Simultaneously Stabilizing Both Electrodes and Electrolytes by a Self-Separating Organometallics Interface for High-Performance Zinc-Ion Batteries at Wide Temperatures

Suppressing hydrogen evolution and promoting dendrite free zinc deposition by fluorinated triazine framework towards robust aqueous zinc ion batteries

Aqueous zinc-ion batteries (AZIBs) have become a research hotspot, but the inevitable zinc dendrites and parasitic reactions in the zinc anode seriously hinder their further development. In this study, three covalent triazine frameworks (DCPY-CTF, CTF-1 and FCTF) have been synthesized and used as artificial protective coatings, in which the fluorinated triazine framework (FCTF) increases the zinc-philic site, thus better promoting dendritic free zinc deposition and inhibiting hydrogen evolution reactions. Excitingly, both experimental results and theoretical calculations indicate that the FCTF interface adjusts the deposition of Zn2+ along the (002) plane, effectively alleviating the formation of zinc dendrites. As expected, Zn@FCTF symmetric cells exhibit cycling stability of over 4000 h (0.25 mA cm-2), meanwhile Zn@FCTF//NHVO full cells provide a high specific capacity of 280 mAh/g at 1.0 A/g, which are superior to those of bare Zn anode. This work provides new insights for suppressing hydrogen evolution and promoting dendrite-free zinc deposition to construct highly stable and reversible AZIBs.

In Situ Self-Reconfiguration Induced Multifunctional Triple-Gradient Artificial Interfacial Layer toward Long-Life Zn-Metal Anodes

Aqueous Zn-ion batteries featuring with intrinsic safety and low cost are highly desirable for large-scale energy storage, but the unstable Zn-metal anode resulting from uncontrollable dendrite growth and grievous hydrogen evolution reaction (HER) shortens their cycle life. Herein, a feasible in situ self-reconfiguration strategy is developed to generate triple-gradient poly(diallyldimethylammonium) bis(trifluoromethanesulfonyl)imide (PDDA-TFSI)-Zn5(OH)8Cl2·H2O-Sn (PT-ZHC-Sn) artificial layer. The resulting triple-gradient interface consists of the spherical top layer PT with cation confinement and H2O inhibition, the dense intermediate layer ZHC nanosheet with Zn2+ conduction and electron shielding, and the bottom layer Znophilic Sn metal. The well-designed triple-gradient artificial interfacial layer synergistically facilitates rapid Zn2+ diffusion to regulate uniform Zn deposition and accelerates the desolvation process while suppressing HER. Consequently, the PT-ZHC-Sn@Zn symmetric cell achieves an ultralong lifespan over 6500 h at 0.5 mA cm-2 for 0.5 mAh cm-2. Furthermore, a full battery coupling with MnO2 cathode exhibits a 17.2% increase in capacity retention compared with bare Zn anode after 1000 cycles. The in situ self-reconfiguration strategy is also applied to prepare triple-gradient PT-ZHC-In, and the assembled Zn//Cu cell operates steadily for over 8400 h while maintaining Coulombic efficiency of 99.6%. This work paves the way to designing multicomponent gradient interface for stable Zn-metal anodes.

Inorganic Electrolyte Additive Promoting the Interfacial Stability for Durable Zn-Ion Batteries

The development of Zn-ion batteries (ZIBs) is always hindered by the ruleless interface reactions between the solid electrode and liquid electrolyte, and seeking appropriate electrolyte additives is considered as a valid approach to stabilize the electrode/electrolyte interphases for high-performance ZIBs. Benefiting from the unique solubility of TiOSO4 in acidic solution, the composite electrolyte of 2 m ZnSO4+30 mm TiOSO4 (ZSO/TSO) is configured and its positive contribution to Zn//Zn cells, Zn//Cu cells, and Zn//NH4V4O10 batteries are comprehensively investigated by electrochemical tests and theoretical calculations. Based on the theoretical calculations, the introduction of TiOSO4 contributes to facilitating the desolvation kinetics of Zn2+ ions and guarantees the stable interface reactions of both zinc anode and NH4V4O10 cathode. As expected, Zn//Zn cells keep long-term cycling behavior for 3750 h under the test condition of 1 mA cm-2-1 mAh cm-2, Zn//Cu cells deliver high Coulombic efficiency of 99.9% for 1000 cycles under the test condition of 5 mA cm-2-1 mAh cm-2, and Zn//NH4V4O10 batteries maintain reversible specific capacity of 193.8 mAh g-1 after 1700 cycles at 5 A g-1 in ZSO/TSO electrolyte. These satisfactory results manifest that TiOSO4 additive holds great potential to improve the performances of ZIBs.

Blocking Interfacial Proton Transport via Self-Assembled Monolayer for Hydrogen Evolution-Free Zinc Batteries

Aqueous Zn-ion batteries (ZIBs) are promising next-generation energy storage devices, yet suffer from the issues of hydrogen evolution reaction (HER) and intricate side reactions on the Zn anode surface. The hydrogen (H)-bond networks play a critical role in interfacial proton transport that may closely relate to HER but are rarely investigated. Herein, we report a self-assembled monolayer (SAM) strategy which is constructed by anchoring ionic liquid cations on Ti3C2Tx substrate for HER-free Zn anode. Molecule dynamics simulations reveal that the rationally designed SAM with a high coordination number of water molecules (25-27, 4-6 for Zn2+) largely reduces the interfacial densities of H2O molecules, therefore breaking the connectivity of H-bond networks and blocking proton transport on the interface, by which the HER is suppressed. Then, a series of in situ characterizations demonstrate that negligible amounts of H2 gas are collected from the Zn@SAM-MXene anode. Consequently, the symmetric cell enables a long-cycling life of 3000 h at 1 mA cm-2 and 1000 h at 5 mA cm-2. More significantly, the stable Zn@SAM-MXene films are successfully used for coin full cells showing high-capacity retention of over 94 % after 1000 cycles and large-area (10×5 cm2) pouch cells with desired performance.

Spontaneous Molecule Aggregation for Nearly Single-Ion Conducting Sol Electrolyte to Advance Aqueous Zinc Metal Batteries: The Case of Tetraphenylporphyrin

Zn metal as a promising anode of aqueous batteries faces severe challenges from dendrite growth and side reactions. Here, tetraphenylporphyrin tetrasulfonic acid (TPPS) is explored as an electrolyte additive for advanced Zn anodes. It is interesting to note that TPPS spontaneously assembles into unique aggregates. As they adsorb on the Zn anode, the aggregates enhance the resistance to electrolyte percolation and dendrite growth compared to single molecules. Meanwhile, TPPS facilitates anion association in the solvation sheath of Zn2+, and boosts the transference number of Zn2+ up to 0.95. Therefore, anion-related side reactions and anion-induced electrode overpotentials are reduced accordingly. In this context, the electrolyte containing TPPS exhibits excellent electrochemical performance. Even under a high loading of MnO2 (25 mg cm-2), a limited Zn supply (N/P ratio=1.7), and a lean electrolyte (15 μL mAh-1), the full cells still represent a higher cumulative capacity compared to the reported data. The advantages of this electrolyte are also adapted to other cathode materials. The pouch cells of Zn||NaV3O8 ⋅ 1.5H2O realize a capacity of ~0.35 Ah at 0.4 C under harsh conditions.

Self-Adaptive Liquid Film: Dynamic Realization of Dendrite-Free Zn Deposition Toward Ultralong-Life Aqueous Zn Battery

The poor reversibility and stability of Zn metal anode (ZMA) caused by uncontrolled Zn deposition behaviors and serious side reactions severely impeded the practical application of aqueous Zn metal battery. Herein, a liquid-dynamic and self-adaptive protective layer (LSPL) was constructed on the ZMA surface for inhibiting dendrites and by-products formation. Interestingly, the outer LSPL consists of liquid perfluoropolyether (PFPE), which can dynamically adapt volume change during repeat cycling and inhibit side reactions. Moreover, it can also decrease the de-solvation energy barrier of Zn2+ by strong interaction between C-F bond and foreign Zn2+ , improving Zn2+ transport kinetics. For the LSPL inner region, in-situ formed ZnF2 through the spontaneous chemical reaction between metallic Zn and part PFPE can establish an unimpeded Zn2+ migration pathway for accelerating ion transfer, thereby restricting Zn dendrites formation. Consequently, the LSPL-modified ZMA enables reversible Zn deposition/dissolution up to 2000 h at 1 mA cm-2 and high coulombic efficiency of 99.8% at 4 mA cm-2 . Meanwhile, LSPL@Zn||NH4 V4 O10 full cells deliver an ultralong cycling lifespan of 100 00 cycles with 0.0056% per cycle decay rate at 10 A g-1 . This self-adaptive layer provides a new strategy to improve the interface stability for next-generation aqueous Zn battery.

Atomic-Level Customization of Zinc Crystallization Kinetics at the Interface for High-Utilization Zn Anodes

Understanding the crystallization occurring at the inner interfaces during electrochemical deposition is crucial for achieving a high reversibility in zinc anodes. However, design rules for crystallization kinetics still lack predictive power, particularly at the atomic scale, posing a significant challenge. Herein, we propose a crystal facet terminating agent, LaCl3, which modulates the preferential crystallization orientation of Zn by regulating its growth kinetics through the synergistic adsorption of dual ions. Interface molecular dynamics (MD) simulations and crucial experimental parameters reveal that the strong (002) facet texture of Zn deposits primarily depends on the adsorption of strong inhibitors. Specifically, the high adsorption free energy of Cl- on the Zn (002) facet and the concomitant aggregation of La3+ reduces the growth rate of the Zn (002) facet, thereby favoring its preservation as the final crystal facet. Consequently, this terminating agent enables the Zn anodes to deliver a high cumulative capacity of 12 Ah cm-2 at 40 mA cm-2, 20 mAh cm-2. The Zn||MnO2 full cell, when coupled with a high-mass-loading cathode and limited Zn supply, can maintain a practical areal capacity of 3.39 mAh cm-2. Furthermore, rigorous testing conditions and the successful scaling up to a 0.34 Ah pouch cell further confirm its promising prospects for practical applications.

Design Strategies for Aqueous Zinc Metal Batteries with High Zinc Utilization: From Metal Anodes to Anode-Free Structures

Aqueous zinc metal batteries (AZMBs) are promising candidates for next-generation energy storage due to the excellent safety, environmental friendliness, natural abundance, high theoretical specific capacity, and low redox potential of zinc (Zn) metal. However, several issues such as dendrite formation, hydrogen evolution, corrosion, and passivation of Zn metal anodes cause irreversible loss of the active materials. To solve these issues, researchers often use large amounts of excess Zn to ensure a continuous supply of active materials for Zn anodes. This leads to the ultralow utilization of Zn anodes and squanders the high energy density of AZMBs. Herein, the design strategies for AZMBs with high Zn utilization are discussed in depth, from utilizing thinner Zn foils to constructing anode-free structures with theoretical Zn utilization of 100%, which provides comprehensive guidelines for further research. Representative methods for calculating the depth of discharge of Zn anodes with different structures are first summarized. The reasonable modification strategies of Zn foil anodes, current collectors with pre-deposited Zn, and anode-free aqueous Zn metal batteries (AF-AZMBs) to improve Zn utilization are then detailed. In particular, the working mechanism of AF-AZMBs is systematically introduced. Finally, the challenges and perspectives for constructing high-utilization Zn anodes are presented.

MXene-Based Mixed Conductor Interphase for Dendrite-Free Flexible Al Organic Battery

Al batteries are promising post-Li battery technologies for large-scale energy storage applications owing to their low cost and high theoretical capacity. However, one of the challenges that hinder their development is the unsatisfactory plating/stripping of the Al metal anode. To circumvent this issue, an ultrathin MXene layer is constructed on the surface of Al by in situ chemical reactions at room temperature. The as-prepared flexible MXene film acts like armor to protect the Al-metal by its high ionic conductivity and high mechanical flexibility. The MXene endow the Al anode with a long cyclic life of more than 5000 h at ultrahigh current density of 50 mA cm-2 for Al//Al batteries and a retention of 100% over 200 cycles for 355 Wh kg-1 PTO//Al batteries. This work provides fresh insights into the formation and regulation of stable electrode-electrolyte interfaces as well as effective strategies for improving Al metal batteries.

Electrocatalytic Urea Synthesis via N2 Dimerization and Universal Descriptor

Electrocatalytic urea synthesis through N2 + CO2 coreduction and C-N coupling is a promising and sustainable alternative to harsh industrial processes. Despite considerable efforts, limited progress has been made due to the challenges of breaking inert N≡N bonds for C-N coupling, competing side reactions, and the absence of theoretical principles guiding catalyst design. In this study, we propose a mechanism for highly electrocatalytic urea synthesis using two adsorbed N2 molecules and CO as nitrogen and carbon sources, respectively. This mechanism circumvents the challenging step of N≡N bond breaking and selective CO2 to CO reduction, as the free CO molecule inserts into dimerized *N2 and binds concurrently with two N atoms, forming a specific urea precursor *NNCONN* with both thermodynamic and kinetic feasibility. Through the proposed mechanism, Ti2@C4N3 and V2@C4N3 are identified as highly active catalysts for electrocatalytic urea formation, exhibiting low onset potentials of -0.741 and -0.738 V, respectively. Importantly, taking transition metal atoms anchored on porous graphite-like carbonitride (TM2@C4N3) as prototypes, we introduce a simple descriptor, namely, effective d electron number (Φ), to quantitatively describe the structure-activity relationships for urea formation. This descriptor incorporates inherent atomic properties of the catalyst, such as the number of d electrons, the electronegativity of the metal atoms, and the generalized electronegativity of the substrate atoms, making it potentially applicable to other urea catalysts. Our work advances the comprehension of mechanisms and provides a universal guiding principle for catalyst design in urea electrochemical synthesis.

Freestanding defective ammonium Vanadate@MXene hybrid films cathode for high performance aqueous zinc ion batteries

Aqueous zinc ion batteries (AZIBs) have gained extensive attention due to the numerous advantages of zinc, such as low redox potential, high abundance, low cost as well as high theoretical specific capacity. However, the development of AZIBs is still hampered due to the lack of suitable cathodes. In this work, the freestanding defective ammonium vanadate@MXene (d-NVO@MXene) hybrid film was synthesized by simple vacuum filtration strategy. Due to the presence of the hierarchical freestanding structure, outstanding MXene conductive networks and abundant oxygen vacancy (in the d-NVO nanoribbons), the d-NVO@MXene hybrid film can not only expose more active sites but also possess outstanding conductivity and kinetics of charge transfer/ion diffusion. When the d-NVO@MXene hybrid film was directly used as the cathode, it displayed a high specific capacity of 498 mAh/g at 0.5 A/g and superior cycling stability performance with near 100 % coulomb efficiency. Furthermore, the corresponding storage mechanism was elucidated by ex situ various characterizations. This work provides new ideas for the development of freestanding vanadium-based cathode materials for AZIBs.

Recent advances in electrospinning nanofiber materials for aqueous zinc ion batteries

Aqueous zinc ion batteries (AZIBs) are regarded as one of the most promising large-scale energy storage systems because of their considerable energy density and intrinsic safety. Nonetheless, the severe dendrite growth of the Zn anode, the serious degradation of the cathode, and the boundedness of separators restrict the application of AZIBs. Fortunately, electrospinning nanofibers demonstrate huge potential and bright prospects in constructing AZIBs with excellent electrochemical performance due to their controllable nanostructure, high conductivity, and large specific surface area (SSA). In this review, we first briefly introduce the principles and processing of the electrospinning technique and the structure design of electrospun fibers in AZIBs. Then, we summarize the recent advances of electrospinning nanofibers in AZIBs, including the cathodes, anodes, and separators, highlighting the nanofibers' working mechanism and the correlations between electrode structure and performance. Finally, based on insightful understanding, the prospects of electrospun fibers for high-performance AZIBs are also presented.

Crowding Effect-Induced Zinc-Enriched/Water-Lean Polymer Interfacial Layer Toward Practical Zn-Iodine Batteries

Although the meticulous design of functional diversity within the polymer interfacial layer holds paramount significance in mitigating the challenges associated with hydrogen evolution reactions and dendrite growth in zinc anodes, this pursuit remains a formidable task. Here, a large-scale producible zinc-enriched/water-lean polymer interfacial layer, derived from carboxymethyl chitosan (CCS), is constructed on zinc anodes by integration of electrodeposition and a targeted complexation strategy for highly reversible Zn plating/stripping chemistry. Zinc ions-induced crowding effect between CCS skeleton creates a strong hydrogen bonding environment and squeezes the moving space for water/anion counterparts, therefore greatly reducing the number of active water molecules and alleviating cathodic I3- attack. Moreover, the as-constructed Zn2+-enriched layer substantially facilitate rapid Zn2+ migration through the NH2-Zn2+-NH2 binding/dissociation mode of CCS molecule chain. Consequently, the large-format Zn symmetry cell (9 cm2) with a Zn-CCS electrode demonstrates excellent cycling stability over 1100 h without bulging. When coupled with an I2 cathode, the assembled Zn-I2 multilayer pouch cell displays an exceptionally high capacity of 140 mAh and superior long-term cycle performance of 400 cycles. This work provides a universal strategy to prepare large-scale production and high-performance polymer crowding layer for metal anode-based battery, analogous outcomes were veritably observed on other metals (Al, Cu, Sn).

Synergistic Modulation of In-Situ Hybrid Interface Construction and pH Buffering Enabled Ultra-Stable Zinc Anode at High Current Density and Areal Capacity

In aqueous electrolytes, the uncontrollable interfacial evolution caused by a series of factors such as pH variation and unregulated Zn2+ diffusion would usually result in the rapid failure of metallic Zn anode. Considering the high correlation among various triggers that induce the anode deterioration, a synergistic modulation strategy based on electrolyte modification is developed. Benefitting from the unique pH buffer mechanism of the electrolyte additive and its capability to in situ construct a zincophilic solid interface, this synergistic effect can comprehensively manage the thermodynamic and kinetic properties of Zn anode by inhibiting the pH variation and parasitic side reactions, accelerating de-solvation of hydrated Zn2+ , and regulating the diffusion behavior of Zn2+ to realize uniform Zn deposition. Thus, the modified Zn anode can achieve an impressive lifespan at ultra-high current density and areal capacity, operating stably for 609 and 209 hours at 20 mA cm-2 , 20 mAh cm-2 and 40 mA cm-2 , 20 mAh cm-2 , respectively. Based on this exceptional performance, high loading Zn||NH4 V4 O10 batteries can achieve excellent cycle stability and rate performance. Compared with those previously reported single pH buffer strategies, the synergistic modulation concept is expected to provide a new approach for highly stable Zn anode in aqueous zinc-ion batteries.

Maximizing Electrostatic Polarity of Non-Sacrificial Electrolyte Additives Enables Stable Zinc-Metal Anodes for Aqueous Batteries

Although additives are widely used in aqueous electrolytes to inhibit the formation of dendrites and hydrogen evolution reactions on Zn anodes, there is a lack of rational design principles and systematic mechanistic studies on how to select a suitable additive to regulate reversible Zn plating/stripping chemistry. Here, using saccharides as the representatives, we reveal that the electrostatic polarity of non-sacrificial additives is a critical descriptor for their ability to stabilize Zn anodes. Non-sacrificial additives are found to continuously modulate the solvation structure of Zn ions and form a molecular adsorption layer (MAL) for uniform Zn deposition, avoiding the thick solid electrolyte interphase layer due to the decomposition of sacrificial additives. A high electrostatic polarity renders sucrose the best hydrated Zn2+ desolvation ability and facilitates the MAL formation, resulting in the best cycling stability with a long-term reversible plating/stripping cycle life of thousands of hours. This study provides theoretical guidance for the screening of optimal additives for high-performance ZIBs.

Thickness-Controlled Synthesis of Compact and Uniform MOF Protective Layer for Zinc Anode to Achieve 85% Zinc Utilization

Zinc anode-based aqueous batteries have attracted considerable interest for large-scale energy storage and wearable devices. Unfortunately, the formation of Zn dendrite, parasitic hydrogen evolution reaction (HER), and irreversible by-products, seriously restrict their practical applications. Herein, a series of compact and uniform metal-organic frameworks (MOFs) films with precisely controlled thickness (150-600 nm) are constructed by a pre-oxide gas deposition (POGD) method on Zn foil. Under the protection of MOF layer with optimum thickness, the corrosion of zinc, the side reaction of hydrogen evolution, and the growth of dendrites on the zinc surface are suppressed. The symmetric cell based on Zn@ZIF-8 anode exhibits exceptional cyclicality for over 1100 h with low voltage hysteresis of≈38 mV at 1 mA cm-2 . Even at current densities of 50 mA cm-2 with an area capacity of 50 mAh cm-2 (85% Zn utilization), the electrode can keep cycling for >100 h. Besides, this Zn@ZIF-8 anode also delivers a high average CE of 99.4% at 1 mA cm-2 . Moreover, a rechargeable Zn ion battery is fabricated based on the Zn@ZIF-8 anode and MnO2 cathode, which presents an exceptionally long lifespan with no capacity attenuation for 1000 cycles.

Simultaneous Inhibition of Zn Dendrites and Polyiodide Ions Shuttle Effect by an Anion Concentrated Electrolyte Membrane for Long Lifespan Aqueous Zinc-Iodine Batteries

Aqueous zinc-iodine (Zn-I2) batteries have attracted extensive attention due to their merits of inherent safety, wide natural abundance, and low cost. However, their application is seriously hindered by the irreversible capacity loss resulting from both anode and cathode. Herein, an anion concentrated electrolyte (ACE) membrane is designed to manipulate the Zn2+ ion flux on the zinc anode side and restrain the shuttle effect of polyiodide ions on the I2 cathode side simultaneously to realize long-lifetime separator-free Zn-I2 batteries. The ACE membrane with abundant sulfonic acid groups possesses a multifunctional amalgamation of good mechanical strength, guided Zn2+ ion transport, and effective charge repulsion of polyiodide ions. Moreover, rich ether oxygen, carbonyl, and S-O bonds in anionic polymer chains will form hydrogen bonds with water to reduce the proportion of free water in the ACE membrane, inhibiting the water-induced interfacial side reactions of the Zn metal anode. Besides, DFT calculations and in-situ UV-vis and in situ Raman results reveal that the shuttle effect of polyiodide ions is also significantly suppressed. Therefore, the ACE membrane enables a long lifespan of Zn anodes (3700 h) and excellent cycling stability of Zn-I2 batteries (10000 cycles), thus establishing a substantial base for their practical applications.

Rational Design of Zincophilic Ag/Permselective PEDOT:PSS Heterogeneous Interfaces for High-Rate Zinc Electrodeposition

Designing artificial interface is a promising strategy to protect Zn metal anode but achieving long Zn plating/stripping lifespans and efficient nucleation/deposition kinetics, particularly at high current densities, remains a challenge. In this study, a permselective zincophilic heterogeneous interface consisting of metallic Ag layer and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is designed via a simple chemical displacement and drop casting process. The artificial interface plays a multifunctional role in inhibiting dendrite growth/side reactions by reducing the nucleation barrier through a large number of Zn nucleation sites offered by the bottom Ag layer, homogenizing electrical field/Zn2+ flux and shielding SO4 2- migration via the compact, conducting, and Zn2+ -permselective PEDOT:PSS supporting layer. Moreover, the heterogeneous interface demonstrates enhanced structural integrity owing to the binder effect of PEDOT:PSS. As a result, the modified Zn anode demonstrates a cyclic lifespan of 200 h and a reduced voltage hysteresis of ≈150 mV at 20 mA cm-2 /5 mAh cm-2 , far surpassing its counterparts. Moreover, the protected Zn anode allows the LiMn2 O4 -based full cells with remarkable rate and cycling performance. These findings provide new insight into the design of an efficient artificial interface for highly reversible and high-rate Zn electrodeposition.

Alleviating Side Reactions on Zn Anodes for Aqueous Batteries by a Cell Membrane Derived Phosphorylcholine Zwitterionic Protective Layer

Aqueous zinc (Zn) ion batteries are attractive for next generation batteries with high safety, yet their applications are still hindered by the uncontrollable dendrite formation and side reactions on Zn anode. Here, a polyzwitterion protective layer (PZIL) was engineered by polymerizing 2-methacryloyloxyethyl phosphorylcholine (MPC) in carboxymethyl chitosan (CMCS), which renders the following merits: the choline groups of MPC can preferentially adsorb onto Zn metal to avoid side reactions; the charged phosphate groups chelate with Zn2+ to regulate the solvation structure, further improving side reaction inhibition; the Hofmeister effect between ZnSO4 and CMCS can enhance the interfacial contact during electrochemical characterization. Consequently, the symmetrical Zn battery with PZIL can keep stable for more than 1000 hours under the ultra-high current density of 40 mA cm-2 . The PZIL confers the Zn/MnO2 full battery and Zn/active carbon (AC) capacitor with stable cycling performance under high current density.

Facile and effective defect engineering strategy boosting ammonium vanadate nanoribbon for high performance aqueous zinc-ion batteries

Vanadium-based oxides have gained widespread attention as promising cathode materials for aqueous zinc-ion batteries (AZIBs) due to their abundant valences, high theoretical capacity and low cost. However, the intrinsic sluggish kinetics and unsatisfactory conductivity have severely hampered their further development. Herein, a facile and effective defect engineering strategy was developed at room temperature to prepare the defective (NH₄)₂V₁₀O₂₅·8H₂O (d-NHVO) nanoribbon with plenty of oxygen vacancies. Owing to the introduction of oxygen vacancies, the d-NHVO nanoribbon possessed more active sites, excellent electronic conductivity and fast ion diffusion kinetics. Benefiting from these advantages, the d-NHVO nanoribbon as an aqueous zinc-ion battery cathode material exhibited superior specific capacity (512 mAh g^-1 at 0.3 A g^-1), excellent rate capability and long-term cycle performance. Simultaneously, the storage mechanism of the d-NHVO nanoribbon was clarified via comprehensive characterizations. Furthermore, the pouch battery based on the d-NHVO nanoribbon was fabricated and presented eminent flexibility and feasibility. This work provides a novel thought for simple and efficient development of high- performance vanadium-based oxides cathode materials for AZIBs.

Aspirin-Loaded Cross-Linked Lipoic Acid Nanodrug Prevents Postoperative Tumor Recurrence by Residual Cancer Cell Killing and Inflammatory Microenvironment Improvement

In addition to residual cancer cells, the surgery resection-induced hyperinflammatory microenvironment is a key factor that leads to postsurgical cancer recurrence. Herein, we developed a dual-functional nanodrug Asp@cLANVs for postsurgical recurrence inhibition by loading the classical anti-inflammatory drug aspirin (Asp) into cross-linked lipoic acid nanovesicles (cLANVs). The Asp@cLANVs can not only kill residual cancer cells at the doses comparable to common cytotoxic drugs by synergistic interaction between Asp and cLANVs, but also improve the postsurgical inflammatory microenvironment by their strongly synergistic anti-inflammation activity between Asp and cLANVs. Using mice bearing partially removed NCI-H460 tumors, we found that Asp@cLANVs gave a much lower recurrence rate (33.3%) compared with the first-line cytotoxic drug cisplatin (100%), and no mice died for at least 60 days after Asp@cLANV treatment while no mouse survived beyond day 43 in the cisplatin group. This dual-functional nanodrug constructs the first example that combines residual cancer cell killing and postoperative inflammation microenvironment improvement to suppress postsurgical cancer recurrence.