Ultrathin Covalent Organic Framework Membranes Prepared by Rapid Electrophoretic Deposition

Ultrafast Interfacial Self-Assembly toward Bioderived Polyester COF Membranes with Microstructure Optimization

The precise manipulation of the microstructure (pore size, free volume distribution, and connectivity of the free-volume elements), thickness, and mechanical characteristics of membranes holds paramount significance in facilitating the effective utilization of self-standing membranes. In this contribution, the synthesis of two innovative ester-linked covalent-organic framework (COF) membranes is first reported, which are generated through the selection of plant-derived ellagic acid and quercetin phenolic monomers in conjunction with terephthaloyl chloride as a building block. The optimization of the microstructure of these two COF membranes is systematically achieved through the application of three different interfacial electric field systems: electric neutrality, positive electricity, and negative electricity. It is observed that the positively charged system facilitates a record increase in the rate of membrane formation, resulting in a denser membrane with a uniform pore size and enhanced flexibility. In addition, a correlation is identified wherein an increase in the alkyl chain length of the surfactants leads to a more uniform pore size and a decrease in the molecular weight cutoff of the COF membrane. The resulting COF membrane exhibits an unprecedented combination of high water permeance, superior sieving capability, robust mechanical strength, chemical robustness for promising membrane-based separation science and technology.

Synthetic Strategies to Extended Aromatic Covalent Organic Frameworks

π-Conjugated materials are highly attractive owing to their unique optical and electronic properties. Covalent organic frameworks (COFs) offer a great opportunity for precise arrangement of building units in a π-conjugated crystalline matrix and tuning of the properties through choice of functionalities or post-synthetic modification. With this review, we aim at summarizing both the most representative as well as emerging strategies for the synthesis of π-conjugated COFs. We give examples of direct synthesis using large, π-extended building blocks. COFs featuring fully conjugated linkages such as vinylene, pyrazine, and azole are discussed. Then, post-synthetic modification methods that result in the extension of the COF π-system are reviewed. Throughout, mechanistic insights are presented when available. In the context of their utilization as film devices, we conduct a concise survey of the prominent COF layer deposition techniques reported and their aptness for the deposition of fused aromatic systems.

Bioinspired 2D nanofluidic membranes for energy applications

Bioinspired two-dimensional (2D) nanofluidic membranes have been explored for the creation of high-performance ion transport systems that can mimic the delicate transport functions of living organisms. Advanced energy devices made from these membranes show excellent energy storage and conversion capabilities. Further research and development in this area are essential to unlock the full potential of energy devices and facilitate the development of high-performance equipment toward real-world applications and a sustainable future. However, there has been minimal review and summarization of 2D nanofluidic membranes in recent years. Thus, it is necessary to carry out an extensive review to provide a survey library for researchers in related fields. In this review, the classification and the raw materials that are used to construct 2D nanofluidic membranes are first presented. Second, the top-down and bottom-up methods for constructing 2D membranes are introduced. Next, the applications of bioinspired 2D membranes in osmotic energy, hydraulic energy, mechanical energy, photoelectric conversion, lithium batteries, and flow batteries are discussed in detail. Finally, the opportunities and challenges that 2D nanofluidic membranes are likely to face in the future are envisioned. This review aims to provide a broad knowledge base for constructing high-performance bioinspired 2D nanofluidic membranes for advanced energy applications.

Covalent Organic Framework Membranes and Water Treatment

Covalent organic frameworks (COFs) are an emerging class of highly porous crystalline organic polymers comprised entirely of organic linkers connected by strong covalent bonds. Due to their excellent physicochemical properties (e.g., ordered structure, porosity, and stability), COFs are considered ideal materials for developing state-of-the-art separation membranes. In fact, significant advances have been made in the last six years regarding the fabrication and functionalization of COF membranes. In particular, COFs have been utilized to obtain thin-film, composite, and mixed matrix membranes that could achieve effective rejection (mostly above 80%) of organic dyes and model organic foulants (e.g., humic acid). COF-based membranes, especially those prepared by embedding into polyamide thin-films, obtained adequate rejection of salts in desalination applications. However, the claims of ordered structure and separation mechanisms remain unclear and debatable. In this perspective, we analyze critically the design and exploitation of COFs for membrane fabrication and their performance in water treatment applications. In addition, technological challenges associated with COF properties, fabrication methods, and treatment efficacy are highlighted to redirect future research efforts in realizing highly selective separation membranes for scale-up and industrial applications.

Ultra-fast supercritically solvothermal polymerization for large single-crystalline covalent organic frameworks

Crystalline polymer materials, e.g., hyper-crosslinked polystyrene, conjugate microporous polymers and covalent organic frameworks, are used as catalyst carriers, organic electronic devices and molecular sieves. Their properties and applications are highly dependent on their crystallinity. An efficient polymerization strategy for the rapid preparation of highly or single-crystalline materials is beneficial not only to structure-property studies but also to practical applications. However, polymerization usually leads to the formation of amorphous or poorly crystalline products with small grain sizes. It has been a challenging task to efficiently and precisely assemble organic molecules into a single crystal through polymerization. To address this issue, we developed a supercritically solvothermal method that uses supercritical carbon dioxide (sc-CO2) as the reaction medium for polymerization. Sc-CO2 accelerates crystal growth due to its high diffusivity and low viscosity compared with traditional organic solvents. Six covalent organic frameworks with different topologies, linkages and crystal structures are synthesized by this method. The as-synthesized products feature polarized photoluminescence and second-harmonic generation, indicating their high-quality single-crystal nature. This method holds advantages such as rapid growth rate, high productivity, easy accessibility, industrial compatibility and environmental friendliness. In this protocol, we provide a step-by-step procedure including preparation of monomer dispersion, polymerization in sc-CO2, purification and characterization of the single crystals. By following this protocol, it takes 1-5 min to grow sub-mm-sized single crystals by polymerization. The procedure takes ~4 h from preparation of monomer dispersion and polymerization in sc-CO2 to purification and drying of the product.

Electrophoretic Deposition of Single Nanoparticles

The controlled assembly of colloid particles on a solid substrate has always been a major challenge in colloid and surface science. Here we provide an overview of electrophoretic deposition (EPD) of single charge-stabilized nanoparticles. We demonstrate that surface templated EPD (STEPD) assembly, which combines EPD with top-down nanofabrication, allows a wide range of nanoparticles to be built up into arbitrary structures with high speed, scalability, and excellent fidelity. We will also discuss some of the current colloid chemical limitations and challenges in STEPD assembly for sub-10 nm nanoparticles and for the fabrication of densely packed single particle arrays.

Colloidal 2D Covalent Organic Framework-Tailored Nanofiltration Membranes for Precise Molecular Sieving

Covalent organic frameworks (COFs) with tunable pore sizes and ordered structures are ideal materials for engineering nanofiltration (NF) membranes. However, most of the COFs prepared by solvothermal synthesis are unprocessable powders and fail to form well-structured membranes, which seriously hinders the development of COF NF membranes. Herein, colloidal 2D-COFs with processable membrane formation ability were synthesized by oil-in-water emulsion interfacial polymerization technology. COF NF membranes with tailored thickness and surface charge were fabricated via a layer-by-layer (LBL) assembly strategy. The prepared COF NF membrane achieved precise sieving of dye molecules with high permeance (85 L·m-2·h-1·bar-1). In this work, the strategy of prepared COF NF membranes based on colloid 2D-COF LBL assembly is proposed for the first time, which provides a new idea for the on-demand design and preparation of COF membranes for precise molecular sieving.

Mixed-Dimensional van der Waals Heterostructures for Boosting Electricity Generation

The emerging technology of harvesting environmental energy using hydrovoltaic devices enriches the conversion forms of renewable energy. It provides more concepts for power supply in micro/nano systems, and hydrovoltaic technology with high performance, usability, and integration is essential for achieving sustainable green energy. Comparing the discovery of multiscale nanomaterials, working layers with innovative microstructures have gradually become the dominant trend in the construction of graphene-based hydrovoltaic devices. However, reports on promoting ion/electron redistribution at the solid-liquid interface through the substrate effect of graphene are accompanied by tedious procedures, nondiverse substrates, and monolithic regulation of enhancement mechanisms. Here, the electrophoretic deposition (EPD)-driven SiC whiskers (SiCw)-assisted graphene transfer process is adopted to alleviate the complexity of the device fabrication caused by graphene transfer. The resulting output performance of the graphene/SiCw (GS) mesh films is significantly boosted. The high integrity of graphene and prominent negative surface charge near the graphene-droplet interface are derived from the overlayer and underlayer inside the graphene-based mixed-dimensional van der Waals (vdW) heterostructures, respectively. Additionally, a self-powered desalination-monitoring system is designed based on integrated hydrovoltaic devices. Electricity harvested from the ionic solutions is reused for deionization, representing an efficient strategy for energy conversion and utilization.

3D covalent organic framework membrane with fast and selective ion transport

3D ionic covalent organic framework (COF) membranes, which are envisioned to be able to break the trade-off between ion conductivity and ion selectivity, are waiting for exploitation. Herein, we report the fabrication of a 3D sulfonic acid-functionalized COF membrane (3D SCOF) for efficient and selective ion transport, using dual acid-mediated interfacial polymerization strategy. The 3D SCOF membranes possess highly interconnected ion transport channels, ultramicroporous pore sizes (0.97 nm), and abundant sulfonate groups (with a high ion exchange capacity of 4.1 mmol g-1), leading to high proton conductivity of 843 mS cm-1 at 90 °C. When utilized in osmotic energy conversion, a high power density of 21.2 W m-2, and a remarkable selectivity of 0.976 and thus an exceptional energy conversion efficiency of 45.3% are simultaneously achieved. This work provides an alternative approach to 3D ionic COF membranes and promotes the applications of 3D COFs in ion transport and separation.

Electrochemical Interfacial Polymerization toward Ultrathin COF Membranes for Brine Desalination

Ultrathin covalent organic framework (COF) membranes are urgently demanded in molecular/ionic separations. Herein, we reported an electrochemical interfacial polymerization strategy to fabricate ultrathin COF membranes with thickness of 85 nm, by actively manipulate self-healing effect and self-inhibiting effect. The resulting COF membrane exhibited superior performance in brine desalination with the permeation flux of 92 kg m^-2  h^-1 and the rejection of 99.96 %. Our electrochemical interfacial polymerization strategy enriches the fabrication approach of COF membranes and facilitates the rational design of ultrathin membranes.

Ultra-Fast Preparation of Large-Area Graphdiyne-Based Membranes via Alkynylated Surface-Modification for Nanofiltration

Graphdiynes (GDYs), two-dimensional graphene-like carbon systems, are considered as potential advanced membrane material due to their unique physicochemical features. Nevertheless, the scale-up of integrated GDY membranes is technologically challenging, and most studies remain at the theoretical stage. Herein, we report a simple and efficient alkynylated surface-mediated strategy to prepare hydrogen-substituted graphdiyne (HsGDY) membranes on commercial alumina tubes. Surface alkynylation initiates an accelerated surface-confined coupling reaction in the presence of a copper catalyst and facilitates the nanoscale epitaxial lateral growth of HsGDY. A continuous and ultra-thin HsGDY membrane (∼100 nm) can be produced within 15 min. The resulting membranes exhibit outstanding molecular sieving together with excellent water permeances (ca. 1100 L m^-2  h^-1 MPa^-1 ), and show a long-term durability in cross-flow nanofiltration, owing to the superhydrophilic surface and hydrophobic pore walls.