MD simulation, during TC calculation, atoms' coordination and partial charges are changed and new bonds, rings, or even defects were automatically created on the surfaces. The coordination contour map showed that in B3N3, the atoms have collective movements like a large and single wave, while B0N6 and B6N0 have small group movements as vibrations. So, it became clear that the higher stability of structures caused more curved movements. In addition, the contour map of partial charges is calculated, and the results showed that the high differences in partial charge between atoms in the structure cause high TC, while small charge differences in the structure inhibit heat transfer and cause lower TC.

Adsorption Features of Tetrahalomethanes (CX4; X = F, Cl, and Br) on β12 Borophene and Pristine Graphene Nanosheets: A Comparative DFT Study

The potentiality of the β₁₂ borophene (β₁₂) and pristine graphene (GN) nanosheets to adsorb tetrahalomethanes (CX₄; X = F, Cl, and Br) were investigated using density functional theory (DFT) methods. To provide a thorough understanding of the adsorption process, tetrel (XC-X₃∙∙∙β₁₂/GN)- and halogen (X₃C-X∙∙∙β₁₂/GN)-oriented configurations were characterized at various adsorption sites. According to the energetic manifestations, the adsorption process of the CX₄∙∙∙β₁₂/GN complexes within the tetrel-oriented configuration led to more desirable negative adsorption energy (E_ads) values than that within the halogen-oriented analogs. Numerically, E_ads values of the CBr₄∙∙∙Br1@β₁₂ and T@GN complexes within tetrel-/halogen-oriented configurations were -12.33/-8.91 and -10.03/-6.00 kcal/mol, respectively. Frontier molecular orbital (FMO) results exhibited changes in the E_HOMO, E_LUMO, and E_gap values of the pure β₁₂ and GN nanosheets following the adsorption of CX₄ molecules. Bader charge transfer findings outlined the electron-donating property for the CX₄ molecules after adsorbing on the β₁₂ and GN nanosheets within the two modeled configurations, except the adsorbed CBr₄ molecule on the GN sheet within the tetrel-oriented configuration. Following the adsorption process, new bands and peaks were observed in the band structure and density of state (DOS) plots, respectively, with a larger number in the case of the tetrel-oriented configuration than in the halogen-oriented one. According to the solvent effect affirmations, adsorption energies of the CX₄∙∙∙β₁₂/GN complexes increased in the presence of a water medium. The results of this study will serve as a focal point for experimentalists to better comprehend the adsorption behavior of β₁₂ and GN nanosheets toward small toxic molecules.

Exploring the Potential Applications of Engineered Borophene in Nanobiosensing and Theranostics

A monolayer of boron known as borophene has emerged as a novel and fascinating two-dimensional (2D) material with exceptional features, such as anisotropic metallic behavior and supple mechanical and optical capabilities. The engineering of smart functionalized opto-electric 2D materials is essential to obtain biosensors or biodevices of desired performance. Borophene is one of the most emerging 2D materials, and owing to its excellent electroactive surface area, high electron transport, anisotropic behavior, controllable optical and electrochemical properties, ability to be deposited on thin films, and potential to create surface functionalities, it has recently become one of the sophisticated platforms. Despite the difficulty of production, borophene may be immobilized utilizing chemistries, be functionalized on a flexible substrate, and be controlled over electro-optical properties to create a highly sensitive biosensor system that could be used for point-of-care diagnostics. Its electrochemical properties can be tailored by using appropriate nanomaterials, redox mediators, conducting polymers, etc., which will be quite useful for the detection of biomolecules at even trace levels with a high sensitivity and less detection time. This will be quite helpful in developing biosensing devices with a very high sensitivity and with less response time. So, this review will be a crucial foundation as we have discussed the basic properties, synthesis, and potential applications of borophene in nanobiosensing, as well as therapeutic applications.

Ball milling induced borophene flakes fabrication

To fill the knowledge gap for borophene, as the youngest member of the two-dimensional (2D) nanomaterials family, a facile, cost effective, scalable and reproducible fabrication route is still strongly required. Among so far studied techniques the potential of pure mechanical processes such as ball milling is not explored yet. Therefore, in this contribution, we explore the efficiency to exfoliate bulk boron into a few-layered borophene induced by mechanical energy in the planetary ball mill. It was revealed that the resulting flakes thickness and distribution can be controlled by (i) rotation speed (250-650 rpm), (ii) time of ball-milling (1-12 hours), and mass loading of bulk boron (1-3 g). Furthermore, the optimal conditions for the ball-milling process to induce efficient mechanical exfoliation of boron were determined to be 450 rpm, 6 hours, and 1 g (450 rpm_6 h_1 g), which resulted in the fabrication of regular and thin few-layered borophene flakes (∼5.5 nm). What is more, the mechanical energy induced during ball-milling, and the heat generated inside, affected the structure of borophene resulting in different crystalline phases. Besides being an additional and interesting discovery, it will also open up opportunities to investigate the relevance between the properties and the emerging phase. Structures labeled as β-rhombohedral, γ-orthorhombic, τ-B and the conditions under which they appear, have been described. Therefore, in our study, we open a new door to obtain a bulk quantity of few-layered borophene for further fundamental studies and practical potential assessment.

Ag+-doped boron quantum dots with enhanced stability and fluorescence enabling versatile practicality in visual detection, sensing, imaging and photocatalytic degradation

In this work, a metal-doping strategy was put forward to construct metal-doped borophene and the corresponding zero-dimensional boron. Through theoretical calculations, Ag⁺ acts as the optimal metal ions to prepare Ag⁺-doped borophene derived boron quantum dots (Ag-BQDs). As predicted theoretically, doping of Ag⁺ endows borophene with enhanced stability of electronic structures. The newly emerging Ag-BQDs were experimentally acquired from ultrasonic-assisted liquid-phase exfoliation of bulk boron and solvothermal treatments. According to theoretical and experimental studies, the improved stability and fluorescence (FL) of Ag-BQDs are due to the formation of strong B-Ag bonding to competitively suppress B-O bonding. The function enables the maximal protection of borophene electronic structures from oxidization, destruction and reconfiguration. Because of Ag-BQDs with relatively higher colloidal and FL stability over BQDs, potential applications of Ag-BQDs were further explored in promising fields toward FL visualization in aqueous solutions and on filter paper, employed as a chemosensor of Fe³⁺ for FL sensing and visual detection at the solid/liquid phases, utilized for multiple FL bio-imaging at the levels of fresh plants, live animals and live cells of fresh plants, and applied to photocatalytic degradation of organic dyes and anticancer drug. Experimental results demonstrate excellent performances of Ag-BQDs in multiple applications, including versatile FL sensing and visual detection, unique multi-channel FL bio-imaging and visible-light-driven photodegradation of organic pollutants, toxic and harmful substances. This work can promote the development of metal-ion-doped low- dimensional nanomaterials with improved stability and FL properties for significant applications.

Materials Innovations for Quantum Technology Acceleration: A Perspective

A broad perspective of quantum technology state of the art is provided and critical stumbling blocks for quantum technology development are identified. Innovations in demonstrating and understanding electron entanglement phenomena using bulk and low-dimensional materials and structures are summarized. Correlated photon-pair generation via processes such as nonlinear optics is discussed. Application of qubits to current and future high-impact quantum technology development is presented. Approaches for realizing unique qubit features for large-scale encrypted communication, sensing, computing, and other technologies are still evolving; thus, materials innovation is crucially important. A perspective on materials modeling approaches for quantum technology acceleration that incorporate physics-based AI/ML, integrated with quantum metrology is discussed.

The Integration of Biopolymer-Based Materials for Energy Storage Applications: A Review

Biopolymers are an emerging class of novel materials with diverse applications and properties such as superior sustainability and tunability. Here, applications of biopolymers are described in the context of energy storage devices, namely lithium-based batteries, zinc-based batteries, and capacitors. Current demand for energy storage technologies calls for improved energy density, preserved performance overtime, and more sustainable end-of-life behavior. Lithium-based and zinc-based batteries often face anode corrosion from processes such as dendrite formation. Capacitors typically struggle with achieving functional energy density caused by an inability to efficiently charge and discharge. Both classes of energy storage need to be packaged with sustainable materials due to their potential leakages of toxic metals. In this review paper, recent progress in energy applications is described for biocompatible polymers such as silk, keratin, collagen, chitosan, cellulose, and agarose. Fabrication techniques are described for various components of the battery/capacitors including the electrode, electrolyte, and separators with biopolymers. Of these methods, incorporating the porosity found within various biopolymers is commonly used to maximize ion transport in the electrolyte and prevent dendrite formations in lithium-based, zinc-based batteries, and capacitors. Overall, integrating biopolymers in energy storage solutions poses a promising alternative that can theoretically match traditional energy sources while eliminating harmful consequences to the environment.

Far-field thermal properties of β12 borophene under an external electric field

Borophene has been reported as the latest very promising 2D material. We theoretically investigate the thermal radiation of β₁₂ borophene. β₁₂ borophene has been composited on Ag substrate. Theoretical research frequently mentions three types of model of β₁₂ borophene. The energy bands of the three models are different. Homogeneous and inversion symmetric models have a gapless Dirac cone near the K(K') point, while they are gapped in the inversion non-symmetric model. The homogeneous model has gapless triplet fermions and three-band touching points at high-symmetry points. The optical conductivity exhibits peaks due to the energy transition of high-symmetry points. The radiation spectrum follows Wien's displacement law in homogeneous and inversion symmetric models, while it is broken in the inversion non-symmetric model. The total energy radiation changes as the voltage increases for the three β₁₂ borophene models. The radiation of energy can be controlled by applying a suitable voltage.

Metal-Doped Boron Quantum Dots for Versatile Detection of Lactate and Fluorescence Bioimaging

To improve the stability and fluorescence (FL) of monoelemental boron nanomaterials, this work put forward a metal-coordination strategy to explore emerging metal-doped boron quantum dots, Co@BQDs. Through theoretical calculations, B-Co bonding as predicted can suppress the B-O reaction and protect the electronic structures of exfoliated two-dimensional (2D) boron from oxidation and decomposition upon exposure to oxygen. In experimental studies, Co²⁺ was added into a dispersion liquid of bulk boron and subjected to probe sonication to promote Co²⁺ adsorption on the surface of exfoliated 2D boron, followed by Co²⁺ coordination with exposed boron atoms. Solvothermal treatment of exfoliated 2D boron resulted in the generation of Co²⁺-doped 0D boron Co@BQDs. Experimental results confirm that Co@BQDs have higher colloidal and FL stability than BQDs as a reference. B-Co bonding formation to suppress the B-O reaction ensures the high stability of exfoliated boron structures. A dispersion liquid of Co@BQDs with stable and bright FL was used for visual FL imaging of solutions and solid substrates. Based on enzymatic and cascade oxidation-induced FL quenching of Co@BQDs, a novel FL bio-probe of lactate was explored. This bio-probe, with a broad detection range of 0.01-10 mM and a low detection limit of 3.1 μM, enables FL sensing of lactate in biosamples and shows high detection recoveries of 98.0-102.8%. Moreover, this bio-probe realized versatile FL imaging and visual detection of lactate in liquid/solid-phase systems. These results demonstrate great prospects of Co@BQDs as emerging and efficient imaging reagents for long-term tracking and bioimaging applications.

A Rising 2D Star: Novel MBenes with Excellent Performance in Energy Conversion and Storage

As a flourishing member of the two-dimensional (2D) nanomaterial family, MXenes have shown great potential in various research areas. In recent years, the continued growth of interest in MXene derivatives, 2D transition metal borides (MBenes), has contributed to the emergence of this 2D material as a latecomer. Due to the excellent electrical conductivity, mechanical properties and electrical properties, thus MBenes attract more researchers' interest. Extensive experimental and theoretical studies have shown that they have exciting energy conversion and electrochemical storage potential. However, a comprehensive and systematic review of MBenes applications has not been available so far. For this reason, we present a comprehensive summary of recent advances in MBenes research. We started by summarizing the latest fabrication routes and excellent properties of MBenes. The focus will then turn to their exciting potential for energy storage and conversion. Finally, a brief summary of the challenges and opportunities for MBenes in future practical applications is presented.

Iron Oxide Nanoparticle-Based Ferro-Nanofluids for Advanced Technological Applications

Iron oxide nanoparticle (ION)-based ferro-nanofluids (FNs) have been used for different technological applications owing to their excellent magneto-rheological properties. A comprehensive overview of the current advancement of FNs based on IONs for various engineering applications is unquestionably necessary. Hence, in this review article, various important advanced technological applications of ION-based FNs concerning different engineering fields are critically summarized. The chemical engineering applications are mainly focused on mass transfer processes. Similarly, the electrical and electronics engineering applications are mainly focused on magnetic field sensors, FN-based temperature sensors and tilt sensors, microelectromechanical systems (MEMS) and on-chip components, actuators, and cooling for electronic devices and photovoltaic thermal systems. On the other hand, environmental engineering applications encompass water and air purification. Moreover, mechanical engineering or magneto-rheological applications include dampers and sealings. This review article provides up-to-date information related to the technological advancements and emerging trends in ION-based FN research concerning various engineering fields, as well as discusses the challenges and future perspectives.

A Facile, Fabric Compatible, and Flexible Borophene Nanocomposites for Self-Powered Smart Assistive and Wound Healing Applications

Smart fabrics that can harvest ambient energy and provide diverse sensing functionality via triboelectric effects have evoked great interest for next-generation healthcare electronics. Herein, a novel borophene/ecoflex nanocomposite is developed as a promising triboelectric material with tailorability, durability, mechanical stability, and flexibility. The addition of borophene nanosheets enables the borophene/ecoflex nanocomposite to exhibit tunable surface triboelectricity investigated by Kelvin probe force microscopy. The borophene/ecoflex nanocomposite is further fabricated into a fabric-based triboelectric nanogenerator (B-TENG) for mechanical energy harvesting, medical assistive system, and wound healing applications. The durability of B-TENG provides consistent output performance even after severe deformation treatments, such as folding, stretching, twisting, and washing procedures. Moreover, the B-TENG is integrated into a smart keyboard configuration combined with a robotic system to perform an upper-limb medical assistive interface. Furthermore, the B-TENG is also applied as an active gait phase sensing system for instantaneous lower-limb gait phase visualization. Most importantly, the B-TENG can be regarded as a self-powered in vitro electrical stimulation device to conduct continuous wound monitoring and therapy. The as-designed B-TENG not only demonstrates great potential for multifunctional self-powered healthcare sensors, but also for the promising advancements toward wearable medical assistive and therapeutic systems.

Microwave Synthesized 2D Gold and Its 2D-2D Hybrids

Xenes, i.e., monoelemental two-dimensional atomic sheets, are promising for sensitive and ultrafast sensor applications owing to exceptional carrier mobility; however, most of them oxidize below 500 °C and therefore cannot be employed for high-temperature applications. 2D gold, an oxidation-resistant plasmonic Xene, is extremely promising. 2D gold was experimentally realized by both atomic layer deposition and chemical synthesis using sodium citrate. However, it is imperative to develop a new facile single-step method to synthesize 2D gold. Here, liquid-phase synthesis of 2D gold is demonstrated by microwave exposure to auric chloride dispersed in dimethylformamide. Microscopies (AFM and high-resolution TEM), spectroscopies (Raman, UV-vis, and X-ray photoelectron), and X-ray diffraction establish the formation of a hexagonal crystallographic phase for 2D gold. 2D-2D hybrids of 2D gold have also been synthesized and investigated for electronic/optoelectronic behaviors and SERS-based molecular sensing. DFT band structure calculation for 2D gold and its hybrids corroborates the experimental findings.

2D materials: increscent quantum flatland with immense potential for applications

Quantum flatland i.e., the family of two dimensional (2D) quantum materials has become increscent and has already encompassed elemental atomic sheets (Xenes), 2D transition metal dichalcogenides (TMDCs), 2D metal nitrides/carbides/carbonitrides (MXenes), 2D metal oxides, 2D metal phosphides, 2D metal halides, 2D mixed oxides, etc. and still new members are being explored. Owing to the occurrence of various structural phases of each 2D material and each exhibiting a unique electronic structure; bestows distinct physical and chemical properties. In the early years, world record electronic mobility and fractional quantum Hall effect of graphene attracted attention. Thanks to excellent electronic mobility, and extreme sensitivity of their electronic structures towards the adjacent environment, 2D materials have been employed as various ultrafast precision sensors such as gas/fire/light/strain sensors and in trace-level molecular detectors and disease diagnosis. 2D materials, their doped versions, and their hetero layers and hybrids have been successfully employed in electronic/photonic/optoelectronic/spintronic and straintronic chips. In recent times, quantum behavior such as the existence of a superconducting phase in moiré hetero layers, the feasibility of hyperbolic photonic metamaterials, mechanical metamaterials with negative Poisson ratio, and potential usage in second/third harmonic generation and electromagnetic shields, etc. have raised the expectations further. High surface area, excellent young's moduli, and anchoring/coupling capability bolster hopes for their usage as nanofillers in polymers, glass, and soft metals. Even though lab-scale demonstrations have been showcased, large-scale applications such as solar cells, LEDs, flat panel displays, hybrid energy storage, catalysis (including water splitting and CO2 reduction), etc. will catch up. While new members of the flatland family will be invented, new methods of large-scale synthesis of defect-free crystals will be explored and novel applications will emerge, it is expected. Achieving a high level of in-plane doping in 2D materials without adding defects is a challenge to work on. Development of understanding of inter-layer coupling and its effects on electron injection/excited state electron transfer at the 2D-2D interfaces will lead to future generation heterolayer devices and sensors.

Monoelemental two-dimensional boron nanomaterials beyond theoretical simulations: From experimental preparation, functionalized modification to practical applications

During the past decade, there is an explosive growth of theoretical and computational studies on 2D boron-based nanomaterials. In terms of extensive predictions from theoretical simulations, borophene, boron nanosheets and 2D boron derivatives show excellent structural, electronic, photonic and nonlinear optical characteristics, and potential applications in a wide range of fields. In recent years, previous studies have reported the successful experimental preparations, superior properties, multi-functionalized modifications of various 2D boron and its derivatives, which show many practical applications in significant fields. To further promote the ever-increasing experimental studies, this present review systematically summarizes recent progress on experimental preparation methods, functionalized modification strategies and practical applications of 2D boron-based nanomaterials and multifunctional derivatives. Firstly, this review summarizes the experimental preparation methods, including molecular beam epitaxy, chemical vapor deposition, liquid-phase exfoliation, chemical reaction, and other auxiliary methods. Then, various strategies for functionalized modification are introduced overall, focusing on borophene derivatives, boron-based nanosheets, atom-introduced, chemically-functionalized borophene and boron nanosheets, borophene or boron nanosheet-based heterostructures, and other functionalized 2D boron nanomaterials. Subsequently, various potential applications are discussed in detail, involving energy storage, catalysis conversion, photonics, optoelectronics, sensors, bio-imaging, biomedicine therapy, and adsorption. We comment the state-of-the-art related studies concisely, and also discuss the current status, probable challenges and perspectives rationally. This review is timely, comprehensive, in-depth and highly attractive for scientists from multiple disciplines and scientific fields, and can facilitate further development of advanced functional low-dimensional nanomaterials and multi-functionalized systems toward high-performance practical applications in significant fields.

Quantum-coupled borophene-based heterolayers for excitonic and molecular sensing applications

Borophene (B), with remarkably unique chemical binding in its crystallographic structural phases including anisotropic structures, theoretically has high Young's modulus and thermal conductivity. Moreover, it is metallic in nature, and has recently joined the family of two-dimensional (2D) materials and is poised to be employed in flexible hetero-layered devices and sensors in fast electronic gadgets and excitonic devices. Interfacial coupling helps individual atomic sheets synergistically work in tandem, and is very crucial in controllable functionality. Most of the microscopic and spectroscopic scans reveal surface information; however, information regarding interfacial coupling is difficult to obtain. Electronic signatures of dynamic inter-layer coupling in B/boron nitride (BN) and B/molybdenum disulfide (MoS₂) have been detected in the form of distinct peaks in differential current signals obtained from scanning tunneling spectroscopy (STS) and conducting atomic force microscopy (CAFM). These unique sets of observed peaks represent interfacial coupling quantum states. The peaks in the electronic density of states (DOS) obtained via density functional theory (DFT) band structure calculations matched well with the electronic signatures of coupling quantum states. In our calculations, we found that the DOS peak evolves when the component layers are brought to compromised distances. While B/BN exhibits green sensitivity indicating mid-gap formation, B/MoS₂ bestows red sensitivity indicating band-gap excitation of MoS₂. Molecular detection of methylene blue (MB) based on surface-enhanced Raman spectroscopy (SERS) was carried out with borophene-based hetero-layered stacks as molecular anchoring platforms.

Effects of adatom species on the structure, stability, and work function of adatom-α-borophene nanocomposites

Work function-tunable borophene-based electrode materials are of significant importance because they promote efficient carrier extraction/injection, thereby enabling electronic devices to achieve maximum energy conversion efficiency. Accordingly, determining the work function of adatom-borophene nanocomposites within a series wherein the adatom is systematically changed will facilitate the design of such materials. In this study, we theoretically determined that the M-B bond length, binding energy, electron transfer between adatoms and BBP, and work function (ϕ) are linearly dependent on the ionization potential (IP) and electronegativity for thermodynamically and kinetically stable adatom-α-borophene (M/BBP) systems involving a series of alkali (earth) metal/BBP (M = Li-Cs; Be-Ba) and halogen/BBP (M = F-I), respectively. However, the binding energies of Li/BBP and Be/BBP deviate from these dependencies owing to their super small adatoms and the resulting significantly enhanced effective M-B bonding areas. By interpreting the electron transfer picture among the different parts of M/BBP, we confirmed that metallic M/BBP possesses ionic sp-p and dsp-p M-B bonds in alkali (earth) metal/BBP but covalent-featured ionic p-p interactions in halogen/BBP. In particular, the direct proportionality between IP and ϕ for alkali (earth) metal/BBP originates from the synergistic effect of charge rearrangement and the increased induced dipole moment; however, the inverse proportionality between electronegativity and ϕ for halogen/BBP arises from the adsorption induced charge redistribution. Our results provide guidance for experimental efforts toward the realization of work function-tunable borophene-based electrodes as well as insight into the bonding rules between various adatoms and α-borophene.

Exploring the emerging applications of the advanced 2-dimensional material borophene with its unique properties

Borophene, a crystalline allotrope of monolayer boron, with a combination of triangular lattice and hexagonal holes, has stimulated wide interest in 2-dimensional materials and their applications. Although their properties are theoretically confirmed, they are yet to be explored and confirmed experimentally. In this review article, we present advancements in research on borophene, its synthesis, and unique properties, including its advantages for various applications with theoretical predictions. The uniqueness of borophene over graphene and other 2-dimensional (2D) materials is also highlighted along with their various structural stabilities. The strategy for its theoretical simulations, leading to the experimental synthesis, could also be helpful for the exploration of many newer 2D materials.

Borophene and Pristine Graphene 2D Sheets as Potential Surfaces for the Adsorption of Electron-Rich and Electron-Deficient π-Systems: A Comparative DFT Study

The versatility of striped borophene (sB), β12 borophene (β12), and pristine graphene (GN) to adsorb π-systems was comparatively assessed using benzene (BNZ) and hexafluorobenzene (HFB) as electron-rich and electron-deficient aromatic π-systems, respectively. Using the density functional theory (DFT) method, the adsorption process of the π-systems on the investigated 2D sheets in the parallel configuration was observed to have proceeded more favorably than those in the vertical configuration. According to the observations of the Bader charge transfer analysis, the π-system∙∙∙sB complexes were generally recorded with the largest contributions of charge transfer, followed by the π-system∙∙∙β12 and ∙∙∙GN complexes. The band structures of the pure sheets signaled the metallic and semiconductor characters of the sB/β12 and GN surfaces, respectively. In the parallel configuration, the adsorption of both BNZ and HFB showed more valence and conduction bands compared to the adsorption in the vertical configuration, revealing the prominent preferentiality of the anterior configuration. The density-of-states (DOSs) results also affirmed that the adsorption process of the BNZ and HFB on the surface of the investigated 2D sheets increased their electrical properties. In all instances, the sB and β12 surfaces demonstrated higher adsorptivity towards the BNZ and HFB than the GN analog. The findings of this work could make a significant contribution to the deep understanding of the adsorption behavior of aromatic π-systems toward 2D nanomaterials, leading, in turn, to their development of a wide range of applications.

Borophene as an emerging 2D flatland for biomedical applications: current challenges and future prospects

Recently, two-dimensional (2D)-borophene has emerged as a remarkable translational nanomaterial substituting its predecessors in the field of biomedical sensors, diagnostic tools, high-performance healthcare devices, super-capacitors, and energy storage devices. Borophene justifies its demand due to high-performance and controlled optical, electrical, mechanical, thermal, and magnetic properties as compared with other 2D-nanomaterials. However, continuous efforts are being made to translate theoretical and experimental knowledge into pragmatic platforms. To cover the associated knowledge gap, this review explores the computational and experimental chemistry needed to optimize borophene with desired properties. High electrical conductivity due to destabilization of the highest occupied molecular orbital (HOMO), nano-engineering at the monolayer level, chemistry-oriented biocompatibility, and photo-induced features project borophene for biosensing, bioimaging, cancer treatment, and theragnostic applications. Besides, the polymorphs of borophene have been useful to develop specific bonding for DNA sequencing and high-performance medical equipment. In this review, an overall critical and careful discussion of systematic advancements in borophene-based futuristic biomedical applications including artificial intelligence (AI), Internet-of-Things (IoT), and Internet-of-Medical Things (IoMT) assisted smart devices in healthcare to develop high-performance biomedical systems along with challenges and prospects is extensively addressed. Consequently, this review will serve as a key supportive platform as it explores borophene for next-generation biomedical applications. Finally, we have proposed the potential use of borophene in healthcare management strategies.

From a Möbius-aromatic interlocked Mn2B10H10 wheel to the metal-doped boranaphthalenes M2@B10H8 and M2B5 2D-sheets (M = Mn and Fe): a molecules to materials continuum using DFT studies

The design of (1) Möbius aromatic interlocked boron wheel Mn2B10H10, (2) Hückel aromatic boron analogs of naphthalene (M2@B10H8; M = Mn and Fe), and (3) metal boride monolayers (FeB5 and Fe2B5), creating a molecules to materials continuum.

Synthesis of bilayer borophene

As the nearest-neighbour element to carbon, boron is theoretically predicted to have a planar two-dimensional form, named borophene, with novel properties, such as Dirac fermions and superconductivity. Several polymorphs of monolayer borophene have been grown on metal surfaces, yet thicker bilayer and few-layer nanosheets remain elusive. Here we report the synthesis of large-size, single-crystalline bilayer borophene on the Cu(111) surface by molecular beam epitaxy. Combining scanning tunnelling microscopy and first-principles calculations, we show that bilayer borophene consists of two stacked monolayers that are held together by covalent interlayer boron-boron bonding, and each monolayer has β₁₂-like structures with zigzag rows. The formation of a bilayer is associated with a large transfer and redistribution of charge in the first boron layer on Cu(111), which provides additional electrons for the bonding of additional boron atoms, enabling the growth of the second layer. The bilayer borophene is shown to possess metallic character, and be less prone to being oxidized than its monolayer counterparts.