Perovskite-Type SrVO3 as High-Performance Anode Materials for Lithium-Ion Batteries

First-principles calculation of structural, electronic, optical, and mechanical properties of SrVO3

CONTEXT AND RESULTS : In this paper, the crystal structure, electronic, optical, and mechanical properties of SrVO3 have been systematically studied by first-principles calculation. The results show that the calculated lattice parameters are in good agreement with the experimental values of X-ray diffraction. The density of states is described in detail in this paper. By analyzing the crystal structure and electronic properties of SrVO3, the magnetic properties of SrVO3 are obtained from the one unpaired electrons of V and the exchange interaction between two V ions. At the same time, a detailed analysis of the optical properties of SrVO3 was conducted, and it was found that it is transparent in the visible light range. Finally, the mechanical properties of SrVO3 are calculated, which can provide some references for future research. COMPUTATIONAL METHOD: In this paper, a first-principles method based on density functional theory (DFT) is reported for PBE-GGA analysis using the plane wave-pseudo potential method in a quantum concentrate packet, U value of 7 eV to V-d and a U value of 2 eV to O-p, Grimme correction by DFT-D method. The k points in the Brillouin region are set to 4 × 4 × 4. The energy convergence criterion for self-consistent field calculation is set at 5.0 × 10-6 eV/atom, and the cutoff energy is 1170 eV. In this paper, the force acting on each atom is not more than 0.01 eV/Å, the maximum stress is not more than 0.02GPa, and the maximum atomic displacement is 5 × 10-4 Å.

Ternary Lithium Nickel Boride with 1D Rapid-Ion-Diffusion Channels as an Anode for Use in Lithium-Ion Batteries

Anode materials with high-rate performances and good electrochemical stabilities are urgently required for the grid-scale application of lithium-ion batteries (LIBs). Theoretically, transition metal borides are desirable candidates because of their appropriate working potentials and good conductivities. However, the reported metal borides exhibit poor performances owing to their lack of favorable Li+ storage sites and poor structural stabilities during long-term charging/discharging. In this work, a ternary alkali metal boride, Li1.2Ni2.5B2, which displays a high Li+ storage capacity and remarkable electrochemical stability and an excellent rate performance is studied. In contrast to conventional transition metal borides, the introduction of Li atoms facilitates the formation of 1D Ni/B-based honeycomb channels during synthesis. This Ni/B framework successfully sustains the strain during Li+ intercalation and deintercalation, and thus, the optimized Li1.2Ni2.5B2 anode exhibits an excellent cycle stability over 500 charge/discharge cycles. This electrode also exhibits superior reversible capacities of 350, 183, and 80 mA h g-1 at 0.1, 1, and 5 A g-1, respectively, indicating the considerable potential of the 1D Ni/B framework as a commercially available fast-charging LIB anode.

Zero-Strain Sodium Lanthanum Titanate Perovskite Embedded in Flexible Carbon Fibers as a Long-Span Anode for Lithium-Ion Batteries

"High-capacity" graphite and "zero-strain" spinel Li4Ti5O12 (LTO) occupy the majority market of anode materials for Li+ storage in commercial applications. Nevertheless, their intrinsic drawbacks including the unsafe potential of graphite and unsatisfactory capacity of LTO limit the further development of lithium-ion batteries (LIBs), which is unable to satisfy the ever-increasing demands. Here, a novel Na0.35La0.55TiO3 perovskite embedded in multichannel carbon fibers (NLTO-NF) is rationally designed and synthesized through an electrospinning method. It not only has the advantages of a respectable specific capacity of 265 mAh g-1 at 0.1 A g-1 and superb rate capability, but it also possesses the zero-strain characteristic. Impressively, an ultralong cycling life with 96.3% capacity retention after 9000 cycles at 2 A g-1 is achieved in the half cell, and 90.3% of capacity retention ratio is obtained after even 2500 cycles at 1 A g-1 in the coupled LiFePO4/NLTO-NF full cell. This study introduces a new member with excellent performance to the zero-strain materials family for next-generation LIBs.

Crystal Engineering of Silica Anode Achieving Intrinsic Zero-Strain

Si-based anodes have large intrinsic volume expansion, which hinders their practicality and commercialization. To address this challenge, the design principle of intrinsic zero-strain anodes (① large intracrystalline cavities and ② strong bonds) is proposed, and silica with large intracrystalline cavities (SLIC) established by strong Si─O bonds ([SiO4 ] coordinate structures) is obtained and acts as an anode, achieving the intrinsic zero-strain feature first in silicon-based anodes. The phase structure of SLIC is maintained and the [SiO4 ] coordinate structure merely shows slight disorder during cycling. The feature stems from lithiation taking place by the solid-solution insertion reaction rather than the conventional conversion/alloying addition reactions, because the solid-solution insertion reaction for the SLIC has the lowest change in the Gibbs free energy. The SLIC anode demonstrates excellent cycling stability and high initial Coulombic efficiency (≈85%). Moreover, owing to the low working voltage (≈0.28 V) and relatively high specific capacity, the SLIC anode presents the highest gravimetric energy density among reported zero-/quasi-zero-strain anodes and high volumetric energy density (around twice as much as graphite). The universality of the designing principle is also validated. This work provides design guidelines for zero-strain anodes in next-generation batteries.

Stable Supercapacity of Binder-Free TiO2(B) Epitaxial Electrodes for All-Solid-State Nanobatteries

Owing to its pseudocapacitive, unidimensional, rapid ion channels, TiO2(B) is a promising material for application to battery electrodes. In this study, we align these channels by epitaxially growing TiO2(B) films with the assistance of an isostructural VO2(B) template layer. In a liquid electrolyte, binder-free TiO2(B) epitaxial electrodes exhibit a supercapacity near the theoretical value of 335 mA h g-1 and an excellent charge-discharge reproducibility for ≥200 cycles, which outperform those of other TiO2(B) nanostructures. For the all-solid-state configuration employing the LiPON solid electrolyte, excellent stability persists. Our findings suggest excellent potential for miniaturizing all-solid-state nanobatteries in self-powered integrated circuits.

In Situ Exsolution of Ba3(VO4)2 Nanoparticles on a V-Doped BaCoO3-δ Perovskite Oxide with Enhanced Activity for Electrocatalytic Hydrogen Evolution

The successful preparation of a perovskite-based heterostructure is important for broadening the applications of perovskites in the field of electrocatalysis, especially in a hydrogen evolution reaction (HER). Nevertheless, the limited active sites of perovskites severely hindered the HER properties. Herein, an in situ exsolution method was used to construct a nanocomposite based on V-doped BaCoO_3-δ decorated with Ba₃(VO₄)₂ (BVCO19) for alkaline HER. The exsolved Ba₃(VO₄)₂ can induce more Co⁴⁺ ions on BaCoO_3-δ, which serves as active sites for the release of H₂. Meanwhile, by regulating the valency of V and Co species, the catalyst can reach a charge balance by generating more oxygen vacancies, which greatly facilitates the adsorption and dissociation of H₂O molecules. The synergistic effect between the oxygen vacancies and high-valence Co⁴⁺ leads to an enhanced HER performance of BVCO19. The as-obtained catalyst delivers a low overpotential of 194 mV at 10 mA cm^-2 as well as impressive stability for 100 h in alkaline media, which outperforms pristine BaCoO_3-δ and most of the nonprecious-based perovskite oxides. This work provides new insights into the preparation of perovskite-based heterostructure for boosting HER.

2D TaSe2 as a zero-strain and high-performance anode material for Li+ storage

The zero-strain property of anode materials plays a determining role in their safety and cycling performance. However, the zero-strain anode materials currently developed are very limited and show significant performance trade-offs. Herein, novel highly conductive two-dimensional (2D) TaSe₂ is first explored as an anode material. Due to the reaction mechanism of Li⁺ solid-solution, the 2D TaSe₂ anode shows the zero-strain feature (0.042%) at full lithiation, resulting in excellent cycling stability. Owing to the dual active sites (Ta and Se atoms) and the double-sided Li⁺ storage mechanism, the 2D TaSe₂ anode exhibits the highest specific capacity of zero-strain anode materials, and it is the only zero-strain anode material that exceeds the graphite anode in energy density. Additionally, because of its remarkable Li⁺/electronic conductivity and high mass density, the anode is insensitive to the loading mass (3.78-12.66 mg cm^-2), resulting in high areal (9.94 mA h cm^-2), volumetric (∼5 times greater than the graphite anode), and gravimetric specific capacities (the only zero-strain anode higher than the graphite anode). When matched with the high-loading LiFePO₄ cathode (11.4 mg cm^-2), the full cell also presents overall good performance. Experiment results combined with density functional theory (DFT) calculations are adopted together to reveal the mechanisms of Li⁺ storage and transfer. This work provides a good paradigm to design zero-strain and high-performance alkali-metal-ion anode materials.

Operando Exploring and Modulating Phase Evolution Chemistry from MAX to MXenes in Molten Salt Synthesis

Lewis acidic molten salt method is a promising synthesis strategy for achieving MXenes with controllable surface termination from numerous MAX materials. Understanding the phase evolution chemistry during etching and post-processing is highly desirable but remains a key challenge due to the lack of suitable in-situ characterizations and the complexity of the reaction process. Herein, we introduce an operando synchrotron radiation X-ray diffraction (SRXRD) technique to unveil the phase evolution process of Nb₂GaC MAX under a molten-salt ambient, proposing a controllable synthesis to achieve optimal etching through precise temperature and time adjustment. Subsequently, the phase structure of Nb₂CT_x MXenes is successfully tailored from hexagonal to amorphous by time-dependent persulfate oxidation. The resulting amorphous Nb₂CT_x with a well-patterned morphology and numerous chloride terminations exhibits highly improved specific capacity, rate capability, and long cycling for Li⁺ storage with a Cl-containing surface protective film. Addressing the time-related phase evolution during the entire molten salt strategy provides new insights into achieving higher efficiency and controllability in preparing MXenes and shows great potential in high-performance energy storage systems based on MXenes.

Double Perovskite La2 MnNiO6 as a High-Performance Anode for Lithium-Ion Batteries

Traditional lithium-ion batteries cannot meet the ever-increasing energy demands due to the unsatisfied graphite anode with sluggish electrochemical kinetics. Recently, the perovskite material family as anode attracts growing attention due to their advantages on specific capacity, rate capability, lifetime, and safety. Herein, a double perovskite La₂ MnNiO₆ synthesized by solid-state reaction method as a high-performance anode material for LIBs is reported. La₂ MnNiO₆ with an average operating potential of <0.8 V versus Li⁺ /Li exhibits a good rate capability. Besides, the Li|La₂ MnNiO₆ cells perform long cycle life without decay after 1000 cycles at 1C and a high cycling retention of 93% is observed after 3000 cycles at 6C. It reveals that this material maintains stable perovskite structure with cycling. Theoretical calculations further demonstrate the high electronic conductivity, low diffusion energy barrier, and structural stability of the lithiated La₂ MnNiO₆ . This study highlights the double perovskite type material as a promising anode for next-generation batteries.

High-Entropy Perovskites for Energy Conversion and Storage: Design, Synthesis, and Potential Applications

Perovskites have shown tremendous promise as functional materials for several energy conversion and storage technologies, including rechargeable batteries, (electro)catalysts, fuel cells, and solar cells. Due to their excellent operational stability and performance, high-entropy perovskites (HEPs) have emerged as a new type of perovskite framework. Herein, this work reviews the recent progress in the development of HEPs, including synthesis methods and applications. Effective strategies for the design of HEPs through atomistic computations are also surveyed. Finally, an outlook of this field provides guidance for the development of new and improved HEPs.