Diradical-Featured Organic Small-Molecule Photothermal Material with High-Spin State in Dimers for Ultra-Broadband Solar Energy Harvesting

A Processible and Ultrahigh-temperature Organic Photothermal Material through Spontaneous and Quantitative [2+2] Cycloaddition-Cycloreversion

Energy conversion, particularly light to heat conversion, has garnered significant attention owing to its prospect in renewable energy exploitation and utilization. Most previous efforts have focused on developing organic photothermal materials for low-temperature applications, whereas the importance of simplifying the preparation methods of photothermal materials and enhancing their maximum photothermal temperature have been less taken. Herein, we prepare an organic near-infrared (NIR) photothermal material namely ATT by a spontaneous [2+2] cycloaddition-cycloreversion reaction. In addition to the solution-based method, ATT could also be readily preapred by ball milling in a high yield of 90 % in just 15 min. ATT powder exhibits a broad absorption extending beyond 2000 nm, excellent processability, and thermal stability. Remarkably, ATT powder can reach an unprecedently temperature as high as 450 °C while maintaining excellent photostability upon photoirradiation. Leveraging its extraordinary photothermal and processable properties, ATT was used in the high-temperature applications, such as photo-ignition, photo-controlled metal processing and high-temperature shape memory, all of which offer spatiotemporal control capabilities. This work provides a new approach to prepare organic photothermal materials with high temperatures, and pave the way for their applications in extreme environments.

Manipulation of the Self-Assembly Morphology by Side-Chain Engineering of Quinoxaline-Substituted Organic Photothermal Molecules for Highly Efficient Solar-Thermal Conversion and Applications

Organic photothermal materials have attracted increasing attention because of their structural diversity, flexibility, and compatibility. However, their energy conversion efficiency is limited owing to the narrow absorption spectrum, strong reflection/transmittance, and insufficient nonradiative decay. In this study, two quinoxaline-based D-A-D-A-D-type molecules with ethyl (BQE) or carboxylate (BQC) substituents were synthesized. Strong intramolecular charge transfer provided both molecules with a broad absorption range of 350-1000 nm. In addition, the high reorganization energy and weak molecular packing of BQE resulted in efficient nonradiative decay. More importantly, the self-assembly of BQE leads to a textured surface and enhances the light-trapping efficiency with significantly reduced light reflection/transmittance. Consequently, BQE achieved an impressive solar-thermal conversion efficiency of 18.16 % under 1.0 kW m-2 irradiation with good photobleaching resistance. Based on this knowledge, the water evaporation rate of 1.2 kg m-2 h-1 was attained for the BQE-based interfacial evaporation device with an efficiency of 83 % under 1.0 kW m-2 simulated sunlight. Finally, the synergetic integration of solar-steam and thermoelectric co-generation devices based on BQE was realized without significantly sacrificing solar-steam efficiency. This underscores the practical applications of BQE-based technology in effectively harnessing photothermal energy. This study provides new insights into the molecular design for enhancing light-trapping management by molecular self-assembly, paving the way for photothermal-driven applications of organic photothermal materials.

Manipulation of Nonradiative Process Based on the Aggregation Microenvironment to Customize Excited-State Energy Conversion

ConspectusNonradiative processes with the determined role in excited-state energy conversion, such as internal conversion (IC), vibrational relaxation (VR), intersystem crossing (ISC), and energy or electron transfer (ET or eT), have exerted a crucial effect on biological functions in nature. Inspired by these, nonradiative process manipulation has been extensively utilized to develop organic functional materials in the fields of energy and biomedicine. Therefore, comprehensive knowledge and effective manipulation of sophisticated nonradiative processes for achieving high-efficiency excited-state energy conversion are quintessential. So far, many strategies focused on molecular engineering have demonstrated tremendous potential in manipulating nonradiative processes to tailor excited-state energy conversion. Besides, molecular aggregation considerably affects nonradiative processes due to their ultrasensitivity, thus providing us with another essential approach to manipulating nonradiative processes, such as the famous aggregation-induced emission. However, the weak interactions established upon aggregation, namely, the aggregation microenvironment (AME), possess hierarchical, dynamic, and systemic characteristics and are extremely complicated to elucidate. Revealing the relationship between the AME and nonradiative process and employing it to customize excited-state energy conversion would greatly promote advanced materials in energy utilization, biomedicine, etc., but remain a huge challenge. Our group has devoted much effort to achieving this goal.In this Account, we focus on our recent developments in nonradiative process manipulation based on AME. First, we provide insight into the effect of the AME on nonradiative process in terms of its steric effect and electronic regulation, illustrating the possibility of nonradiative process manipulation through AME modulation. Second, the distinct enhanced steric effect is established by crystallization and heterogeneous polymerization to conduct crystallization-induced reversal from dark to bright excited states and dynamic hardening-triggered nonradiative process suppression for highly efficient luminescence. Meanwhile, promoting the ISC process and stabilizing the triplet state are also manipulated by the crystal and polymer matrix to induce room-temperature phosphorescence. Furthermore, the strategies employed to exploit nonradiative processes for photothermy and photosensitization are reviewed. For photothermal conversion, besides the weakened steric effect with promoted molecular motions, a new strategy involving the introduction of diradicals upon aggregation to narrow the energy band gap and enhance intermolecular interactions is put forward to facilitate IC and VR for high-efficiency photothermal conversion. For photosensitization, both the enhanced steric effect from the rigid matrix and the effective electronic regulation from the electron-rich microenvironment are demonstrated to facilitate ISC, ET, and eT for superior photosensitization. Finally, we explore the existing challenges and future directions of nonradiative process manipulation by AME modulation for customized excited-state energy conversion. We hope that this Account will be of wide interest to readers from different disciplines.

Metal-Free Catalytic Formation of a Donor-Acceptor-Donor Molecule and Its Lewis Acid-Adduct Singlet Diradical with High-Efficient NIR-II Photothermal Conversion

We have synthesized a quinone-incorporated bistriarylamine donor-acceptor-donor (D-A-D) semiconductor 1 by B(C6F5)3 (BCF) catalyzed C-H/C-H cross coupling via radical ion pair intermediates. Coordination of Lewis acids BCF and Al(ORF)3 (RF=C(CF3)3) to the semiconductor 1 afforded diradical zwitterions 2 and 3 by integer electron transfer. Upon binding to Lewis acids, the LUMO energy of 1 is significantly lowered and the band gap of the semiconductor is significantly narrowed from 1.93 eV (1) to 1.01 eV (2) and 1.06 eV (3). 2 and 3 are rare near-infrared (NIR) diradical dyes with broad absorption both centered around 1500 nm. By introducing a photo BCF generator, 2 can be generated by light-dependent control. Furthermore, the integer electron transfer process can also be reversibly regulated via the addition of CH3CN. In addition, the temperature of 2 sharply increased and reached as high as 110 °C in 10 s upon the irradiation of near-infrared-II (NIR-II) laser (1064 nm, 0.7 W cm-2), exhibiting a fast response to laser. It displays excellent photothermal stability with a photothermal (PT) conversion efficiency of 62.26 % and high-quality PT imaging.

Boosting Luminescence Efficiency of Near-Infrared-II Aggregation-Induced Emission Luminogens via a Mash-Up Strategy of π-Extension and Deuteration for Dual-Model Image-Guided Surgery

The simultaneous pursuit of accelerative radiative and restricted nonradiative decay is of tremendous significance to construct high-luminescence-efficiency fluorophores in the second near-infrared wavelength window (NIR-II), which is seriously hindered by the energy gap laws. Herein, a mash-up strategy of π-extension and deuteration is proposed to efficaciously ameliorate the knotty problem. By extending the π-conjugation of the aromatic fragment and introducing an isotope effect to the aggregation-induced emission luminogen (AIEgen), an improved oscillator strength (f), coupled with suppressed deformation and high-frequency oscillation in the excited state, are successively implemented. In this case, a faster rate of radiative decay (kr) and restricted nonradiative decay (knr) are simultaneously achieved. Moreover, the preeminent emissive property of AIEgen in the molecular state could be commendably inherited by the aggregates. The corresponding NIR-II emissive AIEgen-based nanoparticles display high brightness, large Stokes shift, and superior photostability simultaneously, which can be applied for image-guided cancer and sentinel lymph node (SLN) surgery. This work thus provides a rational roadmap to improve the luminescence efficiency of NIR-II fluorophores for biomedical applications.

3D-Printed Liquid Metal-in-Hydrogel Solar Evaporator: Merging Spectrum-Manipulated Micro-Nano Architecture and Surface Engineering for Solar Desalination

Solar desalination driven by interfacial heating is considered a promising technique to alleviate the freshwater shortage crisis. However, its further extension and application are confined by factors such as highlighted salt accumulation, inferior energy efficiency, and poor durability. Herein, a microsized eutectic gallium-indium (EGaIn) core-shell nanodroplet (denoted as LMTE) with photo-cross-linking and photothermal traits, stabilized by allyl glycidyl ether (AGE)-grafting tannic acid (TA), is explored as the solar absorber for broadband light absorbing and localized micro-nano heat channeling. The LMTE nanodroplets are formulated directly with highly hydrated polymers and photosensitive species to successfully develop a water-based photothermal ink suitable for digital light processing (DLP) 3D printing. As a demonstration, the LMTE composite hydrogel-forged milli-conical needle arrays with metal-phenolic network (MPN)-engineered wettability and photothermal enhancement can be printed by the digital light processing (DLP) technique and designed rationally via a bottom-up strategy. The 3D-printing hydrogel evaporator is composed of spectrum-tailored EGaIn nanodroplets for efficient photon harvesting and MPN-coated milli-cone arrays for water supplying with micro-nano channeling, which function cooperatively to bestow the 3D solar evaporator with superior solar-powered water evaporation (2.96 kg m-2 h-1, 96.93% energy efficiency) and excellent solar desalination (salt cycle and site-specific salt crystallization). Furthermore, a robust steam generating/collecting system of the 3D solar evaporator is demonstrated, providing valuable guidance for building a water-energy-agriculture nexus.

NIR-II photothermal conversion and imaging based on a cocrystal containing twisted components

On account of the scarcity of molecules with a satisfactory second near-infrared (NIR-II) response, the design of high-performance organic NIR photothermal materials has been limited. Herein, we investigate a cocrystal incorporating tetrathiafulvalene (TTF) and tetrachloroperylene dianhydride (TCPDA) components. A stable radical was generated through charge transfer from TTF to TCPDA, which exhibits strong and wide-ranging NIR-II absorption. The metal-free TTF-TCPDA cocrystal in this research shows high photothermal conversion capability under 1064 nm laser irradiation and clear photothermal imaging. The remarkable conversion ability-which is a result of twisted components in the cocrystal-has been demonstrated by analyses of single crystal X-ray diffraction, photoluminescence and femtosecond transient absorption spectroscopy as well as theoretical calculations. We have discovered that space charge separation and the ordered lattice in the TTF-TCPDA cocrystal suppress the radiative decay, while simultaneously strong intermolecular charge transfer enhances the non-radiative decay. The twisted TCPDA component induces rapid charge recombination, while the distorted configuration in TTF-TCPDA favors an internal non-radiative pathway. This research has provided a comprehensive understanding of the photothermal conversion mechanism and opened a new way for the design of advanced organic NIR-II photothermal materials.

Targeted delivery of organic small-molecule photothermal materials with engineered extracellular vesicles for imaging-guided tumor photothermal therapy

Imaging-guided photothermal therapy (PTT) for cancers recently gathered increasing focus thanks to its precise diagnosis and potent therapeutic effectiveness. Croconaine (CR) dyes demonstrate potential in expanding utility for near infrared (NIR) dyes in bio-imaging/theranostics. However, reports on CR dyes for PTT are scarce most likely due to the short of the efficacious delivery strategies to achieve specific accumulation in diseased tissues to induce PTT. Extracellular vesicles (EVs) are multifunctional nanoparticle systems that function as safe platform for disease theragnostics, which provide potential benefits in extensive biomedical applications. Here, we developed a novel delivery system for photothermal molecules based on a CR dye that exerts photothermal activity through CDH17 nanobody-engineered EVs. The formed CR@E8-EVs showed strong NIR absorption, excellent photothermal performance, good biological compatibility and superb active tumor-targeting capability. The CR@E8-EVs can not only visualize and feature the tumors through CR intrinsic property as a photoacoustic imaging (PAI) agent, but also effectively retard the tumor growth under laser irradiation to perform PTT. It is expected that the engineered EVs will become a novel delivery vehicle of small organic photothermal agents (SOPTAs) in future clinical PTT applications.

Advancing Energy Harvesting Efficiency from a Single Droplet: A Mechanically Guided 4D Printed Elastic Hybrid Droplet-Based Electricity Generator

A droplet possesses the ubiquity and potential to harvest a vast amount of energy. To exploit droplets effectively, a novel output enhancement strategy that can coexist and create synergy with the recently studied droplet-based electricity generator (DEG) and material/surface structure modification must be investigated. In this study, a mechanical buckling-based 4D printed elastic hybrid droplet-based electricity generator (HDEG) consisting of a DEG and solid-solid triboelectric nanogenerator (S-S TENG) is first presented. During the electricity generation process of the DEG by droplet impact, the HDEG structure, which is merged via a simple 4D printing technique, permits the conversion of dissipated energy into elastic energy, resulting in an S-S TENG output. The HDEG outputs are naturally integrated owing to the simultaneous activation of a single droplet, resulting in an approximately 30% improvement over the output of a single DEG. Internal and external parametric studies are performed as HDEG design guidelines. The HDEG exhibits a 25% better energy supply performance than that of a single DEG, demonstrating its applicability as a power source. This research proposes the way toward a hybrid system that efficiently harvests energy from ubiquitous droplets.

Redox: Organic Robust Radicals and Their Polymers for Energy Conversion/Storage Devices

Persistent radicals can hold their unpaired electrons even under conditions where they accumulate, leading to the unique characteristics of radical ensembles with open-shell structures and their molecular properties, such as magneticity, radical trapping, catalysis, charge storage, and electrical conductivity. The molecules also display fast, reversible redox reactions, which have attracted particular attention for energy conversion and storage devices. This paper reviews the electrochemical aspects of persistent radicals and the corresponding macromolecules, radical polymers. Radical structures and their redox reactions are introduced, focusing on redox potentials, bistability, and kinetic constants for electrode reactions and electron self-exchange reactions. Unique charge transport and storage properties are also observed with the accumulated form of redox sites in radical polymers. The radical molecules have potential electrochemical applications, including in rechargeable batteries, redox flow cells, photovoltaics, diodes, and transistors, and in catalysts, which are reviewed in the last part of this paper.

Synergistic Dual-Mechanism Localized Heat Channeling and Spectrum-Tailored Liquid Metal Hydrogels for Efficient Solar Water Evaporation and Desalination

Photothermal hydrogels featuring broadband light absorption abilities and highly hydrated networks provide an appealing mass-energy transfer platform for water evaporation by using solar energy. However, the targeted delivery of solar heat energy to power the water evaporation process remains challenging. Herein, enlightened by metal-phenolic coordination chemistry and camouflaged architecture, photothermal hydrogels with dual-mechanism vaporization structure are tactfully designed via a rational interfacial engineering and integration strategy to enable near-µm heat confinement and highly efficient light-to-heat conversion ability. The spectrum-tailored liquid metal droplet (LMGAs-FeIII ) and optimized carbon-wrapped silver nanowire sponge (Ag@C750 ) are integrally built as photothermal promotors/channels and jointly embedded into a highly hydratable poly(vinyl alcohol) hydrogel, denoted as PALGH, to synergistically boost water molecule activation and interfacial vaporization behavior by triggering robust photothermal performance. As a result, under one sun irradiation, the all-embracing PALGH hydrogel evaporation system achieves a brine evaporation rate to a high level of 3.47 kg m-2 h-1 , and >19 L m-2 clean water of PALGH is ideally delivered daily when purifying natural seawater. This work offers not only a rational design principle to create sophisticated photothermal materials but also replenishes insight into solar heat generation and water transportation in a cross-media system.

CeO2@CuS@PDA-FA as targeted near-infrared PTT/CDT therapeutic agents for cancer cells

Single tumor treatment method usually has some defects, which makes it difficult to achieve good therapeutic effect. The ingenious combination of multiple tumor treatment methods on a single nanoplatform to achieve multifunctional treatment can effectively improve the efficiency of treatment. The targeted modification of nanomaterials can augment the precision of nanotherapeutic drugs in tumor treatment. Herein, a multifunctional nanoplatform (CeO2@CuS@PDA-FA) based on cerium dioxide nanoparticles engineered with copper sulfide (CeO2@CuS) has been constructed for synergistic photothermal therapy (PTT) and chemodynamic therapy (CDT). The CeO2@CuS were coated using polydopamine (PDA), and the modification of PDA surface by folic acid, in order to achieve the targeted effect for tumors. The localized hyperthermia induced by PTT can further improve the CDT efficiency of the nanoplatform, leading to a PTT/CDT synergistic effect. The nanoplatform possessed the capability of cancer cell-targeted and achieved better therapeutic efficacyin vitro. This work provided a new strategy for combined multifunctional theranostic platform and shows strong potential in practical applications.

Second-Generation Soft Actuators Driven by NIR Light Based on Croconaine Dye-Doped Vitrimers

Soft actuators with photo-response can be selectively driven by the light source, but it is challenging to achieve a selective response of multiple components under a uniform light field, which is actually of great importance for the development of soft robots. In this work, a series of near-infrared light (NIR)-responsive vitrimers (CR-vitrimers) are synthesized by carboxylate transesterification using carboxyl-bearing croconaine dye (CR-800) as a photothermal agent (PTA). NIR-responsive liquid crystalline elastomers (CR-vitrimer-LCEs) under NIR laser (λmax = 808 nm) without the template can be further prepared. More importantly, the dynamic covalent bonding properties of vitrimer allow for the fabrication of a hand-shaped actuator by hot pressing, consisting of "fingers" with different NIR-response threshold values. After programming as needed, the hand-shaped actuator successfully achieves local and sequential control under a uniform NIR light field.

Self-Healing Silicone Materials: Looking Back and Moving Forward

This review is dedicated to self-healing silicone materials, which can partially or entirely restore their original characteristics after mechanical or electrical damage is caused to them, such as formed (micro)cracks, scratches, and cuts. The concept of self-healing materials originated from biomaterials (living tissues) capable of self-healing and regeneration of their functions (plants, human skin and bones, etc.). Silicones are ones of the most promising polymer matrixes to create self-healing materials. Self-healing silicones allow an increase of the service life and durability of materials and devices based on them. In this review, we provide a critical analysis of the current existing types of self-healing silicone materials and their functional properties, which can be used in biomedicine, optoelectronics, nanotechnology, additive manufacturing, soft robotics, skin-inspired electronics, protection of surfaces, etc.

Mechanism of Cytotoxic Action of Gold Nanorods Photothermal Therapy for A549 Cell

Photothermal therapy has developed into an important field of tumor treatment research, and numerous studies have focused on the preparation of photothermal therapeutic agents, tumor targeting, diagnosis, and treatment integration. However, there are few studies on the mechanism of photothermal therapy acting on cancer cells. Here we investigated the metabolomics of lung cancer cell A549 during gold nanorod (GNR) photothermal treatment by high-resolution LC/MS, and several differential metabolites and corresponding metabolic pathways during photothermal therapy were found. The main differential metabolites contained 18-hydroxyoleate, beta-alanopine and cis-9,10-epoxystearic acid, and phosphorylcholine. Pathway analysis also showed metabolic changes involving cutin, suberine, and wax biosynthesis, pyruvate and glutamic acid synthesis, and choline metabolism. Analysis also showed that the photothermal process of GNRs may induce cytotoxicity by affecting pyruvate and glutamate synthesis, normal choline metabolism, and ultimately apoptosis.

Engineering of Small Molecular Organic Nanoparticles for Mitochondria-Targeted Mild Photothermal Therapy of Malignant Breast Cancers

Conventional photothermal therapy (PTT) often causes unwanted hyperthermia damage to surrounding healthy tissues, and as well fails in ablation of infiltrating and malignant tumors, which even leads to tumor recurrence....