Cooperative Copper Single-Atom Catalyst in 2D Carbon Nitride for Enhanced CO2 Electrolysis to Methane

Structural Ni0-Niδ+ Pair Sites for Highly Active Hydrogenation of Nitriles to Primary Amines

Supported metal pair sites have sparked interest due to their tremendous potential as bifunctional catalysts. Here, we report the structural Ni0-Niδ+ pair sites constructed in a well-defined nanocrystal phase of Ni3P. These Ni0-Niδ+ pair sites exhibited a remarkable product formation rate of 123 molBA/molmetal/h for the hydrogenation of benzonitrile (BN) to benzylamine (BA). The heterogeneity of surface Ni atoms over the Ni3P crystal created two types of metal centers, Ni0 and Niδ+, with a specific spatial distance of 4-5 Å. The Ni0 site acted as the center for H2 activation, while the Niδ+ site served as the adsorption and activation center for the C ≡ N group. The highly efficient cooperation effect of Ni0-Niδ+ pair sites resulted in a TOF of 2915 h-1 in BN hydrogenation, which is 2.4 and 9.7 times higher than that over the mono-Ni0 and -Niδ+ sites, respectively.

Achieving Almost 100% Selectivity in Photocatalytic CO2 Reduction to Methane via In-Situ Atmosphere Regulation Strategy

Artificial photosynthesis, harnessing solar energy to convert CO2 into hydrocarbons, presents a promising solution for climate change and energy scarcity. However, photocatalytic CO2 reduction often terminates at the CO stage due to limited electron transfer capacity, hindering the formation of higher-energy hydrocarbons such as CH4. This study introduces, for the first time, an in-situ atmosphere regulation strategy, refined from molecular imprinting methodologies, using dynamically reacting molecules to precisely engineer photocatalytic surface sites for selective *CO adsorption and hydrogenation in CO2-to-CH4 conversion. Specifically, the single-atom Cu catalyst (Cu-SA-CO) is prepared by anchoring single-atom Cu onto defective TiO2 substrates (Cu-SA-CO) under a CO reduction atmosphere. Under illumination, the catalyst exhibited outstanding CH4 selectivity (almost 100%) and productivity (58.5 µmol g-1 h-1). Mechanistic investigations reveal that the coordination environment of the Cu single atoms is significantly affected by dynamically reacting molecules (CO and *CHxO) during synthesis, leading to a Ti-Cu-O structure. The structure, with the synergistic interaction between Cu single atoms and oxygen defects, significantly enhances *CO adsorption and hydrogenation, thereby promoting the formation of methane. This work pioneers the use of dynamically reactive molecules as imprinted templates to tune photocatalytic CO2 reduction selectivity, providing a novel avenue for designing efficient photocatalysts.

Fabrication of Nickel Single Atoms with Ionic Liquids by Only One-Step Pyrolysis for CO2 Electroreduction

Single-atom catalysts (SACs) are appealing for carbon dioxide (CO2) electroreduction with the utmost advantages; however, their preparation is still challenging because of the complicated procedure. Here, a novel Ni-based single-atom catalyst (Ni-BB-BD) is constructed from raw materials, [BMIM]BF4, [BMIM]DCN, and NiCl2·6H2O, directly without any precursor by only one-step pyrolysis. Ni-BB-BD achieves a maximum carbon monoxide Faradaic efficiency (FECO) of 96.5% at -0.8 V vs RHE, as well as long-term stability over 16 h. High current density up to -170.6 mA cm-2 at -1.0 V vs RHE is achieved in the flow cell along with a CO selectivity of 97.7%. It is identified that [BMIM]BF4 is the nitrogen source, while [BMIM]DCN is mainly taken as the carbon source. Theoretical studies have revealed that the rich nitrogen content, especially for the uncoordinated nitrogen, plays a critical role in lowering rate-limiting barrier height. This work develops a facile and effective strategy to prepare the SACs.

Solid Electrolytes for Low-Temperature Carbon Dioxide Valorization: A Review

One of the most promising approaches to address the global challenge of climate change is electrochemical carbon capture and utilization. Solid electrolytes can play a crucial role in establishing a chemical-free pathway for the electrochemical capture of CO2. Furthermore, they can be applied in electrocatalytic CO2 reduction reactions (CO2RR) to increase carbon utilization, produce high-purity liquid chemicals, and advance hybrid electro-biosystems. This review article begins by covering the fundamentals and processes of electrochemical CO2 capture, emphasizing the advantages of utilizing solid electrolytes. Additionally, it highlights recent advancements in the use of the solid polymer electrolyte or solid electrolyte layer for the CO2RR with multiple functions. The review also explores avenues for future research to fully harness the potential of solid electrolytes, including the integration of CO2 capture and the CO2RR and performance assessment under realistic conditions. Finally, this review discusses future opportunities and challenges, aiming to contribute to the establishment of a green and sustainable society through electrochemical CO2 valorization.

Challenges and Opportunities for Single-Atom Electrocatalysts: From Lab-Scale Research to Potential Industry-Level Applications

Single-atom electrocatalysts (SACs) are a class of promising materials for driving electrochemical energy conversion reactions due to their intrinsic advantages, including maximum metal utilization, well-defined active structures, and strong interface effects. However, SACs have not reached full commercialization for broad industrial applications. This review summarizes recent research achievements in the design of SACs for crucial electrocatalytic reactions on their active sites, coordination, and substrates, as well as the synthesis methods. The key challenges facing SACs in activity, selectivity, stability, and scalability, are highlighted. Furthermore, it is pointed out the new strategies to address these challenges including increasing intrinsic activity of metal sites, enhancing the utilization of metal sites, improving the stability, optimizing the local environment, developing new fabrication techniques, leveraging insights from theoretical studies, and expanding potential applications. Finally, the views are offered on the future direction of single-atom electrocatalysis toward commercialization.

Electron Localization-Triggered Proton Pumping Toward Cu Single Atoms for Electrochemical CO2 Methanation of Unprecedented Selectivity

Slow multi-proton coupled electron transfer kinetics and unexpected desorption of intermediates severely hinder the selectivity of CO2 methanation. In this work, a one-stone-two-bird strategy of pumping protons and improving adsorption configuration/capability enabled by electron localization is developed to be highly efficient for CH4 electrosynthesis over Cu single atoms anchored on bismuth vacancies of BiVO4 (Bi1-xVO4─Cu), with superior kinetic isotope effect and high CH4 Faraday efficiency (92%), far outperforming state-of-the-art electrocatalysts for CO2 methanation. Control experiments and theoretical calculations reveal that the bismuth vacancies (VBi) not only act as active sites for H2O dissociation but also induce electron transfer toward Cu single-atom sites. The VBi-induced electron localization pumps *H from VBi sites to Cu single atoms, significantly promoting the generation and stabilization of the pivotal intermediate (*CHO) for highly selective CH4 electrosynthesis. The metal vacancies as new initiators show enormous potential in the proton transfer-involved hydrogenative conversion processes.

Carbon Catalysts Empowering Sustainable Chemical Synthesis via Electrochemical CO2 Conversion and Two-Electron Oxygen Reduction Reaction

Carbon materials hold significant promise in electrocatalysis, particularly in electrochemical CO2 reduction reaction (eCO2 RR) and two-electron oxygen reduction reaction (2e- ORR). The pivotal factor in achieving exceptional overall catalytic performance in carbon catalysts is the strategic design of specific active sites and nanostructures. This work presents a comprehensive overview of recent developments in carbon electrocatalysts for eCO2 RR and 2e- ORR. The creation of active sites through single/dual heteroatom doping, functional group decoration, topological defect, and micro-nano structuring, along with their synergistic effects, is thoroughly examined. Elaboration on the catalytic mechanisms and structure-activity relationships of these active sites is provided. In addition to directly serving as electrocatalysts, this review explores the role of carbon matrix as a support in finely adjusting the reactivity of single-atom molecular catalysts. Finally, the work addresses the challenges and prospects associated with designing and fabricating carbon electrocatalysts, providing valuable insights into the future trajectory of this dynamic field.

Pyrolysis-free synthesis of a high-loading single-atom Cu catalyst for efficient electrocatalytic CO2-to-CH4 conversion

Electrocatalytic CO2-to-CH4 conversion provides a promising means of addressing current carbon resource recycling and intermittent energy storage. Cu-based single-atom catalysts have attracted extensive attention owing to their high intrinsic activity toward CH4 production; however, they suffer from uncontrollable metal loading and aggregation during the conventional pyrolysis process of carbon-based substrates. Herein, we developed a pyrolysis-free method to prepare a single-atom Cu catalyst anchored on a formamide polymer substrate with a high loading amount and well atomic dispersion through a mild polycondensation reaction. Owing to the isolation of copper active sites, efficient CO2-to-CH4 conversion is achieved over the single-atom Cu catalyst, along with the significant suppression of C-C coupling. As a result, the optimal single-atom catalyst with 5.87 wt% of Cu offers high CH4 faradaic efficiencies (FEs) of over 70% in a wide current density range from 100 to 600 mA cm-2 in the flow cell, together with a maximum CH4 partial current density of 415.8 mA cm-2. Moreover, the CH4 FE can reach 74.2% under optimized conditions in a membrane electrode assembly electrolyzer. This work provides new insights into the subtle design of highly efficient electrocatalyst for CO2 reduction.

Highly Stable Layered Coordination Polymer Electrocatalyst toward Efficient CO2 -to-CH4 Conversion

Cu2+ -based materials, a class of promising catalysts for the electrocatalytic carbon dioxide reduction reaction (CO2 RR) to value-added chemicals, usually undergo inevitable and uncontrollable reorganization processes during the reaction, resulting in catalyst deactivation or the new active sites formation and bringing great challenges to exploring their structure-performance relationships. Herein, a facile strategy is reported for constructing Cu2+ and 3, 4-ethylenedioxythiophene (EDOT) coordination to stabilize Cu2+ ions to prepare a novel layered coordination polymer (CuPEDOT). CuPEDOT enables selective reduction of CO2 to CH4 with 62.7% Faradaic efficiency at the current density of 354 mA cm-2 in a flow cell, and the catalyst is stable for at least 15 h. In situ spectroscopic characterization and theoretical calculations reveal that CuPEDOT catalyst can maintain the Cu2+ -EDOT coordination structurally stable in CO2 RR and significantly promote the further hydrogenation of *CO intermediates, favoring the formation of CH4 instead of dimerization to C2 products. The strong coordination between EDOT and Cu2+ prevents the reduction of Cu2+ ions during CO2 RR. The finding of this work provides a new perspective on designing molecularly stable, highly active catalysts for CO2 RR.