Catalytic Kinetics Regulation for Enhanced Electrochemical Nitrogen Oxidation by Ru-Nanoclusters-Coupled Mn3 O4 Catalysts Decorated with Atomically Dispersed Ru Atoms

High-Entropy Perovskite Oxides as a Family of Electrocatalysts for Efficient and Selective Nitrogen Oxidation

Electrocatalytic nitrogen oxidation reaction (NOR) can convert nitrogen (N2) into nitrate (NO3-) under ambient conditions, providing an attractive approach for synthesis of NO3-, alternative to the current approach involving the harsh Haber-Bosch and Ostwald oxidation processes that necessitate high temperature, high pressure, and substantial carbon emission. Developing efficient NOR catalysts is a prerequisite, which remains a formidable challenge, owing to the weak activation/dissociation of N2. A variety of NOR electrocatalysts have been developed, but their NOR kinetics are still extremely sluggish, resulting in inferior Faradaic Efficiencies. Here, we report a high-entropy Ru-based perovskite oxide (denoted as Ru-HEP) that can function as a high-performance NOR catalyst and exhibit a high NO3- yield rate of 39.0 μmol mg-1 h-1 with a Faradaic Efficiency of 32.8%. Both our experimental results and theoretical calculations suggest that the high-entropy configuration of Ru-HEP perovskite oxide can markedly enhance the oxygen-vacancy concentration, where the Ru sites and their neighboring oxygen vacancies can serve as unsaturated centers and decrease the overall energy barrier for N2 electrooxidation, thereby leading to promoted NOR kinetics. This work presents an alternative avenue for promoting NOR catalysis on perovskite oxides through the high-entropy engineering strategy.

Energizing Co Active Sites via d-Band Center Engineering in CeO2-Co3O4 Heterostructures: Interfacial Charge Transfer Enabling Efficient Nitrate Electrosynthesis

The electrochemical nitrogen oxidation reaction (NOR) holds significant potential to revolutionize the traditional nitrate synthesis processes. However, the progression in NOR has been notably stymied due to the sluggish kinetics of initial N2 adsorption and activation processes. Herein, the research embarks on the development of a CeO2-Co3O4 heterostructure, strategically engineered to facilitate the electron transfer from CeO2 to Co3O4. This orchestrated transfer operates to amplify the d-band center of the Co active sites, thereby enhancing N2 adsorption and activation dynamics by strengthening the Co─N bond and diminishing the resilience of the N≡N bond. The synthesized CeO2-Co3O4 manifests promising prospects, showcasing a significant HNO3 yield of 37.96 µg h-1 mgcat -1 and an elevated Faradaic efficiency (FE) of 29.30% in a 0.1 m Na2SO4 solution at 1.81 V versus RHE. Further substantiating these findings, an array of in situ methodologies coupled with DFT calculations vividly illustrate the augmented adsorption and activation of N2 on the surface of CeO2-Co3O4 heterostructure, resulting in a substantial reduction in the energy barrier pertinent to the rate-determining step within the NOR pathway. This research carves a promising pathway to amplify N2 adsorption throughout the electrochemical NOR operations and delineates a blueprint for crafting highly efficient NOR electrocatalysts.

Single-atom Mn sites confined into hierarchically porous core-shell nanostructures for improved catalysis of oxygen reduction

Applications of zinc-air batteries are partially limited by the slow kinetics of oxygen reduction reaction (ORR); Thus, developing effective strategies to address the compatibility issue between performance and stability is crucial, yet it remains a significant challenge. Here, we propose an in situ gas etching-thermal assembly strategy with an in situ-grown graphene-like shell that will favor Mn anchoring. Gas etching allows for the simultaneous creation of mesopore-dominated carbon cores and ultrathin carbon layer shells adorned entirely with highly dispersed Mn-N4 single-atom sites. This approach effectively resolves the compatibility issue between activity and stability in a single step. The unique core-shell structure allows for the full exposure of active sites and effectively prevents the agglomerations and dissolution of Mn-N4 sites in cores. The corresponding half-wave potential for ORR is up to 0.875 V (vs. reversible hydrogen electrode (RHE)) in 0.1 M KOH. The gained catalyst (Mn-N@Gra-L)-assembled zinc-air battery has a high peak power density (242 mW cm-2) and a durability of ∼ 115 h. Furthermore, replacing the zinc anode achieved a stable cyclic discharge platform of ∼ 20 h at varying current densities. Forming more fully exposed and stable existing Mn-N4 sites is a governing factor for improving the electrocatalytic ORR activity, significantly cycling durability, and reversibility of zinc-air batteries.

Laser regulated mixed-phase TiO2 for electrochemical overall nitrogen fixation

Traditional oxide electrocatalytic materials encounter significant challenges associated with sluggish reaction kinetics and formidable energy barriers for NH intermediates formation in electrocatalytic nitrogen fixation. The implementation of phase control emerges as an effective strategy to address these challenges. Herein, leveraging the energy localization of laser, this work achieved precise phase control of TiO2. In the optimized material system, the rutile phase TiO2 facilitates nitrogen adsorption, while the anatase phase TiO2 provides proton sources and active oxygen species. The synergistic effect of the two phases effectively enhances the electrocatalytic activity for nitrogen reduction and oxidation, with an ammonia yield reaching ∼22.3 μg h-1 cm-2 and a nitrate yield reaching ∼60.9 μg h-1 cm-2. Furthermore, a coupled dual-electrode system with mixed-phase titanium dioxide as both the anode and cathode successfully achieved a breakthrough in electrochemical overall nitrogen fixation. This laser precision control strategy for manipulating phase sites lays the groundwork for designing efficient catalysts for energy conversion and even energy storage nanomaterials.

Ice-Templated Synthesis of Atomic Cluster Cocatalyst with Regulable Coordination Number for Enhanced Photocatalytic Hydrogen Evolution

Supported metal catalysts have been exploited in various applications. Among them, cocatalyst supported on photocatalyst is essential for activation of photocatalysis. However, cocatalyst decoration in a controllable fashion to promote intrinsic activity remains challenging. Herein, a versatile method is developed for cocatalyst synthesis using an ice-templating (ICT) strategy, resulting in size control from single-atom (SA), and atomic clusters (AC) to nanoparticles (NP). Importantly, the coordination numbers (CN) of decorated AC cocatalysts are highly controllable, and this ICT method applies to various metals and photocatalytic substrates. Taking narrow-band gap Ga-doped La5Ti2Cu0.9Ag0.1O7S5 (LTCA) photocatalyst as an example, supported Ru AC/LTCA catalysts with regulable Ru CNs have been prepared, delivering significantly enhanced activities compared to Ru SA and Ru NPs supported on LTCA. Specifically, Ru(CN = 3.4) AC/LTCA with an average CN of Ru─Ru bond measured to be ≈3.4 exhibits excellent photocatalytic H2 evolution rate (578 µmol h-1) under visible light irradiation. Density functional theory calculation reveals that the modeled Ru(CN = 3) atomic cluster cocatalyst possesses favorable electronic properties and available active sites for the H2 evolution reaction.

Selective Extraction of Critical Metals from Spent Li-Ion Battery Cathode: Cation-Anion Coordination and Anti-Solvent Crystallization

Owing to continuing global use of lithium-ion batteries (LIBs), in particular in electric vehicles (EVs), there is a need for sustainable recycling of spent LIBs. Deep eutectic solvents (DESs) are reported as "green solvents" for low-cost and sustainable recycling. However, the lack of understanding of the coordination mechanisms between DESs and transition metals (Ni, Mn and Co) and Li makes selective separation of transition metals with similar physicochemical properties practically difficult. Here, it is found that the transition metals and Li have a different stable coordination structure with the different anions in DES during leaching. Further, based on the different solubility of these coordination structures in anti-solvent (acetone), a leaching and separation process system is designed, which enables high selective recovery of transition metals and Li from spent cathode LiNi1/3Co1/3Mn1/3O2 (NCM111), with recovery of acetone. Recovery of spent LiCoO2 (LCO) cathode is also evidenced and a significant selective recovery for Co and Li is established, together with recovery and reuse of acetone and DES. It is concluded that the tuning of cation-anion coordination structure and anti-solvent crystallization are practical for selective recovery of critical metal resources in the spent LIBs recycling.

Catalyst-Free Activation and Fixation of Nitrogen by Laser-Induced Conversion

Ultrafast N2 fixation reactions are quite challenging. Currently used methods for N2 fixation are limited, and strong dinitrogen bonds usually need to be activated via extreme temperature or pressure or by the use of an energy-consuming process with sophisticated catalysts. Herein, we report a novel laser-based chemical method for N2 fixation under ambient conditions without catalysts, this method is called laser bubbling in liquids (LBL), and it directly activates N2 in water (H2O) and efficiently converts N2 into valuable NH3 (max: 4.2 mmol h-1) and NO3- (0.17 mmol h-1). Remarkably, the highest yields of NH3 and NO3- are 4 orders of magnitude greater than the best values for electrocatalysis reported to date. Notably, we further validate the experimental mechanism by using optical emission spectroscopy to detect the production of intermediate plasma and by employing isotope tracing. We also establish that an extremely high-temperature environment far from thermodynamic equilibrium inside a laser-induced bubble and the kinetic process of rapid quenching of bubbles is crucial for N2 activation and fixation to generate NH3 and NOx via LBL. Based on these results, it is shown that LBL is a simple, safe, efficient, green, and sustainable technology that enables the rapid conversion of the renewable feedstocks H2O and N2 to NH3 and NO3-, facilitating new prospects for chemical N2 fixation.

Bismuth-Based Electrocatalysts for Identical Value-Added Formic Acid Through Coupling CO2 Reduction and Methanol Oxidation

It is an effective way to reduce atmospheric CO2 via electrochemical CO2 reduction reaction (CO2RR), while the slow oxygen evolution reaction (OER) occurs at the anode with huge energy consumption. Herein, methanol oxidation reaction (MOR) is used to replace OER, coupling CO2RR to achieve co-production of formate. Through enhancing OCHO* adsorption by oxygen vacancies engineering and synergistic effect by heteroatom doping, Bi/Bi2O3 and Ni─Bi(OH)3 are synthesized for efficient production of formate via simultaneous CO2RR and methanol oxidation reaction (MOR), achieving that the coupling of CO2RR//MOR only required 7.26 kWh gformate -1 power input, much lower than that of CO2RR//OER (13.67 kWh gformate -1). Bi/Bi2O3 exhibits excellent electrocatalytic CO2RR performance, achieving FEformate >80% in a wide potential range from -0.7 to -1.2 V (vs RHE). For MOR, Ni─Bi(OH)3 exhibits efficient MOR catalytic performance with the FEformate >98% in the potential range of 1.35-1.6 V (vs RHE). Not only demonstrates the two-electrode systems exceptional stability, working continuously for over 250 h under a cell voltage of 3.0 V, but the cathode and anode can maintain a FE of over 80%. DFT calculation results reveal that the oxygen vacancies of Bi/Bi2O3 enhance the adsorption of OCHO* intermediate, and Ni─Bi(OH)3 reduce the energy barrier for the rate determining step, leading to high catalytic activity.

Non-Photochemical Origin of Selectivity Difference between Light and Dark Catalytic Conditions

The interest in introducing light into heterogeneous catalysis is driven not only by the urgent need of replacing fossil energy but also by the promise of controlling product selectivity by light. The product selectivity differences observed in recent studies between light and dark reactions are often attributed to photochemical effects. Here, we report the discovery of a non-photochemical origin of selectivity difference, at essentially the same CO2 conversion rate, between photothermal and thermal CO2 hydrogenation reactions over a Ru/TiO2-x catalyst. While the presence of the photochemical effect from ultraviolet light is confirmed, it merely enhances the catalytic activity. Systematic investigation reveals that the gradual formation of an adsorbate-mediated strong metal-support interaction under catalytic conditions is responsible for the variation in the catalytic selectivity. We demonstrate that differences in product selectivity under light/dark reactions do not necessarily originate from photochemical effects. Our study refines the basis for determining photochemical effects and highlights the importance of excluding non-photochemical effects in mechanistic studies of light-controlled product selectivity.

Capture and Utilization of CO2 with Morpholine for Effective Photocatalytic N-Formylmorpholine Production

Converting into high-value-added products represents the most optimal approach to CO2 utilization. The substitution of CO with CO2 as a potential critical material for formamide production is widely regarded as an ideal pathway and has garnered significant attention. However, high temperatures and pressures remain essential for the reaction, exerting a substantial influence on the utilization process. Herein, N-formylmorpholine was creatively synthesized by integrating the capture and solar-driven utilization of CO2 with morpholine. Notably, a remarkable N-formylmorpholine yield of 11433.3 μmol·h-1·g-1 was obtained, surpassing pure MoO3 by an astounding factor of 89.1 with a N-formylmorpholine yield of 63.8 μmol in 6 h, which is an astonishing increase of 57.5 times compared to MoO3. Both experimental results and density functional theory calculations suggest that the inclusion of Fe can effectively reduce the formation energy barrier while facilitating the desorption process of N-formylmorpholine, thereby optimizing the overall performance.

Sulfur Migration Enhanced Proton-Coupled Electron Transfer for Efficient CO2 Desorption with Core-Shelled C@Mn3O4

Transforming hazardous species into active sites by ingenious material design was a promising and positive strategy to improve catalytic reactions in industrial applications. To synergistically address the issue of sluggish CO2 desorption kinetics and SO2-poisoning solvent of amine scrubbing, we propose a novel method for preparing a high-performance core-shell C@Mn3O4 catalyst for heterogeneous sulfur migration and in situ reconstruction to active -SO3H groups, and thus inducing an enhanced proton-coupled electron transfer (PCET) effect for CO2 desorption. As anticipated, the rate of CO2 desorption increases significantly, by 255%, when SO2 is introduced. On a bench scale, dynamic CO2 capture experiments reveal that the catalytic regeneration heat duty of SO2-poisoned solvent experiences a 32% reduction compared to the blank case, while the durability of the catalyst is confirmed. Thus, the enhanced PCET of C@Mn3O4, facilitated by sulfur migration and simultaneous transformation, effectively improves the SO2 resistance and regeneration efficiency of amine solvents, providing a novel route for pursuing cost-effective CO2 capture with an amine solvent.

Controllable Assembly of Highly Oxidized Cobalt on Graphdiyne Surface for Efficient Conversion of Nitrogen into Nitric Acid

The manufacture of nitric acid (HNO3 ) consumes large amounts of energy and causes serious environmental pollution. Electrochemical synthesis is regarded as a key way to eliminate carbon emissions from the chemicals industry. The selective electrosynthesis of HNO3 from nitrogen was achieved by controllable assembly of cobalt metal on graphdiyne surface using a powerful tool of electrochemistry at ambient conditions. As an advanced material, graphdiyne (GDY) has a large conjugated structure on its surface and is rich in sp-C triple bond skeleton, which can achieve strong interaction with metal atoms, resulting in incomplete charge transfer between graphdiyne and cobalt atoms. The experimental and theoretical calculation results show that the highly oxidized cobalt on graphdiyne (HOCo/GDY) can selectively and efficiently activate and convert the nitrogen into the key intermediate *NO, which promotes the efficient overall conversion performance of nitrogen to nitric acid. Thus, the highest nitric acid yield (192.0 μg h-1  mg-1 ) and Faradaic efficiency (21.5 %) were achieved at low potentials.

In situ assembly of Ni3S2 nanosheets encapsulated with NiFe(oxy)hydroxides for efficient water oxidation

Morphology control plays a pivotal role in achieving an exceptionally efficient electrocatalyst with abundant active sites and outstanding electrical conductivity. In this study, we employed a sophisticated chemical nanoengineering technique to fabricate an exquisitely thin NiFe(OH)x electrocatalyst on Ni3S2 nanosheets. Firstly, the Ni3S2 nanosheets were synthesized through an innovative in situ one-step sulfurization reaction of the Ni(OH)2 nanosheets grown on Ni foam. Subsequently, a remarkable ultrathin layer of NiFe(OH)x was precisely deposited onto the surface of the Ni3S2 to form a captivating core-shell structure using a chemical dipping method. The resulting electrode, denoted as NiFe(OH)x/Ni3S2/NF, exhibited exceptional electrocatalytic activity and durability towards the oxygen evolution reaction (OER), owing to its expansive specific surface area, rapid electron transport, and robust interlayer bonding. Notably, this electrode achieved an impressive current density of 100 mA cm-2 at an astonishingly low overpotential of 218 mV while maintaining a low Tafel slope of 37.9 mV dec-1 and remarkable stability for up to 12 days in 1 M KOH aqueous solution. This work presents an alluring novel approach for constructing highly efficient ultrathin catalysts for water splitting.

Perovskite Oxide as A New Platform for Efficient Electrocatalytic Nitrogen Oxidation

Electrocatalytic nitrogen oxidation reaction (NOR) offers an efficient and sustainable approach for conversion of widespread nitrogen (N2 ) into high-value-added nitrate (NO3 - ) under mild conditions, representing a promising alternative to the traditional approach that involves harsh Haber-Bosch and Ostwald oxidation processes. Unfortunately, due to the weak absorption/activation of N2 and the competitive oxygen evolution reaction, the kinetics of NOR process is extremely sluggish accompanied with low Faradaic efficiencies and NO3 - yield rates. In this work, an oxygen-vacancy-enriched perovskite oxide with nonstoichiometric ratio of strontium and ruthenium (denoted as Sr0.9 RuO3 ) was synthesized and explored as NOR electrocatalyst, which can exhibit a high Faradaic efficiency (38.6 %) with a high NO3 - yield rate (17.9 μmol mg-1  h-1 ). The experimental results show that the amount of oxygen vacancies in Sr0.9 RuO3 is greatly higher than that of SrRuO3 , following the same trend as their NOR performance. Theoretical simulations unravel that the presence of oxygen vacancies in the Sr0.9 RuO3 can render a decreased thermodynamic barrier toward the oxidation of *N2 to *N2 OH at the rate-determining step, leading to its enhanced NOR performance.

Single Ru Sites on Covalent Organic Framework-Coated Carbon Nanotubes for Highly Efficient Electrocatalytic Hydrogen Evolution

Covalent organic frameworks (COFs) with precisely controllable structures and highly ordered porosity possess great potential as electrocatalysts for hydrogen evolution reaction (HER). However, the catalytic performance of pristine COFs is limited by the poor active sites and low electron transfer. Herein, to address these issues, the conductive carbon nanotubes (CNTs) are coated by a defined structure RuBpy(H2 O)(OH)Cl2 in bipyridine-based COF (TpBpy). And this composite with single site Ru incorporated can be used as HER electrocatalyst in alkaline conditions. A series of crucial issues are carefully discussed through experiments and density functional theory (DFT) calculations, such as the coordination structure of the atomically dispersion Ru ions, the catalytic mechanism of the embedded catalytic site, and the effect of COF and CNTs on the electrocatalytic properties. According to DFT calculations, the embedded single sites Ru act as catalytic sites for H2 generation. Benefitting from increasing the catalyst conductivity and the charge transfer, the as-prepared c-CNT-0.68@TpBpy-Ru shows an excellent HER overpotential of 112 mV at 10 mA cm-2 under alkaline conditions as well as an excellent durability up to 12 h, which is superior to that of most of the reported COFs electrocatalysts in alkaline solution.

Phase Engineering of 2D Spinel-Type Manganese Oxides

2D magnetic materials have been of interest due to their unique long-range magnetic ordering in the low-dimensional regime and potential applications in spintronics. Currently, most studies are focused on strippable van der Waals magnetic materials with layered structures, which typically suffer from a poor stability and scarce species. Spinel oxides have a good environmental stability and rich magnetic properties. However, the isotropic bonding and close-packed nonlayered crystal structure make their 2D growth challenging, let alone the phase engineering. Herein, a phase-controllable synthesis of 2D single-crystalline spinel-type oxides is reported. Using the van der Waals epitaxy strategy, the thicknesses of the obtained tetragonal and hexagonal manganese oxide (Mn3 O4 ) nanosheets can be tuned down to 7.1 nm and one unit cell (0.7 nm), respectively. The magnetic properties of these two phases are evaluated using vibrating-sample magnetometry and first-principle calculations. Both structures exhibit a Curie temperature of 48 K. Owing to its ultrathin geometry, the Mn3 O4 nanosheet exhibits a superior ultraviolet detection performance with an ultralow noise power density of 0.126 pA Hz-1/2 . This study broadens the range of 2D magnetic semiconductors and highlights their potential applications in future information devices.

Amazing enhancement of OER performances: creating a well-designed functional Ni and N-doped carbon layer as a support material for fabricating a NiFe-LDH electrocatalyst

A well-designed support material between catalyst and substrate can always significantly enhance the performance of an electrode on water oxidation. In this work, a functional Ni and N-doped carbon layer (NNC) was designed on carbon paper (CP) via pyrolysis by using a controlled electrodeposited polyporphyrin as a precursor. Consequently, the fabricated NiFe-LDH/NNC/CP achieved a catalytic current density of 100 mA cm-2 at a small overpotential of 231 mV with a low Tafel slope of 26.0 mV dec-1, as well as high durability for more than 360 h. The insights are that N-doping reinforces the hydrophilicity and the catalyst binding capacity, while Ni-doping intensifies the conductivity.

Efficient Nitrate Generation through Electrochemical N2 Oxidation with Nickel Oxyhydroxide Decorated Copper Hydroxide Driven by Solar Cells

Electrocatalytic nitrogen oxidation reaction (NOR) into nitrate under ambient conditions, as an alternative to replace traditional industrial method, is a promising artificial N2 fixation strategy, especially powered by renewable energy. Here, through skillfully balancing competitive relationships between NOR and oxygen evolution reaction (OER), the nickel oxyhydroxide decorated Cu(OH)2 hybrid electrocatalyst with Cu:Ni molar ratio of 1:1 is developed, which achieves outstanding Faradaic efficiency (FE) of 18.7% and yield rate of 228.24 µmol h-1  gcat -1 at 2.0 V versus reversible hydrogen electrode (RHE) in the electrolyte of 0.1 m Na2 SO4 . Also, the hybrid catalyst maintained over five cycles (10 h each cycle) with negligible decay in performance. The synergetic effect between the components of nickel oxyhydroxide and Cu(OH)2 is found to remarkably activate N2 and suppress the activity of competitive OER, which enhances NOR performance eventually. Moreover, the conversion efficiency of solar-to-nitrate (STN) with 0.025% was obtained by coupling with a commercial solar cell. This work provides a novel avenue of rational catalysts design strategies and realizes solar-to-nitrate synthesis.

Efficient electrocatalytic reduction of nitrate to ammonia over fibrous SmCoO3 under ambient conditions

We report SmCoO₃ nanofibers as an efficient catalyst for nitrate reduction to ammonia. This catalyst achieves a large NH₃ yield of 14.4 mg h^-1 mg_cat.^-1 and a high faradaic efficiency of 81.3% at -1.0 V vs. RHE in 0.1 M PBS with 0.1 M NaNO₃, and it also displays excellent electrochemical durability and structural stability. Theoretical calculations indicate that Sm-O and Co-O bonds have an incredibly low adsorption energy of -0.1 eV, which can significantly reduce the applied potential and hence enhance the catalytic activity.

Pulsed Electrocatalysis Enabling High Overall Nitrogen Fixation Performance for Atomically Dispersed Fe on TiO2

Atomically dispersed Fe was designed on TiO₂ and explored as a Janus electrocatalyst for both nitrogen oxidation reaction (NOR) and nitrogen reduction reaction (NRR) in a two-electrode system. Pulsed electrochemical catalysis (PE) was firstly involved to inhibit the competitive hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Excitingly, an unanticipated yield of 7055.81 μmol h^-1  g^-1 _cat. and 12 868.33 μmol h^-1  g^-1 _cat. were obtained for NOR and NRR at 3.5 V, respectively, 44.94 times and 7.8 times increase in FE than the conventional constant voltage electrocatalytic method. Experiments and density functional theory (DFT) calculations revealed that the single-atom Fe could stabilize the oxygen vacancy, lower the energy barrier for the vital rupture of N≡N, and result in enhanced N₂ fixation performance. More importantly, PE could effectively enhance the N₂ supply by reducing competitive O₂ and H₂ agglomeration, inhibit the electrocatalytic by-product formation for longstanding *OOH and *H intermediates, and promote the non-electrocatalytic process of N₂ activation.

Achievements, Challenges, and Perspectives on Nitrogen Electrochemistry for Carbon-Neutral Energy Technologies

Unrestrained anthropogenic activities have severely disrupted the global natural nitrogen cycle, causing numerous energy and environmental issues. Electrocatalytic nitrogen transformation is a feasible and promising strategy for achieving a sustainable nitrogen economy. Synergistically combining multiple nitrogen reactions can realize efficient renewable energy storage and conversion, restore the global nitrogen balance, and remediate environmental crises. Here, we provide a unique aspect to discuss the intriguing nitrogen electrochemistry by linking three essential nitrogen-containing compounds (i.e., N₂ , NH₃ , and NO₃ ^- ) and integrating four essential electrochemical reactions, i.e., the nitrogen reduction reaction (N₂ RR), nitrogen oxidation reaction (N₂ OR), nitrate reduction reaction (NO₃ RR), and ammonia oxidation reaction (NH₃ OR). This minireview also summarizes the acquired knowledge of rational catalyst design and underlying reaction mechanisms for these interlinked nitrogen reactions. We further underscore the associated clean energy technologies and a sustainable nitrogen-based economy.

Perovskites with Enriched Oxygen Vacancies as a Family of Electrocatalysts for Efficient Nitrate Reduction to Ammonia

Electrochemical nitrate reduction to ammonia (NRA) provides an efficient, sustainable approach to convert the nitrate pollutants into value-added products, which is regarded as a promising alternative to the industrial Haber-Bosch process. Recent studies have shown that oxygen vacancies of oxide catalysts can adjust the adsorption energies of intermediates and affect their catalytic performance. Compared with other metal oxides, perovskite oxides can allow their metal cations to exist in abnormal or mixed valence states, thereby resulting in enriched oxygen vacancies in their crystal structures. Here, the catalytic activities of perovskite oxides toward NRA catalysis with respect to the amount of oxygen vacancies are explored, where four perovskite oxides with different crystal structures (including cubic LaCrO₃ , orthorhombic LaMnO₃ and LaFeO₃ , hexagonal LaCoO₃ ) are chosen and investigated. By combining X-ray photoelectron spectroscopy, electron paramagnetic resonance spectroscopy and electrochemical measurements, it is found that the amount of oxygen vacancies in these perovskite oxides surprisingly follow the same order as their activities toward NRA catalysis (LaCrO₃  < LaMnO₃  < LaFeO₃  < LaCoO₃ ). Further theoretical studies reveal that the existence of oxygen vacancies in LaCoO₃ perovskite can decrease the energy barriers for reduction of *HNO₃ to *NO₂ , leading to its superior NRA performance.

Limitations of Electrochemical Nitrogen Oxidation toward Nitrate

The electrocatalytic N₂ oxidation reaction (NOR) using renewable electricity is a promising alternative to the industrial synthesis of nitrate from NH₃ oxidation. However, breaking the triple bond in the nitrogen molecule is one of the most essential challenges in chemistry. In this work, we use density functional theory simulations to investigate the plausible reaction mechanisms of electrocatalytic NOR and its competition with oxygen evolution reaction (OER) at the atomic scale. We focus on the electrochemical conversion of inert N₂ to active *NO during NOR. We propose formation of *N₂O from *N₂ and *O as the rate-determining step (RDS). Following the RDS, a microkinetic model is utilized to study the rate of NOR on metal oxides. Our results demonstrate that a lower activation energy is obtained when a catalyst binds *O weakly. We show that the reaction is extremely challenging but also that design strategies have been suggested to promote electrochemical NOR.

Thermal Migration Promotes the Formation of Manganese and Nitrogen Doped Polyhedral Surface for Boosted Oxygen Reduction Electrocatalysis

Increasing the oxygen reduction reaction (ORR) catalytic activity of carbon-based electrocatalysts with robust stability is of great significance for their application. Herein, a feasible thermal migration strategy was proposed to construct manganese- and nitrogen-doped carbonaceous polyhedron frameworks coupled with manganese monoxide microrods (MnO-NC). Mn species were migrated to the surface of polyhedron frameworks, the shape of which was maintained at the high-temperature treatment. The Mn thermal migration not only created highly dispersed Mn-N_x active sites but also promoted graphitization, which benefited ORR electrocatalysis. Moreover, the MnO microrod-supported polyhedron frameworks provide beneficial mass transfer channels for electrocatalysis. Therefore, MnO-NC exhibited impressive ORR catalytic activity and stability in both alkaline and neutral electrolytes compared to commercial Pt/C catalysts. A magnesium-air battery (MAB) driven by MnO-NC delivered a high open circuit voltage and peak power density comparable to that driven by Pt/C. Notably, MnO-NC-driven MAB possessed a longer discharge time than the Pt/C-driven one, indicative of the superior catalytic performance of Mn-NC. This work provides a simple but effective strategy to construct carbonaceous framework electrocatalysts for boosted ORR, promoting the widespread application of metal-air batteries and fuel cells.

Sulfate-Enabled Nitrate Synthesis from Nitrogen Electrooxidation on a Rhodium Electrocatalyst

The electrocatalytic nitrogen oxidation reaction (NOR) to generate nitrate is gaining increasing attention as an alternative approach to the conventional industrial manufacture. But, current progress in NOR is limited by the difficulties in activation and conversion of the strong N≡N bond (941 kJ mol^-1 ). Herein, we designed to utilize sulfate to enhance NOR performance over an Rh electrocatalyst. After the addition of sulfate, the inert Rh nanoparticles exhibited superior NOR performance with a nitrate yield of 168.0 μmol g_cat ^-1  h^-1 . The ¹⁵ N isotope-labeling experiment confirmed the produced nitrate from nitrogen electrooxidation. A series of electrochemical in situ characterizations and theoretical calculation unveiled that sulfate promoted nitrogen adsorption and decreased the reaction energy barrier, and in situ formed sulfate radicals reduced the activation energy of the potential-determining step, thus accelerating NOR.