Non-Electrode Components for Rechargeable Aqueous Zinc Batteries: Electrolytes, Solid-Electrolyte-Interphase, Current Collectors, Binders, and Separators

Dual-functional cellulose separator regulating Zn deposition for long lifespan zinc-based energy storage

Aqueous zinc-ion batteries (ZIBs) hold significant promise for next-generation energy storage due to their low cost and inherent safety, but their lifespan is limited by zinc dendrites and hydrogen evolution during the cycling. Herein, long lifespan ZIBs are achieved using a dual-functional separator with ultrathin (18 μm) and high mechanical strength (91 MPa). The abundant polar hydroxyl groups in the separator's structure repel free SO42- anions, accelerate the Zn2+ ion transport, and modify the solvation structure of Zn(H2O)62+, ensuring uniform Zn2+ ion flux and inhibiting zinc dendrite formation. Consequently, the Zn//Zn symmetrical cells with dual-functional separators exhibit superior electrochemical performance, with a cycle life exceeding 1100 h at 1 mA cm-2 and 440 h at 10 mA cm-2, 5-9 times longer than cells using glass-fiber separators. The zinc-ion hybrid supercapacitor with the functional separator achieves a high capacity retention ratio (93.1 %) after 1000 cycles at 1.0 A g-1. This work offers new insights into the development of multifunctional separator for high-performance zinc-based energy storage.

Advancing Zinc Anodes: Strategies for Enhanced Performance in Aqueous Zinc-Ion Batteries

The promising features of aqueous zinc ion batteries (AZIBs), including their inherent safety, environmental friendliness, abundant raw materials, cost-effectiveness, and simple manufacturing process, position them as strong candidates for large-scale energy storage. However, their practical application faces significant challenges, such as uncontrolled dendritic growth, undesirable side reactions, and hydrogen evolution reactions (HER), which undermine the efficiency and longevity of the system. To address these issues, extensive research has been conducted to improve these batteries' energy density and lifespan. This comprehensive review explores the fundamental mechanisms of zinc dendrite formation, its properties, and the interfacial chemistry between the electrode and electrolyte. It also delves into strategies for protecting the zinc anode, with a focus on the modulation of zinc ion deposition dynamics at the electrolyte interface. The discussion concludes with an evaluation of the current challenges and future prospects of AZIB, aiming to enhance their viability for grid-scale energy storage solutions.

Eco-friendly and strong lignin-containing microfibrillated cellulose films for high-performance separators of aqueous zinc batteries

Aqueous zinc-ion batteries have gained significant interest, offering several distinct advantages over conventional lithium-ion batteries owing to their compelling low cost, enhanced battery safety, and excellent environmental friendliness. Nevertheless, the unfortunate growth of zinc dendrites during cycling leads to poor electrochemical performance of zinc batteries, primarily attributed to the diminished wet mechanical properties and limited electrolyte uptake of existing commercial separators. Herein, a bio-based separator was developed from sustainable resources using natural polymers derived from wood pulp to replace fossil-based polyolefin separators. The inherent hydrophilicity and swelling ability of cellulose fibers provide separators with superior electrolyte wettability and uptake. Notably, the structural reinforcement provided by lignin, especially after hot pressing, enhances the separator's wet mechanical integrity and performance during battery cycling. These improvements contribute to the separator's more stable electrochemical performance and improved ion transport properties. Separators composed of lignin-rich microfibrillated cellulose fibers showed superior dimensional stability under heat compared to Celgard, ensuring higher thermal safety and enhanced performance of aqueous zinc-ion batteries. Our results reveal the great potential of lignin-rich cellulose-based separators for future zinc-ion batteries.

Anti-dendrite separator interlayer enabling staged zinc deposition for enhanced cycling stability of aqueous zinc batteries

Aqueous zinc ion batteries exhibit great prospects due to their low cost and high safety, while their lifespan is limited by severe dendritic growth problems. Herein, we develop an anti-dendrite hot-pressing separator interlayer through a mass-producible hot-pressing strategy, by spreading metal-organic framework (MOF) precursor on nonwoven matrix followed by a simple hot-pressing process. The in situ modification of MOF crystals on fiber surface processes abundant nitrogenous functional groups and high specific surface area (190.8 m2 g-1) with a strong attraction to Zn2+. These features contribute to a staged deposition behavior to promote uniform nucleation at high concentrations and two-dimensional grain growth at low concentrations. Consequently, Zn | |Zn symmetrical cells with hot-pressing separator interlayer demonstrate cycle lives of 3000 hours at 2 mA cm-2, 2 mAh cm-2. Moreover, Zn | |I2 pouch batteries with hot-pressing separator interlayer realizes 840 cycles lifespan with a capacity retention of 90.9% and a final discharge capacity of 110.6 mAh at 25 °C.

Novel in situ SEI fabrication on Zn anodes for ultra-high current density tolerance enabled by electrical excitation–conjugation of iminoacetonitriles

Electroplating enriched IDAN on zinc surface, forming IDA to complex with Zn2+, thus creating an in situ SEI. This SEI optimized Zn2+ transport, shielded water molecules, and stabilized the anode interface, enhancing long-term performance.

Fully Printed and Sweat-Activated Micro-Batteries with Lattice-Match Zn/MoS2 Anode for Long-Duration Wearables

Aqueous zinc-ion batteries with superior operational safety have great promise to serve as wearable energy storage devices. However, the poor cycling stability and low output voltage limited their practical applications. Here, fully printable Zn/MoS2-MnO2 micro-batteries are developed and demonstrated significantly enhanced cycling stability with sweat activation. 2D MoS2 is utilized to enable lattice-matching with Zn powders to realize printed Zn anodes with desirable stability and promote electron/ion transfer. Interestingly, the mild acid epidermal sweat also contributed to eliminating the MnO2 cathode by-products and compensating for the hydrogel electrolytes' water loss. The Zn/MoS2-MnO2 micro-batteries achieve a high specific capacity of 318.9 µAh cm-2 at the current density of 0.16 mA cm-2, and an energy density of 424.6 µWh cm-2, with remarkable cycle stability of ≈90% after 250 cycles. In-battery electrochromic display of capacity level and feasible electronics charging are demonstrated. The as-printed micro-batteries with innovative sweat activation would inspire the advances of sustainable power supply for wearables.

Dual-Functional Interfacial Layer Enabled by Gating-Shielding Effects for Ultra-Stable Zn Anode

Large-scale application of low-cost, high-safety and environment-compatible aqueous Zn metal batteries (ZMBs) is hindered by Zn dendrite failure and side reactions. Herein, highly reversible ZMBs are obtained by addition of trace D-pantothenate calcium additives to engineer a dual-functional interfacial layer, which is enabled by a bioinspired gating effect for excluding competitive free water near Zn surface due to the trapping and immobilization of water by hydroxyl groups, and guiding target Zn2+ transport across interface through carboxyl groups of pantothenate anions, as well as a dynamic electrostatic shielding effect around Zn protuberances from Ca2+ cations to ensure uniform Zn2+ deposition. In consequence, interfacial side reactions are perfectly inhibited owing to reduced water molecules reaching Zn surface, and the uniform and compact deposition of Zn2+ is achieved due to promoted Zn2+ transport and deposition kinetics. The ultra-stable symmetric cells with beyond 9000 h at 0.5 mA cm-2 with 0.5 mAh cm-2 and over 5000 h at 5 mA cm-2 with 1 mAh cm-2, and an average Coulombic efficiency of 99.8% at 1 mA cm-2 with 1 mAh cm-2, are amazingly realized. The regulated-electrolyte demonstrates high compatibility with verified cathodes for stable full cells. This work opens a brand-new pathway to regulate Zn/electrolyte interface to promise reversible ZMBs.

An Ionic Liquid Supramolecular Gel Electrolyte with Unique Wide Operating Temperature Range Properties for Zinc-Ion Batteries

Zinc-ion batteries are promising candidates for large-scale energy storage. The side reactions of the hydrogen evolution reaction (HER) and zinc dendrite growth are major challenges for developing high-performance zinc-ion batteries. In this paper, a supramolecular gel electrolyte (BLO-ILZE) was self-assembled in an ionic liquid (EMIMBF4) with zinc tetrafluoroborate (Zn(BF4)2) on the separator in situ to obtain a gel electrolyte used in zinc-ion batteries. BLO-ILZE is demonstrated to significantly enhance conductivity over a broad temperature range between -70 and 100 °C. Interestingly, through testing and fitting, it is found that the supramolecular gel electrolyte satisfies the liquid state law over a wide temperature range, and even achieves high conductivity (2.12 mS cm-1) at -40 °C. It is equivalent to the conductivity of aqueous zinc-ion batteries (ZnSO4/H2O) at -10 °C, which is 2.33 mS cm-1. Moreover, the supramolecular gel electrolyte can effectively inhibit the HER, thus exhibiting a longer lifetime in Zn/Zn cells for 3470 h at 1 mA cm-2 compared to the aqueous zinc-ion batteries with the Zn(BF4)2 aqueous electrolyte (400 h at 1 mA cm-2). The assembled V2O5/BLO-ILZE/Zn full cells also showed cycling performance, with 5000 cycles at 0.5 mA g-1 at room temperature, a capacity of 98%, and a coulombic efficiency of about 100%.

Advances of LiCoO2 in Cathode of Aqueous Lithium-Ion Batteries

Aqueous lithium-ion batteries offer promising advantages such as low cost, enhanced safety, high rate capability, and the ability to deliver considerable capacity at 1.8 V, making them ideal candidates for large-scale reserve power sources for renewable energy. However, the practical application of aqueous lithium-ion batteries has been hindered by the poor cycle stability of layered cathode materials, including LiCoO2, in neutral aqueous electrolytes. This review examines the working principles, material limitations, and research progress of aqueous lithium-ion batteries. The types and characteristics of materials used in the cathode of aqueous lithium-ion batteries are summarized, with a primary focus on the attenuation mechanisms of LiCoO2 when used as the cathode material in aqueous electrolytes. Furthermore, this review explores the advancements in utilizing LiCoO2 in the cathode of aqueous lithium-ion batteries, as well as the combination with machine learning. By addressing these critical aspects, this review aims to provide a comprehensive understanding of aqueous lithium-ion batteries and shed light on future development and application prospects.

Zn-based batteries for sustainable energy storage: strategies and mechanisms

Batteries play a pivotal role in various electrochemical energy storage systems, functioning as essential components to enhance energy utilization efficiency and expedite the realization of energy and environmental sustainability. Zn-based batteries have attracted increasing attention as a promising alternative to lithium-ion batteries owing to their cost effectiveness, enhanced intrinsic safety, and favorable electrochemical performance. In this context, substantial endeavors have been dedicated to crafting and advancing high-performance Zn-based batteries. However, some challenges, including limited discharging capacity, low operating voltage, low energy density, short cycle life, and complicated energy storage mechanism, need to be addressed in order to render large-scale practical applications. In this review, we comprehensively present recent advances in designing high-performance Zn-based batteries and in elucidating energy storage mechanisms. First, various redox mechanisms in Zn-based batteries are systematically summarized, including insertion-type, conversion-type, coordination-type, and catalysis-type mechanisms. Subsequently, the design strategies aiming at enhancing the electrochemical performance of Zn-based batteries are underscored, focusing on several aspects, including output voltage, capacity, energy density, and cycle life. Finally, challenges and future prospects of Zn-based batteries are discussed.

Achieving Long Cycle Life of Zn-Ion Batteries through Three-Dimensional Copper Foam

Metallic zinc anodes in aqueous zinc-ion batteries (ZIBs) suffer from dendritic growth, low Coulombic efficiency, and high polarization during cycling. To mitigate these challenges, current collectors based on three-dimensional (3D) commercial copper foam (CCuF) are generally preferred. However, their utilization is constrained by their thickness, low electroactive surface area, and increased manufacturing expenses. In this study, the synthesis of cost-effective current collectors with exceptionally large surface areas designed for ZIBs that can be cycled hundreds of times is reported. A zinc-coated CuF anode (Zn/CuF) was prepared with a 3D porous CuF current collector produced by the dynamic hydrogen bubble template (DHBT) method. Electrochemically generated copper foam could be obtained within seconds while offering a thickness as low as 30-40 μm (CuF5 achieved a thickness of ∼38 μm in 5 s) via the DHBT method. The excellent electrical conductivity and open pore structure of the 3D porous copper scaffold ensured the uniform deposition/stripping of Zn during cycling. During the 500 h Zn deposition/stripping process, the as-synthesized CuF5 current collector offered fast electrochemical kinetics and low polarization as well as a relatively high average Coulombic efficiency of 99% (at a current density of 5 mA cm-2 and a capacity of 1 mAh cm-2). Furthermore, the symmetric cell exhibited low voltage polarization and a stable voltage profile for 1000 h at a current density of 0.1 mA cm-2. In addition, full cells containing the Zn/CuF anode coupled with an as-synthesized α-MnO2 nanoneedle cathode in aqueous electrolyte were also prepared. Capacities of 266 mAh g-1 at 0.1 A g-1 and 94 mAh g-1 at 2 A g-1 were achieved after 200 charge/discharge cycles with a stable Coulombic efficiency value close to 99.9%.

Long-Life Zn Anode Enabled with Complexing Ability of a Benign Electrolyte Additive

The development of aqueous zinc ion batteries (AZIBs) is hindered by several problems, including Zn dendrite/corrosion, side reactions, and hydrogen evolution reaction (HER). Herein, trisodium citrate (NaCit) additive is introduced into the ZnSO4 electrolyte to guide the preferred Zn(002) crystal plane growth, while the Cit- is preferentially adsorbed on the active sites to suppress the HER and Zn corrosion, thus achieving uniform Zn deposition without dendrites. The stable cycle life can reach 2000 h at 0.25 mA cm-2/0.05 mAh cm-2. The density functional theory simulations further indicate that the parallely placed Cit- has the lowest adsorption energy (-6.617 eV); it can form a weak interaction with Zn metal to promote the growth of (002) crystal planes. Furthermore, the assembled Zn//polyaniline full cell and pouch cell both exhibit good rate performance and long cycling stability. The complexation and dissolubilization effects of the NaCit additive provide a means for designing high-performance AZIBs.

Recent development of manganese dioxide-based materials as zinc-ion battery cathode

The development of advanced cathode materials for zinc-ion batteries (ZIBs) is a critical step in building large-scale green energy conversion and storage systems in the future. Manganese dioxide is one of the most well-studied cathode materials for zinc-ion batteries due to its wide range of crystal forms, cost-effectiveness, and well-established synthesis processes. This review describes the recent research progress of manganese dioxide-based ZIBs, and the reaction mechanism, electrochemical performance, and challenges of manganese dioxide-based ZIBs materials are systematically introduced. Optimization strategies for high-performance manganese dioxide-based materials for ZIBs with different crystal forms, nanostructures, morphologies, and compositions are discussed. Finally, the current challenges and future research directions of manganese dioxide-based cathodes in ZIBs are envisaged.

Electrolyte Additives for Stable Zn Anodes

Zn-ion batteries are regarded as the most promising batteries for next-generation, large-scale energy storage because of their low cost, high safety, and eco-friendly nature. The use of aqueous electrolytes results in poor reversibility and leads to many challenges related to the Zn anode. Electrolyte additives can effectively address many such challenges, including dendrite growth and corrosion. This review provides a comprehensive introduction to the major challenges in and current strategies used for Zn anode protection. In particular, an in-depth and fundamental understanding is provided of the various functions of electrolyte additives, including electrostatic shielding, adsorption, in situ solid electrolyte interphase formation, enhancing water stability, and surface texture regulation. Potential future research directions for electrolyte additives used in aqueous Zn-ion batteries are also discussed.

Challenges and Advances in Rechargeable Batteries for Extreme-Condition Applications

Rechargeable batteries are widely used as power sources for portable electronics, electric vehicles and smart grids. Their practical performances are, however, largely undermined under extreme conditions, such as in high-altitude drones, ocean exploration and polar expedition. These extreme environmental conditions not only bring new challenges for batteries but also incur unique battery failure mechanisms. To fill in the gap, it is of great importance to understand the battery failure mechanisms under different extreme conditions and figure out the key parameters that limit battery performances. In this review, the authors start by investigating the key challenges from the viewpoints of ionic/charge transfer, material/interface evolution and electrolyte degradation under different extreme conditions. This is followed by different engineering approaches through electrode materials design, electrolyte modification and battery component optimization to enhance practical battery performances. Finally, a short perspective is provided about the future development of rechargeable batteries under extreme conditions.

Multi-Ion Engineering Strategies toward High Performance Aqueous Zinc-Based Batteries

As alternatives to batteries with organic electrolytes, aqueous zinc-based batteries (AZBs) have been intensively studied. However, the sluggish kinetics, side reactions, structural collapse, and dissolution of the cathode severely compromise the commercialization of AZBs. Among various strategies to accelerate their practical applications, multi-ion engineering shows great feasibility to maintain the original structure of the cathode and provide sufficient energy density for high-performance AZBs. Though multi-ion engineering strategies could solve most of the problems encountered by AZBs and show great potential in achieving practical AZBs, the comprehensive summaries of the batteries undergo electrochemical reactions involving more than one charge carrier is still in deficiency. The ambiguous nomenclature and classification are becoming the fountainhead of confusion and chaos. In this circumstance, this review overviews all the battery configurations and the corresponding reaction mechanisms are investigated in the multi-ion engineering of aqueous zinc-based batteries. By combing through all the reported works, this is the first to nomenclate the different configurations according to the reaction mechanisms of the additional ions, laying the foundation for future unified discussions. The performance enhancement, fundamental challenges, and future developing direction of multi-ion strategies are accordingly proposed, aiming to further accelerate the pace to achieve the commercialization of AZBs with high performance.

Recent Progress of the Cathode Material Design for Aqueous Zn-Organic Batteries

Aqueous zinc-ion batteries (ZIBs) have emerged as the most promising candidate for large-scale energy storage due to their inherent safety, environmental friendliness, and cost-effectiveness. Simultaneously, the utilization of organic electrode materials with renewable resources, environmental compatibility, and diverse structures has sparked a surge in research and development of aqueous Zn-organic batteries (ZOBs). A comprehensive review is warranted to systematically present recent advancements in design principles, synthesis techniques, energy storage mechanisms, and zinc-ion storage performance of organic cathodes. In this review article, we comprehensively summarize the energy storage mechanisms employed by aqueous ZOBs. Subsequently, we categorize organic cathode materials into small-molecule compounds and high-molecular polymers respectively. Novel polymer materials such as conjugated polymers (CPs), conjugated microporous polymers (CMPs), and covalent organic frameworks (COFs) are highlighted with an overview of molecular design strategies and structural optimization based on organic cathode materials aimed at enhancing the performance of aqueous ZOBs. Finally, we discuss the challenges faced by aqueous ZOBs along with future prospects to offer insights into their practical applications.

Recent advances in electrospinning nanofiber materials for aqueous zinc ion batteries

Aqueous zinc ion batteries (AZIBs) are regarded as one of the most promising large-scale energy storage systems because of their considerable energy density and intrinsic safety. Nonetheless, the severe dendrite growth of the Zn anode, the serious degradation of the cathode, and the boundedness of separators restrict the application of AZIBs. Fortunately, electrospinning nanofibers demonstrate huge potential and bright prospects in constructing AZIBs with excellent electrochemical performance due to their controllable nanostructure, high conductivity, and large specific surface area (SSA). In this review, we first briefly introduce the principles and processing of the electrospinning technique and the structure design of electrospun fibers in AZIBs. Then, we summarize the recent advances of electrospinning nanofibers in AZIBs, including the cathodes, anodes, and separators, highlighting the nanofibers' working mechanism and the correlations between electrode structure and performance. Finally, based on insightful understanding, the prospects of electrospun fibers for high-performance AZIBs are also presented.

Polyvinylpyrrolidone-Intercalated Mn0.07 VOx toward High Rate and Long-Life Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) are expected to be an attractive alternative in advanced energy storage devices due to large abundance and dependable security. Nevertheless, the undesirable energy density and operating voltage still hinder the development of AZIBs, which is intimately associated with the fundamental properties of the cathode. In this work, polyvinylpyrrolidone (PVP) intercalated Mn0.07 VOx (PVP-MnVO) with a large interlayer spacing of 13.5 Å (against 12.5 Å for MnVO) synthesized by a facile hydrothermal method is adopted for the cathode in AZIBs. The experimental results demonstrate that PVP-MnVO with expanded interlayer spacing provides beneficial channels for the rapid diffusion of Zn2+ , resulting in a high discharge capacity of 402 mAh g-1 at 0.1 A g-1 , superior to that of MnVO (275 mAh g-1 at 0.1 A g-1 ). Meanwhile, the PVP molecule remains in the layer structure as a binder/pillar, which can maintain its structural integrity well during the charging/discharging process. Consequently, PVP-MnVO cathode exhibits superior rate capability and cycling stability (89% retention after 4300 cycles at 10 A g-1 ) compared to that of MnVO (≈51% retention over 500 cycles at 2 A g-1 ). This work proposes a new approach to optimize the performance of vanadium-based electrode materials in AZIBs.

Recent Advances in Structural Optimization and Surface Modification on Current Collectors for High-Performance Zinc Anode: Principles, Strategies, and Challenges

The last several years have witnessed the prosperous development of zinc-ion batteries (ZIBs), which are considered as a promising competitor of energy storage systems thanks to their low cost and high safety. However, the reversibility and availability of this system are blighted by problems such as uncontrollable dendritic growth, hydrogen evolution, and corrosion passivation on anode side. A functionally and structurally well-designed anode current collectors (CCs) is believed as a viable solution for those problems, with a lack of summarization according to its working mechanisms. Herein, this review focuses on the challenges of zinc anode and the mechanisms of modified anode CCs, which can be divided into zincophilic modification, structural design, and steering the preferred crystal facet orientation. The possible prospects and directions on zinc anode research and design are proposed at the end to hopefully promote the practical application of ZIBs.

Anomalous Inferior Zn Anode in High-Concentration Electrolyte: Leveraging Solid-Electrolyte-Interface for Stabilized Cycling of Aqueous Zn-Metal Batteries

Aqueous Zn-metal batteries (AZMBs) are promising large-scale energy storage devices for their high safety and theoretical capacity. However, unstable Zn-electrolyte interface and severe side reactions have excluded AZMBs from long cycling required by practically reversible energy storage. Traditional high-concentration electrolyte is an effective strategy to suppress dendrites growth and resolve the poor electrochemical stability and reversibility of Zn-metal anodes, yet how scientifically universal such strategy is for hybrid electrolyte of different concentrations remains unclear. Herein, we studied the electrochemical behaviors of AZMBs comprising a ZnCl2 -based DMSO/H2 O electrolyte of two distinct concentrations (1 m vs. 7 m). The electrochemical stability/reversibility of Zn anodes in both symmetric and asymmetric cells with high-concentration electrolytes are unusually inferior to the ones with low-concentration electrolyte. It was found that more DMSO components in the solvation sheath of low-concentration electrolyte exist at the Zn-electrolyte interface than in high-concentration counterpart, enabling higher organic compositions in solid-electrolyte-interface (SEI). The rigid inorganic and flexible organic compositions of SEI decomposed from the low-concentration electrolyte is accounted for improved cycling and reversibility of Zn metal anodes and the respective batteries. This work reveals the critical role of SEI than the high concentration itself in delivering stable electrochemical cycling in AZMBs.

Suppression of Vanadium Oxide Dissolution via Cation Metathesis within a Coordination Supramolecular Network for Durable Aqueous Zn-V2 O5 Batteries

Aqueous zinc metal batteries (ZMBs) are a promising sustainable technology for large-scale energy storage applications. However, the water is often associated with problematic parasitic reactions on both anode and cathode, leading to the low durability and reliability of ZMBs. Here, a multifunctional separator for the Zn-V2 O5 batteries by growing the coordination supramolecular network (CSN:Zn-MBA, MBA = 2-mercaptobenzoic acid) on the conventional non-woven fabrics (NWF) is developed. CSN tends to form a stronger coordination bond as a softer cation, enabling a thermodynamically preferred Zn2+ to VO2 + substitution in the network, leading to the formation of VO2 -MBA interface, that strongly obstructs the VO2 (OH)2 - penetration but simultaneously allows Zn2+ transfer. Moreover, Zn-MBA molecules can adsorb the OTF- and distribute the interfacial Zn2+ homogeneous, which facilitate a dendrite-free Zn deposition. The Zn-V2 O5 cells with Zn-MBA@NWF separator realize high capacity of 567 mAh g-1 at 0.2 A g-1 , and excellent cyclability over 2000 cycles with capacity retention of 82.2% at 5 A g-1 . This work combines the original advantages of the template and new function of metals via cation metathesis within a CSN, provides a new strategy for inhibiting vanadium oxide dissolution.

Improved Strategies for Separators in Zinc-Ion Batteries

The demand for energy storage is growing, and the disadvantages of lithium-ion batteries are being explored to overcome them. Accordingly, aqueous zinc-ion batteries (ZIBs) are developing very rapidly, owing to their high safety, environmental friendliness, high abundance of resources, and high cost performance. Over the last decade, ZIBs have made remarkable progress through extensive efforts in the field of electrode materials and through fundamental understanding of non-electrode components, such as solid-electrolyte interphase, electrolytes, separators, binders, and current collectors. In particular, the breakthrough in using separators on non-electrode elements should not be overlooked as such separators have proven key to conferring ZIBs with high energy and power density. In this Review, recent progress in the development of separators in ZIBs is comprehensively summarized based on their functions and roles in ZIBs, including the modification of conventional separators and the development of novel separators. Finally, the prospects and future challenges of separators are also discussed to facilitate ZIBs development.

Rational Design of Electrode-Electrolyte Interphase and Electrolytes for Rechargeable Proton Batteries

Rechargeable proton batteries have been regarded as a promising technology for next-generation energy storage devices, due to the smallest size, lightest weight, ultrafast diffusion kinetics and negligible cost of proton as charge carriers. Nevertheless, a proton battery possessing both high energy and power density is yet achieved. In addition, poor cycling stability is another major challenge making the lifespan of proton batteries unsatisfactory. These issues have motivated extensive research into electrode materials. Nonetheless, the design of electrode-electrolyte interphase and electrolytes is underdeveloped for solving the challenges. In this review, we summarize the development of interphase and electrolytes for proton batteries and elaborate on their importance in enhancing the energy density, power density and battery lifespan. The fundamental understanding of interphase is reviewed with respect to the desolvation process, interfacial reaction kinetics, solvent-electrode interactions, and analysis techniques. We categorize the currently used electrolytes according to their physicochemical properties and analyze their electrochemical potential window, solvent (e.g., water) activities, ionic conductivity, thermal stability, and safety. Finally, we offer our views on the challenges and opportunities toward the future research for both interphase and electrolytes for achieving high-performance proton batteries for energy storage.

Enhanced H+ Storage of a MnO2 Cathode via a MnO2 Nanolayer Interphase Transformed from Manganese Phosphate

The MnO₂ cathode has attracted extensive attention in aqueous zinc ion battery research due to its environmental benignity, low cost, and high capacity. However, sluggish kinetics of hydrated zinc ion and manganese dissolution lead to insufficient rate and cycle performances. In this study, a manganese phosphate nanolayer synthesized in situ on a MnO₂ cathode can be transformed into a δ-MnO₂ nanolayer interphase after activation upon cycling, endowing the interphase with abundant interlayer water. As a result, the δ-MnO₂ nanolayer interphase with the function of H⁺ topochemistry significantly enhances H⁺ (de)insertion in the MnO₂ cathode, which leads to a kinetics conversion from Zn²⁺-dominated (de)insertion to H⁺-dominated (de)insertion, thus endowing the MnO₂ cathode with superior rate and cycle performances (85.9% capacity retention after 1000 cycles at 10 A g^-1). This strategy can be highly scalable for other manganese-based cathodes and provides an insight for developing high-performance aqueous zinc ion batteries.

A Two-Dimensional Porphyrin Coordination Supramolecular Network Cathode for High-Performance Aqueous Dual-Ion Battery

Iodine has great potential in the energy storage, but high solubility of I₃ ^- has seriously delayed its promotion. Benefited from abundant active sites and the open channel, two-dimensional coordination supramolecular networks (2D CSNs) is considered to be a candidate for the energy storage. Herein, a 2D porphyrin-CSN cathode named Zn-TCPP for aqueous iodine dual-ion battery (DIB) shows an excellent specific capacity of 278 mAh g^-1 , and a high energy density of 340 Wh kg^-1 at 5 A g^-1 , as well as a durable cycle performance of 5000 cycles and a high Coulombic efficiency of 98 %. Molecular orbital theory, UV/VIS, Raman spectroscopy and density functional theory (DFT) calculations reveal charge-transfer interaction between the donor of porphyrin nitrogen and the acceptor of I₃ ^- , and computational fluid dynamics (CFD) simulations demonstrate the contribution of 2D layered network structure of Zn-TCPP to the penetration of I₃ ^- .

Vanadium Oxide-Based Cathode Materials for Aqueous Zinc-Ion Batteries: Energy Storage Mechanism and Design Strategy

Aqueous zinc ion batteries (AZIBs) are an ideal choice for a new generation of large energy storage devices because of their high safety and low cost. Vanadium oxide-based materials have attracted great attention in the field of AZIB cathode materials due to their high theoretical capacity resulting from their rich oxidation states. However, the serious structural collapse and low intrinsic conductivity of vanadium oxide-based materials cause rapid capacity fading, which hinders their further applications in AZIB cathode materials. Here, the structural characteristics and energy storage mechanisms of vanadium oxide-based materials are reviewed, and the optimization strategies of vanadium oxide-based cathode materials are summarized, including substitutional doping, vacancy engineering, interlayer engineering, and structural composite. Finally, the future research and development direction of vanadium oxide-based AZIBs are prospected in terms of cathode, anode, electrolyte, non-electrode components, and recovery technology.

Stabilizing Interface pH by Mixing Electrolytes for High-Performance Aqueous Zn Metal Batteries

Aqueous zinc metal batteries with mild acidic electrolytes are considered promising candidates for large-scale energy storage. However, the Zn anode suffers from severe Zn dendrite growth and side reactions due to the unstable interfacial pH and the absence of a solid electrolyte interphase (SEI) protective layer. Herein, a novel and simple mixed electrolyte strategy is proposed to address these problems. The mixed electrolytes of 2 M ZnSO₄ and 2 M Zn (CF₃ SO₃ )₂ can efficiently buffer the interfacial pH and induce the in situ formation of the organic-inorganic SEI layer, which eliminates dendrite growth and prevents side reactions. As a result, Zn anodes in mixed electrolyte exhibit a lifespan enhancement over 400 times, endure stable cycling over 270 h at a high DOD of 62% and achieve high Zn plating/stripping reversibility with an average CE of 99.5% for 1000 cycles at 1 mA cm^-2 . The findings pave the way for developing practical electrolyte systems for Zn batteries.

In situ growing 3D-Cu coating to improve the reversibility and reaction kinetics of Zn metal anodes

The zinc metal anode is the most promising metal anode material in aqueous battery systems due to its low cost and high theoretical capacity. However, it still undergoes irreversible reactions such as premature failure of the dendrites/dead Zn during Zn stripping/plating, resulting in the inferior cycling stability of the Zn-based full cell. Here, we demonstrate a facile 3D-Cu alloy coating to improve Zn reversibility by providing spatial voids to accommodate the plated Zn to form dendrite-free morphology. Combining the larger 3D surface and the alloying–dealloying process, the Zn anode reactions exhibit enhanced reaction kinetics to meet large operating current densities. The 3D-Cu-coated Zn anode can deliver improved cycling stability for 350 h under a large areal capacity of 3 mAh cm⁻². It also enables MnO₂–Zn at the full cell level to achieve a specific capacity of 205 mAh g⁻¹ and longer cycling for 350 cycles with 87.4% retention of the initial capacity. This research provides a new pathway to achieve high reversible Zn metal chemistry.

Advanced Materials for Electrocatalysis and Energy Storage

Energy problems restrict the sustainable development of human society [...]