Actively Triggerable Metals via Liquid Metal Embrittlement for Biomedical Applications

Active Corrosion Triggered Liquid Metal Dewetting

Liquid metals (LMs), as an emerging group of functional materials, possess the necessary conditions for dewetting. However, LM dewetting garnered grossly inadequate attention. Here, an intriguing phenomenon termed active corrosion-triggered dewetting (ACT-Dewetting) of LMs is reported. Distinct from traditional dewetting which mainly depends on physical treatments (e.g., laser irradiation, evaporation) for initiation, the ACT-Dewetting couples mechanics, chemistry, and physics, which enables gallium (Ga)-based and Ga-free (e.g., fusible alloy) LMs spread on sacrificial metals (e.g., Al, Mg) readily dewet into numerous microdroplets in seconds along with substrate corrosion and gas emission. This gives birth to a novel method for fabricating LM microdroplets. Besides, due to the consistent metallic luster of painted LMs on various substrates and selective corrosion of substrates, ACT-Dewetting is demonstrated as an effective information encryption method. With these proof-of-concept illustrations, it is anticipated this ACT-Dewetting strategy would facilitate more innovative studies of LMs.

Disintegration of Thin Liquid Metal Films Engendered by Aluminum Corrosion

Liquid metals (LMs) illustrate a fantastic future. Thus, great endeavors are made to earn a comprehensive understanding of this fluid and carve it into a niche. Herein, by revisiting the combination of Ga-based LMs and aluminum (Al), a new phenomenon, namely the disintegration of LM films on encountering water, is identified. Deviating from previous investigations where the LM generally took the form of bulk puddles, the LM-Al slurry is spread as thin films here. In this case, Al debris embedded in the LM matrix hydrolyzes and therefore can exert disjoining pressure strong enough to split the thin film into countless tiny LM droplets. Based on this mechanism, transient circuits independent of substrate decomposition are realized. Furthermore, taking advantage of the portfolio strategy of pure LM and the LM-Al slurry, novel concepts of flood warning and information storage and encryption are demonstrated. Integrating these functions all in one demonstrates the versatility of the disintegration of thin LM films engendered by Al corrosion, which provides a scientific insight into ephemeral art and makes the Ga─Al combination more illuminating.

Magnetically Responsive Gallium-Based Liquid Metal: Preparation, Property and Application

Magnetically responsive soft smart materials have garnered significant academic attention due to their flexibility, remote controllability, and reconfigurability. However, traditional soft materials used in the construction of these magnetically responsive systems typically exhibit low density and poor thermal and electrical conductivities. These limitations result in suboptimal performance in applications such as medical radiography, high-performance electronic devices, and thermal management. To address these challenges, magnetically responsive gallium-based liquid metals have emerged as promising alternatives. In this review, we summarize the methodologies for achieving magnetically responsive liquid metals, including the integration of magnetic agents into the liquid metal matrix and the utilization of induced Lorentz forces. We then provide a comprehensive discussion of the key physicochemical properties of these materials and the factors influencing them. Additionally, we explore the advanced and potential applications of magnetically responsive liquid metals. Finally, we discuss the current challenges in this field and present an outlook on future developments and research directions.

Thiol Coordination Softens Liquid Metal Particles To Improve On-Demand Conductivity

Achieving tunable rupturing of eutectic gallium indium (EGaIn) particles holds great significance in flexible electronic applications, particularly pressure sensors. We tune the mechanosensitivity of EGaIn particles by preparing them in toluene with thiol surfactants and demonstrate an improvement over typical preparations in ethanol. We observe, across multiple length scales, that thiol surfactants and the nonpolar solvent synergistically reduce the applied stress requirements for electromechanical actuation. At the nanoscale, dodecanethiol and propanethiol in toluene suppress gallium oxide growth, as characterized by transmission electron microscopy and X-ray photoelectron spectroscopy. Quantitative AFM imaging produces force-indentation curves and height images, while conductive AFM measures current while probing individual EGaIn particles. As the applied force increases, thiolated particles demonstrate intensified softening, rupturing, and stress-induced electrical activation at forces 40% lower than those for bare particles in ethanol. To confirm that thiolation facilitates rupturing at the macroscale, a laser is used to ablate samples of EGaIn particles. Scanning electron microscopy and resistance measurements across macroscopic samples confirm that thiolated EGaIn particles coalesce to exhibit electrical activation at 0.1 W. Particles prepared in ethanol, however, require 3 times higher laser power to demonstrate a similar behavior. This unique collection of advanced techniques demonstrates that our particle synthesis conditions can facilitate on-demand functionality to benefit electronic applications.

Liquid Metal-Polymer Conductor-Based Conformal Cyborg Devices

Gallium-based liquid metal (LM) exhibits exceptional properties such as high conductivity and biocompatibility, rendering it highly valuable for the development of conformal bioelectronics. When combined with polymers, liquid metal-polymer conductors (MPC) offer a versatile platform for fabricating conformal cyborg devices, enabling functions such as sensing, restoration, and augmentation within the human body. This review focuses on the synthesis, fabrication, and application of MPC-based cyborg devices. The synthesis of functional materials based on LM and the fabrication techniques for MPC-based devices are elucidated. The review provides a comprehensive overview of MPC-based cyborg devices, encompassing their applications in sensing diverse signals, therapeutic interventions, and augmentation. The objective of this review is to serve as a valuable resource that bridges the gap between the fabrication of MPC-based conformal devices and their potential biomedical applications.

In-vivo integration of soft neural probes through high-resolution printing of liquid electronics on the cranium

Current soft neural probes are still operated by bulky, rigid electronics mounted to a body, which deteriorate the integrity of the device to biological systems and restrict the free behavior of a subject. We report a soft, conformable neural interface system that can monitor the single-unit activities of neurons with long-term stability. The system implements soft neural probes in the brain, and their subsidiary electronics which are directly printed on the cranial surface. The high-resolution printing of liquid metals forms soft neural probes with a cellular-scale diameter and adaptable lengths. Also, the printing of liquid metal-based circuits and interconnections along the curvature of the cranium enables the conformal integration of electronics to the body, and the cranial circuit delivers neural signals to a smartphone wirelessly. In the in-vivo studies using mice, the system demonstrates long-term recording (33 weeks) of neural activities in arbitrary brain regions. In T-maze behavioral tests, the system shows the behavior-induced activation of neurons in multiple brain regions.

Activated Metals to Generate Heat for Biomedical Applications

Delivering heat in vivo could enhance a wide range of biomedical therapeutic and diagnostic technologies, including long-term drug delivery devices and cancer treatments. To date, providing thermal energy is highly power-intensive, rendering it oftentimes inaccessible outside of clinical settings. We developed an in vivo heating method based on the exothermic reaction between liquid-metal-activated aluminum and water. After establishing a method for consistent activation, we characterized the heat generation capabilities with thermal imaging and heat flux measurements. We then demonstrated one application of this reaction: to thermally actuate a gastric resident device made from a shape-memory alloy called Nitinol. Finally, we highlight the advantages and future directions for leveraging this novel in situ heat generation method beyond the showcased example.

Liquid metal integrated PU/CNT fibrous membrane for human health monitoring

Wearable flexible sensors are widely used in several applications such as physiological monitoring, electronic skin, and telemedicine. Typically, flexible sensors that are made of elastomeric thin-films lack sufficient permeability, which leads to skin inflammation, and more importantly, affects signal detection and consequently, reduces the sensitivity of the sensor. In this study, we designed a flexible nanofibrous membrane with a high air permeability (6.10 mm/s), which could be effectively used to monitor human motion signals and physiological signals. More specifically, a flexible membrane with a point (liquid metal nanoparticles)-line (carbon nanotubes)-plane (liquid metal thin-film) multiscale conductive structure was fabricated by combining liquid metal (LM) and carbon nanotubes (CNTs) with a polyurethane (PU) nanofibrous membrane. Interestingly, the excellent conductivity and fluidity of the liquid metal enhanced the sensitivity and stability of the membrane. More precisely, the gauge factor (GF) values of the membrane is 3.0 at 50% strain and 14.0 at 400% strain, which corresponds to a high strain sensitivity within the whole range of deformation. Additionally, the proposed membrane has good mechanical properties with an elongation at a break of 490% and a tensile strength of 12 MPa. Furthermore, the flexible membrane exhibits good biocompatibility and can efficiently monitor human health signals, thereby indicating potential for application in the field of wearable electronic devices.