Polymeric Microparticles Generated via Confinement-Free Fluid Instability

Graphene Microflower by Photothermal Marangoni-Induced Fluid Instability for Omnidirectional Broadband Photothermal Conversion

2-D carbon-based materials are well-known for their broadband absorption properties for efficient solar energy conversion. However, their high reflectivity poses a challenge for achieving efficient omnidirectional light absorption. Inspired by the multilevel structures of the flower, a Graphene Microflower (GM) material with gradient refractive index surface was fabricated on polymer substrates using the UV-intense laser-induced phase explosion technique under the synergistic design of the photothermal Marangoni effect and the fluid instability principle. The refractive index gradient reduces light reflection and absorbs at least 96% of light at incident angles of 0-60° across the entire solar wavelength range (200-2500 nm). Over 90% absorption even at 75° angle of incidence. The light absorption is enhanced by the multiple interferometric phase cancelation and localized surface plasmon resonance, resulting in a steady-state temperature 60 °C higher than ambient conditions under one solar irradiation. The max rate of temperature rise can reach up to 62 °C s-1. The device is then integrated at the hot end of the temperature difference generator at high altitude to ensure continuous and efficient power generation, producing a steady-state power of 196 mW.

Surface-Templated Polymer Microparticle Synthesis Based on Droplet Microarrays

Polymer microparticle synthesis based on the surface-templated method is a simple and environmentally friendly method to produce various microparticles. Unique particles with different compositions can be fabricated by simply annealing a polymer on a liquid-repellent surface. However, there are hurdles to producing particles of homogeneous sizes with large quantities and varying the shape of particles. Here, a new approach to synthesizing multiple polymer microparticles using micropatterns with wettability contrast is presented. Polymer microparticles are formed in two steps. First, a layer of poly(sodium-4-styrenesulfonate) is deposited on the hydrophilic regions by dipping and withdrawing this micropattern from a polymer solution, and an array of microdroplets is formed. A dewetting-inducing layer on the pattern is introduced, and then target polymer patches are sequentially generated on it. By annealing over Tg, the contact line of the target polymer patch is freely receded, creating a particle form. The size and shape of the microparticle can be controlled by varying the micropatterns. In addition, it is demonstrated that microparticles made of polymer blends or polymer/nanoparticle composite are easily produced. This versatile method offers the potential of surface-templated synthesis to tailor polymer microparticles with different sizes, shapes, and functionalities in various research and applications.

Smart Lanceolate Surface with Fast Fog-Digesting Performance for Triboelectric Energy Harvesting

Utilizing the ubiquitous fog in nature to create decentralized energy-harvesting devices, free from geographical and hydrological constraints, presents an opportunity to foster sustainable power generation. Extracting electrical energy from fog relies heavily on fog-digesting performance. Improving the efficiency of fogwater utilization remains a formidable challenge for existing fogwater energy-harvesting technologies. Inspired by the water-harvesting behavior of Tillandsia leaves, a smart lanceolate surface is developed to harvest triboelectric energy by rapidly digesting fog. Such a surface exhibits capabilities in fog management, encompassing precise fog capture, transportation, and critical droplet separation. Specifically, fog droplets condense at hydrophilic sites of acylated cellulose ester, subsequently migrating toward the rear under Laplace pressure, thereby producing energy as they traverse through the tail end. Such architecture yields a brief voltage restoration period (with an average of 9.36 s), can rush the capacitor to 11.59 V within 20 s, and achieves a water-digestion rate of up to 71.05 kg/m2 h. This biomimetic approach enhances the water-digestion efficacy of the atmospheric water energy apparatus and offers perspectives on mitigating deficiencies in power resources.

Fabrication of polymeric microspheres for biomedical applications

Polymeric microspheres (PMs) have attracted great attention in the field of biomedicine in the last several decades due to their small particle size, special functionalities shown on the surface and high surface-to-volume ratio. However, how to fabricate PMs which can meet the clinical needs and transform laboratory achievements to industrial scale-up still remains a challenge. Therefore, advanced fabrication technologies are pursued. In this review, we summarize the technologies used to fabricate PMs, including emulsion-based methods, microfluidics, spray drying, coacervation, supercritical fluid and superhydrophobic surface-mediated method and their advantages and disadvantages. We also review the different structures, properties and functions of the PMs and their applications in the fields of drug delivery, cell encapsulation and expansion, scaffolds in tissue engineering, transcatheter arterial embolization and artificial cells. Moreover, we discuss existing challenges and future perspectives for advancing fabrication technologies and biomedical applications of PMs.

Superhydrophobic Surface-Assisted Preparation of Microspheres and Supraparticles and Their Applications

Superhydrophobic surface (SHS) has been well developed, as SHS renders the property of minimizing the water/solid contact interface. Water droplets deposited onto SHS with contact angles exceeding 150°, allow them to retain spherical shapes, and the low adhesion of SHS facilitates easy droplet collection when tilting the substrate. These characteristics make SHS suitable for a wide range of applications. One particularly promising application is the fabrication of microsphere and supraparticle materials. SHS offers a distinct advantage as a universal platform capable of providing customized services for a variety of microspheres and supraparticles. In this review, an overview of the strategies for fabricating microspheres and supraparticles with the aid of SHS, including cross-linking process, polymer melting, and droplet template evaporation methods, is first presented. Then, the applications of microspheres and supraparticles formed onto SHS are discussed in detail, for example, fabricating photonic devices with controllable structures and tunable structural colors, acting as catalysts with emerging or synergetic properties, being integrated into the biomedical field to construct the devices with different medicinal purposes, being utilized for inducing protein crystallization and detecting trace amounts of analytes. Finally, the perspective on future developments involved with this research field is given, along with some obstacles and opportunities.

Preparation of Janus Droplets and Hydrogels with Controllable Morphologies by an Aqueous Two-Phase System on the Superamphiphobic Surface

Janus particles, having the property integration of each component, have attracted increasing attention due to their considerable potential in the field of material engineering applications. However, organic solvents or sophisticated equipment during the fabrication processes is generally inevitable. Here, we report a facile route to prepare Janus droplets and hydrogels via aqueous two-phase systems (ATPS). Simply merging two polymers, i.e., polyethylene glycol (PEG) and dextran (DEX), as aqueous droplets on a superamphiphobic surface leads to phase separation, provided that their concentrations exceed the threshold in the mixed aqueous droplets, thus generating a Janus structure. Various morphologies of such Janus droplets can be well controlled by manipulating the locations of these two polymers' concentration on the phase diagram, and the evolution of the mixed droplets are deterministic on the basis of the kinetics of their phase separation and the degree of hydrophobicity of the substrate. Introducing monomers and/or nanoparticles, further, into a certain phase of the ATPS droplet followed by photopolymerizing enables Janus hydrogel particles with diverse functionalities to be obtained. The ease and green techniques with which the Janus balance and curvature between two phases of the Janus droplet can be finely tuned point to new directions in designing Janus particles and hold great promises in biological engineering.