Rapid Melt-Quenching Enables General Synthesis of High-Loading Single-Atom Catalysts with Bicontinuous Nanoporous Structure

Ligand-induced hollow binary metal-organic framework derived Fe-doped cobalt-carbon nanomaterials for oxygen evolution

There is significant anticipation for high-efficiency and cost-effective non-precious metal-based catalysts to advance the industrial application of the anodic oxygen evolution reaction (OER) for hydrogen production. This study introduces an efficient strategy that utilizes ligand-induced metal-organic framework (MOF) building blocks for the synthesis of hollow binary zeolitic imidazolate frameworks 67 (ZIF-67) and Prussian blue analogues (PBAs) (ZIF-67@PBA) heterostructures through a hybrid MOF-on-MOF approach. Manipulating the Co2+/Zn2+ ratio in the precursor ZIF-67 allows for the convenient synthesis of the final product, denoted as CoxFe-ZP, after pyrolysis, where the inclusion of Zn effectively modulates the distribution of Co in the catalyst. The resulting CoxFe-ZP catalysts exhibit a positive synergistic effect between hollow graphitic carbon nanomaterials and Fe-doped Co nanoparticles. The optimal Co0.3Fe-ZP catalyst demonstrates satisfactory OER performance, achieving an overpotential of 302 mV at 10 mA cm-2 and a small Tafel slope of 60.0 mV dec-1. Further analysis of the activation energy confirms that the enhanced OER activity of Co0.3Fe-ZP can be reasonably attributed to the combined influence of its morphology and composition. This study demonstrates a ligand-induced method for examining the morphology and electrochemical properties of grown binary MOF-on-MOF heterostructures for OER applications.

Boron-Doped Dinickel Phosphide to Enhance Polysulfide Conversion and Suppress Shuttling in Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are promising for next-generation high-energy energy storage systems. However, the slow reaction kinetics render mobile polysulfides hardly controlled, yielding shuttling effects and eventually damaging Li metal anodes. To improve the cyclability of Li-S batteries, high-efficiency catalysts are desired to accelerate polysulfide conversion and suppress the shuttling effect. Herein, we studied a doping system with Ni2P and Ni2B as the end members and found a B-doped Ni2P catalyst that demonstrates high activity for Li-S batteries. As anionic dopants, B demonstrates an interesting reverse electron transfer to P and tunes the electronic structure of Ni2P dramatically. The resultant B-doped Ni2P exhibits short Ni-B bonds and strong Ni-S interaction, and the electron donation of B to P further enhances the adsorption of polysulfide on catalysts. The S-S bonds of polysulfides were activated appropriately, therefore decreasing a low energy barrier for conversion reactions.

General negative pressure annealing approach for creating ultra-high-loading single atom catalyst libraries

Catalyst systems populated by high-density single atoms are crucial for improving catalytic activity and selectivity, which can potentially maximize the industrial prospects of heterogeneous single-atom catalysts (SACs). However, achieving high-loading SACs with metal contents above 10 wt% remains challenging. Here we describe a general negative pressure annealing strategy to fabricate ultrahigh-loading SACs with metal contents up to 27.3-44.8 wt% for 13 different metals on a typical carbon nitride matrix. Furthermore, our approach enables the synthesis of high-entropy single-atom catalysts (HESACs) that exhibit the coexistence of multiple metal single atoms with high metal contents. In-situ aberration-corrected HAADF-STEM (AC-STEM) combined with ex-situ X-ray absorption fine structure (XAFS) demonstrate that the negative pressure annealing treatment accelerates the removal of anionic ligand in metal precursors and boosts the bonding of metal species with N defective sites, enabling the formation of dense N-coordinated metal sites. Increasing metal loading on a platinum (Pt) SAC to 41.8 wt% significantly enhances the activity of propane oxidation towards liquid products, including acetone, methanol, and acetic acid et al. This work presents a straightforward and universal approach for achieving many low-cost and high-density SACs for efficient catalytic transformations.

Core-bishell NiFe@NC@MoS2 for boosting electrocatalytic activity towards ultra-efficient oxygen evolution reaction

Designing and developing suitable oxygen evolution reaction (OER) catalysts with high activity and stability remain challenging in electrolytic water splitting. Hence, NiFe@NC@MoS2 core-bishell composites wrapped by molybdenum disulphide (MoS2) and nitrogen-doped graphene (NC) were prepared using hydrothermal synthesis in this research. NiFe@NC@MoS2 composite exhibits excellent performance with an overpotential of 288 mV and a Tafel slope of 53.2 mV·dec-1 at a current density of 10 mA·cm-2 in 1 M KOH solution, which is superior to commercial RuO2. NC and MoS2 bishells create profuse edge active sites that enhance the adsorption ability of OOH* while lowering the overall overpotential of the product and improving its oxygen precipitation performance. The density function theory(DFT) analysis confirms that the layered MoS2 in NiFe@NC@MoS2 provides additional edge active sites and enhances electron transfer, thus increasing the intrinsic catalytic activity. This research paves a novel way for developing OER electrocatalysts with excellent catalytic performance.

Platinum-Ruthenium Dual-Atomic Sites Dispersed in Nanoporous Ni0.85Se Enabling Ampere-Level Current Density Hydrogen Production

Alkaline anion-exchange-membrane water electrolyzers (AEMWEs) using earth-abundant catalysts is a promising approach for the generation of green H2. However, the AEMWEs with alkaline electrolytes suffer from poor performance at high current density compared to proton exchange membrane electrolyzers. Here, atomically dispersed Pt-Ru dual sites co-embedded in nanoporous nickel selenides (np/Pt1Ru1-Ni0.85Se) are developed by a rapid melt-quenching approach to achieve highly-efficient alkaline hydrogen evolution reaction. The np/Pt1Ru1-Ni0.85Se catalyst shows ampere-level current density with a low overpotential (46 mV at 10 mA cm-2 and 225 mV at 1000 mA cm-2), low Tafel slope (32.4 mV dec-1), and excellent long-term durability, significantly outperforming the benchmark Pt/C catalyst and other advanced large-current catalysts. The remarkable HER performance of nanoporous Pt1Ru1-Ni0.85Se is attributed to the strong intracrystal electronic metal-support interaction (IEMSI) between Pt-Se-Ru sites and Ni0.85Se support which can greatly enlarge the charge redistribution density, reduce the energy barrier of water dissociation, and optimize the potential determining step. Furthermore, the assembled alkaline AEMWE with an ultralow Pt and Ru loading realizes an industrial-level current density of 1 A cm-2 at 1.84 volts with high durability.

Noble-Metal-Free Single- and Dual-Atom Catalysts for Artificial Photosynthesis

Artificial photosynthesis enables direct solar-to-chemical energy conversion aimed at mitigating environmental pollution and producing solar fuels and chemicals in a green and sustainable approach, and efficient, robust, and low-cost photocatalysts are the heart of artificial photosynthesis systems. As an emerging new class of cocatalytic materials, single-atom catalysts (SACs) and dual-atom catalysts (DACs) have received a great deal of current attention due to their maximal atom utilization and unique photocatalytic properties, whereas noble-metal-free ones impart abundance, availability, and cost-effectiveness allowing for scalable implementation. This review outlines the fundamental principles and synthetic methods of SACs and DACs and summarizes the most recent advances in SACs (Co, Fe, Cu, Ni, Bi, Al, Sn, Er, La, Ba, etc.) and DACs (CuNi, FeCo, InCu, KNa, CoCo, CuCu, etc.) based on non-noble metals, confined on an arsenal of organic or inorganic substrates (polymeric carbon nitride, metal oxides, metal sulfides, metal-organic frameworks, carbon, etc.) acting as versatile scaffolds in solar-light-driven photocatalytic reactions, including hydrogen evolution, carbon dioxide reduction, methane conversion, organic synthesis, nitrogen fixation, hydrogen peroxide production, and environmental remediation. The review concludes with the challenges, opportunities, and future prospects of noble-metal-free SACs and DACs for artificial photosynthesis.

Ni Single Atoms Embedded in Graphene Nanoribbon Sieves for High-Performance CO2 Reduction to CO

Ni single-atom catalysts (SACs) are appealing for electrochemical reduction CO2 reduction (CO2 RR). However, regulating the balance between the activity and conductivity remains a challenge to Ni SACs due to the limitation of substrates structure. Herein, the intrinsic performance enhancement of Ni SACs anchored on quasi-one-dimensional graphene nanoribbons (GNRs) synthesized is demonstrated by longitudinal unzipping carbon nanotubes (CNTs). The abundant functional groups on GNRs can absorb Ni atoms to form rich Ni-N4 -C sites during the anchoring process, providing a high intrinsic activity. In addition, the GNRs, which maintain a quasi-one-dimensional structure and possess a high conductivity, interconnect with each other and form a conductive porous framework. The catalyst yields a 44 mA cm-2 CO partial current density and 96% faradaic efficiency of CO (FECO ) at -1.1 V vs RHE in an H-cell. By adopting a membrane electrode assembly (MEA) flow cell, a 95% FECO and 2.4 V cell voltage are achieved at 200 mA cm-2 current density. This work provides a rational way to synthesize Ni SACs with a high Ni atom loading, porous morphology, and high conductivity with potential industrial applications.

Boosting Photo-Electro-Fenton Process Via Atomically Dispersed Iron Sites on Graphdiyne for InVitro Hydrogen Peroxide Detection

Hydrogen peroxide (H2 O2 ) is essential in oxidative stress and signal regulation of organs of animal body. Realizing in vitro quantification of H2 O2 released from organs is significant, but faces challenges due to short lifetime of H2 O2 and complex bio-environment. Herein, rationally designed and constructed a photoelectrochemical (PEC) sensor for in vitro sensing of H2 O2 , in which atomically dispersed iron active sites (Hemin) modified graphdiyne (Fe-GDY) serves as photoelectrode and catalyzes photo-electro-Fenton process. Sensitivity of Fe-GDY electrode is enhanced 8 times under illumination compared with dark condition. The PEC H2 O2 sensor under illumination delivers a wide linear range from 0.1 to 48 160 µm and a low detection limit of 33 nm, while demonstrating excellent selectivity and stability. The high performance of Fe-GDY is attributed to, first, energy levels matching of GDY and Hemin that effectively promotes the injection of photo-generated electrons from GDY to Fe3+ for reduced Fe2+ , which facilitates the Fe3+ /Fe2+ cycle. Second, the Fe2+ actively catalyzes H2 O2 to OH- through the Fenton process, thereby improving the sensitivity. The PEC sensor demonstrates in vitro quantification of H2 O2 released from different organs, providing a promising approach for molecular sensing and disease diagnosis in organ levels.

Surface-Confined Ultra-Low Scale Pd Engineered Layered Co(OH)2 toward High-Performance Hydrazine Electrooxidation in Alkaline Saline Water

Applications of abundant seawater in electrochemical energy conversion are constrained due to the sluggish oxygen evolution reaction and the corrosive chlorine oxidation reaction. Hence, it is imperative to develop an efficient anodic reaction alternative suitable for coupling with the cathodic counterpart. Due to a low thermodynamic oxidation potential, hydrazine oxidation reaction (HzOR) offers a unique pathway to overcome these challenges. Herein, spontaneously in situ reduced atomic scale Pd surface-confined to electrochemically prepared layered Co(OH)2 on carbon cloth is synthesized. This study reveals the hydrazine and Pd-dependent morphological evolution of Co(OH)2 and its Pd hybrids into nanoparticulate form. Unlike various layered double hydroxides, Pd integrated Co(OH)2 benefits from the contribution of Co(OH)2 as an active HzOR catalyst and the reductive support to host Pd, resulting in synergistically improved performances. Mass activities of Pd in alkaline and alkaline saline electrolyte are 11.24 and 9.83 A mgPd -1 at 200 mV, respectively, corresponding to the highest HzOR activities among noble metals. The optimized Pd hybrid demonstrates ≈6.5 times the current density relative to PtC (14.91 mA cm-2 at 200 mV) in alkaline saline water with hydrazine. These findings would be beneficial to realize high overpotential anodic alternatives and reduce over-dependence on freshwater for electrocatalysis.