Molybdenum Carbide Electrocatalyst In Situ Embedded in Porous Nitrogen-Rich Carbon Nanotubes Promotes Rapid Kinetics in Sodium-Metal-Sulfur Batteries

A Critical Review on Room-Temperature Sodium-Sulfur Batteries: From Research Advances to Practical Perspectives

Room-temperature sodium-sulfur (RT-Na/S) batteries are promising alternatives for next-generation energy storage systems with high energy density and high power density. However, some notorious issues are hampering the practical application of RT-Na/S batteries. Besides, the working mechanism of RT-Na/S batteries under practical conditions such as high sulfur loading, lean electrolyte, and low capacity ratio between the negative and positive electrode (N/P ratio), is of essential importance for practical applications, yet the significance of these parameters has long been disregarded. Herein, it is comprehensively reviewed recent advances on Na metal anode, S cathode, electrolyte, and separator engineering for RT-Na/S batteries. The discrepancies between laboratory research and practical conditions are elaborately discussed, endeavors toward practical applications are highlighted, and suggestions for the practical values of the crucial parameters are rationally proposed. Furthermore, an empirical equation to estimate the actual energy density of RT-Na/S pouch cells under practical conditions is rationally proposed for the first time, making it possible to evaluate the gravimetric energy density of the cells under practical conditions. This review aims to reemphasize the vital importance of the crucial parameters for RT-Na/S batteries to bridge the gaps between laboratory research and practical applications.

Defect engineering of a TiO2 anatase/rutile homojunction accelerating sulfur redox kinetics for high-performance Na-S batteries

Room-temperature sodium-sulfur (RT Na-S) batteries have the drawbacks of the poor shuttle effect of soluble sodium polysulfides (NaPSs) as well as slow sulfur redox kinetics, which result in poor cycling stability and low capacity, seriously affecting their extensive application. Herein, defect engineering is applied to construct rich oxygen vacancies at the interface of a TiO2 anatase/rutile homojunction (OV-TRA) to enhance sulfur affinity and redox reaction kinetics. Combining structural characterizations with electrochemical analysis reveals that OV-TRA well alleviates the shuttle effect of NaPSs and precipitates the deposition and diffusion kinetics of Na2S. Consequently, S/OV-TRA provides excellent electrochemical performance with a reversible capacity of 870 mA h g-1 at 0.1 C after 100 cycles and a long-term cycling capability of 759 mA h g-1 at 1 C after 1000 cycles. This work provides an effective interfacial defect engineering strategy to promote the application of metal oxides in RT Na-S batteries.

Understanding the charge transfer effects of single atoms for boosting the performance of Na-S batteries

The effective flow of electrons through bulk electrodes is crucial for achieving high-performance batteries, although the poor conductivity of homocyclic sulfur molecules results in high barriers against the passage of electrons through electrode structures. This phenomenon causes incomplete reactions and the formation of metastable products. To enhance the performance of the electrode, it is important to place substitutable electrification units to accelerate the cleavage of sulfur molecules and increase the selectivity of stable products during charging and discharging. Herein, we develop a single-atom-charging strategy to address the electron transport issues in bulk sulfur electrodes. The establishment of the synergistic interaction between the adsorption model and electronic transfer helps us achieve a high level of selectivity towards the desirable short-chain sodium polysulfides during the practical battery test. These finding indicates that the atomic manganese sites have an enhanced ability to capture and donate electrons. Additionally, the charge transfer process facilitates the rearrangement of sodium ions, thereby accelerating the kinetics of the sodium ions through the electrostatic force. These combined effects improve pathway selectivity and conversion to stable products during the redox process, leading to superior electrochemical performance for room temperature sodium-sulfur batteries.

Conformal 3D Li/Li13Sn5 Scaffolds Anodes for High-Areal Energy Density Flexible Lithium Metal Batteries

Achieving a high depth of discharge (DOD) in lithium metal anodes (LMAs) is crucial for developing high areal energy density batteries suitable for wearable electronics. Yet, the persistent growth of dendrites compromises battery performance, and the significant lithium consumption during pre-lithiation obstructs their broad application. Herein, A flexible 3D Li13Sn5 scaffold is designed by allowing molten lithium to infiltrate carbon cloth adorned with SnO2 nanocrystals. This design markedly curbs the troublesome dendrite growth, thanks to the uniform electric field distribution and swift Li+ diffusion dynamics. Additionally, with a minimal SnO2 nanocrystals loading (2 wt.%), only 0.6 wt.% of lithium is consumed during pre-lithiation. Insights from in situ optical microscope observations and COMSOL simulations reveal that lithium remains securely anchored within the scaffold, a result of the rapid mass/charge transfer and uniform electric field distribution. Consequently, this electrode achieves a remarkable DOD of 87.1% at 10 mA cm-2 for 40 mAh cm-2. Notably, when coupled with a polysulfide cathode, the constructed flexible Li/Li13Sn5@CC||Li2S6/SnO2@CC pouch cell delivers a high-areal capacity of 5.04 mAh cm-2 and an impressive areal-energy density of 10.6 mWh cm-2. The findings pave the way toward the development of high-performance LMAs, ideal for long-lasting wearable electronics.

Interfacial Synergy in Mo2C/MoC Heterostructure Promoting Sequential Polysulfide Conversion in High-Performance Lithium-Sulfur Battery

A rational design of sulfur host is the key to conquering the"polysulfide shuttle effects" by accelerating the polysulfide conversion. Since the process involves solid-liquid-solid multistep phase transitions, purposely-engineered heterostructure catalysts with various active regions for catalyzing conversion steps correspondingly are beneficial to promote the overall conversion process. However, the functionalities of the materials surface and interface in heterostructure catalysts remain unclear. In this work, an Mo2C/MoC catalyst with abundant Mo2C surface-interface-MoC surface tri-active-region is developed by in situ converting the MoZn-metal organic framework. The experimental and simulation studies demonstrate the interface can catch long-chain polysulfides and promote their conversion. Instead, the Mo2C and MoC tend to accommodate the short-chain polysulfide and accelerate their conversion and the Li2S dissociation. Benefitting from the high catalytic ability, the Li-S battery assembled with the Mo2C/MoC-S cathode shows more discrete redox reactions and delivers a high initial capacity of 1603.6 mAh g-1 at 1 C charging-discharging rate, which is over twofolds of the one assembled using individual hosts, and 80.4% capacity can be maintained after 1000 cycles at 3 C rate. This work has demonstrated a novel synergy between the interface and material surface, which will help the future design of high-performance Li-S batteries.

Optimizing potassium polysulfides for high performance potassium-sulfur batteries

Potassium-sulfur batteries attract tremendous attention as high-energy and low-cost energy storage system, but achieving high utilization and long-term cycling of sulfur remains challenging. Here we show a strategy of optimizing potassium polysulfides for building high-performance potassium-sulfur batteries. We design the composite of tungsten single atom and tungsten carbide possessing potassium polysulfide migration/conversion bi-functionality by theoretical screening. We create two ligand environments for tungsten in the metal-organic framework, which respectively transmute into tungsten single atom and tungsten carbide nanocrystals during pyrolysis. Tungsten carbide provide catalytic sites for potassium polysulfides conversion, while tungsten single atoms facilitate sulfides migration thereby significantly alleviating the insulating sulfides accumulation and the associated catalytic poisoning. Resultantly, highly efficient potassium-sulfur electrochemistry is achieved under high-rate and long-cycling conditions. The batteries deliver 89.8% sulfur utilization (1504 mAh g-1), superior rate capability (1059 mAh g-1 at 1675 mA g-1) and long lifespan of 200 cycles at 25 °C. These advances enlighten direction for future KSBs development.

Heterostructured Co/CeO2-Decorating N-Doped Porous Carbon Nanocubes as Efficient Sulfur Hosts with Enhanced Rate Capability and Cycling Durability toward Room-Temperature Na-S Batteries

Room-temperature sodium-sulfur (RT Na-S) batteries have gained significant interest thanks to their satisfactory energy density and abundant earth resources. Nevertheless, practical implementations of RT Na-S batteries are still impeded by serious shuttle effects of sodium polysulfide (NaPS) intermediates, sluggish redox kinetics of cathodes, and poor electronic conductivity from S-species. To solve these problems, heterostructured Co/CeO2-decorating N-doped porous carbon nanocubes (Co/CeO2-NPC) are constructed as a S support, which integrates the strong adsorption and fast conversion of NaPSs, together with superior electronic conductivity. Consequently, the as-synthesized S@Co/CeO2-NPC cathode for RT Na-S batteries exhibits improved rate performance (1275, 561.1, and 485 mAh g-1 at 0.1, 5, and 10 C, respectively) and superior cyclic durability (capacity degeneration of 0.027% per cycle after 1000 cycles at 5 C). Such a S cathode combining a heterostructure interface, hierarchical porous carbon nanocubes, and polar compositions can considerably increase electronic conductivity and promote NaPS adsorption and conversion, achieving superior performance toward RT Na-S batteries.

Encapsulation of sulfur in MoS2-modified metal-organic framework-derived N, O-codoped carbon host for sodium-sulfur batteries

Room-temperature sodium-sulfur batteries (RT Na-S) are promising energy storage systems with high energy densities and low costs. Nevertheless, drawbacks, including the limited cycle life and sluggish redox kinetics of sodium polysulfides, hinder their implementation. Herein, a heterostructure of MoS2 nanosheets coated on a metal-organic framework (MOF)-derived N, O-codoped flower-like carbon matrix (NOC) was designed as a sulfur host for advanced RT Na-S batteries. The NOC@MoS2 hierarchical host provided a sufficient space to guarantee a high sulfur loading and confinement for the volume expansion of sulfur during the charge/discharge process. According to first-principle calculations, the NOC@MoS2 composite exhibited metallic conductivity because electronic states crossed the Fermi level, which indicates that the introduction of NOC significantly improved the electronic conductivity of MoS2. Furthermore, electron transfer from MoS2 to the O-doped carbon sites was observed owing to the strong electronegativity of O, which can effectively increase the Lewis acidity of MoS2 and weaken the sodium-sulfur bonds in sodium polysulfides after adsorption on the cathode, leading to reductions in the Na2S dissociation energy barrier and Gibbs free energy for the rate-limiting step of the sulfur reduction process. Therefore, with the synthetic effects of MoS2 and N, O-codoped carbon, the obtained cathode exhibited a superior electrochemical performance.

Self-Powered Hydrogen Production with Improved Energy Efficiency via Polysulfides Redox

In the pursuit of efficient solar-driven electrocatalytic water splitting for hydrogen production, the intrinsic challenges posed by the sluggish kinetics of anodic oxygen evolution and intermittent sunlight have prompted the need for innovative energy systems. Here, we introduce an approach by coupling the polysulfides oxidation reaction with the hydrogen evolution reaction for energy-saving H2 production, which could be powered by an aqueous zinc-polysulfides battery to construct a self-powered energy system. This unusual hybrid water electrolyzer achieves 300 mA cm-2 at a low cell voltage of 1.14 V, saving electricity consumption by 100.4% from 5.47 to 2.73 kWh per m3 H2 compared to traditional overall water splitting. Benefiting from the favorable reaction kinetics of polysulfides oxidation/reduction, the aqueous zinc-polysulfides battery exhibits an energy efficiency of approximately 89% at 1.0 mA cm-2. Specially, the zinc-polysulfide battery effectively stores intermittent solar energy as chemical energy during light reaction by solar cells. Under an unassisted light reaction, the batteries could release energy to drive H2 production through a hybrid water electrolyzer for uninterrupted hydrogen production. Therefore, the aim of simultaneously generating H2 and eliminating the restrictions of intermittent sunlight is realized by combining the merits of polysulfides redox, an aqueous metal-polysulfide battery, and solar cells. We believe that this concept and utilization of polysulfides redox will inspire further fascinating attempts for the development of sustainable energy via electrocatalytic reactions.

Steering the liquid-solid redox conversion of lithium-selenium batteries through ultrafine MoC catalyst

Selenium cathodes have attracted much attention because of the high electronic conductivity and energy density. However, the shuttle effect of lithium polyselenides (LiPSes) leads to rapid capacity fading, hindering the practical application of lithium-selenium (Li-Se) batteries. Herein, an ultrafine MoC catalyst has been synthesized and utilized to accelerate the conversion from liquid LiPSes to solid Li2Se2/Li2Se, leading to suppressed shuttle effect and thus improved battery performance. Our present study provides valuable inspiration to the future exploration for the rational design of high-efficient catalysts for practical Li-Se batteries.

MoO2 Nanoclusters Embedded in Hierarchical Nitrogen Doped Carbon Nanoflower as Electrocatalytic Mediators in Aqueous Zinc-Tellurium Batteries: Enhancing Electrochemical Kinetics of Tellurium Redox Reaction

Aqueous zinc-ion batteries (AZIBs) are considered to be one of the most promising devices for large-scale energy storage systems owing to their high theoretical capacity, environmental friendliness, and safety. However, the ionic intercalation or surface redox mechanisms in conventional cathode materials generally result in unsatisfactory capacities. Conversion-type aqueous zinc-tellurium (Zn-Te) batteries have recently gained widespread attention owing to their high theoretical specific capacities. However, it remains an enormous challenge to improve the slow kinetics of the aqueous Zn-Te batteries. Here, MoO2 nanoclusters embedded in hierarchical nitrogen-doped carbon nanoflower (MoO2 /NC) hosts are successfully synthesized and loaded with Te in aqueous Zn-Te batteries. Benefitting from the highly dispersed MoO2 nanoclusters and hierarchical nanoflower structure with a large specific surface area, the electrochemical kinetics of the Te redox reaction are significantly improved. As a result, the Te-MoO2 /NC electrode exhibits superior cycling stability and a high specific capacity of 493 mAh g-1 at 0.1 A g-1 . Meanwhile, the conversion mechanism is systematically explored using a variety of ex situ characterization methods. Therefore, this study provides a novel approach for enhancing the kinetics of the Te redox reaction in aqueous Zn-Te batteries.

Double design of host and guest synergistically reinforces the Na-ion storage of sulfur cathodes

Development of room-temperature sodium-sulfur batteries is significantly hampered by the shuttle effect of soluble intermediates and intrinsically sluggish conversion kinetics. In this work, a double design host and guest strategy (i.e., implantation of a polar V₂O₃ adsorbent into a carbon substrate and selenium doping of a sulfur guest) is proposed to synergistically reinforce the electrochemical properties of sulfur electrodes in sodium ion storage. The V₂O₃ adsorbent efficiently immobilizes sulfur species via strong polar-polar interactions, while the selenium dopant improves the electronic conductivity of sulfur cathodes and accelerates the redox conversion of sulfur cathodes. The synergistic effect between the V₂O₃ adsorbent and selenium dopant is shown to inhibit the shuttle effect and improve the redox kinetics, thus realizing greatly enhanced Na-ion storage properties of sulfur cathodes. The as-designed sulfur cathode delivers a superior rate capability of 663 mA h g^-1 at 2.0 A g^-1 and demonstrates excellent cyclability of 405 mA h g^-1 over 700 cycles at 1.0 A g^-1.

Orthorhombic Nb2 O5 Decorated Carbon Nanoreactors Enable Bidirectionally Regulated Redox Behaviors in Room-Temperature Na-S Batteries

Regulating redox kinetics is able to spur the great-leap-forward development of room-temperature sodium-sulfur (RT Na-S) batteries, especially on propelling their Na-ion storage capability. Here, an innovative metal oxide kinetics accelerator, orthorhombic Nb₂ O₅ Na-ion conductor, is proposed to functionalize porous carbon nanoreactors (CNR) for S cathodes. The Nb₂ O₅ is shown to chemically immobilize sodium polysulfides via strong affinity. Theoretical and experimental evidence reveals that the Nb₂ O₅ can bidirectionally regulate redox behaviors of S cathodes, which accelerates reduction conversions from polysulfides to sulfides as well as promotes oxidation reactions from sulfides to S. In situ and ex situ characterization techniques further verify its electrochemical lasting endurance in catalyzing S conversions. The well-designed S cathode demonstrates a high specific capacity of 1377 mA h g^-1 at 0.1 A g^-1 , outstanding rate capability of 405 mA h g^-1 at 2 A g^-1 , and stable cyclability with a capacity retention of 617 mA h g^-1 over 600 cycles at 0.5 A g^-1 . An ultralow capacity decay rate of 0.0193% per cycle is successfully realized, superior to those of current state-of-the-art RT Na-S batteries. This design also suits emerging Na-Se batteries, which contribute to outstanding electrochemical performance as well.

Porosity Engineering towards Nitrogen-Rich Carbon Host Enables Ultrahigh Capacity Sulfur Cathode for Room Temperature Potassium-Sulfur Batteries

Potassium-sulfur batteries (KSBs) are regarded as a promising large-scale energy storage technology, owing to the high theoretical specific capacity and intrinsically low cost. However, the commercialization of KSBs is hampered by the low sulfur utilization and notorious shuttle effect. Herein, we employ a porosity engineering strategy to design nitrogen-rich carbon foam as an efficient sulfur host. The tremendous micropores magnify the chemical interaction between sulfur species and the polar nitrogen functionalities decorated carbon surface, which significantly improve the sulfur utilization and conversion. Meanwhile, the abundant mesopores provide ample spaces, accommodating the large volume changes of sulfur upon reversible potassation. Resultantly, the constructed sulfur cathode delivers an ultrahigh initial reversible capacity of 1470 mAh g^-1 (87.76% of theoretical capacity) and a superior rate capacity of 560 mAh g^-1 at 2 C. Reaching the K₂S phase in potassiation is the essential reason for obtaining the ultrahigh capacity. Nonetheless, systematic kinetics analyses demonstrate that the K₂S involved depotassiation deteriorates the charge kinetics. The density functional theory (DFT) calculation revealed that the nitrogen-rich micropore surface facilitated the sulfur reduction for K₂S but created a higher energy barrier for the K₂S decomposition, which explained the discrepancy in kinetics modification effect produced by the porosity engineering.

Single-Atom Yttrium Engineering Janus Electrode for Rechargeable Na-S Batteries

The development of rechargeable Na-S batteries is very promising, thanks to their considerably high energy density, abundance of elements, and low costs and yet faces the issues of sluggish redox kinetics of S species and the polysulfide shuttle effect as well as Na dendrite growth. Following the theory-guided prediction, the rare-earth metal yttrium (Y)-N₄ unit has been screened as a favorable Janus site for the chemical affinity of polysulfides and their electrocatalytic conversion, as well as reversible uniform Na deposition. To this end, we adopt a metal-organic framework (MOF) to prepare a single-atom hybrid with Y single atoms being incorporated into the nitrogen-doped rhombododecahedron carbon host (Y SAs/NC), which features favorable Janus properties of sodiophilicity and sulfiphilicity and thus presents highly desired electrochemical performance when used as a host of the sodium anode and the sulfur cathode of a Na-S full cell. Impressively, the Na-S full cell is capable of delivering a high capacity of 822 mAh g^-1 and shows superdurable cyclability (97.5% capacity retention over 1000 cycles at a high current density of 5 A g^-1). The proof-of-concept three-dimensional (3D) printed batteries and the Na-S pouch cell validate the potential practical applications of such Na-S batteries, shedding light on the development of promising Na-S full cells for future application in energy storage or power batteries.

In situ implanting MnO nanoparticles into carbon nanorod-assembled microspheres enables performance-enhanced room-temperature Na–S batteries

In situ implanting MnO fine nanoparticles into carbon nanorod-assembled microspheres enables improved electrode stability and electrochemical performance via structural and compositional synergy.